TS1398 i tryed all of this an my iphone wont connect to wifi unless im like 5ft from router

my iphone wont connect to wifi unless im like 5ft from the router this happened after i updated my phone to 6.1

Same thing started on 1/30/13 for me first thing in the AM with my iPad mini.  If I am more than 10 ft away (line of sight) from my AirPort Extreme I get the not able to join network message even though it is showing 3 bars.  I was running 6.0.1 at the time and have just updated to 6.1 with no improvement.

Similar Messages

  • TS1398 my iphone 4s wont connect to wifi  its like unable to turn it on

    My iphone wont connect to wifi is like unable to turn it on

    Hello geordiebell,
    It sounds like your phone is not connecting to your Wi-Fi network. You can use the troubleshooting from the following article to help get that issue resolved:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Follow these steps to troubleshoot the above issues:
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have tried to update to IOS 7.0.6 today and now my iphone wont connect to itunes saying, itunes has detected an iphone in recovery mode you must restore this iphone before it can be used with itunes. How do you restore it?

    I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring.  How do I restore it? I cannot get my phone on at all?

    Click restore in itunes.

  • After trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

    after trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?

    You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
    Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212?viewlocale=en_US
    Good luck!

  • Today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listed the sound??

    today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listened the sound?? i couldnt recognize the problem with my iphone?? really need help!!

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

    Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
    There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

    I suspect it has to do with not having a more current operating system
    Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
    What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
    http://roaringapps.com/apps:table
    Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
    A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
    Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
    Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
    Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
    So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
    Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
    But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
    Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

  • My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all. Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all.
    My connection is fine because Im using it on my macbook pro perfectly, so the problem is definetly on apple tv.
    Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN

    From what I understand from this post, yes you do qualify for a replacement.
    http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/

  • Traded homes and iPhones in Europe now and this an old iPhone 4.2.1 unable to get my mail from mail or sign into icloud on the Internet in safari on this iPhone

    Traded homes and iPhones in Europe now and this an old iPhone 4.2.1 unable to get my mail from mail or sign into icloud on the Internet in safari on this iPhone

    You need an device (iPhone, iPad, iPod touch) with iOS 5 if you want to use iCloud. Furthermore it is also not possible to open www.icloud.com with Safari on an iOS device.
    But if you want to set up Mail on your device with iOS 4 then you can do it manually. Therefor follow these instructions for devices with iOS 4: http://support.apple.com/kb/HT5330

  • TS3430 I tried all of this and nothing worked. How do I get my Itunes back and working again????

    Apple
    Store
    Mac
    iPod
    iPhone
    iPad
    iTunes
    Support
      Languages       
    iTunes 11.1.4 for Windows: Unable to install or open
    Symptoms
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution Follow these steps to resolve the issue: Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website. Please contact the vendor for additional information. 
    Last Modified: Jan 29, 2014
    Helpful? http://support.apple.com/kb/TS5376#
    Yes   No
    Related
    iTunes 11 for Windows: Import music and video already on your computerAdd items from your computer to your iTunes library Drag a file or folder from the desktop to the iTunes window. If you add a folder, all the files it contains are added to your library. In iTunes, choose File > Add to Library, locate a file or folder, and click Open .
    iTunes 11 for Windows: Add artwork to songs and other itemsAdd artwork to music and video Click Add, select an image file, and click Open . Drag the art file to the artwork area.
    iTunes 11 for Windows: Use Genius Shuffle, Genius playlists, or Genius MixesKeep your Genius information up to date Your Genius results are automatically updated once a week when iTunes is open . You can update them manually—for example, when you add new music to your library from a CD or a website.
    iTunes, on my PC, is responding very slowly.I just updated downloaded and installed iTunes 11 .0.1 on my Windows XP professional PC and all seems OK until I try to access iTunes Store or attempt to turn on Home Sharing or try to do anything where iTunes has to connect to Apple. It takes forever to respond to a mouse click and then all you see is the candy cane line which never stops even after 30 minutes. Has anyone experienced this?
    Can't move my mp3 files Using my new asus notebook with window 8 and iTunes 11.0.2 version.This is a visual cue that iTunes will link to the files in their current locations. Contrast with the behavior when the files you are adding are located outside
    Can I sort album by year in iTunes 11?View>View options or command+j ... Now, if they would have added multiple genre tagging, I would be in heaven... ... For those on Windows you can use Ctrl+J to access that menu.
    Additional Product Support Information
    iTunes 11 for Windows
    Start a Discussion 
    in Apple Support Communities
       See all questions on this article See all questions I have asked  
    Contact Apple Support Need more help? Save time by starting your support request online and we'll connect you to an expert. Get started  
    Home >          Support 
    Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller.
    Apple Info
    Site Map
    Hot News
    RSS Feeds
    Contact Us
    Copyright ©  2014 Apple Inc. All rights reserved.          
    Terms of Use
    Privacy Policy

