Turn on audio for video received in an email

How do I turn on audio for video received in an email? My audio works in other situations, just not with an emailed clip.

These documents are opening in a window, correct? Along the top of it, assuming you are on Windows, there should be a bar with a title in it, just like most apps.
It sounds to me as if you are being send PDF files, not Word documents. Why are you sure they are Word documents. IGNORE THE WORD ICON, that would be part of the problem.

Similar Messages

HD PowerShot camera whose audio for video of rock concerts is decent?

Many years ago, I bought a Canon PowerShot SD870 IS Digital ELPH. I loved the camera as it not only took good pictures, but the sound quality of videos I took of live metal and rock concerts was outstanding.
Then, the camera broke after many years of good use.
Since then, I have purchased several new PowerShot cameras only to find that the sound quality of the videos from live shows is awful. The sound is severely distorted by procession instruments (bass and drums).
Can anyone recommend an HD PowerShot camera whose audio for video of rock concerts is decent? I don’t want a dedicated video camera.
Thanks much -- Denis

Many years ago, I bought a Canon PowerShot SD870 IS Digital ELPH. I loved the camera as it not only took good pictures, but the sound quality of videos I took of live metal and rock concerts was outstanding.
Then, the camera broke after many years of good use.
Since then, I have purchased several new PowerShot cameras only to find that the sound quality of the videos from live shows is awful. The sound is severely distorted by procession instruments (bass and drums).
Can anyone recommend an HD PowerShot camera whose audio for video of rock concerts is decent? I don’t want a dedicated video camera.
Thanks much -- Denis

Audio for video

Instead of recording audio for video purposes at 48 KHz, how about recording at 44.1 instead and upsampling afterward? Would it work? Would it have disadvantages?

It may depend on whether you are recording separate audio to be laid onto video or sync sound recorded along with the video. Simplistically 48K is chosen because there is an integral number of audio samples per video frame, 1920 for PAL and 1600 for NTSC interlaced video and, of course, 2000 for film 24fps. So if you want to accurately lock your audio sample rate to video sync then it must be 48K.

Turn off audio on video layer

Just experimenting with grading in photoshop - so far so awsome
Trouble is I often dupe the original video layer to apply effects and this appears to dupe the audio - rendering the final audio totally overblown and distorted. - is there a way to switch it off for a specific layer?

I think that JJMack has answered the question, but based on what I think you are doing, you should be able to Copy, just the video from a muxed (combination of both a Video Stream and an Audio Stream), and not have to deal with the Audio from the Clip. In Premiere Pro, one would Alt+click on the Video part of the Clip, separating (unlinking) it from its Audio. This is a temporary unlinking, and the Streams will be relinked, when you are done. Then, functions, such as Copy, will only affect the Video portion. I feel certain that PS has similar to what Premiere does, though the exact modifier key might differ. This is very useful for other editing tasks, such as creating J, or L Cuts, where the Audio, or Video is edited separately from the other Stream.
Good luck,
Hunt

Turn off display for Video Podcast...?

Howdy,
I use an iPhone 4 with the most recent software...
Is it possible to turn off the display while running a video podcast?
With earlier iPhones it worked fine, but the old method does not work, and I have been unable to find a method that will do this.
Thanks for any help,
A.C.

with the following command running in a commandprompt window you can turn your screen black untill you click or type something.
You can easily transform this in a script which runs every 10minutes in scheduled tasks
%systemroot%\system32\scrnsave.scr /s
GPO scheduled tasks
I've added a link to technet article about GPO and scheduled tasks

NO AUDIO FOR VIDEOS WHEN USING INTERNAL CAMERA

My Iphone 5 stopped recording sound when I switch cameras. Well, there is sound..an intense hissing and if I listen really hard I can make out a whisper of the recorded audio. Also no one can hear me when I use speaker phone during calls.
Music plays fine on speakers.
Videos recorded on normal camera have perfectly clear audio.
There is no water or physical damaged. (checked water damage indicator and I take great care of my phone)
Ive tried factory reset and Turning off my phone.
Can someone please provide me with some insights?!

I am not blocking the microphones. I am well aware where the 3 microphones are located, and the sound isnt low..It's loud hissing feedback.

