TS3276 provider email works fine, email client goes offline

our mac mail keeps getting kicked off line, while the provider email works fine

What exactly do you mean by "mac mail?" An iCloud account?

Similar Messages

  • Email randomly goes offline. Can I somehow get it to stay online unless I ask it not to?

    Thunderbird question.
    Email seems to work fine for me, but... It sometimes may go offline when I am on the web or have put it to sleep. I look for emails and the pop-up says: "You are offline. Would you like to go online...." Not a big deal, but annoying, and also troubling in that I don't know what I may have done to bring this on. It may happen several times in a day, or it may behave itself for a day or two.

    Thunderbird goes offline when it sees the network connection go away. Keep that from happening and Thunderbird stays online.
    Are you on a laptop that goes to sleep and powers down the network card?
    Have you discovered the online/offline icon in the lower left corner of the screen? It looks like 2 monitors. You can check and change states from there.

  • Publishing to MM works fine, visiting site goes to old domain.

    I had a website that I deleted from my iWeb, and created a new website on MM. I can publish the site just fine, but the button to publish the site goes to olddomain/MMUsername/website. The RSS subscribe button points to olddomain/MMUsername/rss.xml. If I publish to a folder on disk, everything works fine.
    On the site publishing settings (mobile me) The MM account reads:
    Mobile Me Account: [email protected] (olddomain.com)
    After Mobile Me Account: it is all gray and you can't edit it.
    I have studied posts for three hours, and have purged preferences, caches, etc., but I can't get rid of the olddomain.com.
    Any help would be appreciated.
    Steve

    H Zak,
    Thanks for the reply. I've tried with those settings but with now joy I'm afraid. I've used:
    And get:
    Clicking OK gives the following error:
    I don't understand since the folder zest-graphics.co.uk resides inside my public_HTML, as below:
    Any ideas? Appreciate your help with this, thank you.
    Neil.

  • I have recently encountered a problem when trying to access 3G network from IPAD2.  Wireless access working fine.  When going on safari it attempts to access page and then comes up with message that 'server stopped responding'.  I have tried resetting.

    I am unable to access 3G network, although wireless access is working fine.  When opening a page in safari it churns for a while and then says that server has stopped responding.  I noticed on one forum that it said something about changing brightness settings causing a conflict - coincidentally this first started happening after I had tweaked brightness.  I have tried resets etc, but still no joy.  Any ideas?

    Hi there humph86,
    You may find the troubleshooting steps in the article below helpful.
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    -Griff W.

  • Alesis Firewire Multimix 12 - GB "08 works fine -any problems going to '09?

    I've been sitting on this iLife '09 box for a while until things seems to shake out, which seems to be the case. Anyone have a different take? Snow Leopard is a different matter, but if you want to share, I'm happy to listen. My interest is in Alesis specifically. mike

    isteveus wrote:
    I've been using a Firewire Multimix 8 with 09 and snow leopard no problems what so ever.
    Is that really the case? I had heard that the Firewire drivers for the MultiMix 8 were not compatible with Snow Leopard. I have been holding off upgrading my production Mac for that reason alone. I've been waiting for Alesis to update their drivers for Snow Leopard.
    If I can be assured that the existing driver (dating back to January 2008) works fine under Snow Leopard, perhaps I will apply the 10.6 upgrade to my main machine.

  • Windows won't close, lockups, drop down menu bar not working - IE works fine - what's going on with firefox?

