Trouble Installing license on IDSM-2

Hi,
I got my license for an IDSM-2 that I am installing (used serial number of IDSM to get it). When I go to install it, whether via the CLI or through the web interface I am informed that the license in no good...
Here's the message from the CLI:
Error: setLicenseKey : The license key on the system is invalid.
Here's the output from the "show version" command:
pcsd-suth-ids# sho ver
Application Partition:
Cisco Intrusion Prevention System, Version 5.0(2)S152.0
OS Version 2.4.26-IDS-smp-bigphys
Platform: WS-SVC-IDSM2-BUN
No license present
Sensor up-time is 7 min.
Using 236765184 out of 1983660032 bytes of available memory (11% usage)
system is using 17.3M out of 29.0M bytes of available disk space (59% usage)
application-data is using 28.7M out of 166.8M bytes of available disk space (18
usage)
boot is using 40.5M out of 68.6M bytes of available disk space (62% usage)
application-log is using 530.5M out of 2.8G bytes of available disk space (20%
sage)
MainApp 2005_Mar_04_14.23 (Release) 2005-03-04T14:35:11-0600 Run
ing
AnalysisEngine 2005_Mar_29_16.33 (Release) 2005-03-29T16:45:11-0600 Run
ing
CLI 2005_Mar_04_14.23 (Release) 2005-03-04T14:35:11-0600
Upgrade History:
IDS-K9-sp-5.0-1.2- 14:00:00 UTC Thu Mar 17 2005
Maintenance Partition Version 2.1(2)
Recovery Partition Version 1.1 - 5.0(2)
Any ideas as to where to start? is there any chance that the license file could be no good? I double-checked that it was not modified after receiving it in e-mail...
Thanks,
Tim

This URL should help you:
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00804cf52f.html

Similar Messages

  • Having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we did

    having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

    Hey robr72339266,
    With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
    But, you cannot use Acrobat on both the machines simultaneously.
    You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
    Please Contact | Adobe to seek help on the same.
    Regards,
    Anubha

  • Terminal server does not have any installed licenses

    Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
    “The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
    Product version: Windows Server 2008 or Windows Server 2008 R2
    Licensing mode: Per User
    License type: RDS CALs”
    So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

    Hi,
    Thank you for posting in Windows Server Forum.
    From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server.  If the license server has installed licenses of the other mode, changing the licensing mode
    for the terminal server may also resolve the issue. 
    To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command. 
    To change the licensing mode on RDSH/RDVH:
    $obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
    $obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
    Please refer below article for information.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
    If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
    Please check computability matrix.
    RDS and TS CAL Interoperability Matrix
    http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • For Users Having Trouble Installing...

    If you are having trouble installing and have access to either another Mac or can Boot your old OS, try installing Pacifist from http://www.charlessoft.com/
    Then pop your Leopard disc into it and open the disc using the third button on the main menu
    It will scan the disc when it shows you a list of packages hit the "Verify" button at the top of the window. Then go do something for another 30-45 mins. When you get back it will show a detailed list of files missing, or that don't exist.
    I am missing 124,891 files according to the report and 20,000 of my files have different checksums. I know that my disc is DOA and I recommend that if you are having that problem as well, to schedule and Appointment and get your disc exchanged.
    Hope this helps.

    do you have a volume license?  or a single user license?

  • I am having trouble Installing Acrobat XI Pro...

    I am having trouble Installing Acrobat XI Pro... I'm receiving an error that says I need Adobe Application Manager to verify my license.  Each time I try to install Adobe Application Manager 8.0, I receive an error that says the installer failed to initialize.  I am then directied to download Adobe Support Advisor, which, according to your website, doesn't exist any more.  I am now stuck.  Please help.

    Sorry... should have put the particulars of the box down:
    Win 7 Ultimate x64, SP1 on a Mac Pro.

  • Trouble installing Safari 4.0.5 on OS 10.5.8

    Trouble installing Safari 4.0.5 on OS 10.5.8
    I downloaded an MP3 file and iTunes sad to upgrade QuickTime, which I did. Then it said to upgrade Safari to 4.0.3. I found my current OS would allow me to install 4.0.5, which I downloaded. When I tried to install Safari 4.0.5 (after agreeing to licensing)  I keep getting told I cannot install Safari 4.0.5 because I need OS 10.4.11.  This is on the Destination Selection section of installing.  But I already run 10.5.8.  Any suggestion to fix this? Thanks in advance.

    Reset Safari.
    Launch Safari
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the box next to  " Remove saved names and passwords".
    Click "Reset".
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions
    For more on this:
    http://support.apple.com/kb/ts3408

  • I am having trouble installing Flash Player 13/register error.

    I am having trouble installing Flash Player 13; after everything downloads, I get the error message, "The ActiveX control for Flash Player could not be registered"; "Error:  Failed to resiter.  I have Windows XP and Internet Explorer 8.  Please help; what can I do to get this installed properly?