Baffled - routing audio for videos.

Hello folks, could not deceide the right forum for this, so here it is.
I want to record videos of myself playing guitar, along with a Song playing in iTunes/Guitar Pro (midi program). Now. I want a program/way of recording from my isight the video, but for the audio get the input(my guitar) and what is coming out of my speakers (the song). doing this would stop me from having to record the video, then sync it with the midi backing etc etc - very tedious. I am connecting using a MOTU device, to which my guitar is plugged in, and my speakers are plugged into the MOTU. Anyone have any idea how to do this? I can get a video with the audio just being the guitar, but no luck with both.....
Cheers, sorry if it does not make sense!

Hi,
for the Audio-'Mixing' I would suggest to have alook at Audio HiJack Pro: http://www.rogueamoeba.com/audiohijack/
since it can record from different sources at sametime.
But for the combining with/recording of Video I am at lost.
Stefan

No audio for video files in lightroom 4 ?

i have been importing video files from my canon 7d into both lightroom 3 and lightroom 4 beta. the video works great in both, but there is no audio in 4 beta. Audio works fine in lightroom 3.

Odd. I get audio with mine.
Win 7, .mov file from Canon S90.
Hal

How to turn on audio for imported QT file

Hello,
I imported a QT file into Garage band which contained audio, into the movie track. I am importing a bunch of mp3 songs into other tracks. Earlier when I played the QT file via Garage band, I was able to hear the sound of the QT file, in addition of the mp3... but now, the QT file sound has disapeared!
I must say, that I had to delete the QT fiel out of GBand, and re-imported it. And yes there is sound on the QT file.
just like the tracks have the triangle to adjust the volume level, the "movie track" where the QT file resides, does not have any volume adjustment!
Any idea to turn the sound on on the QT file?
Michel

When you import a movie into GB, the movie's sound track is separated from the picture and appears as its own audio track. That's why the movie track has no volume slider. So if you have no sound track, you can't hear the movie's sound. No idea what could have happened to it.

