Travel Management basic queries

Hi all,
we're into implementing Travel Management. We're using Workflow & Webdynpro ABAP for the same.
I've some basic queries :
1. In workflow mail, which is sent to approver, can we write the mail in different languages ( i found language button on task). If yes, how can we determine the language at runtime.
2. If a mail for approval(with portal link to approve/reject ) is sent to the manger & before his/her approval, if traveller modifies the travel request & submits again, which sends another mail to the manager. In such case, what would the manager see while clicking on link of earlier mail.
3. how can we send mails to different approvers. Here,the case with me is the approvers are selected dynamically & No. of approvers are also selected dynamically (at run tiem).
Any help in above queries would be helpful.
Thanks in advance.
Regards,
Siddhesh sanghvi

hi
dynamic selection of approver is not possible you have to clearly define the approving authorities in the workflow assign agent.
if your system is uni-code activated then you can use any other languages like japanese, chinese, etc.,
it will open and show the old travel request details.

Similar Messages

  • WebDynpro ABAP u2013 Travel Management Floor Plan Manager Queries

    Hi,
    Travel Management in WebDynpro for ABAP uses FPM (floor plan manager).
    General Data View in FITE_VC_GENERAL_DATA component is being shared by Travel Creation component and travel expense as well.
    Can you please help to ans below queries?
    1 >>
    I want to know where exactly these configurations are done like
    When Create Travel Request button/link is clicked after general data, Review Component will be called and when Create Travel Expense button/link is called after general data it will go to a different component view.
    2 >>
    Also how visibility of button that comes from FITV_FPM layout view is configured in other component like in FITE_VC_GENERAL_DATA component and in FITE_VC_REVIEW component.
    3 >>  How would I include my own Z Component in existing FPM.
    4 >> when cancel button is clicked to terminate current application in travel management applications it takes us to starting point. Where configurations are done to direct it to other application/link?
    Regards,
    Madhvika

    No Ans

  • Travel Management Queries

    I am in the middle of implementation of Travel Management  and I have need few clarification. I request you please provide your input on the below issue.
    1)     Is it possible to attach scanned copies of receipt as an attachment to each expense type.
    2)     As per the requirement employeeu2019s supervisor as maintained in Org Management should approve the Travel Expense. Is this possible, If possible what is the workflow we should use and what changes should we make to workflow.
    3)     If the client want the approval to be done in 3rd party tool, can that be done.
    REgards,
    Koutilya A.K

    Hi,
    1. It is possible to attach scanned receipts to each expenses. But you need to activate the DMS for the travel expenses.
    2. Travel expense can be approved by line manager based on the Rule 168. Ask your workflow guy use the rule to get the immediate supervisor.
    Hope this helps.
    Regards,
    S.Srikanth

  • Workflow basic queries

    Hi all,
    I've some basic queries for workflow:
    1. In workflow mail, which is sent to approver, can we write the mail in different languages ( i found language button on task). If yes, how can we determine the language at runtime.
    2. If a mail for approval(with portal link to approve/reject ) is sent to the manger & before his/her approval, if requester modifies the travel request & submits again, which sends another mail to the manager. In such case, what would the manager see while clicking on link of earlier mail.
    3. how can we send mails to different approvers. Here,the case with me is the approvers are selected dynamically & No. of approvers are also selected dynamically (at run tiem).
    Any help in above queries would be helpful.
    Thanks in advance.
    Regards,
    Siddhesh sanghvi

    Please take the time to read the Rules of Engagement.  Please do not ask more than one question at a time.  Before asking a question, do search the forums to see if the answer already has been given or is available in the documentation or help.
    If you still can't find it, please feel free to post the questions again, individually, with more informative subject lines.
    Thank-you for your cooperation and understanding.
    Matt

  • Travel Management Tables

    Hello,
    I am trying to find the table that holds the travel management information for Enhanced Cost Assignment for Expense Reciepts.
    I have found table: PTRV_SREC for receipt data &  PTRV_SADD holds the additional receipt data.  Also, PTRV_SCOS which holds Cost assignment - the only problem is this table summarises receipts by the cost assignment. 
    Is there a table that holds the actual receipt line items with the cost object assignment? 
    The requirement I have is to report receipt lines by WBS with the text for each line.  This seems basic reporting but is not available as far as I can see.
    Thanks in advance.

    Hello,
    You can use the report RPR_TRIP_COST_ASSIGNMENT_DATA or you can create your own query in SQ01 by using the LDB PTRVP as your Infoset base query.
    Regards,
    Raynard

  • FI Part in Travel management  --- Plz help me out!!!!!!

