Transcoding Sessions unregistered with CUCM from standby gateway of CUBE with HA usingHSRP

I have 2 C2921 routers working fine untill I enbale CUBE with HA. After configureing HSRP on ethernet interface, the transcoding and conferencing resources were unregistered on HSRP standby router even though I bind the sccp ccm group to physical interface.
Raised Cisco TAC, but they also could not solve yet. Cisco TAC recommanded to have loopback or another interface.
I configure gi02/ without HSRP configuration, but still the transcoding and conferencing resources are not getting registered. Cisco TAC is still analysing the logs.
I am hoping I get resolution here. Configuration of standby router is below.
Building configuration...
Current configuration : 13985 bytes
! Last configuration change at 15:07:25 BST Fri Aug 1 2014
! NVRAM config last updated at 15:07:25 BST Fri Aug 1 2014
version 15.4
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
service internal
service sequence-numbers
hostname CHN-RT-VG01
boot-start-marker
boot system flash:c2900-universalk9_npe-mz.SPA.154-3.M.bin
boot system flash:c2900-universalk9_npe-mz.SPA.154-2.T1.bin
boot-end-marker
! card type command needed for slot/vwic-slot 0/0
card type e1 0 1
card type e1 0 2
logging queue-limit 10000
logging buffered 10000000
logging rate-limit 10000
no logging console
enable secret 4 XkK1t85uKpzHay4O0x8hP0rt1uO7UwNlcWBLwLAsn3Y
ipc zone default
association 1
no shutdown
protocol sctp
   local-port 5000
    local-ip 10.215.8.148
   remote-port 5000
    remote-ip 10.215.8.149
--More--         no aaa new-model
clock timezone BST 0 0
clock summer-time BST date Mar 28 1993 0:00 Oct 27 2035 23:59
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-select 1 E1 0/1/0
network-clock-select 2 E1 0/1/1
network-clock-select 3 E1 0/2/0
no ip domain lookup
ip domain name DILFLPROD.CO.UK
--More--         ip cef
ipv6 multicast rpf use-bgp
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-4ess
cts logging verbose
crypto pki trustpoint TP-self-signed-3464013556
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3464013556
revocation-check none
rsakeypair TP-self-signed-3464013556
crypto pki certificate chain TP-self-signed-3464013556
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33343634 30313335 3536301E 170D3132 31313232 30353530
30345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 34363430
31333535 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100FD06 30324087 5D131745 446B6933 963E32DB 4B3F78D3 C2627F7B A68792EA
0686B7C1 93B66C1A 2287DD72 26AC10BE F6B5DE89 CEF9C800 836DAD25 4A32FC52
99A65E45 FAD97919 4BD2CFC8 136EB9AC F7F21045 0A930247 0E72CE1B 1C00D1BD
59B83BED 73639AA5 C78A657B EC55F15B 5287703C 3ED94E47 492DFAD0 89934B27
5CD10203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 146F6961 3C46FDE7 C105ADBF 5C07A675 7F7B5828 E1301D06
03551D0E 04160414 6F69613C 46FDE7C1 05ADBF5C 07A6757F 7B5828E1 300D0609
2A864886 F70D0101 05050003 8181005E 509EACC9 67205643 133DD745 5A6E7C82
7AAE0766 C68C215B 6222A86F A08AC77D 1030664E F77F6CFB CF021C94 BC5FB190
FEA96EE9 5A502DC6 D4407467 9662683E CFDC1779 4016A9A0 32EF415D 6E21DF53
D710D173 7BFC300A FDEE54D8 36BBED28 05A6A752 652F2550 E6BC5896 D4EC222A
C82C1B2A 4FEF6ED3 44DE109E DD796E
--More--         quit
voice-card 0
dspfarm
dsp services dspfarm
voice call send-alert
voice service voip
mode border-element
allow-connections sip to sip
redundancy
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
early-offer forced
midcall-signaling passthru
g729 annexb-all
voice translation-rule 100
rule 1 /^44845..\(.....\)/ /\1/
rule 3 /^4411...\(....\)/ /2\1/
voice translation-profile LiveOpsInbound
translate called 100
voice translation-profile OutboundtoKolDDI
translate called 1
--More--         !
application
global
service alternate Default
license udi pid CISCO2921/K9 sn FCZ164760NP
hw-module pvdm 0/0
hw-module pvdm 0/1
username controller privilege 15 password 7 050F0F03284B4B070D04
username voiceadmin privilege 15 password 7 1514190501242F37243A3327
