TS3274 Suddenly connection to router is lost & cannot reconnect?

Suddenly my connection to router is lost. I put in security, etc, but it will not connect. My other IPad works fine. Help please?

It's Sheila. I solved the problem by rebooting the iPad. Voila. It worked.

Similar Messages

Wifi connection lost-cannot reconnect

My wife's new macbook pro ahs lost its wifi conection to our BT homehubi
It says it has a self assigned address of (numbers) and can not connect, we have run the diagnostics three times etc to no avail -
It used to work fine, nothing vhanged to it - My computer works fine

Hello Digital Finger,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Best of luck,
Mario

OfficeJet 8600 Pro: WiFi connection severed very often / Printer cannot reconnect

Hi there,
My printer´s connection to my wireless network is severed very often so I can´t use network print, scan and HP ePrint service. When I try to reconnect, the printer shows an error message. I printed a diagnosis page showing an error:
settings -> no filtering -> error (I´m a German user and translated that headword from German into English, maybe it´s not translated properly).
I tried following:
-checked if router firmware is latest: it is!
-checked if printer firmware is latest: couldn´t find the option but it installed one update when I set up the printer first time in November
-restarted router and made a reset of printer network settings: once it helped, now id did not
I just now took a look on my printer and saw it suddenly was connected to my network. Although I think it´s a question of time till next connection abort.
My OS is Windows 8 with latest updates installed. My router is a model of a leading German router manufacturer (AVM Fritzbox).
I hope HP will publish a firmware udate to fix that annoying bug. I can´t believe it´s a problem of my router because all my computers don´t experience connection aborts.
Kind regards,

Hello sentinel717,
There are several factors that can cause your printer to lose its wireless connection, including, but not limited to:
The network connection is no longer active, or has a low signal strength.
The HP product goes into Sleep Mode or Standby Mode.
The HP product is moved out of range of the wireless router.
Check out the linked article below for troubleshooting you can do to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4323652&tmp...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Server 4: Cannot connect to remote server: "lost contact with the AuthService"

Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
Any ideas on how to troubleshoot? Thanks --

Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
How to administer OS X Server remotely using Server App - Apple Support

My iphone has lost connection to the server; I cannot get e-mails.

My iphone has lost connection to the server; I cannot get e-mails. What can I do to fix that?

I recently put on a PowerPoint presentation at DU, in Denver Colorado; signed on as DU guest to access Internet link. SInce then I haven't been able to get e-mail on my Iphone - Cannot Get Mail, Server Stopped Responding. I tried all previous suggestions, such as rebooting phone, updating software etc. I went to MacBook Pro and tried logging on to yahoo e-mail. Apparently there was a security risk to my e-mail account so Yahoo locked up my account. I reset my password, it was verified through text message, and Voila it worked. Don't forget you also have to change this on your Iphone: go into settings; Mail, Contacts, Calendars; click on your e-mail browser, then account and enter your new password, click done and it will verify on you phone as well. Hope this helps!!!

HT4356 I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!

You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing!

WRT160N v3: Cannot connect to router setup web page with current Firefox or IE

Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this:
https handshake was OK.
First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
Has anyone seen this? or have I got a screwed up configuration (or router)?
Solved!
Go to Solution.

castor wrote:
"The connection has timed out", seems to affect servers at MozilllaZine, for Firefox on Windows...
I'm not sure what this has to do with my problem; my difficulty is only in trying to talk to the router configuration page. Everything else works just fine.
~~ Tools > Options
~~ Advanced (tab) -> Network (tab) > "Setting"
~~ (X) Auto-detect proxy setting for this network
I have "use system proxy settings". Since this is a home network and I'm not using a software proxy on my machine, I know there is nothing between me and the router.
Second, let me know if you have enabled 'https' in the router management page. What is the IP address on the computer when connected to the router. To check the IP address that you are getting from the Router... You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
This is not going the right direction, but to satisfy your curiosity:
   IPv4 Address. . . . . . . . . . . : 10.244.122.142(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.244.122.1
   DHCP Server . . . . . . . . . . . : 10.244.122.1
These are correct. (Since my telco DSL has me behind its own NAT router and has assigned my modem address 192.168.1.2, so I could not use Cisco/Linksys's manufacturer default address settings.)
There check the IP address and Default Gateway under LAN….
If it provides the valid IP address then try to connect the router to a different computer and then try to open the router setup page...
I have a linux virtual host (thanks to VMware) now running Firefox 5, and it can talk to the router setup page just fine, once I accept and save the invalid certificate the router presents, at https://10.244.122.1. So I conclude the problem is to do with the later version of Firefox (currently 11, but I had this problem with 10 and maybe with 8 and 9).

Connects to router but cannot send or receive data

I have a WRT54G. I can find the network and connect to the router, but I cannot send or receive any data. I tried plugging directly into the router and I am still unable to send or receive any data. Both computers on the router has the same problem. I did a reset of the router back to default settings and still no luck. Any thoughts? Thanks in advance for the help.
Solved!
Go to Solution.