    Hi Peers
    Help me out!!!!! 
    basically i have doubts on how it the entries happen in FI. Will there be any entry when the Credit Card Company submits the Bills? there will be an entry for payment to credit card company ryt! so wat wld be that entry? will entry made while receiveing the invoice n the entry made during payment be cleared. like they do in GR/IR case.
    My next doubt is, we receivce the invoice from credit card company n the payment is made, will this not reflect while preparing the expense reoprt per personnel no./ Travel Request. how will that look like when the expense eport is sent to accounting dept n they make a posting.
    I'm basically very much confused abt this, if you can help me out then i owe you so much as i'm in a very difficult situation.
    If you can sedn me step by step journal entries like, what happens and the entries when the credit card company send the bills, what happen and the entries when the payment is made to the credit card company, what happens and the entries when the expense report is submitted. If you ahve any docs related to this, it wld be of great help to me. IF you can send me ur phone no, i wld also call you. Plz help me out yaar.
    If you have the list of entries related to Travel Management, plz send me as it wld be of great help to me. Expecting your reply ASAP

    Expenses to the compnay are accrued teh moment the credit card compnay raises the Invoice on the company. Irrespective of whether you deduct any thing from employee or not, compnay need to pay to the card company.
    After the receipt of card statement.
    Employee a/c Dr
       Credit card company Cr.
    Now employee submits his claim. This can be after or before the credit card statement.
    Expenses a/c Dr
       Employee a/c with the approved amount.
    When you pay credit card company
    Credit card compnay account dr
      Bank
       Employee
    When you recover the balance amount from the employee on excess spending,
    Bank a/c dr if paid in cash
    To Employee account
    or Salaries Payable a/c Dr (If recivered from Salary)
       Employee a/c
    Hope you understood
    Reward points if useful.
    sarma

  • Travel management - problem with post a trip for an employee in India

    Hi,
    I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
    1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
    2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
    3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
    4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
    " Customization for 1600 j_1iindcus missing in table
    Message no. 8I303" and when I have googled on that error message I found that I should go to:
    IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
    but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
    5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
    Please help. I have no idea how to come around this.
    Best regards Lisa

    Hi again,
    In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
    I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
    Regards Lisa

  • Configuration Solution Manager - Travel Management for Route Cause Analisys

    Hi,
    Can you describe how to configure Solution Manager to monitor (RCA-E2E) our Travel System (SAP Enterprise Portal + SAP HR)?
    Best regards,
    Diego.

    Hi,
    RCA configuration remain same for all the module/component
    All the steps are there in RCA Configuration thread
    SPRO>SAP SOlutionManager Implementation Guide> SAP Solution Manager>Basic settings> Root Cause analysis
    here you can find all the information regarding setup, please follow one after the other.
    Regards,
    Shyam.

  • Travel management information system

    I everybody,
    I’ve got a problem when I use transaction : "S_AHR_61016407 - Find Documents Using Maximum Rate" in the Travel Management Information System (or any other transaction dealing with maximum rate).
    Our customizing seems OK :
    We have defined exceeding rates and if the expense exceeds the maximum rate, we have defined that a warning message must be shown (code “C”).
    When I enter a travel expense (PR05) with an exceeding rate, I can see this message.
    But when I try to see which travel expenses exceed the maximum rate, nothing is selected (I select “C” in the “Limit exceed” zone).
    I tried a Quickviewer on table PTRV_SREC and the field “ABOVE_LIMIT” is empty.
    I have found no OSS notes about this problem.
    Do you know something about it ?
    Many thanks.

    NITHIYASEELAN ,
    QMIS is basically deals with kind/types/ of data updation that takes place in the system
    Pls go through these links for detailed understanding
    http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fd5872a94711d1890a0000e8322f70/frameset.htm
    Reward points if useful
    Regards,
    SVP

  • Travel Management configuration

    Dear Friends,
    I am new to travel Management. i want to do configure travel management. Please help me on this.
    Please send some thread related to travel con fig it would be very great help for me.
    Thanks in advance for your help.
    MVR

    Dear MVR,
    Please follow the link below... This will lead you to the best practice documentation for travel management.... 
    http://help.sap.com/bp_bl604/BBLibrary/HTML/191_EN_IN.htm
    This will give you a basic understanding on travel management config...
    Regards,
    Raj

  • Ess customizing travel managment

    Hi Experts,
    I am working on webdynpro java development . I got new requirement on ESS CUSTOMIZING TRAVEL MANAGEMENT  i don't have good experience on ESS CUSTOMIZING. So guide me with the document step by step with screen shots any ESS or MSS application so that i cant understand how to customize the application.
    Waiting for Reply
    Thanks & Regards.
    kittu.

