Trying to attach the Eclipse profiler to JRockit

Hi,
I enabled JVMI (-Xjvmpi flag) in JRockit (jrockit-R26.4.0-jdk1.4.2_11) but haven't been able to attach an external profiler to it.
Any idea what port does JVMI use ?

OK, JVMPI does not specify a wire protocol. See this section from 1.6: "Therefore, the JVMPI does not specify a wire protocol between the profiling agent and the front-end. Instead, tools vendors design their own profiling agents that suit the needs of their front-ends."
JVMPI is an API to the JVM which you can use to build a profiler (although I strongly suggest you use JVMTI instead which is supported and has better functionality).
If you want to run a profiler (as opposed to writing one), there are lots of them out there: OptimizeIt, Mercury, YourKit, Compuware all have profilers that use JVMPI.
Regards,
/Staffan

Similar Messages

  • When trying to attach, the camera roll appears.

    WHen trying to attach, the camera roll appears

    If you are talking about the Camera Roll appearing when you attach your iPad 2 to a computer that is normal if there are photos in the Camera Roll. In this case the computer thinks that you have attached a camera.
    Does iTunes not see the iPad?

  • Error when trying to attach the Appraisal Submenu and function

    when i click on the link/function of Appraisal i am getting the following error in my Employee's SSHR responsibility:
    ERROR
    Can not access function PER_APPRAISAL_EMPLOYEE. This installation does not manage mode pl/sql. Please contact your System Administrator.
    plz help!

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Eclipse Profiler memory profile?

    does anyone know how to get a report from the Eclipse profiler on the 'heap dump' tab? I need to profile my class under this tab, but it just sits empty when i run in profiler mode.
    I tried going to the run->run->profiler tab and switching the profile mode to 'Heap, but to no avail.
    Any ideas? thanks!

    I don't know the answer to any of these questions.
    I do know this. Collection resizing usually means that the capacity of the Collection is doubled. When you mentioned about an array growing what did you mean? Could you post a sample of your code that does this?

  • How to alter the default profile for multiple users

    I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
    alter user abc profile profileabc
    The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
    Please help if you think that there can be a more efficient approach to this.
    Thanks

    alter user abc profile profileabcspool newsql.sql
    select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
    SPOOL OFF
    @newsql.sql

  • Out of scope error while attaching the attribute set and the operating unit

    Hi,
    Am getting the out of scope error when am trying to attach the attribute set "/oracle/apps/fnd/attributesets/HrOperatingUnits/OperatingUnitName_Transient"
    and the operating unit lov "/oracle/apps/fnd/multiorg/lov/webui/OperatingUnitsLovRN" from my page in JDeveloper.
    Can anyone help?
    Thanks

    Mostly
    It would just be a warning message you can proceed with it there are no issues.But if its an error please do as mentioned by Reetesh.
    Thanks
    AJ

  • Not able to attach the scanned document with Interaction Record in SAP-CRM

    Hi Experts,
    I have a scanned document and I am trying to attach it with Activity in Interaction Record.
    I maintained the document ID refering to scanned document in table TOA01 with interaction record guid; however the attachment gets displayed in SAP-CRM GUI but i am not able to see the attachment in SAP-CRM GUI.
    Please help if someone has encountered a similar issue or propose a way to attach the document with acitivity in interaction record.
    Regards,
    Amit Gupta.

    Hello Amit,
    I am not able to understand your requirement correctly. Are you trying to attach the Document as a Attachment to the Interaction record (or) trying to attach it as a Archive Link Document??
    If you could give me more info.. I think I will be able to assist you with this as I have worked in this area...
    Cheers..
    Anand

  • Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

    Dear Folks,
    We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
    For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
    SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
    And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
    Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
    What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
    And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
    Could you pls let us know what we are missing here.
    Thanks in advance.

    I meet the same problem, any solution?

