DISPLAY INTERFERENCE PowerbookG4 (2005)

Hello -
About 18 months ago my PBG4 had a fairly hefty crash whilst linked to an external hard drive. This took the internal and the external drives down. The internal HD was replaced - by an authorised mac chap and a cloned system was put onto the machine. When i turned it on i got this chaotic interference, which doesn't look unlike the wind filter in photoshop. My mac chap checked again for any pinched wires and obvious loose connections, but found no problems. Screenshots and the mirror mode using an external monitor show no problems. This leads us to assume it was a lid problem. However, at the beginning of the week of 8th feb i needed to use it so hooked it up to an external monitor. After about 2 hours, the problem seemed to go away. It was then off for 24 hours and restarted on the wednesday - without the external monitor and was working fine. It was then used all thursday and friday. Not even a flicker! Great i thought it was fixed, and we all assumed it must have been dust that had burnt off(!)when the machine had been opened. It has now been off for 10 days and i've just turned it back on and the same problem has reoccurred.
OK, problem-solvers! This is the first time i've used a forum (of any type) and what i would like is:
a) can anyone tell me what the problem is?
b) why would it go away and then come back?
c) is it just a case of warming up???
d) its a good machine with a new hard drive - what would you do with it!?
I did replace it with an imac - which is lovely, but i am slightly heartbroken that i thought old faithful was healed!
I wait with baited breath and a modicum of hope that someone can solve my problem, or at least explain it!
Thanks for reading all of my message, i hope it is as clear as possible...
because...
estherneedshelp.
Message was edited by: estherneedshelp

Hello BGreg
Thanks for your reply. I think the mac chap did this and nothing showed up, but i'll check. My original cd is now redundant as a newer system (leopard)was put on it and i don't have that disc. But here's an update for you. I've had it on for 4 hours and after 2.5 hours it solved itself again - just like last week. The display has completely stabilised.
This is peculiar because, does that mean it needs 2 hours warm up everytime i go to use it? However, I just unplugged the machine to move it and it's battery usage had dropped to 98% and the screen went again. Could it be a battery issue - that if the machine is not at 100% it won't function properly?
thanks so much for your help - let me know what you think now. best wishes esther
Message was edited by: estherneedshelp

Similar Messages

  • Dual Display on Early 2005 Powermac G5 - Second DVI Port bad?

    Hi
    I've just bought a second display for my Powermac and can't get it to work. Monitors OSD says no DVI signal and i get a blank screen on second display. Main display is still fine.
    System Profiler recognises that second monitor is attached and SysPref/Displays thinks that there are two monitors attached.
    Monitor & cable definitley good as they work when I swap them round.
    Monitors are Sony SDM-S75D & S74. Graphics card is an ATI Radeon 9600.
    I've not used the second DVI port since I bought the Mac new a two years ago, so it may never have been good.
    I've tried:
    Known good tft display
    Known good dvi cable
    Reseat cables
    PMU reset
    NVRAM reset
    Open firmware reset-all
    Checked for updated drivers.
    Before I look at buying a new graphics card, is there anything I haven't tried yet?
    Cheers
    Gareth

    OK, this is odd.
    In desperation after finding out the price of a new graphics card;
    my sony tfts are dual input dvi and vga. so i dug out the dvi to vga connector that came with the mac. Now running the second monitor via dvi to vga converter and its ok. not as sharp an image as the dvi main monitor, but ok. will still have to buy a new graphics card sometime.
    So dvi to vga works on 2nd port, but not dvi to dvi!!

  • Mac Book Pro from mid 2009 compatability with Apple displays

    Is my Mac Book Pro from mid 2009 compatible with the Apple Cinema 23" Displays from circa 2005?

    Here is the link:
    http://store.apple.com/us/browse/home/shop_accessories/all_accessories/cables_do cks#!
    Make sure the pins are correct for it. There is DVI-D as well so you need to double check that you are purchasing the correct one.

  • Display of 0FISCPER in a Query

    Greetings all.
    I'm busy with an upgrade from 2.1 to 3.5
    I've finished doing the upgrade in our test environment and currently I'm testing my queries, loads etc. I've discover that my Time characteristics are not displaying the same anymore.  The problem occurs with the text variables of these characteristics and also when they are displayed as data.
    For example August 2005 use to display as Aug 2005 in version 2.1 but now in 3.5 it displays as AUG. I realize that the one is the medium text and the other the short text. However changing the InfoObject-BEx tab to use the Medium description doesn't seem to fix the problem. Also making changes to the query didn't help either.
    Any suggestions will be appreciated.
    Thanks,
    Meurant Naude
    Message was edited by: Meurant  Naude

    Hi,
    Welcome to SDN.
    Have you tried the "Transfer Global settings" option when you right click on the Source system in RSA1.
    Also check the texts in transaction OB29.
    Hope it helps.
    Cheers
    Anurag
    ......and don't forget to assign points its the way at SDN....

