Trex cannot start TREXAdmin.sh (display error)

Hello we have trex version 7.10.55.00   on linux x64 installed .
To get to the admin screen with    TREXAdmin.sh   I first start up attatchmate Reflextion x (version 14.05)
Then do en export of my ip address
      export DISPLAY=01.02.345.678:0
Then run the TREXAdmin.sh   command and the admin screen works ok
I just installed a new version of trex   on linux X64    7.10.61.00 and when I try to access
TREXAdmin.sh       I get the following :
Starting TREXAdmin on display 10.50.123.456:0, please wait.
Traceback (most recent
call last):
File "<string>", line 1, in ?
File
"/sapmnt/D19/exe/nuc/linuxx86_64/TREX_7.10.61.395713/python_support/TREXAdmin.py",
line 2690, in main
    root = Tk.Tk()
File
"/usr/sap/D19/TRX05/exe/Python/lib/python2.4/lib-tk/Tkinter.py", line
1569, in __init__
    self.tk = _tkinter.create(screenName,
baseName, className, interactive, wantobjects, useTk, sync, use)
_tkinter.TclError:
couldn't connect to display "10.50.123.456:0"
I have found 1 pc (vista with same version of reflection x) where it works ok and a windows server that also works.
I did some compares of the reflection x settings but have not found any difference. any ideas?

Hello,
Please check on which port the xmanager is listening, for example from your log it shows as "10.50.123.456:0" make sure your xmanager tool also shows '0' as the port.
Thanks,
Regards,
Yoganand.V

Similar Messages

Batch management requirement cannot be changed; choose "Display errors

i am getting this error in material master when i am removing tick from batch managment
regard
nabil

Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
Diagnosis
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance.
Procedure
If this message appears in data transfer or in mass maintenance, and you want to know why the field cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the field as required, and then choose Display errors:
Industry
Proceed
Retail
Proceed

I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

"User names cannot start with a number" error while adding a user

Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
user id ?
I got an error "User names cannot start with a number" while trying to add users
with all numeric user ids. I am using "portalAppTools" web app provided with WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen ? Thanks
Shah

The problem is that when we have user groups starting with a number, then the search
feature doesn't work for user groups (case # 466837 with BEA).
So, which brings me to the following question:
a. Should the search feature work?
b. What is the limitation? I mean, it is designed not to allow user groups starting
with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
will it have any impacts on Portal?
As an aside, it seems somewhat strange that the Portals can start with a number!
Thanks in advance
Venkatesh
"Ture Hoefner" <replyto@newsgroup> wrote:
Hello Shah,
Search your tools web app for the UsermgmtTools.properties file. In
my
installation, it is at:
D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
It starts with this:
# Messages and other properties used by usermgmt jsp tools
# Name properties - UserBean and GroupBean
disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
disallowFirstCharDigit: true
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Shah Sidi" <[email protected]> wrote in message
news:3db0a001$[email protected]..
Is it possible to use WL Portal 7.0 admin framework to manage userswith
all numeric
user id ?
I got an error "User names cannot start with a number" while tryingto add
users
with all numeric user ids. I am using "portalAppTools" web app providedwith WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen?
Thanks
Shah

Can't get my desktop PC Win7 MS Ofc 2010 calendar, contacts, tasks onto iCloud. Get error message: Setup cannot start because of unexpected error". Laptop Win8

I have a desktop PC Win7 with MS Ofc 2010. I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched. I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload.
Error Message: Setup cannot be started because of an unexpected error. Should I delete iCloud and reload and try again? What are suggestions from the community? Sent report to iCloud.