username shaums privilege 15 password 7 151602000D2D2E2A3C32
username 745162 privilege 15 password 7 08254542001E0019060A
username 256108 privilege 15 password 7 0124030858040B0A70
redundancy inter-device
scheme standby SB
redundancy
no keepalive-enable
notification-timer 60000
controller E1 0/1/0
pri-group timeslots 1-31 service mgcp
controller E1 0/1/1
pri-group timeslots 1-31 service mgcp
controller E1 0/2/0
pri-group timeslots 1-31 service mgcp
controller E1 0/2/1
pri-group timeslots 1-31 service mgcp
track 1 interface GigabitEthernet0/0 line-protocol
track 2 interface GigabitEthernet0/1 line-protocol
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description **Inside***
ip address 10.215.8.132 255.255.255.240
standby delay minimum 30 reload 60
standby version 2
standby 1 ip 10.215.8.135
standby 1 priority 50
standby 1 preempt
standby 1 name SB
standby 1 track 2 decrement 10
duplex auto
speed auto
interface GigabitEthernet0/1
description **Outside***
ip address 10.215.8.148 255.255.255.240
standby delay minimum 30 reload 60
standby version 2
standby 2 ip 10.215.8.150
standby 2 priority 50
standby 2 preempt
standby 2 track 1 decrement 10
duplex auto
speed auto
media-type rj45
--More--         !
interface GigabitEthernet0/2
ip address 10.215.8.164 255.255.255.240
duplex full
speed 1000
interface Serial0/1/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
interface Serial0/1/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
interface Serial0/2/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
no cdp enable
ip forward-protocol nd
--More--         ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip rtcp report interval 3000
ip route 0.0.0.0 0.0.0.0 10.215.8.129
ip sla auto discovery
ip sla 40001
udp-jitter 10.215.191.3 17000 source-ip 10.215.8.132 codec g729a codec-numpackets 100
tos 184
owner SW.IpSla.CHVISM0210.SolarWindsOrion
frequency 300
timeout 180000
threshold 1000
ip sla schedule 40001 life forever start-time now
ip sla 40003
udp-jitter 10.215.221.131 17000 source-ip 10.215.8.132 codec g729a codec-numpackets 100
tos 184
owner SW.IpSla.CHVISM0210.SolarWindsOrion
frequency 300
timeout 180000
threshold 1000
ip sla schedule 40003 life forever start-time now
no logging trap
snmp-server community m&9C4rd4L%mw RO 10
snmp-server community m&9C4rd4L%m RW 10
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps isdn ietf
snmp-server host 10.215.10.10 version 2c m&9C4rd4L%mw
snmp-server host 10.215.232.202 version 2c m&9C4rd4L%mw
tftp-server flash0:SCCP42.9-1-1SR1S.loads
tftp-server flash0:apps42.9-1-1TH1-16.sbn
tftp-server flash0:cnu42.9-1-1TH1-16.sbn
--More--         tftp-server flash0:cvm42sccp.9-1-1TH1-16.sbn
tftp-server flash0:dsp42.9-1-1TH1-16.sbn
tftp-server flash0:jar42sccp.9-1-1TH1-16.sbn
tftp-server flash0:term42.default.loads
tftp-server flash0:term62.default.loads
tftp-server flash0:/c2600-ipvoicek9-mz.124-25d.bin
access-list 23 permit 10.10.10.0 0.0.0.7
control-plane
voice-port 0/1/0:15
voice-port 0/2/0:15
voice-port 0/1/1:15
voice-port 0/2/1:15
mgcp
mgcp call-agent 10.215.8.7 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
--More--         mgcp behavior comedia-sdp-force disable
mgcp profile default
sccp local GigabitEthernet0/2
sccp ccm 10.215.8.7 identifier 1 priority 1 version 7.0
sccp ccm 10.215.8.6 identifier 2 priority 2 version 7.0
sccp ccm group 1
bind interface GigabitEthernet0/2
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 2 register CFBCHEVG1
associate profile 1 register XCODERCHEVG1
ccm-manager music-on-hold
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.215.8.6
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager config server 10.215.8.6
ccm-manager config
dspfarm profile 1 transcode
codec g729r8
codec ilbc
codec pass-through
codec g722-64
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 70
associate application SCCP
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
--More--         codec g729ar8
codec g711alaw
codec g711ulaw
codec g722-64