  • Migrating from 4.1 to 6.1, deploy issues

    Problem with deploying WAR File in Sun One Web Server 6.1
    Current Setup
    We currently run IPlanet 4.1, LDAP 4, JDK1.2.2. We have a web server running on a specific port. For this webserver we have config files obj.conf, etc, and our servlets are configured using rules.properties and servlets.properties.
    Extract from obj.conf:
    NameTrans fn="redirect" from="/public/prices" url="http://1.23.0.3:7194/other/public/Prices.html"
    NameTrans fn="pfx2dir" from="/images" dir="/opt/nettrade/stp2/images"
    NameTrans fn="pfx2dir" from="/other" dir="/opt/nettrade/stp2/other"
    NameTrans fn="home-page" path="/opt/nettrade/stp2/other/public/StaticHomepage.html"
    NameTrans fn="document-root" root="/opt/nettrade/stp2/html"Extract from servlets.properties:
    servlet.GenericPublicPage.classpath=/export/home/eileenq/netDev/front/jars/JHCnettradePages.jar
    servlet.GenericPublicPage.code=ie.davy.nettrade.presentation.servlets.GenericPublicPageServletExtract from rules.properties:
    /public/GenericPublicPage=GenericPublicPageAll servlets are located in a jar file, JHCnettadePages.jar
    Upgrade Setup
    We plan to upgrade our setup to LDAP 5.2, JDK1.4.2 and Sun One Webserver 6.1
    I have setup a webserver, https-Nettrade-public, and have restructured our servlets into a valid WAR file, Nettrade.war, which I can deploy.
    Extract from obj.conf:
    NameTrans fn="redirect" from="/public/prices" url=http://172.16.116.142:7010/other/public/Prices.html
    NameTrans fn="pfx2dir" from="/images" dir="/opt/nettrade/stp2/images"
    NameTrans fn="pfx2dir" from="/other" dir="/opt/nettrade/stp2/other"
    NameTrans fn="home-page" path="/opt/nettrade/stp2/other/public/StaticHomepage.html"
    NameTrans fn="document-root" root="/opt/nettrade/stp2/html"
    Extract from web.xml:
      <servlet>
      <servlet-name>startup</servlet-name>
      <servlet-class>ie.davy.nettrade.presentation.framework.DavysStartupServlet</servlet-class>
      <init-param>
        <param-name>switchfile</param-name>
        <param-value>/opt/nettrade/stp2/config/dbswitch.conf</param-value>
      </init-param>
      <init-param>
        <param-name>context</param-name>
        <param-value>CLRTRADE</param-value>
      </init-param>
      <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
      <servlet-name>GenericPublicPage</servlet-name>
      <servlet-class>ie.davy.nettrade.presentation.servlets.GenericPublicPageServlet</servlet-class>
    </servlet>
    <servlet-mapping>
      <servlet-name>GenericPublicPage</servlet-name>
      <url-pattern>/public/GenericPublicPage</url-pattern>
    </servlet-mapping>
    Appliation URI: /Nettrade
    Installation Directory: /usr/netscape/https-Nettrade-public/webapps/https-Nettrade-public
    When I deploy as above, the startup servlet in my web.xml file (in war file) runs correctly, and all redirections, etc in my obj.conf work:
    /public/prices" redirects to " http://172.16.116.142:7010/other/public/Prices.html"
    "/images" maps to "/opt/nettrade/stp2/images"
    �/other" maps to "/opt/nettrade/stp2/other"
    And the homepage setting is picked up successfully.
    However, the servlets do not work as expected. When I click on a link from the homepage to a servlet:
         http://172.16.116.142:7010/public/GenericPublicPage?page=careers
    I get a page not found error, and this in the error log:
    [31/Mar/2005:11:49:27] warning ( 5170): for host 1.12.0.227 trying to GET /public/GenericPublicPage, send-file reports: HTTP4142: can't find /opt/nettrade/stp2/html/public/GenericPublicPage (File not found)
    But if I include the /Nettrade URI specified at deployment time:
    http://172.16.116.142:7010/Nettrade/public/GenericPublicPage?page=careers
    the servlet runs.
    I then tried to deploy to �/� instead of �/Nettrade�:
    Appliation URI: /
    Installation Directory: /usr/netscape/https-Nettrade-public/webapps/https-Nettrade-public
    And when I restart my web server, the homepage cannot be displayed:
    [31/Mar/2005:11:55:03] warning ( 5188): for host 1.12.0.227 trying to GET /, send-error reports: HTTP4143: error opening /opt/nettrade/stp2/html/noindex.html (File not found)
    and it seems like the obj.conf is ignored. My �/images� mapping does not map to �/opt/nettrade/stp2/images� as referenced in my obj.conf file:
    [31/Mar/2005:11:55:49] warning ( 5188): for host 1.12.0.227 trying to GET /images/davy-logo.gif, send-file reports: HTTP4142: can't find /usr/netscape/https-Nettrade-public/webapps/https-Nettrade-public/images/davy-logo.gif (File not found)
    But my servlet works:
    http://172.16.116.142:7010/public/GenericPublicPage?page=careers
    [31/Mar/2005:11:56:32] info ( 5188): for host 1.12.0.227 trying to GET /public/GenericPublicPage
    But the images referenced in the html are not mapped correctly
    [31/Mar/2005:11:56:33] warning ( 5188): for host 1.12.0.227 trying to GET /images/section-trading-1.gif, send-file reports: HTTP4142: can't find /usr/netscape/https-Nettrade-public/webapps/https-Nettrade-public/images/section-trading-1.gif (File not found)
    anyone have any ideas for how to get servlets working in a war file and director mappings outside of a war file working too?
    Thanks

