Tracking changes to LPK2 (Control Cycle)transaction

Hi,
We would like to track the changes made to the existing control cycle data.
The changes to the control cycle are performed through LPK2 transaction.
The transaction takes material, plant and supply area as inputs.
We would like to know for particular material, plant and supply area who,when and what data has been changed.
I appreciate your quick help in this regard.
Thanks in advance..

Transfer requirement
 LTBK Transfer requirement - header
 LTBP Transfer requirement - item
Transfer order
 LTAK Transfer order - header
 LTAP Transfer order - item
Master data - stock positions
 LQUA Quants
Inventory documents in WM
 LINK Inventory document header
 LINP Inventory document item
 LINV Inventory data per quant
These are the tables which are affected when you make the modifications.
Hope this helps you
Regards,
Pavan

Similar Messages

Deactivation of change replenishment in control cycle -KANBAN -reg

Hi,
Our requirement is typical
we give JIT call triggers through PK13N
Based on KANBAN qty , JIT call is triggered
we dont want the user to change the required qty in the JIt call through PJ02
though we have taken out the authorization for PJ02 , its possible to go to PK13N ....select the KANBAN card ---right click -KANBAN information-click on change replenishment ..its again taking to PJ02 screen though we have removed PJ02 authorization
here user is able to change the qty
how to arrest this ?
is it can be made grey (deactive ) through authorization ? which object and field are to be controlled ?
regards,
Madhu Kiran

a

A trigger blocking function for control cycle in Kanban

Hi,
I wantet to change the status in Kanban. I get this error u201CA trigger blocking function was defined for the control cycle in the replenishment strategyu201D. I don't want to set a period of blocking function. how can I deactivate it.
Thanks

Hi,
Pls. check the following setting :
First in PK13n ( KANBAN Board) check whether X is marked with KANBAN Number e.g. 1X.
If so then replenishment will not be triggered because KANBAN is locked.
To unlock the KANBAN pls do the following :
Go to -
> PKMC ( Control Cycle Maintanance) in Change Mode----> Select Control Cycle -> Go to Display Control Cycle ( Glass Icon)--> on top of details of kanban cycle choose option ---> Display Kanbans ( Spectacle Icon )
Select it and go inside : Inside pop up appearing check first Column : Lkln ( Lock Indicator).
Remove the tick in check box of lock indicator for respective KANBAN for which you want to trigger replenishment.
Pls. try above settings and revert back if still problem persists.
Reward if problem solved.
Regards,
Tejas
Edited by: Tejas Pujara on Aug 1, 2008 12:25 PM

KANBAN control cycle quantity changes tracking -reg

Hi,
Which tables and fields are to be used to knwo the changes in the kanban quantities in the control cycle of a part number
for a part number over a period of time what and all changes are done to the kanban quantity we would like to track
how to go about ?
pl guide
regards,
madhu kiran

Hi,
Try Table PKCH and field PKCMG.This would be your best bet.

How to track changes in a hyperion application for SOX control?

Hello all,
We have been working on identifying the best way on how to track changes in a hyperion application in regards to the SOX control.
The following areas have been identified as the main areas of an application where the changes are to be tracked:
Monthly data load from ODI
Calculation of data
Metadats change
Formula edit
Changes to reports
Changes to security
Can anybody please suggest the best ways to do this? Has anyone experienced this issue before?
Somebody suggested that there is hyperion auditing available.
Is there any other software that is available that can do this or just documenting the changes would be the best option?
Please suggest. Toyr response would be appreciated.
Thanks.

Shared Services allows the auditing of provisioning and life-cycle management activities to track changes to security objects and the artifacts that are exported or imported using Lifecycle Management Utility.
For Shared Services auditing, refer Page 129 of http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security.pdf
Planning Administrators can select aspects of the application for change tracking. For example, you can track changes to metadata, such as when users change a member property or add a currency. You can also track changes in data forms, business rules, workflow, users, access permissions, and so on.
For Planning auditing, refer Page 56 of http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin.pdf
HTH-
Jasmine.

