Trying to update to iOS 7.2... NEED HELP

ive been trying to update my iphone 4s 16gb to the new ios 7.2
ive passed through the first load screen but the phone has now frozen/locked halfway through the second load screen
(theres just an apple logo and a half loaded bar) i havent been able to use my phon for over 12 hours now.
some friends have suggested i try restoring a back up from icloud and from my computer and if worse comes to worst restoring to factory setting
but itunes wont allow me to do either as it says the phone is locked with a passcode (have tried all 3)
my lock button on the top right hand corner is also not working so i cannot even hold doen the home button and lock screen to reset/turn off
can anyone help???

Hi ganz91,
If your phone is frozen at an Apple screen after trying an update, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

Similar Messages

  • PC no longer recognises my iPhone after trying to update to iOS 5...Help!?!?

    When returning from popping out of the house, as the Back UP and Update was taking forever, I came home to find that my iPhone has updated to iOS 5 but failed to Restore itself.  On top of this my PC no longer recognises my iPhone and issues a message 'USB Device Not Recognized'.  Now I have tried several attempts at fixing this, reinstalling iTunes, disabling and re-enabling USB Drives but nothing seems to work.  So I am now left with an empty phone, no contacts nothing, which can't even connect to my PC.
    Any Ideas???????????????????

    I had the same problem, I shut down the computer, disconnected it, etc... nothing helped. I went to the Apple store and they fixed it by restoring my phone to factory defaults and then updating. When I got home I connected to Itunes and it synched all my information back to the phone. If you have synched your information to Icloud you have to do it there!

  • Trying to update an old 2002 iMac - need help!

    I'm trying to update my ancient iMac to a newer operating system. I was hoping I could simply download my purchased copy of Mountain Lion onto this machine, but to my knowledge I cannot access the Mac App Store on this machine. Can someone give me a nudge in the right direction of how I should go about this? Thanks!

    I'm sorry, but your Mac is way too old to update to Mountain Lion. Look here.
    http://support.apple.com/kb/HT5444
    Mavericks was released yesterday and Mountain Lion is no longer available in the MAS. You need to be running OSX 10.6.8 in order to have the MAS on your Mac in the first place.
    Maybe you should think about investing in a new Mac - or maybe a refurb, if you can't afford a new one, or settle for the OS that you are running now. As far as I know, you cannot buy Tiger which might be the next step up for your machine.

  • Hi, face issue that can not activate iPhone but can log in iCloud wed page with same Apple ID and Password after Iphone been update to IOS 8. Need Help. Thanks

    Hi, face issue that can not activate iPhone but can log in iCloud web page with same Apple ID and Password after iPhone been update to IOS 8.1.2
    Also in the iCloud 'Find my iPhone" , no Device been found.
    Been raise this incident, got the Case ID and call to Apple Support but it seems like out of office hour
    Need Help Thanks

    Yes, able to make a call to Apple Support but in the end still keep on going to try the Apple ID and Password.
    And it seems like the iPhone ID  in this device been locked
    May to know is that possible to ask the Apple Technician to unlocked the ID so i could activate the iPhone without log in any Apple ID?

  • "internal error" message when trying to update to IOS 5?? Help please :(

    When i try to update my Iphone 4 to IOS 5, it does it back up etc and then comes up with a message saying there is an internal error.
    I have the most recent version of Itunes, have tried re starting my mac, turning my iphone off and on, still the same message.
    Can anyone help me please??

    And that message is exactly what? What system? What update? You need to be a lot more specific and provide more info.
    Mylenium

  • There are times 5s lagging very bad after I update the IOS 7.03, need help

    Before I update to  my IOS 7.03, I don't have this problem before.  But now, once in a while my phone is lagging very bad, not sure of why.  But it will goes away after a while. Anybody else having the same problem? 
    It happens most of time during log in.  It's impossible to use the finger print log in when lagging; and when type in passcode, letter sometime take 1 second to respond on screen.

    Basics from the user guide are restart, reset, restore from backup, restore as new. Try each step in order until your problem is solved.

  • HT201210 tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

    HELP.
    tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

    it just says restore failed error 3194 but i can't find anything useful on google or anything i can understand, i don't get technology at all.

  • Today I tried to update to IOS 8 on my ipad 4. I thought I was doing everything right. I did it through itunes. I backed up before starting. It now is frozen. itunes says it's in recovery mode.get error 3014. HELP!

    Today I tried to update to IOS 8 on my ipad 4. I thought I was doing everything right. I did it through itunes.  I updated iTunes to 11.4.  I backed up before starting. It now is frozen. itunes says it's in recovery mode. The only options it gives me is to Restore so I say ok... after a few seconds  I get get error 3014.  It says this ipad can not be restored.  It has a button to click for more info which leads me to this page:  Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Please help, I have a back up I just can't get to it.  Why did this happen!!!
    HELP!