    Use the MSI installer: http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_ 13_active_x.msi

  • Trouble installing the apps after downloading Adobe Creative Cloud

    I am having trouble installing the apps after downloading Adobe Creative Cloud. The following Error messages show up:
    ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
    ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\KATHER~1.CDA\AppData\Local\Temp\{63EDD438-B4D0-424C-B05A-7990C09D955C}\Illustra tor_1

    Third party payload installer vcredist_x64.exe failed with exit code: 2147942750

  • I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

    I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
    this is what I get
    -- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • Trouble installing 2.1.1 for ipod touch generation 1

    I am having troubles installing 2.1.1 ipod touch software on a gen. 1 ipod touch. I am using an IMac G5, itunes 8, OS 10.5.4 and the process of updating in itunes has frozen with the blue candy stripe bar spinning as it says "preparing iPod software for restore."
    The ipod is black with an white apple and a spinning wheel.
    It's been about 5 hours.
    What should I do?
    Cheers.

    Just found some info on apple support.
    Updating your iPhone and iPod touch to iPhone software 2.0 or later for the first time
    Software updates prior to iPhone software 2.0 updated the device without affecting your settings or media content. Updating your iPhone and iPod touch from iPhone software 1.x to 2.0 or later includes a back up, erase, and then restore of your device prior to installing the new update. iTunes will offer to create a one-time media backup of your device depending on what content is on your device and what content is stored in the iTunes Library you are connected to. You should ensure that you have enough free space on your Mac or PC to accommodate a backup that matches the capacity of your iPhone or iPod touch (4 GB, 8 GB, 16 GB, or 32 GB) if you proceed with the this backup.
    As a result of this comprehensive one-time media backup, this process can take some time. The amount of time, is determined by the amount of data on the iPhone or iPod touch.
    7 hours and counting. Stay tune. Maybe by tomorrow morning!

  • Hello i am having trouble installing itunes 10.5 on my laptop i have windows vista. it says error 7 windows error 998. i now have no itunes. i have tried to uninstall itunes but it still wont work and keep coming up with that message. please help!

    hello
    i am having major trouble installing itunes. i had itunes working fine and i went to update it as it told me there was an update which i thought i did. i went on my laptop the next day and it said "itunes was not installed correctly error 7 windows error 998"
    i read a few articles on here but i am having no joy. i uninstalled itunes and reinstalled and that did not work. i also unistalled some other apple things cant remember the names sorry!
    i am not a whiz on a computer so really need some help please!!

    Installing, and uninstalling, applications never touches or removes the data.
    Clean out and uninstall all the apple programs and software thru Programs and manually.
    Might want to use Revo and CCleaner
    I always use manual standalone installers (and keep a couple backup versions)
    itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
    A search of these forums will show some threads.
    I'd clean up vista, you need SP2 or later, and specific error message?
    I wonder as you arenot the first with a dell if maybe the OS or included software.
    Security programs like Norton and older versions of Kaspersky have been implicated.
    Also settings in IE that affect pop-ups and plug-ins.

  • Trouble installing shared printer on windows 7 64 bit

    hey guys
    i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
    we have a HP Laserjet 3015 thats shared on windows xp profesional computer.  i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
    The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
    how can i get around this ??
    This question was solved.
    View Solution.

    rory2g wrote:
    i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
    we have a HP Laserjet 3015 thats shared on windows xp profesional computer.  i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
    The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
    Try the following:  On the Windows 7 computer go to the Devices and Printers folder, Add a Printer, Local Printer, Create a new port, Local port, Next, \\xpcomputername\lj3015 (where you put in the actual share name of the computer and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5,  Next, Next.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • Trouble Installing Windows 8.1 on Yosemite

    I am having trouble installing Windows 8.1 using the Bootcamp utility on OS X Yosemite. I downloaded the ISO file for 64 bit 8.1 from Microsoft and put it onto an 8gb USB drive using Bootcamp. My Macbook Pro is an early 2011 (MacBookPro8,2) and is currently running OS X 10.10.1. I know that my MBP doesn't usually support booting from a USB, so I modified the info.plist file using the steps outlined in this thread:
    Enable Bootcamp to install from usb for OSX 10.9**WORKS**
    This got it to give me the option to boot from the USB when I held the option key on startup.
    I have tried the following methods for installing with different errors for each:
    1. Installing using Bootcamp created partition
    For this, I went through the normal steps in bootcamp and when I got to the disk partitioning stage, I tried to format the drive 0 partition 4 using the format button. After formatting, it wouldn't allow me to continue because of this error: "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks." This lead me to this thread: Windows can't be installed on Drive 0 Partition 4.. It mentions a difference between EFI v. preUEFI installations, but I don't know how to do a preUEFI installation. Enlighten me anyone?
    2. Creating a "free space" partition with Disk Utility
    For this, I created a free space partition in disk utility and used the Window's installer to format the partition. This allows me to get to the very end of installation, but I get the error message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
    BTW, FileVault is turned off.
    Any help would be much appreciated!

    Hi mgallego,
    Which step did the error start to occur ?Have you tried to install it again to have a check ?As the information stated, we can restart the machine to have a check.
    Here is a link for reference of the requirements of the Windows 8.1 .
    System requirements
    http://windows.microsoft.com/en-HK/windows-8/system-requirements
    There may be a hardware issue here, it is also recommended to look for help from the manufacturer for help.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

    I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

Maybe you are looking for