    elving,
    Thanks for your reply.
    I did what you said, and deployed again to the URI "/". This time all obj.conf mappings worked, but the servlets didnt.
    I then took out a document-root line from the obj.conf, and all is working now.
    This line must have been confusing things too.
    Thanks for your help.
    I am sure I will be back on to this forum in the near future.

  • Month_ending and Year_ending....

    Hi Guys; In a report i need to show the following 3 columns:
    If: date_column is between 3/01/2005 and 3/12/2008 then my
    1) 'week_ending: ' Column should display values;
    3/5/2005,
    3/12/2005
    .....upto
    3/15/2008
    2) 'Month_ending: ' Column should display values:
    5/2005,
    6/2005
    .....upto
    3/2008
    and
    3) 'Year_ending' column should display values:
    2005,
    2006,
    2007 and
    2008
    I think i can get
    1) by using SELECT TRUNC(date_column , 'W')+7
    but how to get the Month_ending column and Year_ending Column values.
    Please help.
    Thanks
    Message was edited by:
    user521009

    to_char( date_column, 'MM/YYYY')
    to_char( date_column, 'YYYY')
    null

  • Err: The private key material is not exportable outside of the HSM

    Hi,
    I am working on weblogic 8.1 with sp4, Using keytool generated certificates with HardwareSecurityModule (HSM) and enabled ssl in weblogic admin console.
    Now while starting the server following error is displayed
    <Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000327> <Starting WebLogic Admin Server "ncss" for domain "ncqa">
    <Oct 4, 2005 3:18:49 PM GMT+05:30> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias srinualias from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
    <Oct 4, 2005 3:18:51 PM GMT+05:30> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias srinualias from the nCipher.SWorldkeystore file E:\bea\user_projects\domains\ncqa\srinu.>
    com.ncipher.provider.nCSecurityException: The private key material is not exportable outside of the HSM
    at com.ncipher.provider.km.KMDSAKey.getParams(KMDSAKey.java:59)
    at com.certicom.tls.interfaceimpl.CertificateSupport.CheckIfKeyMatch(Unknown Source)
    at com.bea.sslplus.CerticomSSLContext.doKeysMatch(Unknown Source)
    at weblogic.security.utils.SSLContextWrapper.doKeysMatch(SSLContextWrapper.java:93)
    at weblogic.t3.srvr.SSLListenThread.checkIdentity(SSLListenThread.java:323)
    at weblogic.t3.srvr.SSLListenThread.initSSLContext(SSLListenThread.java:169)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:140)
    at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:126)
    at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1637)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:1009)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
    at weblogic.Server.main(Server.java:32)
    <Oct 4, 2005 3:18:52 PM GMT+05:30> <Warning> <Security> <BEA-090552> <The public and private key could not be checked for consistency.>
    <Oct 4, 2005 3:18:52 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
    <Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "ncss" for domain "ncqa" running in Development Mode>
    <Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port 7002, ip address *.*>
    <Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address *.*>
    Please let me know if any clues.
    thanks
    Ceenu

    This is just a warning to let you know that the server was not able to verify whether the private key matches your public key, because it could not get the key from HSM. This is normal. SSL should still work.
    Pavel.

