Trading Partner Interface TPI

Hello All,
I have created a custom trading partner interface class. Everything is working however the method getPartners() is being called about 30 times. Does anybody know what the reason is?
Information: I have customized the class: SimpleTPD
Thanks
Ismail

Hi Venu,
<b>Trading Partner:</b>  is used to eliminate inter company business transactions by specifying the group Company name in the respective Customer & Vendor Master records.
Rams.N
If this is helpful to you then assign me points

Similar Messages

  • Trading Partner Interface

    Hello all,
    Does anybody have experience with the Trading Partner Interface?
    I am trying to create a custom class that implements the trading partner interface. In this class I want to call an existing EJB to get the partners from the backend and display the values in the portal.
    But I don't know how this should work and whether this can work...
    Any ideas?
    Ismail

    I figured it out myself.
    Thanks

  • B2B integration with just one trading partner using a dedicated VPN channel

    Hi colleagues,
    We are working in a B2B integration escenario, where our company will just integrate with a service provider using a dedicated VPN channel, so we won't go out to internet, for that B2B communication we have identified 10 inbound + 9 outbound interfaces.
    Do we need to look into implemeting an document exchange protocol for that? Of course we need some ACK mechanism as there'll be SLAs in place. If so, what would it be the most appropiate? I've been reading about ebxml, rosettanet etc but still not very clear for me which level of customization you'll need in order to apply those protocols. If this is much and given the fact that we are just dealing with a trading partner and we won't scale this platform to use more parther in the future, would it be worthy to customize our own ACK mechanism?
    If relevant, in our side we use oracle fussion middleware, the trading partnel is using SAP IS-U. The message format will be standard XML, we haven't identified the need of any other formatting at the moment such EDI.
    I know this is a very open question, so any advices or recommendations on that are highly appreciated.
    Regards,

    Hello Dipal,
    There is a lilttle catch. Eventhough your Delivery channel which is used in the agreement for a specific trading partner specifies some IP/Port, you can dynamically send the message to some other IP as well. This is specified in the document.
    This will give a flexibility of sending the HL7 message not just to the end point which is mentioned in the agreement but also to any othere ip/port as driven by the ACTION_NAME field in the IP_MESSAGE type. However ACTION_NAME filed overrides the delivery channel information, hence at any point of time you can
    1. Send a message to the end point mentioned in the delivery channel and used in the agreement. In this case ACTION_NAME is null or
    2. Any dynamic end point driven by the ACTION_NAME.
    Hope this is clear.
    Rgds,Ramesh

  • ACC GL Posting idoc requires trading partner

    Hello all,
    I have created a new interface, which posts an ACC_GL_POSTING Idoc to SAP.
    However this idoc runs into error as follows:
    CLIA: Line item 000 - G/L account 5590041 has to be posted with trading partner.
    I know which trading partner this account has to be posted with. However this partner is used for multiple company codes.
    The document type is ZA. When I look in OBA7 the "Inter-company postings" checkbox is not ticked. The "Enter trading partner" checkbox is ticked.
    Do you have any tips for me? Are there some specific settings I should check? What options do I have to get this Idoc processed succesfully automatically?  Any help would be greatly appreciated.
    - Mike

    Hello Gaurav,
    Thanks for your fast response.
    I haven't defaulted the trading partner as the trading partner can vary for the same GL Account.
    I am trying to get GL Postings processed using the ACC_GL_POSTING idoc type. However I was wondering whether there is a way to avoid entering the trading partner manually. Or how it is possible to enter the trading partner manually when trying to use idoc processing.
    - Mike

  • Adding Trading Partner to Coding Block subscreen

    Hello All,
    The company that I work for have a need to add Trading Partner field to Coding Block subscreen to allow manual and in batch population of this field.  I have added Trading Partner to all custom coding block subscreens via transaction OXK1 but the field is still not available in FB01 when 'More' button is clicked in the document item.  It needs to be there because the standard SAP interface program RFBIBL00 expects it there for Account Type S.
    Could you please let me know how I can make this field available in the Coding Block subscreen?
    Thank you so much!