Change control cycle record

Hi all,
Can anyone please tell me the transaction code or if some config. required to change my control cycle record.
I created one from PK01, now when I wish to edit it at PK02, it gives me the following error.
Control cycle from WM/PP may not be processed here
Message no. PK083
Diagnosis
Control cycles are created both for Kanban and for warehouse management. However, control cycles created for the warehouse management system may not be used in Kanban and vice versa.
Any help is appreciated
Rgds,

HI
I am also facing the same problem.
I am working on r/3 4.7
Please can any one help regarding this problem.
Thanks in advance

Stanging indicator change in control cycle after production order released

HI
We have MM PP interface active
i setup staging indicator 4 for one material via control cycle
Production order is created and released
now we would like to change staging indicator to 1 [pick parts]
how we reread control cycles data in production order
Thanks

Try: CO02 > Functions > Read PP master data

Control Cycles in LPK1 transaction

Hi experts,
Has anyone worked on Control Cycles(LPK1) in Data Conversion?
I need a little Functional and technical overview and what needs to be taken care while loading Control Cycles?
I searched on web But couldn't find all details.
Regards,
Rahul

SAP docu can be found here:
http://help.sap.com/saphelp_erp2005/helpdata/EN/c6/f841494afa11d182b90000e829fbfe/frameset.htm
control cycles can be created with and without material (just at plant level)
As it is a tiny little transaction, you can load it with LSMW using own recordings.

Change KANBAN Status Sequence in Control Cycle

Hi guys,
Can anyone please detail which are the implications if I should change the status sequence for a control cycle, which is in use now?
Regards,
Ileana

Hi
In the kanban process the actual sequence is
Wait>Empty>In process > Intransit> Full > In use>Empty.This is complete cycle
If ur present kanban bin status is "In use" then then u changed the sequence in the control cycle.
When ever u trigger the kanban card, then system move to control cycle and checks the kanban sequence by referring the standard sequence it move to next status.
Eg: Ur present sequence is like
Empty>In process> In -transit --> Full --> Empty
Now ur bin status is "Full" then u have changed the sequence in the control cycle.
New sequence is like
"Empty--> In process > Full> In use -->Empty"
Now u triggered the kanban card of " Full" status bin, then system refer first sequence in the control cycle and then standard sequence then status is changing to " In use"
Means when ever u change the sequence in the control cycle system checks the sequence in the control cycle by reference of standard sequence it will changes the bin status.
So if ur bin is in the "In -use " status, then what ever the next status in the sequence is taken when u trigger the kanban signal

BAPI /FM to create /change KANBAN control cycle

Hi
Is there any BAPI or FM to create or Change control cycle?
Thanks.

Check
BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
Short Text
    Create Event-Driven KANBAN for Control Cycle
Functionality
    With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
    The essential entry parameters are:
    o   Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
    o   Material quantity
    Information about the status change is issued.
    COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
    the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
Hope this helps.
Regards
Vinayak

KAMBAN: Change Status Sequence in Control Cycle

Hi guys,
Can anyone please detail which are the implications if I should change the status sequence for a control cycle, which is in use now?
Regards,
Ileana

Hi
In the kanban process the actual sequence is
Wait>Empty>In process > Intransit> Full > In use>Empty.This is complete cycle
If ur present kanban bin status is "In use" then then u changed the sequence in the control cycle.
When ever u trigger the kanban card, then system move to control cycle and checks the kanban sequence by referring the standard sequence it move to next status.
Eg: Ur present sequence is like
Empty>In process> In -transit --> Full --> Empty
Now ur bin status is "Full" then u have changed the sequence in the control cycle.
New sequence is like
"Empty--> In process > Full> In use -->Empty"
Now u triggered the kanban card of " Full" status bin, then system refer first sequence in the control cycle and then standard sequence then status is changing to " In use"
Means when ever u change the sequence in the control cycle system checks the sequence in the control cycle by reference of standard sequence it will changes the bin status.
So if ur bin is in the "In -use " status, then what ever the next status in the sequence is taken when u trigger the kanban signal

Issue with control cycle

Hello all,
Can somebody please tell me how to find who created a particular control cycle?
Is there a way to find the id of the person who created/modified a control cycle?
If yes, please tell me.
Thanks and Regards,
Umakanth.