  • Report on Linux

    I've just installed Oracle Oracle Developer Suite 10g (9.0.4) over RedHat and i'm doing this,
    1) i run the script,
    $ORACLE_HOME/j2ee/DevSuit/startinst.sh
    2) i created a report through the report builder wizard, when i use "run paper layout" the report looks ok but when i try to use "run web layout" i get this error,
    Tue Jul 19 18:58:04 EST 2005
    javax.servlet.jsp.JspException
    javax.servlet.jsp.JspException
         at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:439)
         at MODULE202805126.jspService(_MODULE202805126.java:50)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    and the trace file has this,
    [2005/7/19 7:30:23:265] Debug 50103 (InProcessServer:Init): Server Config and Trace objects available
    [2005/7/19 7:30:23:266] Debug 50103 (WebServerDriver:start): Server Trace Object available
    [2005/7/19 7:30:23:267] Info 56025 (RWServer:startServer): Reports Server is starting up
    [2005/7/19 7:30:23:314] Debug 50103 (OC4JWebServer:start): webserver_srcroot=/opt/app/oracle/OraHome_2/reports/docroot WEBSERVER_DOCROOT=/tmp/docroot
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): RW=/opt/app/oracle/OraHome_2/reports
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): SSH_AGENT_PID=4122
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): HOSTNAME=localhost.localdomain
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): TERM=xterm
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): SHELL=/bin/bash
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): HISTSIZE=1000
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): LD_PRELOAD=/usr/local/error_oracle/libcwait.so
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2
    [2005/7/19 7:30:23:665] Debug 50103 (Environment:getEnvironmentStrings): WINDOWID=35666755
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): QTDIR=/usr/lib/qt-3.3
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_NO_DUMMY_PRINTER=TRUE
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): USER=oracle
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): LD_LIBRARY_PATH=/opt/app/oracle/OraHome_2/jdk/jre/lib/i386/server:/opt/app/oracle/OraHome_2/jdk/jre/lib/i386/native_threads:/opt/app/oracle/OraHome_2/jdk/jre/lib/i386:/opt/app/oracle/OraHome_2/lib:
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): ORACLE_SID=orcl1
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): SSH_AUTH_SOCK=/tmp/ssh-zTptff4121/agent.4121
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): ORACLE_BASE=/opt/app/oracle
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): GNOME_KEYRING_SOCKET=/tmp/keyring-Dzz7aj/socket
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): KDEDIR=/usr
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-unix/4094
    [2005/7/19 7:30:23:666] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_PATH=/opt/app/oracle/OraHome_2/reports/templates:/opt/app/oracle/OraHome_2/reports/samples/demo:/opt/app/oracle/OraHome_2/reports/integ:/opt/app/oracle/OraHome_2/reports/printers
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): TK90_ICON=/opt/app/oracle/OraHome_2/reports/plugins/resource
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): PATH=/opt/app/oracle/OraHome_2/jdk/bin:/opt/app/oracle/OraHome_2/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): DESKTOP_SESSION=default
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): MAIL=/var/spool/mail/oracle
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): TNS_ADMIN=/opt/app/oracle/OraHome_2/network/admin
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_CLASSPATH=/opt/app/oracle/OraHome_2/reports/jlib/rwbuilder.jar:/opt/app/oracle/OraHome_2/reports/jlib/rwrun.jar:/opt/app/oracle/OraHome_2/jlib/zrclient.jar:/opt/app/oracle/OraHome_2/j2ee/home/oc4j.jar:/opt/app/oracle/OraHome_2/j2ee/home/lib/ojsp.jar
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): PWD=/opt/app/oracle/OraHome_2/bin
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): INPUTRC=/etc/inputrc
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): LANG=en_US
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): GDMSESSION=default
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    [2005/7/19 7:30:23:667] Debug 50103 (Environment:getEnvironmentStrings): SHLVL=2
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): HOME=/home/oracle
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): LD_ASSUME_KERNEL=2.4.1
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): GNOME_DESKTOP_SESSION_ID=Default
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): LOGNAME=oracle
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-7YL1vQQ8ct