  • CName Error When Trying to Attach Particular File

    I am using custom buttons to attach, view and remove attachment files to my LiveCycle form. Most files attach without any problem. I have a particular file named, "RECN-TrackingLog.xlsm" that I receive the following error when trying to attach this file to the form. If I copy the file to my desktop, it attaches to the form without any problem. It is named exactly the same. Any idea what is causing this error? I have included the script for the "Attach" button below.
    var myDoc = event.target;
    var sFile = "myFile"+Math.round(Math.random()*10000000000000);//Randomly generated number
    myDoc.importDataObject({cName: sFile});
    var myDataObject = myDoc.getDataObject(sFile);
    var sFileName = myDataObject.path;
    ListBox1.addItem(sFileName,sFile);
    NumericField1.rawValue = NumericField1.rawValue + 1;

    This error turned out to be caused because someone else had that networked file open at the time I was trying to attach the file. That's why when I dragged and dropped a copy onto my desktop, that "version" of the file was not open and would attach without any problem.

  • Trying to attach a Story script to a multicam edit

    I have a multicam edit of an interview which has been transcribed in Adobe Story.  I'm trying to attach the script so I can access points of the interview through the script metadata. Premiere doesn't seem to want to attach a script to a multicam sequencs, yet if I attach it to the individual clips (there are five of them) I don't see the script in the multicam meta.  How can I best utilize the embed script feature in multicam?  I am updated to all current versions of CC.  Thanks!

    I'm trying to do this as well. Trying to figure out the best post workflow when dealing with transcriptions and multi camera edits with separately recorded audio.
    So far I've attached Story scripts to audio files, then merged those audio files with video, then attached the story script to the merged clip and that all works fine. But seems like I can't create a multicamera edit from merged clips.
    Is there any way to attach a story script to a multicamera edit? Or at least see the script that is attached to clips within the multicamera edit?

  • Attaching the grid to the E-mail

    Hi All,
       I am trying to attach the grid to the E-mail. I am able to attach the chat using the xMIIChart(chart) actions. But I am not able to attach the grid to the e-mail attachement.
    Could any one share the idea.
    Thanks
    Muvva

    Hi Muvva,
    One quick answer is to put the grid data into a PDF Table in a PDF document.  You could probably build the html for presenting the data in the body of an email, but that would be rather tedious and time consuming.  Just build the PDF and attach it to the email.  You should be able to do that pretty quickly.
    Unlike building the chart object in an action block, you cannot save the grid object quite the same way.  I (and others) have been down that road and it just is not happening.
    Good luck,
    Mike
    Edited by: Michael Appleby on Sep 9, 2008 8:08 PM

  • Cannot attach the debugger using enterprise 8.1 ide

    I am trying to attach the debugger using the following params:
    Debugger = JPDA Debugger
    Connector = SharedMemoryAttach
    Transport = dt_shmem
    Name = jdbconn
    Timeout = 100
    I get the following message:
    shmemBase_attach failed: The system cannot find the file specified
    Can anybody help please.
    Thanks in advance
    StuartC_1

    First, don't use a static IP Address.
    Troubleshooting:
    Turn Off iPad and iPhones, WiFi router (remove from power), and Printer (remove from power).
    Turn on WiFi router
    Wait 30 seconds
    Turn on printer
    Wait 30 seconds
    Turn on iPad
    Try to print.

  • Restoring or attaching the *.mdf file

    Hai,
    I am trying to attach the *.mdf file then i am getting the error 1813.
    The problem occurs when our development database transcation running out of memory disk, then I dettach database and at the time of dettaching database some of users are connected. I kill the session of all users.
    After I deleted the log file. Now when i am trying to attach the database then I am getting the error no 1813.
    Anybody urgent reply

