Transfer rules for Functional Location hierarchy

Hi
I am trying to install Transfer rules for 0FUNC_LOC_HIER from BI Content.
But i could not find any .
Where do i can find T/Rs or Is there any procedure for that ?
Regards
sateesh

Hi Sateesh,
I am not sure if the hierarchy datasource 0FUNC_LOC_HIER supports the transfer methog PSA,
if it only supports IDoc then its will not have transfer rules that you can maintain. You can
check in table ROOSOURCE in the source system (field transfer method) to see if the datasource supports
PSA transfer methd. If it does then you could create your own transfer rules.
Best Regards,
Des

Similar Messages

Strat routine code in transfer rules for the Extractor - 0CO_OM_CCA_1

Dear SDNers,
I have a scenario to implement a start rouine code in the transfer rulesfor the Extractor - 0CO_OM_CCA_1 , please give a light on this.
Scenario:
The extractor 0C0_OM_CCA_1 brings in Cost Center transactional data for costs and allocation into the SAP BI data warehouse. A cross reference table will be created in SAP BI for Profit Center. These tables will have CRM (CARDIAC RHYTHM MANAGEMENT) Profit Centers stored in them.
In the transfer rules for 0CO_OM_CCA_1, add ABAP code in the start routine to block CRM (CARDIAC RHYTHM MANAGEMENT) data. The code will have the following logic:
Check Cost center master data table u2018/BI0/QCOSTCENTERu2019
This table u2018/BI0/QCOSTCENTERu2019 being time dependent, use the last day of the fiscal period from transactional data as the date to select from u2018/BI0/QCOSTCENTERu2019.
Go to the Profit center reference table and identify if the data belongs to BSC Boston Scientific/CRM (CARDIAC RHYTHM MANAGEMENT).
Block CRM (CARDIAC RHYTHM MANAGEMENT) data.
Best Regards,
Satya
Edited by: satya prasad on Sep 8, 2009 8:16 AM

You could give this a try:
DATA: wa_qcostcenter TYPE /bi0/qcostcenter,
 wa_ppcxref TYPE /bic/ppcxref, "Custom Profit Center Cross-Reference table
 l_tabix TYPE sy-tabix,
 l_last_date TYPE d.
LOOP AT data_package.
l_tabix = sy-tabix.
CALL FUNCTION
 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
 i_gjahr = data_package-fiscper+0(4)
 i_periv = data_package-fiscvarnt
 i_poper = data_package-fiscper+4(3)
IMPORTING
 e_date = l_last_date.
SELECT SINGLE
FROM
 /bi0/qcostcenter
INTO
 wa_qcostcenter
WHERE
 costcenter = data_package-kostl
 AND dateto <= l_last_date
 AND datefrom >= l_last_date.
IF sy-subrc EQ 0.
 SELECT
 FROM
 /bic/ppcxref
 INTO
 wa_ppcxref
 WHERE
 profit_ctr = wa_qcostcenter-profit_ctr.
 IF sy-subrc EQ 0.
 IF wa_ppcxref-data = 'CRM'.
 DELETE
 data_package
 INDEX
 l_tabix.
 ENDIF.
 ENDIF.
ENDLOOP.
Edited by: Dennis Scoville on Sep 8, 2009 4:32 PM

Can't find Business Object for Functional Location BOM in BAPI

Hi all,
I've to make Upload Program through BAPI for Functional Location BOM,for making that Upload i can't find BUSINESS OBJECT for FUNCTIONAL LOCATION ,Equipment BOM and Fleet Object (Vehicle).Kindly tell what Business Object should i used to create that Upload Programme.I shall be very thankful to you.
Regards,
ABAPFK

Hi
you have to do all steps in LSMW
1.Maintain Object Attributes
2.Maintain Source Structures
3 Maintain Source Fields
4 Maintain Structure Relations
5 Maintain Field Mapping and Conversion Rules
7 Specify Files
8 Assign Files
9 Read Data
10 Convert Data
11 Create Batch Input Session
Please maintain source fields required.thats important.(maintain 2 level-header and item,also provide common name of column to link to 2 files
Header file:sample
RECORDNAME     EQUNR     Plant
10001031                        10001031      3000
Item file:sample
RECORDNAME     ITEM NO     MATNR     Item catg   QTY
10001031                             10      P-1001          L               1
Regards
Seenu

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to refer field of DataSource in transfer rule for DSO object in BI 7.0

hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.

hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav

Error while installing transfer rules for 0PM_C03 from Business content

Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...

Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy

Updating and deleting Partner functions for functional location

Hi ,
I am having a requirement of updating and deleting partner function for functional location .
If anyone can suggest some BAPI or function module for same .
Thanks n Regards
Manik

Hi Fritz,
Thank you for your response,
My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
LET ME DESCRIBE IT.
WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
AND
I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU GOTO ->PARTNERS
WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
what are steps required? Do we require a custom service module?
Regards,
Robert.

Tables for Functional location/equipment in Sales Area

Hi ,This is sivakumar ...
h2.
I wanna know Tables for Functional Location/equipment in Sales area under the Customer Service erena.

I know the sales order number, header and item ..
I need other parameters to use this table....

No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Function module like ENQUEUE and DEQUEUE for function location.

Hi All,
I should be highly appreciate if any one help me for locking function module like ENQUEUE and DEQUEUE
for function location.
Thanks
Shaw

Hi,
You can either use the standard way of locking by using :
data:lv_varkey          TYPE rstable-varkey.
concatenate functional_location sy-mandt into lv_varkey .
*   Lock table
    CALL FUNCTION 'ENQUEUE_E_TABLEE'
      EXPORTING
        mode_rstable   = 'E'
        tabname        = 'IFLOS'
        varkey         = lv_varkey
      EXCEPTIONS
        foreign_lock   = 1
        system_failure = 2
        OTHERS         = 3.
*     Unlock table
      CALL FUNCTION 'DEQUEUE_E_TABLEE'
        EXPORTING
          mode_rstable = 'E'
          tabname      = 'IFLOS'
          varkey       = lv_varkey.
Or,
As mentioned above create a lock object via transaction SE11.
Go to transaction se11:
--> Enter lock object name e.g EZ_IFLOS
--> Click on create
--> Enter description
--> Click on tables tab
--> Enter 'IFLOS' as table name
--> select lock mode
--. click on save and activate.
2 function modules will be created as DEQUEUE_EZ_IFLOS and ENQUEUE_EZ_IFLOS .
Regards.

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

LSMW for functional location address fields

HI Folks,
I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.

Hi Praveen,
You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
Regards,
Bala

Outbound IDOCs for Functional Location

Hi experts
We are planning to use IDOCs for interfacing SAP and Legacy system using XI.
THis will be an outbound interface as we will be updating the legacy system with SAP.Therefore I am looking for a standard outbound IDOC for functional location.
So far I have not found one. Can you advise the outbound IDOC for Functional location ?
Another question I have , I have found some IDOC's but they are not released , Is there a way to release the IDOC's, what needs to be done for this.
Many Thanks
Regards
Gaurav

Hi Vinod,
This is the case for the 2 outbound Idocs from ECC to SNC for which settings have been maintained to send them immediately:
1. PORDCR1
2. STPOD
I have asked my PI team to check the PI port / PI cache. Will keep the thread updated if theres any resolution.
Regards,
Bharath

Addition of sub-screen for Functional Location / Equipment / Notification

Hi All,
Can any one help me on Addition of sub-screen based on config in new tab or sub-screen for objects for Functional Location / Equipment / Notification / Notification Item / Work OrderWork Order Operation.
If you are designed the above requirement by using ABAP objects please send sample code for the same.
I am not bothering about addtional fields which you created in your program.
Thanks a lot.
-Kalluri

Thenna,
QMIH-ILOAN -> ILOA-ILOAN
ILOA-TPLNR -> IFLOT-TPLNR
PeteA
[www.pjas.com]

Transfer rules for Functional Location hierarchy

Similar Messages

Maybe you are looking for