Hi
Use Transaction AUT10 with T-codes PK01/PK02.
Give the period for which you want to find changes.
keep the changed by field open , i.e dont put your user id there.
and execute, you will get list of all changes done through creation or chage transaction of control cycle.
check it out and revert back for further discussion.
Hope it helps you.
regards
Ritesh

Manual Staging in control cycle TR creation WM/PP integration

Hi,
We defined Material Staging Indicator as 4 in Control Cycle
How do we trigger TR for this materials ly??? Do we need to create TR manually? OR any transaction which will allow to create TR automatically for desired quantities
When i go to Change production Order and WM pick list Requested quantiry/confirmed Quantory is Blank only requirement qty column has values
How i can enter quantities manually and trigger TR
Can i have in Prduction Order few materials manually staged and few option 1 [pick parts]

Let me rephrase
We are using Standard PP/WM integration to stage materials from warehouse to production Bins.
We defined Material Staging Indicator as 4 [Manual Staging] in Control Cycle of materials [as business wishes to move materials manually from warehouse to production Bins]
How do we trigger Transfer requests[TR] creation to initiate movement of raw materials from warehouse to Production bins.
Do we need to create TRu2019s manually? If yes How [As I understand TR doesnu2019t allow to move more than one material at a time from one Bin to another]
When i go to Change production Order and select WM pick list I could see Requested quantity and confirmed Quantity column are not getting filled only requirement qty column has values. All columns are grayed.
Can we have few materials manually staged and few via Staging indicator option 1 pick parts? so that all critical parts will be moved manually and others SAP to create TRu2019s automatically
PLEASE HELP

Report to track changes to infotypes prior to running the payroll interfac

wants a report to track changes to infotypes prior to running the payroll interface. The attached report looks like it should work but it returns nothing. Is there config that turns on "Track Changes": for select infotypes? If so, can they be activated for key infotypes so this report will run?
Name, Address, position, etc.
Not attendance and absence ITs.

Hi,
IMG Personnel Management Personnel Admin Tools Revision Set up change document:
This node has three items:
Infotypes to be logged
Field Group Definitions
Field Group Characteristics
Using these three options you define which infotypes you wish to log, then which fields, then you define which groups of fields are to be saved. Click each link, or see the sections below:
Infotypes to be logged
Here you define which PA infotype numbers you require logging. Select New Entries and enter a transaction class (A for Pers Admin, B for recruitment), then enter the infotype number and save.
Field Group Definition
When changes are made to a logged infotype, the field contents before and after are recorded. This is the very reason for logging the infotype, but there is an overhead in performance and disk space used so it needs to be given consideration. Typically you will want to record fields that are pay relevant.
Using the field group definition, you specify which fields you wish to record changes in. When any of the fields in the group are changed, all the fields in the group are saved. You can use an asterisk to log all the fields of the infotype but this is not recommended for space and performance, also there are many fields on an infotype that you will not be using, that will be saved also. Ideally you will pick individual fields of the infotype and enter them like so:
The field group number is a freely defined number you allocate to the group, it will be used in the next step. For normal use, simply pick any number not already used in that infotype. All fields with the same field group number are recorded in the log, even if they have not changed.
Click New Entries and enter the infotype number, field group number and field names that you wish to record.
Field Group Characteristics
When you have set up the field group numbers, use the field group characteristics to activate the logging of those fields. You can also specify a supplementary field group; this means that the contents of another field group can also be saved at the same time, even though the contents have not changed. In practise it is not used much. Simply select new entries, enter the transaction class, infotype, and in the DocFieldGr enter the number you assigned to the field names that you want to store, then enter L for Long Term Documents (short are not supported)
The Audit Report
To access the report showing the logged infotype changes, use the HR report tree available from various menu paths, including:
Main Menu Human Resources Pers Management Administration Info System Reports - Documents Infotype change logged changes in infotype data. (RPUAUD00).
When you run the report, select the infotypes you require, and select and execute.
Cheers
Prasanth

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Tracking changes to LPK2 (Control Cycle)transaction

Similar Messages

Maybe you are looking for