    1) move the existing .MDF file to a new location (to backup)
    2) Start SQL Server Enterprise manager, and create a new (dummy) database where the .MDF file is the exact same name and size of your old/existing .MDF. The ldf file can remain at 1mb in size. 3) Stop the SQL Server service and copy only the .MDF to the location of the new/dummy .MDF file. 4) Start SQL Server. At this point, the database should come up as suspect. You will then want to place the database into emergency bypass mode and rebuild the Transaction log. This can be accomplished by performing the following steps: a) Change the database context to Master and allow updates to system tables. Note you will be performing this within Query Anayzler:
    Use Master
    go
    sp_configure 'allow updates',1
    reconfigure with override
    go
    b) Set the database in emergency bypass mode:
    Select dbid, name, status from sysdatabases where name = '<database name>'
    -- Note the value of status and write it down for future reference
    begin tran
    update sysdatabases set status = 32768 where name = '<database name>'
    commit tran
    c) Stop and restart your SQL Server. At this point, the database will come up in emergency mode. At this point, you will be able to browse, but not update any data within the database. d) We will now want to rebuild the log/ldf file. To do this, you will want to run the following: DBCC rebuild_log('<database name>','')
    If you do not receive any errors, we will want to reset the status of the database by running the following commmand and restarting SQL Server:
    use master
    exec sp_dboption 'database name','single user',true
    go
    begin tran
    update sysdatabases set status = 0 where name = '<database name>'
    commit tran
    e) set database option to not allow updates to the system tables: sp_configure 'allow updates', 0
    reconfigure with override
    go
    f) stop and restart SQL Server
    When the server restarts, you will then want to launch Query Analyzer and run the following to validate the database and check the overall integrity: use master
    go
    sp_dboption '<database name>','Single user',true
    You will then want to run the following:
    DBCC checkdb('<database name>')    

  • I can't attach the JSF 1.2_04 sources to Eclipse project !

    Hello,
    I am using Eclipse 3.3.2. I am trying to build a ICEFaces project and I need the JSF sources for convinience.
    I have them, I am trying to attach them with Project>Properties>JavaBuildPath>Sun JSF RI 1.2_04>jsf-api 1.2> Source Attachment> Edit>External file.
    It's OK, but when I close the window and reopen it > there are no sources checked again.
    I have downloaded them from here : https://javaserverfaces.dev.java.net/download.html
    Please, help !

    [This is indeed a bug in Eclipse|https://bugs.eclipse.org/bugs/buglist.cgi?quicksearch=attach+source]. As far the only workaround is to add a new JRE via Window > Preferences > Java > Installed JREs and adding the desired JAR's as external JAR's, saving it and opening it again (!!) and finally attach the sources to the added JAR's. Then in the project properties choose the new JRE (and keep the same JSF JAR's in the web-inf/lib!).
    Yes it is cumbersome, but I suppose that this will be fixed in the next Eclipse release.

  • A script is trying to attach to the GUI  message is coming freequently

    Hi Experts,
    Only 2 or 3 users are facing this problem, that users are getting message regularly as'A Scripting is trying is attach to the GUI'.
    I have tried to reinstall GUI and updated Patch level but sill same problem is occurring. As per Snote-519858, i have checked profile parameter 'sapgui/user_scripting =TRUE', is also okay. and as per this note i have checked for this path (At the user's front-end machine, the 620 or newer SAP GUI for Windows must have been installed. Choose Customizing of local layout -> Options... -> Scripting, and then select Enable Scripting) but i couldn't see it. Please tell me how to get this (during the installation also i couldn't see the options) How to solve this error as soon as possbile? out client wont ready to change profile parameter on PRD.
    Gui is 7.10 patch is 13/ECC/Aix/DB2
    Thanks.

    As per Snote-519858, i have checked profile parameter 'sapgui/user_scripting =TRUE', is also okay.
    What u want is dont want to see is A script is trying to attach to the GUI  message is coming freequently.
    then u need to set dat parameter to false.
    What ur telling is only 2 users are facing this problme.
    I guess its the local settings those user have made in their GUI. for that refer below link and refer 6. Protection on the end user level
    http://www.synactive.com/download/sap%20gui%20scripting/sap%20gui%20scripting%20security%20settings.pdf
    Take a look @ how scripting works
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/591c31cf-0d01-0010-8ab7-a1f7d032a66c?overridelayout=true
    http://help.sap.com/saphelp_nw04/helpdata/EN/ba/b8710932b8c64a9e8acf5b6f65e740/content.htm
    Regards,
    Ravi

Maybe you are looking for