TS1398 Ipod touch won't and never did connect. Turned off security to router. Went through troubleshooting list. Circle lines seem as if trying to connect. IP adress is obtained. Never does connect in a usable way??????????????????????????????????????????
Ipod touch won't and never did connect. Turned off security to router. Went through troubleshooting list. Circle lines seem as if trying to connect. IP adress is obtained. Never does connect in a usable way??????????????????????????????????????????????
Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj
Similar Messages
-
My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
My iPod touch is frozen and it will not turn off or anything. What do I do?
My iPod touch is frozen and it will not turn off or anything. What do I do?
I DON'T KNOW WHAT TO DO, PLEASE HELLP ME!!!!!
I need help!!!If not successful, try the remainder of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an ipod touch 2 generation, and the background light turned off. How do I fix that?
I was playing a normally day and I dont know what happened that the light turned off. Someone help me
my friend had stolen it but i got it back and she locked me out of it
Some friend.
but my computer is not letting me restore it, even though i know the code to unlock it. Anybody know how i can fix this
You might have to place it in Recovery Mode while connected to iTunes. http://support.apple.com/kb/HT1808
P.S. That font is very hard to read. -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
my ipod touch is disabled and says to connect to itunes, but when i do it does nothing. how do i fix this?
1) See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
2) Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
hi i recently buy iphone 5 from my frinde and i did not turn off find my iphone then i restore it now for active need the apple id and i do not have that what am i should to do?
saman666 wrote:
the guy i bought the iphone is not available and i can not find him
Then you have wasted your money. -
IPod touch won't sync or acknowledge connection
Hi -- this seems to be a somewhat common problem but nothing I've tried has worked. My iPod touch 3rd Gen won't show up in iTunes or charge when I connect via USB; actually, it claims it isn't charging but I've noticed if I leave it attached to my MacBook Pro overnight it does actually charge very slowly... although the battery still doesn't show a full charge, but it's closer than before.
I've tried two different MacBook Pros, different USB ports, and several different USB cables. Occasionally it acknowledges the connection very briefly, then appears to be disconnected again.
I've reset the iPod several times but that doesn't make a difference.
I can't restore the iPod because it won't show up in iTunes. I tried to force a restore by holding in the Home button while connecting via USB. But it doesn't matter how long I hold the Home button -- eventually it just asks for my password. It never shows the restore/connect screen.
The pin connection looks OK, but all I can figure is that there is some hardware connection problem with the pins. Does anyone have any other suggestions?
Thanks.Thanks, I figured that was my next move -- actually, I'm living in a country without real Apple stores or Genius Bars, but I can take it to an authorized Apple service center. I'll report back if they figure it out. But if anyone has any other suggestions to try I'm all ears.
-
I'm updating my iPod Touch 5th Gen and it says "Connect to iTunes" and I have, but nothing happens.
Okay, so, I unlocked my iPod and it said an update was available, so I tapped install. It wasn't connected to a power source, and I didn't think it'd make any difference if I was or not. So, I tapped it, blah, blah, blah, and then it said to connect to iTunes. So, I did, but my laptop didn't make the noise it usually does when I plug in the USB cable, so I tried it over and over again, but still the same result. I've updated iTunes to the newest version, and nothing happened still. So I decided to just cancel the update. But, now, "Connect to iTunes" will not go away from my screen no matter what I try. I've tried looking for solutions online, but none help. So, if someone could PLEASE help me fix this.
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
so this christmas that just assed i got a new ipod touch 4th generation! recently it has fallen and cracked and at the top left corner pieces came off, but after 2 days ago i couldnt get wifi at my house! i do not have a router but i always could get it perfectly in my room from my neighbor! but recently its been agravating me because i cant do anything about it, and at school id et wifi everywhere but now i only et it in one class!
and also i have the pinger textfree app and it wont let me get on it, it will sit there with the logo for 5 minutes and bring me back to my home on my ipod even without wifi, can someone explain to me why my ipod is acting all weird? i also resetted it 2 times and nothing happened i resetted my networks and nothing, someone please help me wiht my problem! ):Does the Ipod see the network?
It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the antenna. See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3 -
My daughter's iPod touch is disabled and I cannot connect to iTunes
My daughter's iPod went crazy the other day making noises (she was no where around) and when I found it the message said that the iPod was Disabled and that it should be connected to iTunes.I tried this and it said that it might need an upgrade and possibly to be restored. I clicked ok but it only got so far through the software upload before it returned to Disabled. I did a little searching and tried the connect while holding the home button thinking this would work but alas - no joy! I've repeated this and gone in circles looking at discussions and now discovered that I cannot even turn off the iPod (with the slider) I held done the home button and on/off, restarted and then... you guessed it, disabled. Any help?
Have you tried following the recovery mode instructions in http://support.apple.com/kb/HT1212 and summarized as:
-
we have had to reset our computer so any info on there is also erased. my daughter is in tears and I am frustrated. I have tried the basic technical support of resetting (holding the power button and the home key for 10 seconds, etc) nothing is working and we can not connect to itunes.
Here are Apple's instructions for placing the iPod in recovery mode:
iPhone and iPod touch: Unable to update or restore
You will have to restore to factory defaults/new iPod since yu do not have a backup. Yu can redownload some iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT1212 My ipod touch is disabled and it said connect to iTunes
My ipod touch have a password and my kid disabled it, and I can't use it.. How can I unlock it?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My son has a 3rd generation ipod touch. He couldn't remember the passcode and locked it up. It is saying that you have to connect it to Itunes to unlock it. However, when I hook it up to Itunes, it says that you have to unlock it first. I need help in getting it unlocked! Someone please help me???
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
If recovery mode doesn't work, try DFU (Device Firmware Update) mode instead using the instructions in this article.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
i bought this ipod off a friend its second hand but it worked before,, my friend cleared it out so my son can put his own stuff in it ,, but when i turn it on its shows only a usb conneting to itunes and when i connect it to itunes it says soft wear not reconignised and that i should reninstall itunes which i have done 3 times and still it wont connect to itunes,,
ok try this out:
turn the ipod off, than hold the home button and than connect it with your computer, keep holding the home button, if it work fine itunes will give you a message that it found a device in recovery mode and you can try to restore it
also explained here:
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
How can i know that the application is written in a correct way???
Dear sirs... it seems a little silly, but assume that i wrote an applicaion, how can i 1- be sure that its performance is good, i.e. did i designed the application to be fast? 2- if it is using SSL, how can i make sure the performance is high? 3- bef
-
ITunes 7.6.2 won't open after Quicktime update! Help!
Hello, I just updated Quicktime through Software update and now iTunes won't open. It bounces in the dock, stop and shows the light underneath in the dock, the colored disc mouse spins for 10 or 15 seconds and then it quits before any windows open. T
-
I've lost the application folder from Favorites. How do I get it back?
I've somehow lost the application folder which should be located in Finder - left hand side under Favorites. I can do a search and find a specific application located on the hard drive - so I haven't deleted them. But I want the Application folder w
-
Create a Lookup for ProjetServer field in SharePoint List item
Hi, I would like to display values in custom fields of MS Project Server 2010 in Ms SharePoint list 2010. The values ought to be displayed as lookup in a field of Listitem form. I would like to futher query and populate certain fields in New Items fo
-
Hi , I am writing a stand alone asynchronous messaging application using Websphere MQ. Though I attached a MessageListener to Reciever it is exiting the application instead of continuously reading/waiting for the messages. here is the code snippet fo