    Just bad performance from firefox the past couple of weeks
    I down loaded a fresh version of firefox, but it didn't help
    see above question
    Lockups, windows won't close, drop down menus not working
    Internet Explorer works fine

    http://support.mozilla.com/kb/Basic+Troubleshooting

  • Office Printer always goes offline - Help

    So, this is a network printer, an HP Color Laserjet CM6040, used in a small business by about 30 people, all using Network to print (usually not wireless but a few may be).
    The printer will be working fine and then go offline. Sometimes a reboot fixes, sometimes not. This is basically a new printer and the boss didn't sign up for service so we poor and downtrodden lowly workers have to try to make it work. We are not very IT-savvy. 
    Printer-necessary projects are piling up. 
    I've heard about a possible fix in setting the printer's IP address, but when I tried to follow on the printer's viewing screen the options mentioned in the solution I read didn't match up and I got hopelessly lost.
    Can anyone try to lead me through a solution on this type of printer that would stabilize the printer's IP address so it stops cycling and making our network think its under attack?
    Much obliged,
    Katie

    Sounds like your computer is powering down the USB ports to save power. Have you disabled that feature? Check under Device Manager. Check under USB Controllers. Check all USB Root Hub. Select Power Management and make sure: Allow the computer to turn off this device is UNCHECKED.

  • TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

    I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

    Thank you for heading me in the right direction.  I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information).   I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)??  In the Advanced box I clicked on "Use custom port:  465" and checked "Use Secure Sockets Layer."  Authentication:  Password; I have correct User Name and Password put in.  After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there. 
    What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message:  "Cannot send message using the server smtp.att.yahoo.com (etc.).  The SMTP server doesn't support TLS(SSL) on port 587.  Verify your account settings and try again."  That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails.  I guess my next step is to contact my email service provider, AT&T, and see if they can help me.  Thanks, again, for taking the time to respond and for giving me your input!  Much appreciated!

  • TS3276 Sound works fine on all programs, but has suddenly stopped on Apple Mail.  No "submarine" sound when I send or receive email.  I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound.  Any help?

    Sound works fine on all programs, but has suddenly stopped on Apple Mail.  No "submarine" sound when I send or receive email.  I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound.  Any help?

    deleted previously imported key chain originated from the previous system (why doesn't apple provide a migration for my key chain?). after the deletion mail can receive and send again and dreamweaver starts without hanging.

  • Thunderbird doesn't work as default email client when sharing pdf attachments. Works fine if Mail is the default client

    With Tbird set as the default email client, whenever I try to email the pdf, a message pops up that the default client can't handle sending the attachment. It works all the time if the native Mac Mail software is the default client..
    This forces me to save the pdf file, go to Tbird to send a message and then have to find the file in the folder structure to add as an attachment.

    My PDF software is Adobe Acrobat. So what is wrong with your Thunderbird software I must ask!

  • TS3276 Trouble sending email - receiving working fine

    I have both Charter and GMail email accounts (used for different purposes).  When I first moved to the MAC last November, both types of accounts worked perfectly.  Mail was received and sent easily.
    Now I am having a difficult time sending email from the Charter accounts.  I can receive mail in all accounts easily, but when I send an email (reply or new, with or without attachments), the Charter accounts take a LOOOOOONG time.  Frequently the Charter account times out and then I am asked if I want to use the GMail server to send the email.  This does NOT always fix the problem.
    This is now happening almost all the time on the Charter accounts.  When an email is taking too long to send, if I quit Mail and then re-open Mail, the email messages in the Outbox will usually send right away.
    I have access to the Internet; receiving email from all accounts is working fine, and GMail usually sends email fine.
    Does anyone have any ideas on how to improve sending of email time?
    Thanks

    You have a setting wrong OR. I also use ATT/Yahoo mail for some of my email accounts and earlier this morning the ATT/Yahoo email system was down.
    If that is not the problem, ATT/Yahoo system down, then it is simply you do not have the SMTP settings correct.
    The server address is smtp.att.yahoo.com and you must have your complete email address, [email protected]/net where attdomian is bellsouth/att/southwest(not sure if that is one of them)/whatever DOT com or net for your domain. It has to included what comes after the @ sign. Some email programs strip what comes after the @ sign out of your logon info. And of course you must have the correct password entered.