    Hi,
    Please check in field status group, see if you set the field "visible"
    Regards,
    Pole

  • Using a Trading Partner Directory Implementation for Companies

    Hello experts,
    I am looking into configuring delegate useradmin using companies.
    The UME approach requires a engine reboot and somhow doesnt fit our requirements.
    The second approach - "Trading partner directory implementation" seems feasible.
    To implement this do I need to have any additional Bussiness package or additional installation for my portal? The document does state that this approach is only available with SAP supplier relationship management. What does this mean??
    thanks,
    Vineeth

    Hello Peng Ronan,
    Did you have any success with your Trading Partner Directory?
    Our project includes ECC, CRM 5.1, SRM6.0 and Portal7.0. We have this CRM scenario where a customer (manager) logs on and approves one of his employees, already self-registered, as a customer Portal user. UME seems to support that scenario, but it can only retrieve company information from a SRM backend system using a custom implementation of the Trading Partner Directory interface. In our case it is a CRM scenario and CRM Business Partners are not replicated on SRM.
    What is that SRM Trading Partner Directory interface and how much effort is involved in this custom implementation?
    Does the portal need to restart for new Companies to be added?
    Is this only for EBP scenario?
    Is there a better way to update the list of companies in UME from a list of CRM Business Partner?
    Thanks

  • "Invalid Trading Partner Setup" Error for Invoice Inbound Propagation.

    Hi,
    I am trying to post xml data into the invoice interface tables through the link <http://<<server name>>:port/servlets/oracle.apps.ecx.oxta.ECXOTAInbound>.I have created an xml with repect to the transaction map. But when I post this xml i get an error in ecx error tables: ECX_INVALID_TP_SETUP. Though the trading partner setup is correct. I am unable to proceed further.
    Please provide your inputs, if anyone has worked on the similar scenario.
    thanks,
    Danish

    Please check the validation in GGB0.
    The document which you are trying to post is not matching as per the validation.

  • Partner interface process (pip) in BPM

    can you give an idea abt partner interface process (pip) in BPM???

    I think PIP is not related to ccBPm (XI related)
    Rather, it is related to business process for trading partners.
    See this
    http://www.service-architecture.com/web-services/articles/partner_interface_process_pip.html
    Regards,
    Prateek

  • Diffrent Trading partner in electronic bank statement

    Hi,
    our customer (ERP 5.0) needs for the same account in diffrent accounting areas more than on trading partner.
    Example:
    Account 1234567 - BUKRS 1000 - trading partner (VBUND) 100
    Account 1234567 - BUKRS 2000 - trading partner (VBUND) 200
    My problem is that VBUND is administrated in SKA1, so I can not save VBUND in database. And my second and main problem is - using the electronic bank statement FF_5 - in User Exit "EXIT_RFEBBU10_001" - there seems to be no interface vor the field VBUND.
    Does anybody have an idea?
    How can I assign the right VBUND addicted to the right BUKRS in the user exit?
    Thanks in advance.

    Hi,
    why not using substitution Rule,
    If Account 1234567 - BUKRS 2000 - trading partner (VBUND), Repleace with 100 to 200,
    it is very simple compare to User exit

  • Error msg . while creating a GR w.r.t. PO --"ENTER A VALID TRADING PARTNER"

    Hi ,
    While  creating a GR w.r.t. Purchase Order (MB01)  getting a following msg:
    "ENTER A VALID TRADING PARTNER "
    In Vendor Master : Partner function  has the vendor details
    OA     Ordering Address     
    VN     Vendor     
    PI     Invoice presented by     
    Any thread would be helpful .
    regards,
    chait