Codes for audio video receiver class

I am currently writting an audio and video receiver for my project based on AVReceive3, it works but i can only get Video only, everything seems to be normal, i dont see why i am not getting audio. My transmitter is working fine and sending both streams.
If anyone can spot the error or mistake i a making, pleaase let me know as soon as possible.
my email address is [email protected]
public class AudVidReceive extends Frame implements ActionListener,ReceiveStreamListener,SessionListener,ControllerListener
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator alocator;
MediaLocator vlocator,vloct,aloct;
private String ipAddress;
private int portBase;
Button transtop,transtart,recstop,recstart;
Component controlPanel, visualComponent;
//For Receiving Media Stream
String sessions[] = null;
SessionManager mgrs[] = null;
Vector playerWindows = null;
boolean dataReceived = false;
Object dataSync = new Object();
private Processor processor = null;
Player player=null;
Format fmt=null;
private SessionManager rtpMgrs[];
private DataSource dataOutput = null;
DataSource ads=null;
DataSource vds=null;
DataSource source[];
DataSource m=null;
public AudVidReceive()
super("Audio Video Receive");
recstart=new Button("StartReceiving");
//recstop=new Button("Stop Receiving");
add(recstart);
recstart.setBounds(80,250,100,30);
recstart.addActionListener(this);
setLayout(null);
setSize(400,300);
setVisible(true);
//this.sessions=sessions;
public void actionPerformed(ActionEvent e)
Button b=(Button)e.getSource();
String ac=e.getActionCommand();
if(ac.equalsIgnoreCase("StartReceiving"))
boolean flag;
boolean st=initialize();
if(!st)
System.err.println("Failed to Realize the Sessions ");
System.exit(-1);
flag=isDone();
try{
while(!flag)
Thread.sleep(1000);
}catch(Exception e1)
e1.printStackTrace();
//Initialize the Session for Receiving the Incomming Stream
protected boolean initialize() {
try {
InetAddress ipAddr;
SessionAddress localAddr = new SessionAddress();
SessionAddress destAddr;
String sessions[]={"192.168.2.143/42060"};
mgrs = new com.sun.media.rtp.RTPSessionMgr[sessions.length];
playerWindows = new Vector();
SessionLabel session;
// Open the RTP sessions.
for (int i = 0; i < sessions.length; i++) {
// Parse the session addresses.
try {
session = new SessionLabel(sessions);
} catch (IllegalArgumentException e) {
System.err.println("Failed to parse the session address given: " + sessions[i]);
return false;
System.err.println(" - Open RTP session for: addr: " + session.addr + " port: " + session.port + " ttl: " + session.ttl);
mgrs[i] = new com.sun.media.rtp.RTPSessionMgr();
mgrs[i].addSessionListener(this);
mgrs[i].addReceiveStreamListener(this);
ipAddr = InetAddress.getByName(session.addr);
destAddr = new SessionAddress(ipAddr, session.port,
ipAddr, session.port+1);
mgrs[i].initSession(localAddr, getSDES(mgrs[i]), .05, .25);
// You can try out some other buffer size to see
// if you can get better smoothness.
BufferControl bc = (BufferControl)mgrs[i].getControl("javax.media.control.BufferControl");
if (bc != null)
bc.setBufferLength(350);
mgrs[i].startSession(destAddr, session.ttl, null);
} catch (Exception e){
System.err.println("Cannot create the RTP Session: " + e.getMessage());
return false;
// Wait for data to arrive before moving on.
long then = System.currentTimeMillis();
long waitingPeriod = 120000; // wait for a maximum of 30 secs.
try{
synchronized (dataSync)
while (!dataReceived && System.currentTimeMillis() - then < waitingPeriod) {
if (!dataReceived)
System.err.println(" - Waiting for RTP data to arrive...");
dataSync.wait(1000);
}catch (Exception e) {}
if (!dataReceived) {
System.err.println("No RTP data was received.");
close();
return false;
return true;
* Find out the host info.
String cname = null;
private SourceDescription[] getSDES(SessionManager mgr)
SourceDescription[] desclist = new SourceDescription[3];
if (cname == null)
cname = mgr.generateCNAME();
desclist[0] = new
SourceDescription(SourceDescription.SOURCE_DESC_NAME,
System.getProperty("user.name"),
1,
false);
desclist[1] = new
SourceDescription(SourceDescription.SOURCE_DESC_CNAME,
cname,
1,
false);
desclist[2] = new
SourceDescription(SourceDescription.SOURCE_DESC_TOOL,
"AVReceive powered by JMF",
1,
false);
return desclist;
//Check Player window sizing
public boolean isDone() {
return playerWindows.size() == 0;
* Close the players and the session managers.
protected void close()
for (int i = 0; i < playerWindows.size(); i++)
try {
((PlayerWindow)playerWindows.elementAt(i)).close();
} catch (Exception e) {}
playerWindows.removeAllElements();
// close the RTP session.
for (int i = 0; i < mgrs.length; i++) {
if (mgrs[i] != null) {
mgrs[i].closeSession("Closing session from AudVidReceive");
mgrs[i] = null;
//Find the player
PlayerWindow find(Player p) {
for (int i = 0; i < playerWindows.size(); i++) {
PlayerWindow pw = (PlayerWindow)playerWindows.elementAt(i);
if (pw.player == p)
return pw;
return null;
//Find whether the Player is receiving the Stream
PlayerWindow find(ReceiveStream strm) {
for (int i = 0; i < playerWindows.size(); i++) {
PlayerWindow pw = (PlayerWindow)playerWindows.elementAt(i);
if (pw.stream == strm)
return pw;
return null;
* SessionListener.
public synchronized void update(SessionEvent evt) {
if (evt instanceof NewParticipantEvent) {
Participant p = ((NewParticipantEvent)evt).getParticipant();
System.err.println(" - A new participant had just joined: " + p.getCNAME());
