Transporting FI configuration

Hi All
When we are transporting configuration into a new client, there will not be any GL accounts or cost elemnts or cost centers in the new client. But we will be transporting automatic account determinations which has GL account numbers cost centers or cost elements example: config in obyc and okb9. Does those transports fail?.
Thanks in advance

Hi
you can transport but you need of creating the G/L in other cloecnt after transporting your request.
Kesh

Similar Messages

Error checking transport group configuration in System BQS

Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
Rahul

Hello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black

The TMS configuration is inconsistent and The transport route configuration

Hi,
I logged on domain controller in STMS in QA. I can see the following in STMS as
" The TMS configuration is inconsistent
The transport route configuration is inconsistent"
Users were able to do transports and there were no issues.
Transport routes
DEV>QA>PRD
TST(which is not active)
Environment:
Oracle: 10.2.0.4.0
Windows NT
Netweaver 70 ehp1 abap
Please guide me how to resolve the above issue.
Thanks and Regards
Satya

Hi,
Everything is tick marked.
Please find the output.
Check Transport Directory                                 03/30/2011 08:34:16
       QA1 CAL - Quality
           Transport Directory
               bin
sap2bksrv\sapmnt\trans\bin
               Create Test File
               Read Test File
               Delete Test File
          buffer
sap2bksrv\sapmnt\trans\buffer
                Create Test File
                Read Test File
                Delete Test File
          cofiles
sap2bksrv\sapmnt\trans\cofiles
               Create Test File
               Read Test File
               Delete Test File
         data
sap2bksrv\sapmnt\trans\data
              Create Test File
              Read Test File
              Delete Test File
         log
sap2bksrv\sapmnt\trans\log
             Create Test File
             Read Test File
             Delete Test File
         sapnames
sap2bksrv\sapmnt\trans\sapnames
             Create Test File
             Read Test File
             Delete Test File
         tmp
sap2bksrv\sapmnt\trans\tmp
             Create Test File
             Read Test File
             Delete Test File
Thanks and Regards
Satya

Transport System - Configure to automatically import Dev transports to QA

Hi,
Does anyone know the steps involved in automating the Tranport System to automatically import transports to QA once released in Dev?
Many thanks,
Marie

Hi,
Check out this thread
Transport Routes - configuring automatic import into multiple clients
Kind regards
Umesh K

Transport/Copy Configurable Products alone with Configuration from one Clie

Hi All,
I need to transport/copy Configurable Products alone with Configuration from one Client to another. Any body who can guide me how to do it.
Thanks,

Hi All,
Problem Solved ... Closing the Post...
Thanks and Regards,
The following steps were carried out inorder to solve the problem:
1) Create the Products in target system with the same name as in Host.
2) Create the RFC Connetion "HTTP Connection to ABAP System".
3) Create a Site of Type "External Interface for XML"
4) Assign RFC Destination to the Site Attributes
5) Create Subsciption and publication for "Product Configuration MESG".
6) Assing site and BDOC Type to the Interface Type in IMG
7) Define Request object
8) Start it request by entereing the Request Name, Source Site and Target Site.

Transportation Management configuration

Hi
everybody
can you help me regarding Transportation Management configuration steps ineed to configur to my client

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf

Transport the configuration in Infopackage

Dear experts,
I have a question regarding as the configuration in the Infopackage. I would like to define the Maximum size of a data packet for certains infopackages. But it seems that these configurations would not be transported from dev to test.
Is that true or is there a problem in my transport order?
Thanks in advance!

Yes the data packet size settings of the infopackage do not get transported. you will have to do this settings in each of the systems.
Regards

Stock transport order - configuration

I want to use stock transport order. Can anybody suggests what are the steps of configuration ?

Hi
Follow the below steps to to make STO between two plants ( different company codes).It is also called as Inter Company STO.....
1)Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure,In Customer Master,sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group,Shipping Condition and Supplying plant combination,Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receing Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
2)Follow the below steps to to make STO between two plants belongs to same company codes).It is also called as Intera- Company STO.....
1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Mar 11, 2008 5:57 AM

Question about transport system configure

I have two system dev & prd, the prd is domain controller, the router is from dev to prd.
I want to delete all transport configure and reconfigure it.   Now I login to prd 000, and delete dev from transport system, and use se06 to initial the stms, then I go to stms, the configure has been initialized.
But when I login dev000, the two systems configuration and the transport router is still exist in stms and I can not use se06 to inital it.   I am sure that in prd 000, the configuration has been deleted succussfully.
the configuration is still exists in dev000, and I can not do any operation from dev000 which is not domain controller, and the real control prd000 has been delete by me.
I try to use se06 , but after reinstall cts, I can still see the configuration in stms.
Could you give some solutions , Is there any problem with my operation?
thanks a lot.
Edited by: victor on Jan 11, 2009 9:17 AM
Edited by: victor on Jan 11, 2009 11:07 AM

Hello Victor,
you said PRD is the domain controller and successfully you
deleted previous configuration in PRD ,now login into DEV and
in the same delete the cofiguration in DEV too.when everything
is cleared you start from the first and start adding DEV to the
domain PRD.hope this helps.
regards,
Manjula.