    Hi ,
    THere is no entry in field :Trading partner LFA1 -
    VBUND  
    ALso the vendor has acccount group : RMIT  :  Remit to Address
    PArtner functions are maintained in vendor master viz. OA ,VN , PI .
    regards,
    chait

  • Trading Partner for open item document prior to BCS implementation

    Dear Experts,
    We have just introduced BCS in our company currently. One of the difficulties the user are facing is that the open item (many of them - thousand open item with different currencies and exhange rate) prior to the introduction of BCS does not contain Trading Partner. This ended up that the adjustment on the Trading Partner has to be done in BCS regularly. The amount in value of adjustment is not fixed - since there could be subsequent payment that will clear the open item.
    I understand that TP cannot be changed once posted. Have read a lot in the SAP portal and forum.
    Question: Based on your experience, it there a way that I can overcome this problem? Could SAP somehow allow TP to be assigned to open item document prior to implementation of BCS?
    I hope I can get some answer, otherwise, our user has to diligently continue to put the adjustment until all the open items are cleared.
    Thank you.
    Regards
    Fauzi

    hi,
    Check whether the document type you are using to post is allowed to enter the trading partner.
    To check use the TCODe OBA7  and select the relevent document type. then select the check box enter trading partner under control data.
    and also check the customer you assigned for that posting key 01 is got assigned trading partner in the master record or not(TCOD XD02/XD03).
    thanks.

  • Copy Trading Partner to Asset line items from Vendor line items in F-90

    Dear Friends,
    I want to copy trading partner field from Vendor line item to other line items like Asset and Tax in T.code - F-90
    Client want to use Transaction type - 100
    Is it feasible?
    Thanks in advance

    try:
    1) substitution - tcode OBBH
    or
    2) open FI - menu FIBF tcode BF44
        - event 1120 or 1130
    A.

  • Trading partner error

    hi
    can any body tell me the solution that in vendor balance report one of the property trading partner is missing of one particular vendor i saw the date of creation of vendor master in r/3 it was already been updated, then in bw side i checked  the master data
    i found an error i fixed it up but sitll it is dhowing hash can any body tell me that will this record will updated in the next load or before
    thanks

    Hi,
    After making required changes to the master data in Bw side, did you run the attribute changerun program?
    Try running the attribute change run program which may help you.
    For running attribute change run, go to se37 and run the program  "RSDDS_AGGREGATES_MAINTAIN".
    give your infoobject as input and execute.
    hope this helps,
    Regards,
    Sri...

  • GL Account Balances by Trading Partner

    Hi All,
    Our client has a requirement wherein he wants to know if there is any standard report through which we can find out the GL Account Balances by Trading Partner i.e. the user wants to see the GL account Balnces Broken down by trading partner.
    We have tried Dynamic Selection in F.08. But it does not help.
    Thanks
    Nitin

    Hello Rohit,
    Thanks for your reply. Actually we have tried this option and we found that the Report that we are getting is giving us the Consolidated Figure for all the Trading Partner selected.
    What we wanted to know is supposed if a Particular GL account has a sale of USD 3000 then system should be able to give us the break up as below Trading Partner A-1000, Trading Partner 2000, i.e. we want the GL account balance to be bifurcated by Trading Partner.
    Is there any standard report to achieve the same or else we need to look into the BW to achieve the same.
    Thanks ans Regards

  • Trading partner Data missing in FBL3N report for GL stock account

    Hi All,
    Can anyone help me identify the reasons why I am not able to view trading partner data when I run FBL3N t-code to view the line items of my GL stock account?
    Many Thanks in Advance for your help,
    Vignesh

    Hi ,
    When I am able to view the Trading partner details when I run customised program (which pulls data from customised table). May I know the reason why I am not able to find out the same details when I run FBL3N T-code?
    In the given case, I pulled out details of stock by trading partner by running a customised program. I expected the same by running FBL3N for Stock GL account. But the details of trading partner is missing for many line items
    Many Thanks in Advance for your help,
    Vignesh

Maybe you are looking for