* ReceiveStreamListener
public synchronized void update( ReceiveStreamEvent evt) {
SessionManager mgr = (SessionManager)evt.getSource();
Participant participant = evt.getParticipant(); // could be null.
ReceiveStream stream = evt.getReceiveStream(); // could be null.
if (evt instanceof RemotePayloadChangeEvent) {
System.err.println(" - Received an RTP PayloadChangeEvent.");
System.err.println("Sorry, cannot handle payload change.");
System.exit(0);
else if (evt instanceof NewReceiveStreamEvent) {
try {
stream = ((NewReceiveStreamEvent)evt).getReceiveStream();
DataSource ds = stream.getDataSource();
// Find out the formats.
RTPControl ctl = (RTPControl)ds.getControl("javax.media.rtp.RTPControl");
if (ctl != null){
System.err.println(" - Recevied new RTP stream: " + ctl.getFormat());
} else
System.err.println(" - Recevied new RTP stream");
if (participant == null)
System.err.println(" The sender of this stream had yet to be identified.");
else {
System.err.println(" The stream comes from: " + participant.getCNAME());
// create a player by passing datasource to the Media Manager
Player p = javax.media.Manager.createPlayer(ds);
if (p == null)
return;
p.addControllerListener(this);
p.realize();
PlayerWindow pw = new PlayerWindow(p, stream);
playerWindows.addElement(pw);
// Notify intialize() that a new stream had arrived.
synchronized (dataSync) {
dataReceived = true;
dataSync.notifyAll();
} catch (Exception e) {
System.err.println("NewReceiveStreamEvent exception " + e.getMessage());
return;
}//above catch closing if
else if (evt instanceof StreamMappedEvent) {
if (stream != null && stream.getDataSource() != null) {
DataSource ds = stream.getDataSource();
// Find out the formats.
RTPControl ctl = (RTPControl)ds.getControl("javax.media.rtp.RTPControl");
System.err.println(" - The previously unidentified stream ");
if (ctl != null)
System.err.println(" " + ctl.getFormat());
System.err.println(" had now been identified as sent by: " + participant.getCNAME());
else if (evt instanceof ByeEvent) {
System.err.println(" - Got \"bye\" from: " + participant.getCNAME());
PlayerWindow pw = find(stream);
if (pw != null) {
pw.close();
playerWindows.removeElement(pw);
}// end of this method
* ControllerListener for the Players.
public synchronized void controllerUpdate(ControllerEvent ce) {
Player p = (Player)ce.getSourceController();
if (p == null)
return;
// Get this when the internal players are realized.
if (ce instanceof RealizeCompleteEvent) {
PlayerWindow pw = find(p);
if (pw == null) {
// Some strange happened.
System.err.println("Internal error!");
System.exit(-1);
pw.initialize();
pw.setVisible(true);
p.start();
if (ce instanceof ControllerErrorEvent) {
p.removeControllerListener(this);
PlayerWindow pw = find(p);
if (pw != null) {
pw.close();
playerWindows.removeElement(pw);
System.err.println("AVReceive internal error: " + ce);
* A utility class to parse the session addresses.
class SessionLabel {
public String addr = null;
public int port;
public int ttl = 1;
SessionLabel(String session) throws IllegalArgumentException {
int off;
String portStr = null, ttlStr = null;
if (session != null && session.length() > 0) {
while (session.length() > 1 && session.charAt(0) == '/')
session = session.substring(1);
// Now see if there's a addr specified.
off = session.indexOf('/');
if (off == -1) {
if (!session.equals(""))
addr = session;
} else {
addr = session.substring(0, off);
session = session.substring(off + 1);
// Now see if there's a port specified
off = session.indexOf('/');
if (off == -1) {
if (!session.equals(""))
portStr = session;
} else {
portStr = session.substring(0, off);
session = session.substring(off + 1);
// Now see if there's a ttl specified
off = session.indexOf('/');
if (off == -1) {
if (!session.equals(""))
ttlStr = session;
} else {
ttlStr = session.substring(0, off);
if (addr == null)
throw new IllegalArgumentException();
if (portStr != null) {
try {
Integer integer = Integer.valueOf(portStr);
if (integer != null)
port = integer.intValue();
} catch (Throwable t) {
throw new IllegalArgumentException();
} else
throw new IllegalArgumentException();
if (ttlStr != null) {
try {
Integer integer = Integer.valueOf(ttlStr);
if (integer != null)
ttl = integer.intValue();
} catch (Throwable t) {
throw new IllegalArgumentException();
* GUI classes for the Player.
class PlayerWindow extends Frame {
Player player;
ReceiveStream stream;
PlayerWindow(Player p, ReceiveStream strm) {
player = p;
stream = strm;
public void initialize() {
add(new PlayerPanel(player));
public void close() {
player.close();
setVisible(false);
dispose();
public void addNotify() {
super.addNotify();
pack();
* GUI classes for the Player.
class PlayerPanel extends Panel {
Component vc, cc;
PlayerPanel(Player p) {
setLayout(new BorderLayout());
if ((vc = p.getVisualComponent()) != null)
add("Center", vc);
if ((cc = p.getControlPanelComponent()) != null)
add("South", cc);
public Dimension getPreferredSize() {
int w = 0, h = 0;
if (vc != null) {
Dimension size = vc.getPreferredSize();
w = size.width;
h = size.height;
if (cc != null) {
Dimension size = cc.getPreferredSize();
if (w == 0)
w = size.width;
h += size.height;
if (w < 160)
w = 160;
return new Dimension(w, h);
public static void main(String [] args) {
Format fmt = null;
int i = 0;
AudVidReceive at1 = new AudVidReceive();
System.err.println("Start Receiving incoming Streams ");
try {
Thread.currentThread().sleep(60000);
} catch (InterruptedException ie) {
ie.printStackTrace();