First thing which you can try is, when you Modem and Router is connected to each other, Unplug the Power from Router and Modem , wait for 30 seconds then plug the Power to the Modem and once all the lights are solid then plug the power to the Linksys Router, now check if you are able to go Online. If still not then ....
Who is your ISP. So i think you need to Re-configure all the settings on your router back again.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Only Chrome can connect to internet, but the rest cannot. I have wifi or lan connect to router.

Only Chrome can connect to internet, but the rest cannot. I have wifi or lan connect to router.
All my connection to the internet had been stopped after I setup my new bought imac, and transferred data from my previous mac book.
The connect test showed I have no connection to the internet. But the interest is, I can connect to internet with Google Chrome, but in a quite slow connection speed.
Check several times with the router and switches, DNS, wifi, lan settings etc.
Give up after hours of trying.

At the same time, another mac book using the same router can connect to the internet. Even my iphone can also using wifi to connect to the internet.
Chrome in the imac can, but Safari and the internet test cannot.

Cannot connect to router E1000

Hello,
I own a E1000 router that I use with several wireless machines. I have no problem connecting to the internet.
Unfortunately, I cannot connect to the configuration of the router by typing https://192.168.1.1/ nor http://192.168.1.1/ in a browser, be it wirelessly or wiredly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router".
I tried to switch my router off and on, but that doesn't help. Totally resetting the router solves the problem, but not definitely.
Is there a solution that does not require resetting my router?
Thank you very much.

(I don't see anymore how to edit my initial post.)
The message displayed by Firefox is “The connection was reset” and not what I had translated into “Connection has been reinitialized”.
As far as the OSs are concerned, the machines that should be able to access my router are running Ubuntu, Android, Windows and an embed version of Linux. I tried with different webbrowsers, including Firefox and the Android Browser.
Please tell me if I should add any additional information.
I did a lot of search on the web and some say that similar problems come from the option of HTTPS that is selected for accessing the administration page. Is this correct? Should I abandon the idea of wanting a configuration with HTTPS?

Connected to router but cannot get on the internet

Hi,
I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
Can anyone help?
Thanks

Couple of things to check:
1) Are you using the wireless passkey that is on the Homehub label to log on with?
2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
Once done try and connect to internet.

Window Server cannot connect to Router?

I have installed a windows server 2012 r2 datacenter on virtual box using windows7. I installed AD Ds, DHCP and DNS on it. To install DHCP on window server I first disabled the DHCP service on my router and then on server I changed the ip address to static(10.1.10.2)
and added default gateway as 10.1.10.1 (IP address of router). But by doing that my server and other computer connected to network are not connecting to router.(i tried pinging router)? I am a student and I am working on a test lab using d-link router which
is further connected to main house router.
Thanks

Hi please check this artical hope this helps
https://blogs.oracle.com/fatbloke/entry/networking_in_virtualbox1

Unable to connect to router

Last night I was watching some random video on youtube on my laptop when suddenly I lost my signal. This happens often when I stream multiple videos, usually just an unplug and replug of the router's power cord does the trick. Didn't work this time. Annoyed, I tried to reinstall my router for a fix (is usually my last resort) but at the part where it tries to find the router I get this "Unable to connect to router!" message. I can still seem to connect to the internet with the router on the desktop, but my laptop doesn't even read my wireless. Pinging the router I get time outs, IPconfig gives me a 71.59. instead of a 192.168. I can't connect to the router configuration through 192.168.1.1 at all. I tried unplugging absolutely everything and reseting the router but I'm still stuck. Any help would be appreciated.

Hard reset router for 1 minute and reboot it. Check if IP address is 192.168.1.xxx or not.

Can't make direct connection to router

I cannot connect to Internet. The cable Internet router was connected to my Airport Extreme, but connection kept going down. Service guy tested all lines and put in new router with latest firmware. He then bypassed Airport extreme and made direct connection of router to IMac for testing. It worked for about an hour, then connection lost again (link light on router is down-Internet connection tested on IMac, but no connection detected). Put in new Ethernet cable, but no difference. Service guy uses MACS so tested my connection software and settings, but seems okay. Argh! I plug in PC laptop and connection with modem is fine. Service person said he has seen this before, IMac onboard card (ethernet) has failed.
Is this possible? have rebooted, tried diagnostics cd, unplugged/plugged all cables, etc. IMac 2 yrs. old. How is this fixed & is it costly? Thanks.

With Apple Care extended warranty it would be covered. I believe that the Ethernet port is on the logic board so that may need to be replaced. A new logic board is easily US$600.00.
But your explanation is a bit hazy. First the wireless connection had issues and now the Ethernet has issues?
Dah•veed

TS1398 Connected to Wi Fi but cannot get Internet access

Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS3274 Suddenly connection to router is lost & cannot reconnect?

Similar Messages

Maybe you are looking for