    Hi Kittu,
    There are various kinds of customization for ESS/MSS business pkgs.
    1.Screen level customization - Where you can hide, remove, add UI elements using this kind of customization.
    2. Code level customization - Used basically for application level logic change.
    3. SPRO Config customization - This is based on the business requirements and type of fuctionality to be enabled for end users.
    There are lots of documents available on SDN for the same. Please let me know if you are looking for any specific scenario.
    Thanks.
    Sushil S Aher

  • Travel Management Q&A

    Hello everyone,
    Thanks a lot for sharing the basic FI- Travel Management documents with me. My next question is regarding the interview questions n answers. Pls send me any web links you have where you have all the Quests and also their answers. Pls help me with the following quests--
    what is the process of recording a trip in travel management.
    How are financial enteries transfered to FI ?
    Integration between FI to Travel Managgement and HR
    Thanx in advance

    Hi T.G
    Can u plz send me the basic FI- Travel management docs. It wld be of great use to me. my id is rajaramj1 at yahoo.com  expecting your reply ASAP.
    Regards
    Rajaram

  • Travel Management-Receipt Maximum rates and Default values

    Hi
    I need some help on one of the issue we are facing in Travel Management. We are expected to Go-live very soon.
    We are unable to apply a very basic check of receipt maximum amount at
    the receipt entry in the portal for travel expenses. This functionality
    is very much provided by SAP in the backend configuration but it is not working in the backend also in our Development system.
    This is concerning the maximum and default amounts in
    View V_T706B2 are related to the IMG
    "Define Influence of Control Parameters: Receipt Maximum Rate"
    I have analysed the table entries but could not
    get the desired solution.
    In the meanwhile based on SAP note: 808437-Warning message when max
    rate is exceeded negative value, we looked into the code and found that
    the code for checking the maximumum amounts is "commented" in the
    lastest SP32 SAP HR version in the DEVELOPMENT system we are working
    on.
    I also looked into (SAP Note: 1114398---Country and Region when
    reading maximum amounts and defaults) and have found that the
    correction suggested in this note may already be applied as our D35
    System EA_HR patch level is already SAPK-60211INEAHR and Note
    correction in SAPK-60203INEAHR is of old level, hence we have not applied this correction.
    Furthermore I have checked and found that in our IDES system these checks
    for Maximum amounts and defaults are working fine. The IDES system is
    at level 0002 and highest support package is SAPKE60002.
    Many thanks in advance !
    Ritesh

    Hi Ritesh:
    We had a situation in which our expense types require both a warning message and request for additional information when the maximum is exceeded. We were told that ECC6.0 can handle only one action per expense type/amount. In our old system, R4.6C, it could handle multiple actions per amount for a receipt type.
    I am not sure if this is your issue - having multiple actions for a expense type/amount combination.
    We got around this by leaving one action at the expected amount and setting the other to 0.01 lower.
    Lisa

  • Error message in SAP Travel Management

    Hi alll,
    I am trying to change an address in PRMD tx code
    Error message:  Enter a house number
    Also it is not possible to change existing addresses as the same error comes up.
    I also tried in other company codes and there it seem to work fine so the issue might only be for company code 0376
    Could you please let me know if there is any restrictions from the field u201Cstreet and house numberu201D so that it can be entered and changed as free form text?
    Thanks for your help!
    It is SAP 6.0

    Are you sure you mean PRMD?  This is the T-code to update HR master data and is not related to travel management!
    Did you mean PRAA perhaps if you were trying to update master data from HR to vendor as there are some known issues around the structure of the PRAA report and house number and address (see the notes 570023 and 663350)
    cheers
    Sally

  • FM Travel Management Integration Deactivating

    Hi All,
    How to deactive the integration of Travel Managment with Funds Management module, since we are controlling the expenses from HR module.
    After activating funds management in the system, while creating a travel request we got the following error. Anyone can help on this, for idenifying the problem.
    In the travel request portal we are getting this error :
    " com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: No expense type for estimated costs has been defined. Cannot save , error key: RFC_ERROR_SYSTEM_FAILURE and No expense type for estimated costs has been defined. Cannot save , error key: RFC_ERROR_SYSTEM_FAILURE "
    Thanks
    RK

    Hi,
    Check your patch level n upgarde it.
    Please implement the note correction of the note 1286257. This should solve the issue you describe.
    Thanks
    Neha

Maybe you are looking for