TS3367 PEOPLE WHO I FACETIME CAN SEE ME BUT CANNOT HEAR ME.

I am having trouble with the audio on facetime. I can hear and see folks I facetime. These folks can see me BUT they cannot hear me. what do I need to do?

I saw one post where the user said that dust got in the Mic hole. Vacuumed it and restored the audio.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
 Cheers, Tom

Similar Messages

  • HT204380 When I contact someone with FaceTime, they can see me but not hear me.  I can see and hear them.  What am I doing wrong?

    When I contact someone on FaceTime, they can see me but not hear me.  I can see and hear them.  No one has ever been able to hear me.  What am I doing wrong?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
     Cheers, Tom

  • When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

    When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
    If I use google it works. If I use Ichat, it works. If I use skype it works.

    This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
    Try turning down the speak volume (System Preferences->Sound->Output->Output Volume)  or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

  • HT2471 I have MacBPro and when I call wifes I Pad, she can see me but not hear me.  What can I do to fix this?

    I have MacBPro and when I call wife's I pad, she can see me but not hear me.  Any fix?

    HI,
    I presume this is  FaceTime you are using on the Mac ?
    Make sure these ports are open in your router
    http://support.apple.com/kb/HT4245
    9:37 PM      Wednesday; December 26, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • When using facetime the other party can see us but not hear us

    When trying to use Facetime, we can see and hear the other people, but they can only see us.  Any suggestions or settings for us to check?

    Learn sign language?  
    Or
    Probably the first thing you want to do is close face time, then doulbe tap the home button to see the task bar... Touch and hold any of those icons until they jiggle, then close them all off by touching the minus sign.   Then reboot the pad by holding the sleep and home buttons until the apple logo appears.  Ignore the red slider. 
    Sometimes this reset fixes bugs.
    Then, confirm your mike is working.  Open any app that records things, and see if it hears you.  There have been some discussions about broken mikes.
    Then try it again.

  • I put facebook on my mac -pro book and i can see and here other person , but he can see me but cant hear me what should

    i got a mac-pro and i put facetime on it and i can see and hear other person but he can see but not hear me , what should i do

    Make sure in FaceFime>Video the correct Mic is selected
    Also, go to System Preferences>Sounds>Input and make sure that mic is selected and the make sounds and see it the light light up with changes in volume.

  • Can see internet but cannot see modem

    I have several machines and printers in my house, all of them are in some way - with or without wires - connected to the AEBS. System works great! I recently moved from dial-up (through the AEBS) to WiMAX. What a difference!
    While I have many machines in the house, I have reduced the set-up for this testing to the two scenarios presented. Using the Motorola Canopy modem connected via ethernet to PowerBook, I can use the internet and see the modem diagnostics page. Using the Canopy connected to AEBS via ethernet to the WAN port and wireless (802.11) to the PowerBook, I can see the internet but I cannot see the modem diagnostics page. I believe that it has something to do with the way I am setting options in the AEBS (or maybe the PowerBook), but I have not been able to figure it out. Can some-one please help?
    Note: While I am using the Motorola Canopy modem, I don't think that matters, I think that any cable or DSL modem would do the same thing.
    Thank you,
    Greg
    Ti Powerbook G4, iBook G4, MacBook, MacMini Intel, iMac DV, B&W G3   Mac OS X (10.4.8)  

    You question was about a Zyxel modem, but you indicate that you have other equipment...an AirPort Express, Airport Extreme, etc.
    Is the Zyxel "modem" your only modem/router?
    Or, do you have other Apple routers connected to the Zyxel "modem"?
    Changes are, although the Zyxel device may be called a "modem", it is really a gateway....a combination modem and router in one box.
    Can you provide the model number of your "modem"?

  • I can open Windows Live with Ff4 and can 'see' emails but cannot open them. It was fine with Ff3. Is there a plug-in?

    If I right click on the messenger icon on the toll bar it opens windows live in firefox by default. Then the page just hangs. I can see the emails but cannot open them. It works ok if I load in internet explorer browser.

    That format is used primarily to record TV shows, which you are generally not allowed to edit.  So it's unlikely you'll find a plug-in or converter.
    Recapture using Premiere Pro or HDVSplit.  Those files will work.

  • IPhoto can see thumbnails but cannot get full pictures

    My iPhoto library seems to be corrupted.
    I can see all the thumbnails but when I click on some I get a triangular sign with an exclamation point.
    Others work.
    Thinking that perhaps the iPhoto database was corrupted, I attempted to load an older time machine backup (mid July 2014), but Time Machine would not let me select the iPhoto directory. I can select my desktop ( as a test) but not my documents (very upsetting).
    I did successfully restore the iPhoto App.
    I have successfully restored my complete system twice with only minor problems. One was a permissions issue when I restored to a new MBP.
    Anyway in both cases the iPhoto library stayed intact.
    I would deal love to hear any suggestions that anyone might have to offer.
    Thanks
    Barry

    Hey bholtzkener,
    It seems like you may need to rebuild your iPhoto database. This article has some helpful information for you regarding this procedure:
    iPhoto 6 and later: Rebuilding the iPhoto library
    http://support.apple.com/kb/HT2638
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • BTFON - Can see Hotspots but cannot join them

    Previously I've been able to connect to Hotspots without issue on my iPhone, but recently I've been able to see the Hotspots but whenever I try to connect to them using the BT Wi-fi app it never connects.
    Some areas I work in there is very little signal, but the hotspots are a god send.
    I'm using the correct details to log in as they are the same as before when it worked & I'm opted in to Wi-Fi.
    The one thing I can think of that could be the root of the issue is that my HH3 was dropping connection all the time, so I had to switch to an Asus N66U router instead. Does not having a Home Hub connected cause BT Wi-Fi not to work?
    Any help appreciated.
    Solved!
    Go to Solution.