I have to use RTP and RTSP for transferring the
audio/video streams in real time.
How I can sen and receive RTP packets.
How can I make the RTP Player.
What is the role of JMF in it.
Please suggest me and provide me the codes if
possible.
Thanks alot
shobhit vermaThere are two ways using which you can send and recieve packets using rtp. One without using the SessionManager and the other with.
1.) Not using the SessionManager makes things easy for you but it offers very little flexibility to you. You can do this by just specifying a medialocator pointing to the specific url
2.) Using the SessionManager is what is usually suggested. This process is more complex. First you have to instantiate a RTPSessionMgr to a SessionManager reference using which you can send and receive streams to and from the network. The process is more involved than this and is suggest you read some tutorials to get a better understanding, than me explaining to you the entire process.
Message was edited by:
qUesT_foR_knOwLeDge

Adobe Audition for Video Editors webinar recording online

Hi everyone,
Last week, Audition sponsored a screencast hosted by Kanen Flowers covering his workflows for editing audio for video projects. The recording of the event is online at http://seminars.adobeconnect.com/p58yg03mkgg/
We had a great turnout, and if people find these valuable, we'll try to schedule more of them addressing different editing topics.
Have a great day,
Durin

I was interested enough to sign up for the real-time webinar. I want my hour back.
Based on its biling, I expected it to deal a fair amount with dialog editing, but it just touched on the subject and most of that was about trying to fix dialog from a Skype connection -- something of little interest to the vast majority of videographers.
The structure was just a ramble; it seemed to me that Kenan did little to prepare. It was more an ad for Kenan and his show than it was useful for videographers trying to learn how to use Audition. But maybe that was just me; YMMV.
I should add that I've watched several other Abobe webinars. Most were good solid useful information. The bar is set fairly high, which is probably why I was dissapointed in this one.

Lumia 920 WP8.1 upgrade issues: no audio on video ...

Hi,
I installed the Cyan/WP8.1 update on my Lumia 920 when it was made available to US AT&T customers last week.
After installing the update I've lost the ability to record audio with my video recordings and Cortana can't hear anything I say.
Details:
OS Version: 8.10.12393.890
Firmware revision number: 3051.50009.1425.2001
Radio software version: 1.0.202184.3
Chip SOC version: 8960
Audio for phone calls works fine. Audio for video recordings was working right up until I upgraded.
I've performed a hard reset and used Nokia's Software Recovery Tool. Neither restored audio functions.
Does anyone have any advice?
Thanks,
Mark

hi mate if u have used NSRT and performed a hard reset there is probably nothnig u can do except to take your phone to Nokia Care or AT&T now. sorry mate.

N95,GPS, Flash in night for video capture

please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???

