Trying to add enhancement point in standard code

Hi,
i am trying  to add enhancement point in standard code using the steps givenin the link.
http://www.sapdev.co.uk/enhance/eframework/ef_implicit.htm
but i am not able to get the enhancement point .
Could you please let me know if there is anything additional steps to be followed.
or are there config setting that has to be checked.
Regards,
saleha

Hi Sandra,
when I try to create an enhancement point by pressing enhance (shift-f4) going in edit->Enhancment operations->Create it gives me a message 'In this mode you can create implementations only'. (At this point my cursor in the code is at the point I want to make it happen)
So the Q is how do I get the E.point in the code at the point I desire.
Regards,
Saleha

Similar Messages

  • Enhancements points in standard code

    hello!
    Can I use enhancements points in standard code? How do it?
    Thanks!!

    Yes, you can. That is really the whole point,  as you would not need enhancement points in a custom program. 
    In order to leverage the Enhancement Framework, you should familarize yourself with the documentation and then go from there.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    Regards,
    Rich Heilman

  • Enhancement Point in ABAP code

    Hi ,
    I am working on an upgrade from 4.6 to ECC ,so have a  have a standard FM with an enhancement point , how do i know if there is an implementaion for that or not and can i debugg the code in the enhancement point .
    When i click on the enhancement spot it goes to a class and i can see the code in that methods but cant set a breakpoint in it , kindly suggest what should i do.
    Regards
    Arun

    Hi
    double click on the enhancement point. it will take you to the enhancement spot into which it is defined.
    click on the tab "enhancement implementation". it will show you all the existing implementation. I you find nothing than this point is not implemented yet.
    if it is taking you to a class then it is a BADi implemented via new enhancement framework. to find it is implemented or not, repeat the above steps. to debug it:
    in the left section, expand entries under heading BADi definitions.
    double click on "implementations". you will get the existing entries on right side. double click on this entry. on the left side under heading "BADI definitions" you will get the implementing class.
    double click on it to get the class name.
    go into the class and see the method implemented. u try to hard code the break point into the method,
    activate it and then try to debug it.
    Thanks
    Vishal Kapoor

  • How can I add enhancement points in a function module

    Hi,
      I want to create the Z Enhancement implementation in ABAP. We are on ECC 6.0. I want to add a Z enchancment in funciton module MRM_FINAL_CHECK can you please let me know how
    Thanks for reading.

    Hi Srikrishna,
    Refer following link.. I'm sure these are very helpful to u..
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
    Regards,
    Vivek

  • Does Web Dynpro support adding Enhancement Points/Sections

    Hi,
    Can someone answer whether the ABAP Web Dynpro framework is supposed to support add enhancement points/sections to code within a component method?
    Cheers
    Michael Arter

    hi,
    check out this link :
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/c21ba177be3376e10000000a421937/frameset.htm
    also check out the foll post:
    Pre-Exits and Post-Exits for WDA
    hope this will surely help you!!!
    Thanks & regards,
    Punit Raval.
    Edited by: punit raval on Jul 9, 2009 10:53 AM

  • Enhancement points in ECC6.0

    Hi Friends,
    can anyone please share the documents related to enhancement points (spots) in ECC 6.0?
    Regards,
    Ravi.

    Enhancement points - Changing standard SAP code using the implict and explicit enhamcement points
    Enhancement points are basically hooks at certain defined points within the ABAP code i.e. at the beginning and end of a FORM. These hooks allow you to attach your own custom code which will be executed as if it had been hard coded into the code using a modification. Unlike hard coded modifications these will not be lost during upgrade or patching exercises.
    There are 2 types of enhancements with the enhancement framework:
    1. Explicit enhancement points: These are basically hooks already coded into the program by SAP at various points of the code. See program RIAUFMVK for examples of these! These are very easy to implement simply go into enhancement mode of SE80 and right click on the enhancement point where you want to add your code and choose u2018Enhancement Implementation->Createu2019 Give it a name, description and assign it to a change request (should not be a Z package) and then simply add the code as normal.
    2. Implicit enhancement points: These are basically points within ABAP code where an enhancement point is implied, and in which case can be created. Examples of implicit enhancement points are at the beginning and end of FORMu2019s, at the end of a program, include or function module etc. Click here for demonstration of how to implement an implicit enhancement point!
    Search for enhancement in sdn you will get demo also.

  • Enhancement Point Creation

    Can we create our own enhance point in standard program ie I want to create a point where i need to change & implement the new logic at that point.plz suggest

    Hi ,
    You can create your own enhancement points.Go to the standard report in which you want to add your own code.Press SHIFT + F4, ths standard code will come in Edit mode , but you can not edit it.
    Now goto
    EDIT ->Enhancement operations ->Show Implicit Enhancemet Options.Yellow  lines will come at few places.These are the points where you can create your own enhancement points and add your code.You need to figure it out , where you can add your code. Right click on the yellow line ->enhancement implementation -> create, here you will be asked whether you want to create declaration or write your code.At the begining of the enhancement point you need to write declarations.
    At the end of the enhancement point , again follow same procedure , here you need to write your code logic.
    And then you have to activate the enhancement point.
    Hope it helps
    Edited By
    Tejaswini Khante

  • Enhancement point in reserved namespace like /LTIL/

    We are working in reserved namespace like /LTIL/ for the product which will be installed as Add On package.
    We want to add enhancement point so that the future client user's can add their code to enhance functionality as per their requirement.
    Till implementation it's fine. But when we try to activate implementation we get syntax error
    SAPL/LTIL/ENHS not unicode compatible.
    I suspect that SAP is creating program as /LTIL/SAPL/ENHS but validation creating file name as per normal scenario where reserved namespace is not used.
    Can any expert tell us what could be possible error ?