    Not using a Homehub does not effect you being able to use BTWifi provided you are still opted in. Check your status here
    https://www.bt.com/wifi/secure/status.do;jsessionid=TNLTTDvG784K5773JkcgPQk40Rz3LNLQdY2TL2dL7d1ff6hS...
    Are you able to log on to BTWifi without using the BTWifi app? Have you tried uninstalling and reinstalling the app?
    Have a look at this link for some other things to try
    http://bt.custhelp.com/app/answers/detail/a_id/37354/~/bt-wi-fi-app-troubleshooting-for-iphone%2Fipa...

  • Ps touch android 1.7.5, can see folders but cannot up or download from creative cloud

    I can connect to CC and choose a folder but as soon as I choose a file I get "Lost connection, cannot connect to server"

    rec-52 wrote:
    Is Adobe working to fix this bug? When might we anticipate a fix to this bug? Will Adobe notify us in someway when the bug has been fixed? Wouldn't it be a good idea if Adobe posted the information about the existence of this bug on the forum?
    As long as you've set your options to alert you via email when someone posts in a thread like this one, it's usually not an issue, at least in my experience. Adobe's pretty good at fixing issues; they have to pinpoint it first with the help of their users.

  • Airport card can see networks but can't connect all of a sudden

    I have an older MacBook running 10.6.8 (snow leopard) and it's been working fine. All of a sudden, it can see networks, but cannot connect. I get an alert with an exclamation point and "no Internet connection". My iPad can connect just fine; same network, same location as usual, so I know it's not an issue with the network/router (my husband's computer works fine as well). If my airport card went, I wouldn't be able to see any networks at all, right?  Is there anything I can do?  My AppleCare has run out, due to the age of my computer and I don't want to put hundreds into fixing it, either (nor can I afford it). Has anyone had this happen?  Any suggestions?  Thanks!

    Hello sarcastabtch,
    The following article should be helpful in restoring your internet connection via WiFi.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    Allen

  • TS3367 When we facetime others, they can see us, but we can't see them.....suggestions on how to fix this?

    When we facetime others, they can see us, but we can't see them.....suggestions on how to fix this?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • I switched from an iPhone to a Galaxy s4.  Everything seems ok except text messaging with people who have an iPhone.  I can send them a text, they can see it, but I cannot see what they text back.  What can I do please?

    I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging.  I can text, they can see it, but I cannot see their response if they are using an iPhone.  Can you help me with this?  What do I do please?

        Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
    If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC 
    Please keep us posted, and let us know if this resolves your issue!
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Running an iMac 24" with Lion  Facetime will connect with another iMac using SL  I can both see and hear the other person.  They can see me but can't hear me.  I have set the sound panel to what I think is correct.  Any ideas?

    I am running an iMac 24" with Lion.  FaceTime is received with both sound and picture.  Another iMac running SL can see but cannot hear me.  Any ideas?

    if you use some case or screen protector check up on where the mics on the iphone are and that your case / screenprotector and or fingers are not blocking them

Maybe you are looking for

  • DW Procedures to connect to MS ACCESS database located on remote server

    I am confused about the procedures within Dreamweaver CS3 to connect to a MS ACCESS database on a remoter server. I am working through a tutorial book, "Dreamweaver 8 with ASP, Cold Fusion and PHP Training from the Source", but the instructions are u

  • IPod not recognized by PC

    I am having so much troubles with my 20G iPod, when I connect it...the PC do not recognized, either the iPod up dater...appears a message that say that iPod up dater can not munt the iPod. Before installing the new iPod updater everything was fine we

  • Keyboard falls asleep after update to OS X 10.8.2 Help!

    After update to OSX10.8.2 my MacBook Pro Keyboard and trackpad falls asleep after 10-20 seconds. Then it takes 4-5 sec to awake. Usually the first keystrokes are lost. The mouse works perfectly. Anyone else having this problem or has a solution?

  • Unable to check supervision, Apple Configurator

    When I connect the specific two ipads to configurator, configurator says "unable to check supervision". But when connected to other configurators, the two ipads get configured well. So I guess it is a issue with the Mac, not iPad. But I have like 50

  • Standalone windows services as opposed to Domain Member

    Hi I know very little about windows networking, and have a basic question. I have a school network with mostly macs, and a 10.4 server. There is also a windows server on the network that someone else comes in to maintain that supplies all the windows