TRM - Tax and Revenue Manag.: Define forms in Public Sector Tax Assessment

Hi Gurus,
I try to define my forms via transaction SM34 - VC_FMCA_TRM_SCENARIO. If I create a new Scenario for application T - Tax and Revenue Management (TRM). After that I create a Version, which is valid from 20110101 to 99991231. Next step is Form Views. Here should be Views: A - as field, B - as ammended, C - as calculated, etc. But no values are in table TFMCA_PHASE. And there should be standard values A, B, C, D and E. If I try to put there value A, error message occured: Entry A   does not exist in TFMCA_PHASE (check entry).
We have EHP4 system.
any ideas?
thanks a lot
Miroslav

Hi,
there is needed to add following values in transaction SM30 - V_TFMCA_VIEWS:
A - As filed
B - As amended
C - As calculated
D - As corrected
E - As audited
You can activate a change document here also.
regards
Miroslav

Similar Messages

  • Difference between SAP PSCD and tax and Revenue management

    Hi All,
    I am new to SAP industry solutions for public sector and am actually trying to understand the new systems. Can anyone please tell me the difference between SAP PSCD and SAP Tax and Revenue management ? Please revert.
    Thanks in advance,
    Shakuntala

    Hi Shakuntala,
    PSCD is an industry add-on on top of SAP ERP FI-CA (Contract Accounting), which is part of SAP ERP Core.
    Tax & Revenue Management is a Public Sector industry solution, which utilizes PSCD to enable some of its key processes (e.g. account management and collection management). However, TRM as a business solution also make use of other modules and systems (e.g. CRM).
    The initial development of PSCD was strongly driven by Tax&Revenue Management, therefore people usually have hard time to differentiate between the two terms. But now PSCD is also used by and enhanced for other SAP Public Sector solutions like Grantor Management or Social Services.
    Best regards,
    Xiaoi
    Edited by: Xiaopeng Tan on May 22, 2009 5:27 PM

  • SAP Tax and Revenue Management

    Hello experts,
    I was wondering if you can point me in the right direction in order to find documentation, information about the SAP Tax and Revenue Management Industry solution. Especially technical information such as: Reporting, Data Migration, etc...
    Any information will be appreciate it.
    Thanks in advance.

    Dear Carlos,
    Tax and Revenue Management is within PSCD.
    I think these links are helpful:
    <a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/42/f93818c24a1bc7e10000000a11466f/frameset.htm">TRM & Public Services</a>
    <a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/2f/4f55408f611059e10000000a155106/frameset.htm">PSCD</a>
    Regards,
    Mar

  • BRFplus in Tax and Revenue Management

    Hi Experts,
    As BRFplus comes as a replacement of BRF, I would like to know on the configuration side of BRF in ECC 6.0 that involved Tax returns. How does BRFplus replace BRF in terms of Forms Processing, for Example creation of Form Bundle Type, assigning BRF event to Revenue Type??
    Thank you in advance.
    Rgds,
    TM

    Hi Tush,
    In TRM EhP5 one of the new features we offer, among many others, is to use BRF+ as your rule engine and the Form Bundle Type concept to process form based taxes. The configuration for using BRF+ is done within a Form Bundle Type which is independent from the revenue types.  As the name suggests, it is simply a u2018formu2019 process. (even not definitely with u2018taxu2019 scope, e.g. subsidy, pension and etc.).
    Another key feature that is only available in form bundle framework is the introduction of Activities and Variants, which allows you combine rules together for different use cases under one form bundle through IMG customizing.
    Now Revenue type is an interim concept that shall not be the center point of our customizing any more. It is only necessarily used for object-based billing. Otherwise it plays an auxiliary role to the form bundle types.
    Whenever you get access to a EhP5 system I would recommend you to start reviewing the SAP Test Catalog (T-code SFW5) under Business Function PSCD_TRM_AND_WITHHOLDING. There is a whole section for BRF+ and Form bundle Type configuration.
    We are planning to teach the WNA520 Public Sector Tax and Revenue class within the next two months. If you get a chance you might want to take the class and learn everything about what is coming in TRM for EhP5.
    Finally, I would like to mention that the TRM team has a new space in the SAP community network (sdn.sap.com) where we will start sharing more and more information about our solution. You might want to take a look to what we have today and come back in the near future for more new information.
    This is the URL to access this space directly:
    http://wiki.sdn.sap.com/wiki/display/PS/TaxandRevenue+Management
    Best Regards,
    Diego.

  • Activate the TRM (Task and Resource Management)

    Could you tell me where to activate the TRM (Task and Resource Management) in WM?

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • TRM (Task and resource management) extractor

    Hi people!!
    I would like to know, if is there some
    TRM extractor for sap bw, or what could be
    the procces to load TRM information in BW.
    Regards!