    The program can't start because MSVCR80.dll is missing from your computer
    Many thanks. Rather than the Apple document, I currently recommend using the instructions from the following user tip with that one:
    Troubleshooting issues with iTunes for Windows updates

  • Windows needs to install driver software for your Apple Mobile Device (recovery mode) what do i need to do for this error? i tried all the options and my ipod wont work , need help???

    i am using ipod touch 4g

    rishiv93 wrote:
    i tried all the options...
    Did you follow this article about Apple Mobile Device Service? http://support.apple.com/kb/TS1567

  • TS1398 I tried all solution but still i am unable to connect to my wifi. It started yesterday when my ipad cant connect to wifi.

    I tried all solution but still i am unable to connect to my wifi. It started yesterday when my ipad cant connect to wifi.

    It's hard to provide help when your question starts out with, "I tried all solutions" however here is some troubleshooting advice.
    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • I cannot activate imessage have tried all the suggestions but still it wont activate in the messages-send,receive settings, i have tried to change location to saudi arabia for my account but there is no option for saudi arabia in the list, i am stuck

    I Have been trying to activate imessage with 0 success, please help, i have 2 devices i am using with my apple id , messages are working on the ipad but not on the iphone, have tried all the suggestions on the support pages.

    Hi omerkawan,
    It sounds like you may be experiencing issues with your iMessage activation. Here is an article that will provide you with some troubleshooting steps related to this issue:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • TS1559 I've tried all the so called solutions countless times still no wifi

    Please help, I've tried all of the soloutions posted. I've restored network setting so many times now i've lost count originally it did work for a time then it would go off again. Now it doesn't do anything. I've even restored my phone to factory settings and restored using itunes more than once, still no joy...I'm now losing all patience. Any other ideas.

    If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • My iphone wont connect to face time and imessage, i've narrowed it down to its trying to connect through my phone number, but when i change to apple id it the screen for the password keeps coming up over and over

    i have narrow my problem down to imessage and facetime are both trying to use my cell phone number to connect but because i am connected thru wifi it wont let me.  I went into the imessage and facetime setting and try to change this to my apple id, problem is it asks for my password and keeps saying its not right, i have the right one, why is it doing this????

    i had this problem, i turned off imessage, turned off phone, turned on phone, turned on imessage and let it reactivate.

Maybe you are looking for

  • Unable to get job status via BIP web service

    Hi, I'm scheduling a report job using the method scheduleReport of the ScheduleService web service. The method returns the jobId correctly, then I check the job status using getScheduledReportStatus. Every time the method returns jobstatus = "Schedul

  • Problem with Billing Information

    Hello, Just recently, about 5 months ago, I recieved a Visa giftcard for graduation. I used that as my billing information; chose VISA as the card and then put in the card number. After I was done picking my desired songs, it told me there was a prob

  • Types of LWP

    Hi Experts, There are two types of LWP. One is on medical ground and other is non medical. If LWP is on Medical grounds then only Basic , Dearness Allowance, Dearness Pay will reduce. If LWP is on Non medical grounds, then all wagetypes will be affec

  • XI - Communication Channel Monitor

    Hi, I have this 'interesting' situation where although I can view my Sender Comm. Channels with the Communication Channel Monitor, I'm unable to view my Receiver Communication Channels - no matter the Adapter Type. As a result, when I test my scenari

  • Pardon if this is silly, iMovie to regular DVD player

    This may seem silly but I just went to burn a DVD from iMovie (iLife 2005) and it says the recoreded DVD will not be able to be played in a regular DVD Player. Is it not possible to record movies I've created in iMovies so that friends and family can