codec ilbc
maximum sessions 10
associate application SCCP
dial-peer voice 1 pots
description **Incoming Dial Peer**
incoming called-number .
direct-inward-dial
dial-peer voice 2 pots
description **Outbound Dialpeer**
translation-profile outgoing OutboundtoKolDDI
destination-pattern 02083917600
incoming called-number .
port 0/1/1:15
dial-peer voice 3 pots
description **Outbound Dialpeer**
translation-profile outgoing OutboundtoKolDDI
destination-pattern 02083917600
incoming called-number .
port 0/2/0:15
dial-peer voice 4 pots
description **Outbound Dialpeer**
translation-profile outgoing OutboundtoKolDDI
destination-pattern 02083917600
incoming called-number .
port 0/2/1:15
dial-peer voice 100 voip
description to-DorkingCUCM
translation-profile outgoing LiveOpsInbound
destination-pattern 44..........
session protocol sipv2
session target ipv4:10.156.125.2
--More--         incoming called-number .
voice-class sip bind control source-interface GigabitEthernet0/0
voice-class sip bind media source-interface GigabitEthernet0/0
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 200 voip
description to-LiveOpsCCC
preference 1
destination-pattern .T
session protocol sipv2
session target ipv4:x.x.x.x
incoming called-number 44..........
voice-class sip bind control source-interface GigabitEthernet0/1
voice-class sip bind media source-interface GigabitEthernet0/1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 300 voip
description to-LiveOpsCCC
preference 2
destination-pattern .T
session protocol sipv2
session target ipv4:x.x.x.x
incoming called-number 44..........
voice-class sip bind control source-interface GigabitEthernet0/1
voice-class sip bind media source-interface GigabitEthernet0/1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 101 voip
description to-ChessingtonCUCM
translation-profile outgoing LiveOpsInbound
preference 1
destination-pattern 44..........
session protocol sipv2
session target ipv4:10.215.8.7
--More--         incoming called-number 40008
voice-class sip bind control source-interface GigabitEthernet0/0
voice-class sip bind media source-interface GigabitEthernet0/0
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 102 voip
description to-ChessingtonCUCM
translation-profile outgoing LiveOpsInbound
preference 2
destination-pattern 44..........
session protocol sipv2
session target ipv4:10.215.8.6
incoming called-number 40008
voice-class sip bind control source-interface GigabitEthernet0/0
voice-class sip bind media source-interface GigabitEthernet0/0
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 103 voip
description to-DorkingCUCM
preference 1
shutdown
destination-pattern 25544
session protocol sipv2
session target ipv4:10.156.125.2
incoming called-number .
voice-class sip bind control source-interface GigabitEthernet0/0
voice-class sip bind media source-interface GigabitEthernet0/0
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 104 voip
description to-ChessingtonCUCM
translation-profile outgoing LiveOpsInbound
preference 1
shutdown
--More--         destination-pattern 40008
session protocol sipv2
session target ipv4:10.215.8.7
incoming called-number .
voice-class sip bind control source-interface GigabitEthernet0/1
voice-class sip bind media source-interface GigabitEthernet0/1
dtmf-relay rtp-nte
codec g711ulaw
no vad
gateway
media-inactivity-criteria all
timer receive-rtcp 5
timer receive-rtp 1200
gatekeeper
shutdown
banner login ^CC
"This system and components thereof is the sole and exclusive property of Diligenta and is intended solely for the usage of its authorized administrators. Unauthorized access or use will attract appropriate legal action.
Access would be bound by Diligenta policies and could be monitored. Do not use this system, if the terms are not acceptable."
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
privilege level 15
login local
--More--         transport input ssh
line vty 5 15
privilege level 15
login local
transport input ssh
scheduler allocate 20000 1000
end

