TS3694 My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears. Tried all the troubleshooting help, but nothing works. Any ideas???
My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???
I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order.
Similar Messages
-
I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help
make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac -
Hi. My Ipod Touch switched off in the gym during exercise (got wet or battery wend down). I tried all the troubleshooting hints but nothing helps. It is not responding, not charging and is completely dead. I tried various charging from different sourches but nothing happens.
Any advice please?If you tried everythng here then it is time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.
iOS: Not responding or does not turn on -
Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.
Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.
-
I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?
Is your printer selected? <br />
Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
See the screenshot below. -
Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions. I need help.
If you haved tried all the fixes and suggestions, there is not much to add. Just in case: did you really try using this tool http://labs.adobe.com/downloads/acrobatcleaner.html to first eliminate all traces of Reader, and then use the full offline installer from http://get.adobe.com/reader/enterprise/?
-
iTunes keeps prompting me to authorize my computer then tells me it's already authorized and I'm stuck in a loop. The troubleshooting options haven't worked. Any suggestions or does anybody have a phone number for iTunes so I can talk to a human being about this?
christinefromsan francisco wrote:
The troubleshooting options haven't worked
you mean this support article ? -
I am still unable to restore my phone.
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
Everytime I try to connect, it gives me a message which reads http://www.apple.com Duplicate IP address: you must login with a different IP address". Help!
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
And reboot the Wi-Fi router. -
All my attempts at getting FCPX 10.1.1 working are failing. I was in mid-edit on a relatively simple job. I am completely locked up with the waiting rotator on continuously. Has anyone had this problem or can offer any advice. I am on a fully spec'd iMac and use a Thunderbolt 8TB drive. My iMac is working correctly with every other app.
There are almost infinite permutations to the type of media and your use of the Mac and FCP X that it is impossible for anyone to guess what you are doing wrong.
Please give detailed info of the media, the project specs and your workflow. -
can anybody help with the issue i'm having please.
Hey there rondulecki,
It sounds like you are unable to sync your device to iTunes because the device could not be recognized properly. I do not know if this is the guide you are referring to, but I would recommend the troubleshooting from the following article to help troubleshoot what is happening named:
iOS: Device detected but not identified properly on iTunes for Windows
http://support.apple.com/kb/ts2818
Thank you for using Apple Support Communities.
All the best,
Sterling -
Does anyone know how to make an appointment with a genius on the net please? Also is there a chat room that can be accessed on the net? My iphone has died and I desperately need to take it in to get fixed/replaced. I can't find anything..............help!!!
Apple Retail Store - Genius Bar
What kind of chat room?
Have you tried basics from the manual? restart, reset, restore -
MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanksIf the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao. -
I cant change payment details. I can't purchase anything. always says 5002 or temp error. Help! Itunes is as good as useless. I've deleted caches reinstalled itunes and followed all the web tips. Nothing works!!! Pls help.
Bump......
Nobody has any ideas?? Apple people?? -
my ipod has a white screen and i cant do nothing i click on the home the volume and the lock botton but nothing work what do i do
Let the battery fully drain. After charging for an hour try:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to computer and try to retore.
- If the screen remains white and you can't trun it off then it is time for an appointment at the Genius Bar of an Apple store. You very likely have a hardware problem.
Maybe you are looking for
-
"Mail" doesn't open all of the way up....
First off, i'd like to express my extreme dissapointment with Apple support line. I was on hold for 10 minutes before being asked what the nature of the problem, after stating that my "Mail" program was not working, she asked for my serial number and
-
I have 2 Iphones, registered under the same AppleID. Mine, and my mom's. I recently (today) did the software udate for her phone, and ever since-she receives every message i send to my girlfriend, and every response that my girlfriend sends to me.
-
My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!
-
Unable to open an unformatted csv in excel
Hi Team, I have the data in the below format and I am unable to get this data into excel for the reason that we have even fields with multiple values which have commas in them (like a server might have multiple NICs). I just wanted to know if there i
-
Hi, How can i introduce a newline character while displaying a string using string functions in a report.. My requirement is, i need to replace a particular character with a newline character in a string using replace function Can anyone help me Than