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): LESSOPEN=|/usr/bin/lesspipe.sh %s
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): DISPLAY=:0.0
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): ORACLE_HOME=/opt/app/oracle/OraHome_2
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): G_BROKEN_FILENAMES=1
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_TMP=/tmp
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): XAUTHORITY=/home/oracle/.Xauthority
    [2005/7/19 7:30:23:668] Debug 50103 (Environment:getEnvironmentStrings): COLORTERM=gnome-terminal
    [2005/7/19 7:30:23:669] Debug 50103 (Environment:getEnvironmentStrings): PLSQL_COMPILER_FLAGS=INTERPRETED,DEBUG
    [2005/7/19 7:30:23:669] Debug 50103 (Environment:getEnvironmentStrings): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
    [2005/7/19 7:30:23:669] Debug 50103 (Environment:getEnvironmentStrings): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
    [2005/7/19 7:30:23:669] Debug 50103 (Environment:getEnvironmentStrings): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    [2005/7/19 7:30:25:236] Debug 50103 (RWReport:getCurrentReport): Inprocess Server Trace Object available
    [2005/7/19 7:30:25:246] Debug 50103 (Report:(Proxy, Trace):1): Got an engine
    [2005/7/19 7:30:25:248] Debug 50103 (Report:(Proxy, Trace):2): Report created:147752400
    [2005/7/19 7:30:25:254] Debug 50103 (XMLPDS): setHelpSetID: 1
    [2005/7/19 7:30:25:255] Debug 50103 (XMLPDS): needSignOnParameter: True.
    [2005/7/19 7:30:25:258] Debug 50103 (JDBCPDS): setHelpSetID: 2
    [2005/7/19 7:30:25:258] Debug 50103 (JDBCPDS): needSignOnParameter: TRUE.
    [2005/7/19 7:30:25:260] Debug 50103 (textpds): TextDataSourceFactory: setReportContext
    [2005/7/19 7:30:25:260] Debug 50103 (textpds): setHelpSetID: null
    [2005/7/19 7:30:25:260] Debug 50103 (textpds): needSignOnParameter: true
    [2005/7/19 7:30:26:153] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
    [2005/7/19 7:30:26:211] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
    [2005/7/19 7:30:26:212] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /opt/app/oracle/OraHome_2/bin/rwengine.sh -server -cp /opt/app/oracle/OraHome_2/j2ee/home/lib/ojsp.jar:/opt/app/oracle/OraHome_2/reports/jlib/rwrun.jar:/opt/app/oracle/OraHome_2/jlib/zrclient.jar -Xbootclasspath/p:/opt/app/oracle/OraHome_2/vbroker4/lib/vbjboot.jar -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=rep_localhost-rwbuilder ORACLE_HOME=/opt/app/oracle/OraHome_2 engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/opt/app/oracle/OraHome_2/reports/logs/rep_localhost-rwbuilder/rwEng-0.trc tracemode=trace_replace cacheDir=/opt/app/oracle/OraHome_2/reports/cache
    [2005/7/19 7:30:26:218] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
    [2005/7/19 7:30:26:218] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
    [2005/7/19 7:30:26:236] Debug 50103 (RWEngine:init): args[0]=ORACLE_HOME=/opt/app/oracle/OraHome_2
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[1]=frombuilder=yes
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[2]=name=rwEng-0
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[3]=server=rep_localhost-rwbuilder
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[4]=cachedir=/opt/app/oracle/OraHome_2/reports/cache
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[5]=traceopts=trace_all
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[6]=tracefile=
    [2005/7/19 7:30:26:237] Debug 50103 (RWEngine:init): args[7]=tracemode=trace_replace
    [2005/7/19 7:30:26:356] Info 55007 (EngineImpl:loadLibrary): Load librw90.so succeeded
    [2005/7/19 7:31:26:240] Exception 50125 (java.lang.NullPointerException
         at oracle.reports.server.EngineManager.manage(EngineManager.java:256)
         at oracle.reports.server.IdleThread.run(IdleThread.java:87)
    ): Internal error java.lang.NullPointerException
    [2005/7/19 7:31:26:243] Info 50002 (RWServer:shutdown): Server is shutting down
    [2005/7/19 7:31:26:244] Info 50103 (RWServer:startServer): Notify thread to exit
    [2005/7/19 7:31:26:244] Info 50103 (RWServer:startServer): RWServer thread exits
    [2005/7/19 7:31:26:249] Exception 50125 (): Caught exception: java.lang.NullPointerException
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=50125,
    java.lang.String errorString="Caught exception: java.lang.NullPointerException",
    java.lang.String moduleName="REP"
         at oracle.reports.utility.Utility.newRWException(Utility.java:604)
         at oracle.reports.utility.Utility.newRWException(Utility.java:614)
         at oracle.reports.server.IdleThread.run(IdleThread.java:171)
    any idea guys ????