    Hi Stefanie,
    First, you create the TRM site in:
    SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
    You can assign your TRM site to you warehouse number here:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
    And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
    SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
    Then, you continue with the rest of TRM customizing work.
    Hope this will be helpful for you.

  • Posting taxes and revenue account seperately in invoice

    Dear Team,
    As per our client requirement, they want to post taxes immediately at the time of invoice creation. However, they want the revenue recognition after some time/days of invoice creation. This is requirement of revenue recognition for aerospace industries.
    Could you please suggest any possible configuration/development.
    Thanks and regards,
    Suhas

    it applies to only few materials on a sales order as items
        and with only 1 specific item category
    This should have been posted in sales forum.
    Better go with a new pricing procedure with new sales / billing document types based on which, the requirement can be met. Hope, you know the basic SD configurations like assigning pricing procedure to document type etc., based on which, system will trigger the required pricing procedure when you create a sale order.
    thanks
    G. Lakshmipathi

  • Oracle Communications Billing and Revenue Management documentation

    Can any one tell me where I can find Oracle BRM documentation.

    Pl see this link - Oracle BRM 7.3.1 for Solaris
    HTH
    Srini

  • Opening a Crystal Report in B1 8.8 in a User Defined Form representing UDO

    Hi Experts,
    Is it possible to open a Crystal Report from a User Defined Form representing my UDO?
    I had developed a 'Vendor Quotation' UDO and its  User Defined Form
    I wanted to show the report while clicking the Preview menu in SAP B1 8.8 toolbar.
    I have created the Crystal report and used the record selection as {@OVQT.DocEntry} = {DocKey@}
    Please help
    Also, is it possible to add Print layout and assign a default Print layout to this User Defined Form?
    Thanks in advance
    Regards
    Arun

    Hi,
    I also face the same problem. I make a master type using UDO. But i want to print it.
    In my opinion ( i haven't tried this way ). If we make a UDO ( master or document type ) , we will find the docentry and object field in our UDT. Both of these will connect between SAP form and Crystal report. In crystal report we select the tmsp_doclinetypelayout. It is a store procedure which will connect between SAP form and CR. Before that try to modify this SP by adding the udo object.
    Fyi, if i'm not mistake dockey is connected to docentry SAP form.
    Thanks
    regards
    bodhi86

  • Problem - Define Forms for Check Deposit List - Need Help

    Hello Experts,
    I want to extend the logic of T Code FP20 (Prog RFKKCK01),
    Hence, I have created a 'Z' prog with the appropriate extension in the logic.
    Now to take these change effectively, i have made corrensponding changes in the attached SAP Script (FKK_CHECKDEPOS) also.
    Now, when I go to
    Contract Accounts Receivable and Payable -> Business Transactions -> Payments -> Processing Incoming and Outgoing Payments ->Define Forms for Check Deposit List.
    In this, I create a new Entry after removing the existing Entry of the same Company Code [1000     | ZRFKKCK01 | SapScript | ZFKK_CHECKDEPOS ]
    it gives me an Error "Specify the key within the work area".
    Specify the key within the work area
    Message no. SV033
    Diagnosis
    You have attempted to create an entry whose key is not in the range defined for this area.
    System Response
    The entry cannot be created.
    Procedure
    Please check your entry.
    Please Help me solving this problem.
    Thanks!!

    Thanks sbaranga. This code won't work for me.
    <select>
    <option value="P"if (statusIndicator.equals("Pending")){    selected}>
    <option value="A"if (statusIndicator.equals("Approved")){    selected}>
    </select>
    In above code statusIndicator is ID I believe. I need to show selected item based on statusIndicator in database. Also it has to pass updated status to database incase if user changes status thru form.
    If they select Pending then "P" will be passed to servlet and if they select Approved then it will pass "A" to servlet.
    I will be receiving "A" or "P" from database when I am trying to retrive status value from database. Based on value "A" or "P" I need to change selected information on form.
    Update and Retive form are same. this one form does everything display and update.
    I hope this help to understand my question.
    If you have any question then email me at [email protected]
    Thank you.

  • LE-TRM: automatic and immediate TASK creation at TO creation

    Hi guys,
    Up to know, I succeed in creating TASK either manually in the TRM monitor or by running the report RLTRQSCHEDULER.
    I'd like to know how to get the following behavior in SAP LE-TRM (Task and Resource Management) module : automatic and immediate task creation in TRM at TO (transfer order) creation in LE.
    Does anyone know how to set this up?
    Thx a lot in advance for your valuable inputs.