    Hi,
    Why cannt use the normal custom fields for the same
    regards
    Shiva

  • Does Access key required to implement explicit Enhancement point

    Hi All,
    Does Access key required to implement explicit Enhancement point in Function module or source code or etc.
    please clarify..
    thanks
    Bhanu

    Thanks for your reply Mr. Bala..
    I think i have not asked question correctly.. what i mean to ask is "to create the explicit enhancement point in the method(Source code), does ACCESS KEY required".
    Because when i tried to create enhancement point at IMPLICIT enhancement option system is allowing to create but when i tried to create at other than IMPLICIT enhancement option(in the mid of source code ) system is not allowed and displayed following message :
    "In this mode, you can create implementations only"
    waiting for your reply..
    Thanks
    Bhanu

  • Enhancement Point in MIRO transaction

    Hi all,
    Can anyone let me know the enhancement point in t-code MIRO before saving the document. Plz let me know if there is any enhancement spot.. plz help me out in this issue.
    Thanks in advance.

    hi
    good
    Following user exits are present in MIRO
    LMR1M001 User exits in Logistics Invoice Verification
    LMR1M002 Account grouping for GR/IR account maintenance
    LMR1M003 Number assignment in Logistics Invoice Verification
    LMR1M004 Logistics Invoice Verification: item text for follow-on docs
    LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006 Logistics Invoice Verification: Process XML Invoice
    MRMH0001 Logistics Invoice Verification: ERS procedure
    MRMH0002 Logistics Invoice Verification: EDI inbound
    MRMH0003 Logistics Invoice Verification: Revaluation/RAP
    MRMN0001 Message output and creation: Logistics Invoice Verification
    thanks
    mrutyun^

  • Add Anchor Point tool makes entire selection disappear

    I've encountered this off and on over the last few years from Flash CS3 to CS5. It doesn't happen on everything but right now I've got some hair I'm creating and I've spent the last 30 minutes trying to add anchor points and only successfully been able to add 3 or 4. Most of the time, adding an anchor point just makes my entire drawing disappear. Has anyone else encountered this? My work has all but come to a stop because of this problem.

    Problem Solved.
    Turned on Smart Guides (cmd-U) and that seems to have taken care of it.

  • How to know where the user exits or enhancement used in standard sap code?

    Hi
    I m pretty new to abap.
    How can I know where the user exits or enhancement used in standard sap code?
    As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
    thanks in advance.
    Moderator message : Search for available information, thread locked.
    Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

    Hi Henry,
    I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
    If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
    PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
    PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
    PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
    Srinivas

  • Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

    Hello,
    I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
    This is a new server install.
    The PowerShell error follows:
    add-windowsfeature : The request to add or remove features on the specified server failed.
    Installation of one or more roles, role services, or features failed.
    The referenced assembly could not be found. Error: 0x80073701
    At line:1 char:1
    + add-windowsfeature print-services
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
        Exception
        + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
       owsFeatureCommand
    Success Restart Needed Exit Code      Feature Result
    False   No             Failed         {}
    Any help with this issue will be greatly appreciated.

    Hi,
    I think you should start with chkdsk C: /F and sfc /scannow.
    Regards.
    Vivian Wang

  • Sap support for standard prog. w/ custom implem of implicit enhanc.points

    Hello,
    since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
    I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
    Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
    What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
    So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
    The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
    Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
    I hope I was clear.
    Thank you very much for your kind help.
    Best regards,
    sandra rossi

    I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
    I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
    Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
    To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
    Sorry, that does not help you much (but at least you read "the rules"
    Cheers,
    Julius
    ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
    Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

  • Standard code modification with enhacement points..

    hi,
    i need to modify a couple of my standard programs. I have been suggested to follow this approach.
    first get the acces key and go to change mode. then where u want to insert ur code, click on the insert button and get the insert block. Then here  I need to have an implicit point !! how do i create that ? where do i associate these enh points to an enhancement spot ??
    also, the advantage stated is that tomorrow if i dont need this modifications, i can just simply switch off the enhancement spot ?? or point ?? i am not sure ? any details on that ?
    another question is what happens when tomorrow sap changes this standard program. will my enhancement point/spot remian intact ?? what do i do to reapply my changed code as enh points ??
    can anyone please throw some more light on all these ??
    thks

    [Enhancement Framework>> |http://wiki.sdn.sap.com/wiki/x/cwXEB]
    "another question is what happens when tomorrow sap changes this standard program"
    SAP would use some logic, which will make sure they are not spoiling the enhancement points...
    rettkomv = xkomv.
    perform (^*&*&&*) using xkomv from saplv61a if found. "<< I can only remember this for now..
    xkomv = rettkomv.

Maybe you are looking for