    I have since tried a few more things... suggestions found online...
    I tried using another computer, same house same internet link though... it downloaded the update again, took about an hour & a half but as soon as it finished it said it could not restore because "device could not be found".  I unplugged my ipad then plugged it back in so it would "see"  it but it just went right back to the "ipad in recovery mode needs to be restored"... then the same error 3014.
    I don't know if the computer can sense the ipad or what's going on.  On the screen when it wants to do the restore it has an icon of an ipad & it says "Serial Number: n/a
    The next thing I tried...  was right clicking iTunes & choosing "Run as Administrator".  It started another hour & a half download of the update... but then when it was done it went right back to the error 3014.
    Is there nothing that can help?!?

  • HT1222 I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

    I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

    The iPhone requires wi-fi to update if you try to update over the air, since the phone needs to reboot, thus disconnecting itself. You can update via iTunes and the computer, but you would not be able to tether to the phone for the internet connection, since the phone would disconnect. So, you can either update via wi-fi and the phone, or you can update with a computer that has an internet connection other than the phone.

  • TS3694 Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

    Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I have an Ipad 2 Model MC775LL, IOS 6.0.1 (10A523) and I am trying to update to IOS 6.1, but the download is taking too many hours. Is it normal?

    I have an Ipad 2 Model MC775LL, IOS 6.0.1 (10A523) and I am trying to update to IOS 6.1, but the download is taking too many hours. Is it normal?

    You have to connect the iPad to your computer to update.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Iphone went off after trying to update to iOS 8.1.3

    My iphone went off while trying to update to iOS 8.1.3

    Hey cliffordmien, 
    That is not good so lets see if we can get it back up for you. Try restarting your iPhone and try the update again. If you still have issues then you may need to update your iPhone through iTunes. If you restart your iPhone and it is booting up to the plug in to iTunes graphic you will need to restore it with iTunes. 
    Resolve issues with an over-the-air iOS update
    http://support.apple.com/en-us/TS4431
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Take care,
    -Norm G.

  • HT6010 I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

    I have tried to update my iOS 7.3.0 and I keep getting a msg saying bit connected to the Internet and I am connected by WiFi plus my phone has Internet connected also, I have repeatedly clicked on retry, still get message bit connected to Internet

    Try this support document http://support.apple.com/kb/TS3694 and look at this section.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors: 
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I tried to update the iOS and never finished the installation

    A day ago i tried to update the iOS of my iPad 2.
    Everthing looked good but it never started again.
    It's stuck in the tiny apply screen with the status bar under it.
    Have any suggestion of what to do?
    thank you in advance!!!

    Try this and see if it will restart the update. If it doe not work, you will need to restore your iPad using Recovery Mode.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    This explains how to restore with recovery mode.
    If you can't update or restore your iOS device

  • HT1386 my iphone 4 is stuck on an itune emblem when I tryed to update the ios 7 update.

    my iphone 4 is frozen on the itune emblem when I tryed to update the ios 7 software I had downloaded a few days ago.  How can I unfreeze my phone?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    NOTE:
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

    I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help!  There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

Maybe you are looking for

  • BP not getting replicated from CRM to ECC server

    I am currently facing an issue, it seems like the replication of BP from CRM to ECC is not working, I have created a few business partners in CRM for which the BDOC got processed completely but when I go and check these on the ECC side, I am not able

  • Using extra attributes in plain Http Adapter

    Hi All, I am using a Plain HTTP Adapter to send messages to XI. This is working fine but i'm facing a problem with HTTP variables. I need to send a flag as an http variable that identifies the message as a new message or not. It's important for me th

  • Disc won't play

    I just finished my DVD project in Encore 2.0. I have done projects before and burned them to single layer DVD+R discs and had no trouble. I now have a new faster PC with a dual layer DVD burner. I created the DVD folder structure in Encore first. Thi

  • How to send in xml tag a ESCAPE CONTROL ( chr27 )

    Hi, For a Check Printing custom (R12), I need to send to a matrix dot printer a xml file containing a "ESC J;" every 56 rows. The template that I'm using is an e-Text type. 1) Does anybody know how I can write this ESCAPE CONTROL in e-Text? 2) Does a

  • OPC datasocket write problem

    I have a main while loop (10sec timer)with heavy image analysis, and another while loop(0.1sec timer) that simply writes the resulting single number from the first loop into a OPC server via datasocket write function. While it does work, the resultin