I don't have an answer for you but would like to add a note. I was initially configuring and troubleshooting some things on a HA cube pair recently. I was using external DNS for some dial-peer session target lookup and noticed the non-active CUBE could not lookup DNS. When the non-active CUBE became active it could all of a sudden resolve DNS. So I am speculating that something to do with the HA configuration is disallowing communication or bindings preventing routing to the rest of the network from the non-active CUBE. I ended up putting local host records on the router to make me feel better. I am guessing whatever is causing that might be related to the reason your SCCP is loosing registration on the non-active CUBE.
Jaime says what you are trying to do is not supported anyway. I would like a a little clarification on that but what I believe to be supported is if you need transcoding or mtp resources for this CUBE only (Not registered to UCM) then LTI is a good option.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/115018-configure-cube-lti.html
Hope any of this helps. I am really commenting so I can track any updates to this thread. :)

Similar Messages

K8t Neo2 problem with resume from standby after BIOS flash

Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail. Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby. The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way. Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%. The only way to get it back down to normal again seems to be to reboot. By Contrast Hibernation works fine, with no increase in cpu load after resume. I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers. Any ideas what is going on?

Noticed last night that S! standby seems to work OK. Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem). The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem. However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present. This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it. Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

Problems with waking from standby (suspend to disk)

Hello,
I have a late-2010 MacBook Air 11.6". I am running Lion 10.7.2.
To save battery life and also increase data protection via FileVault 2, I set the hibernatemode to 25 (alwas immediately suspend to disk) and enabled destruction of the FV key on standby (pmset -a hibernatemode 25 DestroyFVKeyOnStandby). Suspending works fine; and when I open the lid to resume from standby, I get the password prompt for FileVault's full disk encryption. After entering the password, the resume process starts. But then in some cases, my display stays black and I cannot turn it on again (tried closing/opening the lid, pressing Ctrl+Shift+Eject, connecting external monitor, ...)
If this behavior occurs, I can find entries like the following in my kernel.log:
Dec 23 13:30:15 mba kernel[0]: NVDA::setPowerState(0xffffff800c6b3000, 0 -> 2) timed out after 61662 ms
Is that a hardware bug? Any idea how I could possibly work around it?
Any help would be greatly appreciated!
Best Regards

Hi Aaron,
Check this blog and follow the steps mentioned, let us know if it works:
Something happened and the install of Windows 8.1 can't be completed. (And now you're annoyed)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problems with migration from CS5 to 5.5 with Blackmagic Card

Hallo liebes Forum, wir haben massive Probleme nach einem reibungslosen Import von CS 5 Projekten nach CS 5.5
Einziger Unterschied - jetzt ist eine Blackmagic Karte HD Extreme 3D im System.
TL muss auf BM stehen und BM Player in den Voreinstellungen eingestellt - ist klar.
Problem: es lassen sich keine Videos im Quellfenster mehr ansehen. Siehe Bild
Anwendung hängt sich beim Verlassen auf.
Patches von BM und CS55 sind neu.
Mit bitte um Hilfe grüsst freundlich der Sven

Ich habe gesehen dass du diese Frage auch schon in Englisch gestellt hast, aber die Lösung ist wahrscheinlich in dem BM Treiber zu suchen.

Procedure to delete archive log from standby server

Hi
We are using oracle10g(10.2.0.3) and we configured dataguard .
I want to know procedure to delete applied archive log from standby server?
Thanks
With Regards
umair

[Delete Applied Archivelogs on Standby Database |http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html]
http://tinyurl.com/p2krga
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Resume from Standby not by opening the cover

Hello,
I'm using Arch with KDE4. Standby really works fine with my Dell XPS1530 but it wakes up as soon as I open the cover. I would like to resume by clicking the power button.
(If I'm not using the battery but the power plug I have to use the button instead of open the cover.)
Anyone knows where I can configure that?
thanks in advance,
Jan

this is a behavior of the xps m1530. the only thing you can do, is to check the bios settings...

Starting PG with CUCM PIM causes conflict with previous PG with CUCM PIM

So far I've got running PG1 with CUCM and CVP PIMs, and PG5 with CUCM and VRU PIM (for 3rd party VRU). They both seem to be running well.
Now I've added PG6 with CUCM and VRU PIMs, and when it is started, PG6 causes conflict with PG5 - rtr log shows right away that PG5 CUCM PIM got disconnected, not operational, and offline.
Is there some limit on the number of times CUCM PIM can be added to various PGs?
The system is Cisco UCCE 9.0.
Thanks in advance.

But I am actually running several more PGs on the same system but they all VRU PGs.
I've got PG4, PG7 VRU running.
Does VRU fall into a different category?
BTW, we have another system UCCE 10.5 and my co-worker claims that he could not create 3rd PG, the system only allowed him 2 PGs per system.
On the system that I am using that is UCCE 9.0.3, I can create as many PGs as I want - the system does not limit PGs at all.
Is this something new with 10.5? Or is it different configuration mode (production versus development)?
Thanks.

