TS1398 put in wi fi name and password.  using wpa2.  connection never completes. any ideas?

I am having trouble connecting to my wi fi.  I have entered in my wi fi connetion name and the password, but the connection doesn't complete.  Do I have something in my settings that needs changing?

Does the iPod connect to other networks?
Does the iPod see the network?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • My IMac just stopped recognizing my Iphone and Itouch when I connect them?  Any idea why?

    My IMac just stopped recognizing my Iphone and Itouch when I connect them?  Any idea why or how to fix this?

    Did You upgrade iOS on the iPhone and ITouch?
    It might be that you now need a new version of iTunes for the new version of iOS.
    I am guessing here because you did tell us very much to go on.
    Allan

  • Changed email and password,now account all messed up. any ideas?

    I reset my email from hotmail to a gmail account as well as password. now all updates as well as my $ is no longer asseccible. any ideas
    <Titled edited by Host>

    Same thing happened to me!  I emailed Apple support, but it may be 48 hours before they respond.

  • I can not find firefox after it downloads. I keep getting a box that says I can't run it under this user, when I put in my user name and password it disappears

    The download appears to work ,it extracts the files then a box comes up saying I can't run it as this user( with the name of my login),. gives me the option to check my login name or check administer with a password. I have tried both, I am the only administer on the computer. Using windows vista. I have searched and some of the things like turorials etc are on my computer but I can't get the actual browser to open and there is no shortcut for firefox. Currently I am using IE since chrome kept freezing up, so does IE.

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • HT1420 I'm trying to authorize my computer but don't see the link that I can click after putting in my user name and password.

    Where is the link to authorize my computer for itunes?  I used to use my home computer but am away from home and want to use my laptop.

    It's on the Store drop-down menu at the top of iTunes - if you are using a PC with iTunes 11 on then control-B should get the menus to show (by default they are hidden on iTunes 11 onPCs)
    e.g. (image is from a Mac, but it should be similar on a PC)

  • My phone is locked and doesnt recognize me as a Developer.  Need to find UDID and cannot use Itunes or the phone, any ideas?

    I have a new phone, through AT&T insurance, and it does not recognize me as a developer until i register UDID.  But the phone is locked and has never synced to Itunes so how the **** do I find the UDID number?  This one is stumping me?

    Ok next problem currently my MAC is with my daughter out of state, I only have a PC in the house...

  • E72 Software update, user name and password

    I am trying to update the software on my E72 as it is full of bugs. I do the*#0000# and choose check for updates. The phone searches for updates and for a split second says "recieving data from T-Mobile" but then asks me for a user name and password. I have no Idea what this user name and password relate to? Anyone have any idea??

    Hi, I don't know anything about t-mobile, but I would call them.
    If there is an update for you, you could try to use NSU or ovi suite?
    Check here for updates: http://europe.nokia.com/support/download-software/device-software-update/can-i-update

  • CIC0 - CRM system requests user name and password

    Hi folks,
    I am a BASIS  gui  am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and  working with CIC0 transaction for several hours, suddenly a pop up comes up stating
    "The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
    This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up,  the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
    1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
    2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
    3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
    Thanks for any help...
    regards, Vikram

    Hello Vikram,
    Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
    Regards.
    Ruchit.

  • CIC0 - asks for user name and password on CRM

    Hi folks,
    I am a BASIS  gui  am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and  working with CIC0 transaction for several hours, suddenly a pop up comes up stating
    "The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
    This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up,  the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
    1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
    2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
    3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
    Thanks for any help...
    regards, Vikram

    Hello Vikram,
    Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
    Regards.
    Ruchit.

  • WLAN network always prompts for user name and password...

    Hi,
    Everytime Airport detects the WLAN of my institution, it prompts "Authenticating to network" and I have to put in my user name and password. Is there any way to store this information (probably in the keychain) so that an automatic login to the WLAN [as in my home network] is possible? The problem is that I can not find any button like "save this password in the keychain" [you can only put in user name and password]. Is it possible that my institution prevents automatic login?
    I also tried to create an item in the keychain directly - does not work.
    Cheers

    Hi,
    I agree in that there has to be a prompt for WLAN access. Otherwise just everyone could step by and use the access. But if I have to authenticate once, why should the institution prevent an automatic login for me in the future? Well, okay, if someone steals my notebook and knows my master password... hmm, so there is no way to locally (on my notebook) use some software that automatically puts in my user name and password so that I - maybe - only have to push the "Go/Enter/Access" button?
    For example, some institutions use browsers to authenticate and 1Password, but also Safari natively, can automatically fill in the information.
    Cheers

  • Computer won't accept my administrator name and password

    Whenever I attempt to update software or do anything that requires me to put in an administrators name and password it says "you must type an administrators name and password to make changes to software update" as if it can't read the words I had just typed. I've tried changing the passwords numerous times under system preferences and reseting the password using the start up disk. Nothing has worked...HELP PLEASE!! (bout to throw this computer, literally, I have no patience currently) Thank you

    Your Keychain login password must be the same as your admin password ... are they?
    Changing your keychain password
    You can change the password for your keychain at any time. However, *if you want your default keychain to be unlocked automatically when you log in, make sure your keychain password is the same as your Mac OS X login password for your account.*
    If your Mac OS X login password is not the same as your default keychain password, you’ll be asked for the password whenever an application needs access to your keychain and your keychain is locked.
    To change your keychain password:
    Open Keychain Access, located in the Utilites folder in the Applications folder.
    Open Keychain Access
    Choose Edit > “Change Password for Keychain ( keychain name).”
    If the keychain is locked, type the password to unlock it and click OK.
    Type the current password for this keychain.
    Type a new password, and then type it again to verify.
    For help choosing a secure password, click the key button to the right of the Password field.
    Click OK.
    And try here if you haven't... http://support.apple.com/kb/HT1631
    and here: http://www.tech-faq.com/reset-mac-os-x-keychain-password.shtml
    Message was edited by: Carolyn Samit

  • I dont have User Name and Password

    Hi guys I need reinstall my OS but and don’t remember the Username and password what I can do???

    Call Apple and ask them to send you a replacement install disk for your system. You may have to pay of course, but if you can't recall the user name and password used when the system was set up, then a copy of the install disk may be a very useful thing for you to have around.

  • HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

    I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
    I'd also like to make address labels and don't know where to find that either

    You would make address lables with the Contacts app.
    If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

  • Can I use user names and password of Microsoft Office Outlook for hyperion

    I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
    I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
    ANy suggestions?

    That depends on how your Outlook authentication is configured.
    Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
    Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
    Hope this helps,
    - Jake

Maybe you are looking for