  • Sending email fails from outlook based account, others work fine

    blackberry9700
    Email worked fine until I had to reset my password for my work account, now I can receive email via the blackberry from this account but cannot send.  Send fails with "contains an invalid email address".  My service provider and RIM have not been able to figure this out so far.  Email account is not full, can access from a pc and send/receive.  so problem is specific to the bb system. 
    I have read where others have had this issue, and that plain txt messages work (they do not for me) and also that you can delete the message body of the original in the reply and that works (kludgy at best) but I cant seem to delete the body of the message in the reply.  any help would be appreciated.  thanks

    Hi and Welcome to the Forums!
    You neglected to say what your work email account is..."Outlook-based" hints that it is Outlook Web Access (OWA), but could also mean that you use the desktop Outlook client to access some POP, IMAP, or other email service...and it's the email service that matters since that is what BIS communicates with. Consequently, it's difficult to point you to firm solutions. But, here is a KB that might be useful.
    Plus, you can try this sequence:
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MobileMe settings no longer work in my email client?

    Hello!
    Yesterday my third party email client settings for my MobileMe/iCloud email stopped working. I am using the imap.mail.me.com/smtp.mail.me.com settings and everything has been working fine until yesterday when they out of nowhere stopped working. Did something change on apple's servers that I need to change? I have checked at least a dozen times and the passwords/etc are correct as you all recommend. None of my icloud settings or password was changed. What could be going on? I have ssl required checked as well as everything else that is listed on this page: iCloud: Mail server settings for email clients
    Thanks in advance!

    Those settings are correct. However non-Apple applications are asking for a password because Apple are now requiring app-specific password for third-party applications to access iCloud if you have set up two-step verification (in other words you have to obtain an individual password for any non-Apple program that wants to access iCloud).
    Select 'Password and Security'; click 'Generate an App-Specific Password' and follow the instructions. Once you have the password, copy it and paste it into the password field in the application. You should also keep a note of it (though you can generate a new one if required).
    If you haven't set up 2-step verification for your Apple ID then it's something else has gone wrong. You don't say what your system is (please always do). If it's a Mac using 10.7.5 or above, uncheck Mail in the list in System Preferences>iCloud and recheck it. If Windows, the same in the iCloud Control Panel. If you are using a Mac earlier than 10.7.5 please see
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • Microsoft exchange email worked fine, now iPad does not recognize the server

    exchange was working fine until friday of last week, then it can no loger recognize the server or passwords. i reset it, rebooted, changed the password even. still does not recognize. any help? ideas?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • TS3899 Cannot send email with new iPad air.  Works fine with old iPad and iPhone.

    Cannot send email with new iPad air.  Works fine with old iPad and iPhone.  I have deleted account and reinstalled.

    Thanks.  I got the problem fixed.  Spent time with the Apple folks and was kicked up to a senior advisor.  It seems the problem was with my internet provider - Tmie Warner.  Remember I could use the old ipad and the iphone to send mail.  I checked all the specifics between the three units.  It seems that TW is changing over from the RR.com  to TWC.com.  Since the new ipad air was just set up, it fell under the new TWC mail specifics. 

Maybe you are looking for

  • Missing Go button in Finder, can't access Library

    So I researched the forum posts and didn't find out how to get my Go button back. I need to access my Library folder. When I click 'Option' an arrow appears in place of the button "Show items with QuickLook or Slideshow" - no Go button appears though

  • Save for the web seq

    I need to save for the web an animation of about 100 frames. The problem is the only way to do that seems to be saving the file as a gif but I need to keep them frame by frame. I was wondering if there is a way to save for the web the entire sequence

  • Creating class

    Hey im creating a class as im trying to learn java Ive been following my book word for word on creating classes heres my code which i have finished but it still wont compile /**Person class*/ public class Person      private String firstname;      pr

  • Help creating .dmg - Fails

    I was backing up a users hard drive by using Disk Utility and saving the image to my backup server over the network. This usually works fine but now and then I get an error that says " Unable to create disk1s10.dmg Input/output error. I have run the

  • Crystal Reports Server and OpenDocument Solution

    Hello, I have just installed a trial version of Crystal Reports Server version 12. My objective is to be able to launch in context from another application a report from Crystal Reports. So, I have read the document on 'Viewing Reports and Documents