Mail from Macbook Pro not syncing with iPhone

I am trying to set up my Mail account (which is set with Gmail) from my computer to sync with my iPhone. Unfortunately the iPhone goes is synced with Gmail and says that I have over 2000 emails. How can I get my iPhone to sync with my Mail app from my computer?
Also, I have deleted the account from my iPhone, but it still shows up on my iTunes. When I sync the iPhone, the mail settings are put back into my iPhone. How can I erase the gmail settings from my iTunes?
Thanks for your help.
Jude

You don't sync account mailboxes and messages with the email client used on your computer for accessing the account via the iTunes sync process. You can transfer account setup info only from your computer to your iPhone via the iTunes sync process.
Using the iPhone's mail client to access an email account is no different from using the Mail.app on your Mac for accessing the account. With a POP account, new messages recieved at the incoming mail server are downloaded, and when accessing a POP account with a new email client for the first time, all messages that remain at the incoming mail served for the account will be downloaded as new messages, since the new email client being used has never accessed the account - in this case, with the iPhone's mail client.
With an IMAP account, all server stored mailboxes are kept synchronized with the server automatically with each email client used to access the account.
You deselect transferring the account settings for this account from your computer to your iPhone at the same place where you selected this - under the Info tab for your iPhone sync preferences with iTunes.

Verizon Quantum Gateway has conflict with Airport Express

Does anyone have a problem with the Verizon Quantum Gateway in conflict with the Airport Express.

ranamaska wrote:
Can you tell me exactly how to do this?
Or
Should Verizon have this instruction for me to find?
Just ignore the verizon.. it really should not be a major issue.
If you are having problems fixing the channels in one router should then solve the problem by forcing the other router to use different channels.
I cannot tell you how to fix the verizon anyway as I have no idea what it is nor can i get one to play with.
Anyhow reset the Express to factory and start over.. the utility get it right most of the time.. and all you need to do is tweak the values.
I strongly recommend you use all short names, no spaces and pure alphanumerics.. password the same but 8-20 characters.
So do the setup with Express WAN port plugged into the LAN port of the Verizon router.
When you are finished.. click on the Express in the airport utility and click on Edit.. I don't have an express but the setup is identical for my Time Capsule.
When you click edit you will get the full manual setup.
Looks like this.. first tab is Base Station where you set name and password.
Go to the Network tab.. it must be bridged.
Go to the Wireless Tab. And you must Create a wireless network..
Down the bottom of that page is wireless options.. (sorry I cut it off in the screenshot).
This allows you to set a different name for 5ghz.. up to you.. I prefer doing this but it is perfectly fine not to.
At the bottom it shows wireless channels are set to automatic.
Click that and fix it ..
Here is my actual current setup.
Once you complete this setup.. you can reboot the Verizon modem router.. that will give it a chance then to reset its wireless and you should then be able to clearly see what is happening..
Use the tools apple has given you .. in Mac OS since Mountain Lion an excellent wireless survey program is built in.
About Wireless Diagnostics - Apple Support
Start the utility and do a scan and then you will see all the channels and signal levels you have available in the area.
You can also check the performance of the link you are using.

Integrating Essbase cubes with Oracle Tables in BI Server

I'm trying to link together data from an aggregated Essbase Cube with some static table data from our oracle system. Both the essbase and oracle data exist correctly in their own right in the physical, business and presentation levels. Aggragted data is client sales, static data is client details
Within the OBIEE Administration tool I've tried to drag the physical oracle table for clients onto the clients essbase section in the business area, and it seems to work OK, until you try and report on them together and I get the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
Can anyone advise on what I'm doing wrong?
Thanks

Thanks Christian I found some very useful articles (one or two by you) - I'll have to look harder on the net before posting.
One thing I found out, with respect to vertical federation, that others may benefit from, is that I fuond it much easier to start from the most detailed level and then attach the less detailed source rather start with the less detailed and add the additional on.

Standby PRI not working with voice Gateway Router & CUCM

Hi ALL ,
GOOD Day all of you .
I am facing a big problem i.e standby PRI not working with VG & CUCM , I have checked all the configuration parameter on VG & CUCM found ok but I am unable to make any call from standby link also incoming not come on the standby link . When I make a call on my Pilot no but getting busy tone .
I observer the some errors on VG like Cause i = 0x8286 - Channel unacceptable on my second PRI channel .
Please help me to reslove this proem .
Following are the PRI configuration Parameter on CUCM .
Product Specific Configuration Layout
Line Coding : HDB3
Framing : NON CRC4
Clock : External
Input Gain (-6..14 db) 0
Output Attenuation (-6..14 db) 0
Echo Cancellation Enable
Echo Cancellation Coverage (ms) 64
PRI configuration on VG
interface Serial0/0/1:15
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
BR,
SANDIPAN