    Activate this BADI and set up Request Scheduler program as a background Job.
    method IF_EX_LTRM_RQST_GLOBL_SCAN~RQST_GLOBL_SCAN.
      TYPE-POOLS: TRMGC.
      DATA: lt_where_tab   TYPE ltrqt_it_where,
            lv_where_line  TYPE ltrqt_where.
      data: lv_pick(3).
      clear: lv_where_line.
    lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway, trmgc_rqact_replen, trmgc_rqact_move)'.
    append lv_where_line to et_where_tab.
    lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway,'.
      append lv_where_line to et_where_tab.
       clear: lv_where_line.
    lv_where_line = 'trmgc_rqact_replen, trmgc_rqact_move)'.
      append lv_where_line to et_where_tab.
    endmethod.

  • Error while opening supplier/customer forms and payment manager templates

    we are having 11.1.0.7 database and 12.1.1 E-business suite with 10.1.2.3 forms
    user is getting
    Error Page
    You have encountered an unexpected error. Please contact the System Administrator for assistance.
    while accessing supplier/customer forms and payment manager templates and this gets resolved after bouncing the application. the current instance is a staging one and this will be replicated to production so please help or suggest any solution or work around
    thanks
    pankaj

    There should be a link on the error page for further details about the error. Can you post the contents of that error link page ?
    Pl also check the Apache logs for any errors - see MOS Doc 419839.1 (How to enable Apache, OC4J and OPMN logging in Oracle Applications R12) for name and location of the Apache log files.
    HTH
    Srini

  • How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

    How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

    Hi,
    We do not support this feature right now.  Someone else has posted this to our ideas forum, here - http://forums.adobe.com/ideas/1587.  I suggest you vote for it, because we look at the popular ideas to help guide us on what new features work on.
    Thanks,
    Todd

  • Net tax base and gross tax base is not defined in FB70

    Dear SAP Gurus,
    I am booking the customer invoice directly through FB70. While booking the same I am using the tax code A0 (Zero Output Tax) Tax Code column as the account is mandatory for Ta Code. But when I post the transaction system gives the following error.
    Net tax base and gross tax base is not defined
    Message no. F5341
    Diagnosis
    For the company code, it was specified that the net value (amount minus cash discount) is the tax basis and the gross value (amount including taxes) is the cash discount base. This constellation is not supported by the system.
    Procedure
    Correct the configuration for the company code in question.
    I also check the FXTP confiq the A0 tax code is assign company code & also define & assign in zero tax code.
    Please give the solution ASAP.
    Regards,
    Sandeep

    Hi,
    Check OBY6 as suggested by Kalyan or use Tcode - OB69.
    Regards,
    Shridhar

  • Issue while installing Oracle Revenue Management and Billing for Financial

    I'm trying to install RMB and getting the below error. I have installed MicroFocus Server 5.1 with the WrapPack 3 but still getting the Winsock error. Please advise.
    - 2012-01-17 16:29:59,278 [main] ERROR (host.sockets.WindowsPipeSocket) Cannot instantiate com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket because of problem loading a library com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket during static initialization.
    java.lang.UnsatisfiedLinkError: no com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket in java.library.path
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1738)
         at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         at java.lang.System.loadLibrary(System.java:1028)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.<clinit>(WindowsPipeSocket.java:25)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy.clearServerPortResources(WindowsPipeSocketStrategy.java:51)
         at com.splwg.base.support.cobol.host.SocketStrategy.bindServerPort(SocketStrategy.java:144)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterSkel.<init>(OptimizedRemoteExecuterSkel.java:43)
         at com.splwg.base.support.cobol.host.OptimizedInvocationStrategy.startOnParentJvm(OptimizedInvocationStrategy.java:25)
         at com.splwg.base.support.cobol.host.RemoteJVMFactoryImpl.<init>(RemoteJVMFactoryImpl.java:64)
         at com.splwg.base.support.cobol.host.CobolHostStartup.startup(CobolHostStartup.java:41)
         at com.splwg.base.support.context.ApplicationContext.initializeCobolRuntime(ApplicationContext.java:231)
         at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:212)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:115)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:91)
         at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:512)
         at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:181)
         at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4334)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
         at org.apache.catalina.core.StandardService.start(StandardService.java:516)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
    - 2012-01-17 16:29:59,278 [main] FATAL (support.context.ApplicationContext) Error initializing ApplicationContext
    - 2012-01-17 16:29:59,278 [main] INFO (web.startup.SPLWebStartup) Shutting Down the JMX Connectors...
    - 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) JMX Connectors shutdown successfully
    - 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) Shutting Down the Application Context...
    - 2012-01-17 16:29:59,294 [main] ERROR (web.startup.SPLWebStartup) Exception shutting down SPL Application Context
    Edited by: 906696 on Jan 17, 2012 3:13 AM

    Hi Jeff,
    Appreciate your suggestion. My intention was also to post it in the right forum but i could not find any forum for Oracle Revenue Management and Billing, since its a new product.
    Its for such new products that we need help and support. Let me know if you are aware of any such forum. That would be great help indeed.

Maybe you are looking for