    Hi,
    It seems there is problem with sun.awt.image.codec.JPEGImageEncoderImpl
    on Linux environment. With same JVM and JDK version(1.4.2_04) barcode bean works on windows XP.But on Linux it is giving ClassCastException.
    It seems it is related to the Bug-4502892 reported on sun's website.

  • IPod 5th Gen (Late 2006) 30Gb "USER GUIDE"?

    On the Apple website the User Guides they have listed are: IPod w/Color Display-6/10/2005; IPod Click Wheel-9/2004; and IPod Original-10/21/2002.
    The most recent one being the one for color, shows an image of a black IPod with a RED wheel, which mine is not. I do not even know if mine has a color display. I do not know how to work it at all! Which is why I need the correct "User Guide".
    Which one should I choose?  Thank you!

    Use this article help you identify what model and generation your iPod is.
    Identifying iPod Models
    Or check out this link that lets you input your iPod's Serial # and then identifies this information for you.
    http://www.powerbookmedic.com/identify-mac-serial.php
    B-rock

  • Virtual time hierarchies

    Hello BW expert!
    I have problems with virtual time hierarchies. I activated a time-hierarchy related to time-characteristic 0CALMONTH (Cal. Year/Month), and to do so I had no problems.I choose the time hierarchy called 0HYEA1_QUA1_MON which starts from root "Halfyear", goes down with the child "Quarter" and finishes with leaf "Cal. Year/Month".
    The problems I have is that when I try to use this hierarchy in a Bex report (I restrict characteristic OCALMONTH), the hierarchy doesn't display month value for year 2005!I mean that, for example, it doesn't display value "April 2005", but in my Infocube this value is stored!
    What can I do?
    Thank you very much.

    There is a tab before the hierarchies - General Settings in transaction RSRHIERARCHYVIRT - increase the time interval in the top range.

  • Check Box in SAP Business Partner

    Hello Everybody,
    I'm working with BUPT and trying to place a check box in SAP Business Partner (Role: MKK).
    Actually the Check box is delivered from SAP standard (Function Group: FSBP_05 and screen 0201) and I'm trying to custom it under Partnerdaten "BUP310". I have gone through the standard customizing procedure. Still the Check box field is not visible on the screen.
    Can anybody please provide me a tip or any kind of Doku.
    Thanks and Regards
    Ravi

    Hi Ravi, check this.
    See these related SAP OSS Notes.
    Note 675800 - Business partner enhancement SRM on maintenance screen
    Other Related Notes
    937838 - Customer fields on BBPMAININT: Dump on Vendor Data tab
    821235 - Customer enhancement for maintaining BP causes errors
    672960 - User-defined fields 2
    494966 - Composite SAP Note for Easy Enhancement Workbench (EEW)
    484597 - Customer enhancement of CRM applications
    937838 Customer fields on BBPMAININT: Dump on Vendor Data tab
    853818 DLA: Error messages in BBPMAININT not displayed
    847618 DLA: IBU data not displayed 14.10.2005
    821235 Customer enhancement for maintaining BP causes errors
    cheers,
    Hema.

  • How to put header in a report?

    hi,
    I am working on a  cash flow report. In this, in the selection screen, I am giving selection fields as Profit Center and Period ( MM/YYYY) format.
    now, while displaying the report I want that the period which has been selected in the selection field, should get displayed column wise.
    For eg.
    If the period selected is: June'2005 To August'2005.
    then, it should get displayed as:
                    June'2005   Jul'2005   August'2005.
    So, is there any function module which can be used for displaying it in the report in the above mentioned manner.
    IF you want any other detail about the report. Just let me know.
    Regards,
    Ravi

    You can do this with a little creativity and a dynamic internal table.  Here is a sample program which uses a select-option for date instead of month/year. But it can be done the same with month/year.  Also the formatting of the headings and data will need to be manipulated a little.
    report zrich_0003
           no standard page heading.
    type-pools: slis.
    field-symbols: <dyn_table> type standard table,
                   <dyn_wa>,
                   <dyn_field>.
    data: begin of it_datum occurs 0,
          datum type sy-datum,
          end of it_datum.
    data: fieldlist type table of rstrucinfo with header line.
    selection-screen begin of block b1 with frame title text-001.
    select-options: s_datum for sy-datum.
    selection-screen end of block b1.
    initialization.
      s_datum-sign = 'I'.
      s_datum-option = 'BT'.
      s_datum-low = sy-datum.
      s_datum-high = sy-datum + 7.
      append s_datum.
    start-of-selection.
      perform build_dyn_itab.
      perform build_report.
    * Write headings
      loop at it_datum.
        write: it_datum-datum.
      endloop.
    * Write out data from table.
      loop at <dyn_table> into <dyn_wa>.
        do.
          assign component  sy-index  of structure <dyn_wa> to <dyn_field>.
          if sy-subrc <> 0.
            exit.
          endif.
          if sy-index = 1.
            write:/ <dyn_field>.
          else.
            write: <dyn_field>.
          endif.
        enddo.
      endloop.
    *  Build_dyn_itab
    form build_dyn_itab.
      data: index(3) type c.
      data:   it_fldcat type lvc_t_fcat,
              wa_fldcat type lvc_s_fcat.
      data: new_table type ref to data,
            new_line  type ref to data.
      do.
        clear wa_fldcat.
        wa_fldcat-datatype = 'QUAN'.
        wa_fldcat-intlen   = '10'.
        wa_fldcat-fieldname = s_datum-low.
        append wa_fldcat to it_fldcat.
        it_datum-datum = s_datum-low.
        append it_datum.
        if s_datum-low = s_datum-high.
          exit.
        endif.
        s_datum-low = s_datum-low + 1.
      enddo.
    * Create dynamic internal table and assign to FS
      call method cl_alv_table_create=>create_dynamic_table
        exporting
          it_fieldcatalog = it_fldcat
        importing
          ep_table        = new_table.
      assign new_table->* to <dyn_table>.
    * Create dynamic work area and assign to FS
      create data new_line like line of <dyn_table>.
      assign new_line->* to <dyn_wa>.
    endform.                    "build_dyn_itab
    *      Form  build_report
    form build_report.
      data: fieldname(20) type c.
      data: fieldvalue type i value '10'.
      data: index(3) type c.
      field-symbols: <fs1>.
    * Put data into the tabl
      loop at it_datum.
        do.
          assign component  sy-index  of structure <dyn_wa> to <fs1>.
          if sy-subrc <> 0.
            exit.
          endif.
          <fs1> =  fieldvalue.
          fieldvalue = fieldvalue + 10.
        enddo.
    * Append to the dynamic internal table
        append <dyn_wa> to <dyn_table>.
      endloop.
    endform.                    "build_report
    REgards,
    Rich Heilman