Role of old released transport after configuring charm

I want to configure charm 7.1 in solution manager 7.1 SP10 .how can i include released(old ) transports after charm configuration? please share your ideas about this.Thanks in advance

Hi
Only hostname/ipaddress and SID name will be changed for solution manager. So for solution manager back RFC in ECC and EP systems you need to change hostname/ipaddress and instance number.
From SMSY try to update/read ECC and EP systems data. Check it is working fine or not.
Suman

How to Transport KMC Configuration

Hi Experts,
What is the procedure for transporting Knowledge Management & Collaboration configuration across the landscape? (Dev>Qua>Prod)
Regards,
Shobhit

Hi,
Refer this weblogs which will give you to get clear idea to transport the KM Content and Configurations.
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/251732004">KM Transports</a>
Regards,
Venkatesh. K
/* Points are Welcome */

Four system transport domain configuration

Hi,
Currently we have three system landscape DEV>QA>Prod
Now we are introducing one more environment (Training) .That means when you release the request from QA then it has to be populate to Production and Training environment.
Now my question is how to configure STMS for 4 system landscape?
Please suggest if you have done this scenario.
- Kristene

Hi Bernard,
I thought of moving it to another forum (NW Admin), but then I discovered it was there already... (cross-posted)... together with 154 other "unresolved" questions
The question of the transport domain, group, controller, etc design (in general) does have security related aspects, so I will leave it open.
Cheers,
Julius
@ Kristene, please follow up on your questions... and close them if answered...

Transport OBN Configuration in Portal

Dear All,
I want to know about how to transport the OBN (Business Object) configuration from one portal to another portal. Is there any specific steps need to be followed like Portal content transport. I searched in SAP Help but i didn't get any idea. I am working in EP7.0 EHP1.
Please share your idea.
Thanks & Regards
Prakash T

Hi Prakash,
I would suggest you to use portal export functionality
System administration >> Transport >> Transport Package >> Export >> Portal Content >> right click and "New Transport Package"
Inside this transport package you should ensure you are exporting the Business Object, OBN source(iview that is triggering the OBN navigation) and OBN targets(from each OBN operation you are able to check the targets).
In order to ensure you are selecting the correct business object you can do the following:
Go to Content Administration >> Portal content >> Search tab
put here the information in following format:
<system_alias>.<business_object_name> (it is Case sensitive)
Then select "business object" as object type and press "search"
From the results you can right click in the result and "Locate in portal catalog"
Then you can add this object to your transport package.
After importing this content you should be able to use the OBN successfully there.
Thanks and Regards,
Sowmya K

Transporting GRC Configuration from Dev to Quality

Hi,
I am in the process of wrapping up configuration in Dev for the GRC applications. I would like some information on how to transport configuration of Workflows (initiators, stages, etc..), Mitigation controls, Rules/Risks in CC, FF configuration.
Also has anubody configured a User Exit for FireFighter IDs so as to now allow them to login directly into the backend.
Thanks in advance.

AE and CC both have methods of moving content from one system to another.
In AE have a look at Configuration -> Initial System Data. The Export Data option will allow you to move Roles and Workflow conifg etc. It will create a compressed filed that you will then insert into the destination instance.
In CC you can download your rule set and upload it into the destination system. Go to Rule Architect -> Utilities -> Export Rules. A text file will be created that you can then import into the destination instance.
In FF the only configuration that I know you can transport is the defintion of the Reason Codes. All other "config" data will have to be redefined in the destination system/client.
Lastly, I have implemented the User Exit correction a couple of times now. It works as designed. Once applied to your system, when a firefighter ID is used to log directly onto SAP a message box will appear stating that direct logons with firefighter IDs are not allowed.
Hope this helps

Transport domain configuration error

Hi,
We have made a homogeneous system copy of our R/3 production system to create a test system.
The copy has the same SID as the source system and is installed as a local system rather than a domain - this is a Windows environment. The source system is the domain controller for the transport domain.
I have run SE06 in the copied system and am now trying to reconfigure STMS to set it up as a single system in it's own domain.
However, when I go into t/action STMS I am prompted to join the production domain - which I didn't expect, so I select Other configuration and enter appropriate values there but am getting error:-
Local TMS configuration is inconsistent in N3P
Message number XT 123
Can anybody advise how to resolve this?
Regards
Richard

1. Did you follow changing SID name and post database copy steps at database level first?
2. If you have done above, I hope you have deleted existing Transport configuration from SE06. If you haven't pls do.
3. Then, At transport domain controller, please remove this system ( if this system existed earlier)
4. Now, try joining domain.
It should work!
K

Transporting FI configuration

Similar Messages

Maybe you are looking for