Hi Craig ,
Thanks for your reply .
We are using the full 30 channel E1 PRI .
following are PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 1
   Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Please find following debug error
VG_RO_01#isdn test call interface serial 0/0/0:15 09665484798
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=5
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=4
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=4
Mar 7 03:00:54.574: ISDN Se0/0/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=5
CCIL_PUNE_DR_VG_RO_01#
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 09665484798
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=4
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:00:56.006: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=4 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:00:56.022: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:01:00.007: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=5 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=7 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x0084
Cause i = 0x80E6 - Recovery on timer expiry
Mar 7 03:01:03.995: ISDN Se0/0/0:15 **ERROR**: CCPCC_CallOrigination: SETUP timed-out (2nd T303) to NETWORK. The SETUP failed.
BR ,
SANDIPAN

How Do You Assume A Session From Event Gateways?

I am using event gateways to send and receive via SMS, IM,
and Email. I can go back and forth just fine, and if the client
initiates the session, session persistence is not a problem.
Sometimes, though, we need the server to initiate the session
and the client to assume that session so we don't have to
re-establish the thread before we move on.
For example, if the client says "Approve John Doe" for
something, the bot can respond with "John Doe found. Reply with A
for admin rights, W for web rights", and so on. Because the client
established the session, replies are cemented in the bots brain so
they know if an "A" is returned, it will give John Doe Admin
access.
The trouble is if the SERVER initiates the call to the IM
Client: "This is the server speaking. John Doe is attempting to
access the double-secret files. Reply with A to Allow or X to send
10,000 volts to their computer". Reply with A and the bot will
respond with, basically, "request unknown" because the client
actually initiated a new session and nothing the server said was
heard or can be viewed by the client.
When the server creates a session in the event gateway, there
also appears to be no sessionid, cfid, or cftoken. Especially for
SMS, it's difficult to pass a UUID or specially coded variable for
the client to use to at least search and retrieve the particulars
of the event.
So, how does one get a CLIENT IM, Email or SMS to assume the
Session from the server?
Alternative solutions welcomed!
RLS

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Remote C2901 MGCP gateway won't register with CUCM

Hi, all,
We have a central call manager, we are setting up a remote office with a C2901 voice gateway that has a T1 PRI, this gateway is being configured as a H.323 gateway, everything worked fine. Now I want to get SRST working such that when WAN goes down, employees can still make outbound calls and take inbound calls. I followed SRST documentations when configuring CUCM and C2901, I would say the documentations are clear and easy to follow -- only thing is there is no adequate explanation of why those commands need to be there and I can not get SRST to work.
1), First, a basic concept question, why do we need to configure "ccm-manager fallback-mgcp"? or any MGCP related configuration on C2901? how does MGCP play the role in SRST? the router is configured as a simple voice gateway, when WAN is intact, we use H.323 protocol, when WAN goes down, we still don't need MGCP ...
2), Assuming that we needed all those SRST related MGCP configuration, I would expect C2901 to register to call manager, but I could not get this device to register as a MGCP gateway, debug mgcp packets shows:
*Sep 5 16:52:47.571: MGCP Packet sent to 10.128.181.5:2427--->
RSIP 201356931 *@voicegw-remoteoffice.local.domain MGCP 0.1
RM: restart
<---
*Sep 5 16:52:47.631: MGCP Packet received from 10.128.181.5:2427--->
500 201356931
<---
I verified the domain name is exactly the same as the name configured on CUCM, I tried multiple time toggling ip domain name on C2901 also, somehow CUCM does not like RSIP message from C2901, I don't have knowledge to get debug information from CUCM side of why CUCM does not like the MGCP message sent by C2901
3), When the communication is blocked from C2901 to central call manager (by using a simple ACL on C2901's default gateway device), I can still make the inbound call to an IP phone, which means, phones were correctly registered to C2901 when communication to call manager is broken, but I can not make outbound call, phones always get quick busy beeps, test call from C2901 itself (by using "csim start") is fine, which means dial-plan and ISDN/PRI is fine.
I believe we are just doing very very basic configuration and this is a common scenario, what could I do wrong?

You dont need the mgcp related commands if you are using H323. The commands that you need are:
application
global
service alternate default
call-manager-fallback (or) telephony-service and the relevant commands under it.
Also make sure that SRST reference has been added to the DP and the phones reset after the change made. This is what tell the phone to register to the SRST gateway when the WAN is down. The IP specified in the SRST reference should match whats configured under call-manager-fallback.

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Transcoding Sessions unregistered with CUCM from standby gateway of CUBE with HA usingHSRP

Similar Messages

Maybe you are looking for