  • Massive amount of issues on brand new iPod 20GB

    After wasted the last 5 evennings trying to install a BRAND NEW iPod 20Go (following the iPod Getting Started), due to an amazing and a never ever experienced amount of issues, like :
    1. from the brand new and never used iPod CD that comes with the iPod : « error 1628 : unable to complete script based installation » ???;
    2. from iPodUpdater 09.23.2005 : not updating or restoring the iPod or : « your iPod model is not manage by this application » ???;
    3. from iTunes : not recognise the iPod, not transfer my songs or only 1 or some… but never the all of them, not eject the iPod, suddenly froze and crash WinXP… ???;
    4. and finally, since 09.28.2005 / 8 PM I just can’t run iTunes 5.0.1.4 anymore :
    - even after I’ve uninstalled it and deleted it and redownloaded it and reinstall it several times from different mirrors :
    - during the installation the assistant wizard don’t show the installation of Quicktime (suppose to install iTunes 5.0.1.4 and Quicktime 7);
    - as soon as the installation is complete, WinXP always display the same error msg :
    « iTunes has had a problem and must close … sorry for… » ;
    5. (…)
    … and after having read all the Tips and Troubleshooting finding in iPod Getting Started and on Apple.com support page (iPod tutorials + discussions) I’ve SEVERAL times :
    6. uninstalled (Control Panel) iTunes/iPod/Quicktime
    7. RESTART the PC
    8. manually deleted all iTunes, iPod, Quicktime and Apple files from the program files and all the temporary files related (C:\Documents and Settings\…) to the precise date of iPod + iTunes installation
    9. cleaned the harddisk (Cleandisk / WinXP system tools)
    10. deleted the History, the Cookies and everything from the navigator (Thunderbird with last update 09.29.2005)
    11. uninstalled and delete all the unused programs and files to have the maximum amount of harddrive space
    12. defragmented the harddrive (WinXP system tools)
    13. updated and ran the antivirus
    14. updated and ran Ad-Aware and Spyboot Search & Destroy and so on …
    15. RESTART the PC
    16. downloaded and installed the last WinXP updates (Windows Update)
    17. RESTART the PC
    18. unpluged other device from the USB 2.0 PCI hub card
    19. RESTART the PC
    20. downloaded iTunes 5.0.1.4 (09.20.2005 file), iPodUpdater 1.2 for iPod 20GB color display (09.23.2005 iPodUpdater) from Apple.com
    21. checked both files with my last updated Computer Associate antivirus
    22. snoozed the Antivirus
    Then installed the last iPodUpdater and RESTART PC :
    23. run iPodUpdater, plug the iPod (USB 2.0 port)
    - WinXP identified the iPod as 1 harddisk (open a window as for any other external harddrive)
    - then iPodUpdater enable the restaure option
    - click restaure : WinXP error msg « unable to lock iPod... try again » ; close iPodUpdater
    24. then try to disconnect safely the (G iPod with the green arrow button in the WinXP taskbar
    - WinXP error msg : « unable to stop Apple iPod USB device now, try to stop it later »
    25. then click My Computer : iPod = (G
    - right click on (G , select eject, no flashing sign « do not disconnect » on iPod
    -- unplug the iPod
    26. then rightclick My Computer, select manage, select device manager, expand controller bus usb, rightclick on concentrator usb
    - select property : « device works correctly »
    - select driver = Microsoft 5.1.2600.0 (xpspsp2rtm.
    0408.03.2158 on C:\WINNT\system32\drivers\usbhub.sys)
    27. open task manager (ctrlaltdelete), process, stop iPodService.exe, run iPodUpdater again, plug the iPod
    - iPodUpdater identified iPod (serial n°… / version 1.2 / 19Go …) already up to date
    - click restore, restauration process start and end, plug the iPod in to the electrical device,
    - iPod restored OK !
    28. then install iTunes 5.0.1.4 + Quicktime 7.0 and RESTART the PC
    - run iTunes respond to the questions and import my music file (OK), close iTunes and RESTART the PC
    - Plug iPod (flashing do not disconnect ), iTunes starts (OK),