Hi Clifford,
Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Symptoms
After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
Resolution
You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
“Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
Click Cancel to close the message.
Click "Sign out" on the iCloud Control Panel.
Reenter your Apple ID and password, then click Sign in.
“Your setup couldn't be started because the iCloud server stopped responding.”
or “Your setup couldn't be started because the iCloud server couldn't be reached.”
Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
-Jason

T400, cannot start Catalyst Control Center - error "active GPU not supported"

on a t400 machine running vista business 64 bit.
last week all was hunky dory. this week, when i try to open my ati catalyst control center (CCC), i receive the following error:
"ATI catalyst control center cannot be started because the currently active gpu is not supported"
i've read some posts about this problem stemming from not using the ATI graphics card and rather being on the integrated graphics card. the posts indicated i could reenable CCC simply by clicking on the battery icon in the system tray and selecting "high performance mode" to force the machine to use the discrete graphics card. after i do this, and then try to start CCC, i receive the same error as above. also, at this point after the switch to high peformance mode, my device manager lists "mobile intel(r) 4 series express chipset family" as my display adapter still. if i left or right click on the battery icon in the tray, i do not see any options for switching cards explicitly.
the video driver for the mobile intel 4 adapter is listed as being from ATI at version 8.520.4.4000.
i am not sure of my driver version for the ATI card. nor do i know where to look for it.
to my knowledge, nothing aside from a number of "critical" windows updates have changed on my system between the time CCC was working last week and now.
any suggestions as to how to fix this? and what caused it to stop working?
thanks in advance for any help.
Solved!
Go to Solution.

i finally figured it out. and no new drivers or reinstalls were necessary. in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining). from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance. if from there i select high performance, i can then open CCC.
the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine). once you have that on, you can explicitly switch the graphics cards.
the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week. so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually. weird.
slip, thanks for you help. i appreciate it. and that is an interesting note about freeing up more memory by disabling the switchable graphics. i will probably give this a shot and see how i like. more available memory never hurts!
thanks again to everybody that helped out.

Camileo S20 - recorded file cannot start due to format error

Hi!
I have a problem here. My camileo S20 format is .avi but when i try to put the film on a stick or dvd and play it on my dvd-player it won't start (format error) , i changed the dvd-player and the same problem , i tried to make it .mpg , still no use.
What can i do ? Please help .

If i connect the cam to the tv it work's but if i burn a dvd with the cam videos the dvd-player won't read them .
@masterG : i tried to convert them into mpg , no use . What should i do ? On the dvd every movie i played worked , except this ones.

Sound card problem - This device cannot start. (Code

hi all,
here's my situation...
i had a dell dimension 4400 that came with a sound blaster li've! value(wdm) sound card. i recently got a new motherboard/case etc. i transferred the sound card to my new system and i get a "This device cannot start. (Code 0)" error when i check device manager. for some reason, the game port on the sound card is working fine, but the audio processor part has the error. windows recognizes the card, but it won't use it. the card is a little over 3 years old.
now, i've read the forums, tried a clean install, registry tweaks, changed bios settings, even did a hd format. i also tried different pci slots. i have sp2 and all my other drivers are updated.
the new motherboard i have is a gigabyte 8ipe000g. i already contacted gigabyte, did not get much help. it has onboard ac97 audio. i disabled the onboard audio, but it did not seem to change anything. i have also tried windows drivers, the dell drivers from the cd, and the drivers from the creative website. none of them changed anything. i am now having trouble removing the drivers from add/remove programs. i keep removing them, but they still remain, even after using the wdm driver remover from the cd (a file named ctapxx.exe, or something similar). it's almost like windows is not actually installing the drivers when i install them. i'm wondering if the code 0 error is specifically driver related.
the first time i disabled the onboard audio and updated the drivers a weird thing happened. every time i started the computer up it would crash when it got to the desktop. it no longer does this for some reason, everything now starts up, but i have no audio. the sound card is the only device giving me problems on my system.
is there anything else i need plugged into the sound card? all i have is the sound card plugged into the pci slot, and an audio cord going from the card to my dvd dri've. is there anything that is supposed to go from the card directly to the motherboard? as far as i can tell, i have everything hooked up correctly. i don't understand why the game port works, but not the audio processor.
so, i have basically tried everything. seems like quite a few people get code 0 errors with some sort of hardware they have, but it usually seems like there is no definite solution.
does anyone have a similar problem, or a solution? hopefully i don't have to get a new sound card. i would just stick with my onboard audio, but i hear it can cause problems with games.