    Hi Martha
    Some others in iPod discussions solve theirs troubles :
    - by buying and installing 1 Firewire card (6-pin port) + the Apple 6-pin FireWire cable : $ 70 - $ 110 or more for both items (good idea if the problem comes from the USB 2.O port and cable, so with FireWire connection created by Apple you just avoid any USB 2.0 connection. But, if you can quickly tranfer some songs and play them on the iPod... it doesen't sound like 1 USB 2.0 connection to me),
    - by connecting iPod on 1 Apple Computer. Know this is not THE solution. But so you can check if the problem comes from
    your iPod or/and your USB 2.0 connection and at the end you temporarily can iPod all your songs. If you don't know somebody with an Apple computer, I'm quit sure... if you can go to 1 Apple store and explain this, they will let you check your iPod and USB 2.0 cable, hope so at least.
    Since the 9.28 8pm, I just can't install iTunes 5.0.1.4, as soon as the installation process is complete, WinXPsp2 always display the same error msg :
    « iTunes has had a problem and must close … sorry for… " ... even brand new files downloaded again and again and .... at Apple.com (http://appldnld.m7z.net)
    For me, even if iTunes 5.0.1.4 is already on the market, this iTunes update is definitively not Windows XPsp2 compatible yet.
    So, still waiting a working iTunes (n) version truly XPsp2 compatible from Apple/Microsoft people, and quickly because
    warranty time is running and I still want to be able to exercise my warranty rights before the end of it.
    Good luck
    Olivier

  • Prompts Value Order

    Hi,
    Is there any way we can control prompt value sort order? I meant I had defined a prompt in a report and currently value are displaying ascending order (2005, 2006, 2007, 2008). But I want to display descending order (2008, 2007, 2006, 2005). How to control this?

    Hello,
    If you are talking about dashboard prompts, then you can alter the sort order by Modifying Prompt. Select 'SQL Results' under 'Show' and then specify the order by clause for the SQL. If it is the answer request prompt, then you should be able to do the same. Select 'SQL Results' under 'What Values should be shown to the user?' and then specify the order by clause.
    Thanks!

  • Will I need a new graphics card?

    Final Cut Studio 2 required specifications:
    "An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    A display with 1024-by-768 resolution or higher"
    I just bought an iMac with these graphics specs:
    "ATI Radeon HD 2600 Pro:
    Chipset Model: ATI,RadeonHD2600
    Type: Display
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: ATI (0x1002)
    Device ID: 0x9583
    Revision ID: 0x0000
    ROM Revision: 113-B2250F-219
    EFI Driver Version: 01.00.219
    Displays:
    iMac:
    Display Type: LCD
    Resolution: 1680 x 1050
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display Connector:
    Status: No display connected"
    Do I need a different graphics card to run final cut?

    No need to worry. You'll be fine with the GPU in your iMac. I've been using a G5 iMac (w/ a second display) since August 2005, and I've had no problems.

Maybe you are looking for

  • Auto cancellation of schedule lines

    Hi, We have a requirement fo auto cancellation of schedule line such that after some time of schedule line delivery date system should cancel the schedule line if the GR has not been posted so that new schedule line needs to be generated by MRP . In

  • How to use File History from same account on 2 PCs to same NAS

    I recently upgraded from Win7 to Win8.1 and am unsuccessful in using File History as I'd like.  Perhaps it's a configuration issue, so I'll explain my goal, what I've done, and the problem: I have a PC and laptop, both in the same HomeGroup and I use

  • Payment of SA / AB documents in F110

    Hello Experts I've noticed that F110 is not making payments when we specifically select the SA / AB document & we'r navigated to Edit proposal screen during display proposal option. This is not the case with KR / RE docs. I've thorougly compared thes

  • No Open If Statement

    Hi,   In my program, Iam getting the error that 'no open if statement'.Please correct me. Also please let me know the functionality of hide statement in this progra,. REPORT  ZMTSHPRG7                               . TYPES: BEGIN OF TY_KNA1, KUNNR TY

  • Download hangs on certain podcasts, movies or songs

    I have several podcasts and movies that will start downloading. Then the downloading stops. The banner at the top continues to flash that it is downloading but bar stops moving. After several seconds of no activity the download stops. I can start ano