Since you have a new board it maybe a bios setting.
Is there IRQ conflict from the soundcard.
Maybe remove the card and unistall the software, use a tool "driver cleaner pro" to remove all creative files.
Check your mainboard manual on what pci slot that dont share, i hear slot 3 is the one to use, i use slot 5.
Fit the card and reinstall.
Best of luck.

Cannot start add-on

Hi everyone,
I would like to install my add-on on a separate client pc. There was an error upon connecting my SAP Business One application to a server, with my add-on installed and connected. The error was "cannot start add-on" and the status of the add-on in the client is failed. How can we fix this error?
Thanks,
Omann

Check this links
Addon don't start
Cannot start an add-on
Error:AddOn [AddOn Name] can not start addon

"Cannot start Microsoft Outlook. Cannot open the Outlook window. The information store could not be opened." [Office 2013/Office 365]

So here is the error in Outook 2013
"Cannot start Microsoft Outlook. Cannot open the Outlook window.
The information store could not be opened."
Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
HELP?
1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
2) Have blown away all profiles and created new ones.
3) Have blown away all Outook data files and starting from scratch
4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
config......Office etc.
6) I have spent hours reading online fixes/technet forums etc..............to no avail.
Please give more suggestions.
Thanks
Phil H Charlotte, NC

Hi,
Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
mode for" is clear.
This method has resolved the issue for some users in this thread below:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Batch management "Display errors" Message no. M3530

Hi Experts,
we want to activate batch management in material master data for more than 1000 items.
1. Which most of the items having stock without batch in current period and in previous period and few items stock are 0.
2. Few of items have the PR, open PO and it included BOM
I am trying to activate the batch management which the material stock are 0, the system allowing for few items to change and most of items system showing below error.
Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
please suggest, what are procedure need to follow to activate the batch management in material master.
Thanks & Regards,
Sivanandan

Hi,
refer below treads -
Batch management requirement cannot be changed; choose "Display errors
Activate batch in material master data
Batch management is not activating in material master

Product extension oracle.odi could not be loaded. The product cannot start.

Hi everybody!
i hava a problem in running odi on IBM AIX, when i write ./odi.sh. the odi can not start ,
"Product extension oracle.odi could not be loaded. The product cannot start." This is error message, why?
by the way IBM AIX's version is 5.3, ODI'S version is ofm_odi_generic_11.1.1.3.0_disk1_1of1 ,It is correct?
Pleass help me to solve it!

user10795526 wrote:
hi,
Can you tell us how to solve this iusse??Wait for Oracle to certify the software on the platform in question. You can run the ODI Server components but will have to run Studio on a supported platform.

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

"cannot open display" error meaning

I'm trying to get dwm running for a while now, and when I try to run it, it says "cannot open display". Then I thought, ok, maybe i have to install an X server, so I got Xorg, installed it, removed dwm and then recompiled it, but I got the same error. Then I thought that maybe I didn't have the right configurations (even though I never bothered config.h or config.mk), so I got gnome (hoping that it would auto-configure itself) so that I can test if it's something with dwm or some other problem with the system. When I tried to start gnome, I got the "cannot open display" error, again (my keyboard will never forgive me for what I did when I saw that).
I went through dwm's wiki more than once, googled the problem, read about Xorg, I just don't know what I'm doing wrong.
Everything was done on a fresh netinstall.
Could you please help me out with this? (Or just link me to somewhere I can find some meaningful information about the problem)
Last edited by imv (2012-04-01 15:02:00)

@lifeafter2am I read that, xorg_server and xorg_apps were already installed, since I installed xorg (as in, the whole xorg package). xinit, startx ~/.xinitrc and /etc/X11/xinit/xinitrc , all files/programs mentioned in the wiki, ar missing, though, perhaps it's a hint of some sort
@istbrad212 the video card driver was already installed
Sorry for the slow responses, I have to constantly reboot in order to try everything.

Trex cannot start TREXAdmin.sh (display error)

Similar Messages

Maybe you are looking for