15-Jul-200705:21 PM
probit wrote:
please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???
1) The N95 currently does NOT offer the facility to use the flash as a light for video capture.
2) I don't understand your question
3) Your GPS should work in Iran, although there may be an issue with the US (to which all GPS satellites belong to) not allowing Iran to use the satellites - not too sure about this bit.
You will need to download Iranian maps (if available) for the N95 - you can find the download page for Nokia Maps here :
http://europe.nokia.com/A4353385
Also if you follow the link below it'll give you more information on how to get your GPS working :
/discussions/board/message?board.id=connectivity&message.id=8921#M8921
Regards,
Edward

DO i need some extra hardware interface for receving both Audio and video

hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
     config= new Config();
     GridBagLayout gridBagLayout= new GridBagLayout();
     GridBagConstraints gbc;
     JPanel p= new JPanel();
     p.setLayout( gridBagLayout);
     JPanel localPanel= createLocalPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.gridwidth= 2;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
     p.add( localPanel);
     JPanel targetPanel= createTargetPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 1;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
     JPanel mediaPanel= createMediaPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 2;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
     update.setEnabled( false);
     rtcp.addActionListener( this);
     update.addActionListener( this);
     buttonPanel.add( rtcp);
     buttonPanel.add( update);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 3;
gbc.gridwidth= 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
     p.add( buttonPanel);
getContentPane().add( p);
     list.addMouseListener( this);
     addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "Media Locator:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_media_file= new JTextField( 35);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
     p.add( tf_media_file);
     tf_media_file.setText( config.media_locator);
     cb_loop= new JCheckBox( "loop");
     startXmit= new JButton( "Start Transmission");
     startXmit.setEnabled( true);
     startXmit.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 2;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
     p.add( cb_loop);
     cb_loop.setSelected( true);
     cb_loop.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
     p.add( startXmit);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
     p.setBorder( titledBorder);
     return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     targets= new Vector();
     for( int i= 0; i < config.targets.size(); i++) {
     targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
     list.addKeyListener( this);
     list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
     p.add( scrollPane);
JPanel p1= new JPanel();
     p1.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_address= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
     p1.add( tf_remote_address);
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
     p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
     p2.add( addTarget);
     p2.add( removeTarget);
     addTarget.addActionListener( this);
     removeTarget.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.gridwidth= 2;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 20,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
     p1.add( p2);
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
     p.add( p1);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
     p.setBorder( titledBorder);
     return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     JTextField tf_local_host= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
     p.add( tf_local_host);
     try {
String host= InetAddress.getLocalHost().getHostAddress();
     tf_local_host.setText( host);
     } catch( UnknownHostException e) {
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
     p.add( tf_data_port);
     tf_data_port.setText( config.local_data_port);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
     p.setBorder( titledBorder);
     return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
     if( source == addTarget) {
     String ip= tf_remote_address.getText().trim();
     String port= tf_remote_data_port.getText().trim();
     String localPort= tf_data_port.getText().trim();
     addTargetToList( localPort, ip, port);
     if( avTransmitter != null) {
     avTransmitter.addTarget( ip, port);
     } else if( source == removeTarget) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          if( avTransmitter != null) {
     avTransmitter.removeTarget( target.ip, target.port);
          targets.removeElement( target);
          listModel.setData( targets);
     } else if( source == startXmit) {
     if( startXmit.getLabel().equals( "Start Transmission")) {
     int data_port= new Integer( tf_data_port.getText()).intValue();
          avTransmitter= new AVTransmitter( this, data_port);
     avTransmitter.start( tf_media_file.getText().trim(), targets);
          avTransmitter.setLooping( cb_loop.isSelected());
     startXmit.setLabel( "Stop Transmission");
     } else if( startXmit.getLabel().equals( "Stop Transmission")) {
          avTransmitter.stop();
          avTransmitter= null;
          removeNonBaseTargets();
          listModel.setData( targets);
     startXmit.setLabel( "Start Transmission");
     } else if( source == rtcp) {
     if( rtcpViewer == null) {
     rtcpViewer= new RTCPViewer();
     } else {
          rtcpViewer.setVisible( true);
          rtcpViewer.toFront();
     } else if( source == cb_loop) {
     if( avTransmitter != null) {
          avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
     String localPort= tf_data_port.getText().trim();
     for( int i= targets.size(); i > 0;) {
     Target target= (Target) targets.elementAt( i - 1);
     if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
     i--;
public void addTargetToList( String localPort,
                         String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
                              port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
     if( rtcpViewer != null) {
     rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
     config.local_data_port= tf_data_port.getText().trim();
     config.targets= new Vector();
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( config.local_data_port)) {
          config.addTarget( target.ip, target.port);
     config.media_locator= tf_media_file.getText().trim();
     config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          tf_remote_address.setText( target.ip);
          tf_remote_data_port.setText( target.port);
     int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
     this.options= options;
public int getSize() {
     int size;
     if( options == null) {
     size= 0;
     } else {
     size= options.size();
     return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
     Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
     } else {
     name= null;
     return name;
public void setData( Vector data) {
     options= data;
     fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
               TargetListModel listModel, Vector targets) {
     this.localPort= localPort;
     this.ip= ip;
     this.port= port;
     this.listModel= listModel;
     this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
     if( !targetExists( localPort, ip, port)) {
     targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
     boolean exists= false;
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( localPort)
     && target.ip.equals( ip)
          && target.port.equals( port)) {
          exists= true;
     break;
     return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
     this.tx= tx;
     local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
     String result;
     locator= new MediaLocator( filename);
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null) {
     return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter( targets);
     if (result != null) {
     processor.close();
     processor = null;
     return result;
     // Start the transmission
     processor.start();
     return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     localPorts = new int[ pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     // for (int i = 0; i < 1; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
          port = local_data_port + 2*i;
          localPorts[ i]= port;
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addReceiveStreamListener(this);
          rtpMgrs[i].addRemoteListener(this);
     for( int k= 0; k < targets.size(); k++) {
          Target target= (Target) targets.elementAt( k);
          int targetPort= new Integer( target.port).intValue();
          addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          e.printStackTrace();
          return e.getMessage();
     return null;
public void addTarget( String ip, String port) {
     for (int i= 0; i < rtpMgrs.length; i++) {
     int targetPort= new Integer( port).intValue();
     addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     mgr.addTarget( addr);
     tx.addTargetToList( localPort + "", ip, port + "");
     } catch( Exception e) {
     e.printStackTrace();
public void removeTarget( String ip, String port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
     } catch( Exception e) {
     e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
     System.out.println( ce);
     if( ce instanceof DurationUpdateEvent) {
     Time duration= ((DurationUpdateEvent) ce).getDuration();
     System.out.println( "duration: " + duration.getSeconds());
     } else if( ce instanceof EndOfMediaEvent) {
     System.out.println( "END OF MEDIA - looping=" + looping);
     if( looping) {
     processor.setMediaTime( new Time( 0));
          processor.start();
public void setLooping( boolean flag) {
     looping= flag;
public void update( ReceiveStreamEvent event) {
     String timestamp= getTimestamp();
     StringBuffer sb= new StringBuffer();
     if( event instanceof InactiveReceiveStreamEvent) {
     sb.append( timestamp + " Inactive Receive Stream");
     } else if( event instanceof ByeEvent) {
     sb.append( timestamp + " Bye");
     } else {
     System.out.println( "ReceiveStreamEvent: "+ event);
     tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
     String timestamp= getTimestamp();
     if( event instanceof ReceiverReportEvent) {
     ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
     StringBuffer sb= new StringBuffer();
     sb.append( timestamp + " RR");
     if( rr != null) {
          Participant participant= rr.getParticipant();
          if( participant != null) {
          sb.append( " from " + participant.getCNAME());
          sb.append( " ssrc=" + rr.getSSRC());
          } else {
          sb.append( " ssrc=" + rr.getSSRC());
          tx.rtcpReport( sb.toString());
     } else {
     System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
     String timestamp;
     Calendar calendar= Calendar.getInstance();
     int hour= calendar.get( Calendar.HOUR_OF_DAY);
     String hourStr= formatTime( hour);
     int minute= calendar.get( Calendar.MINUTE);
     String minuteStr= formatTime( minute);
     int second= calendar.get( Calendar.SECOND);
     String secondStr= formatTime( second);
     timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
     return timestamp;
private String formatTime( int time) {
     String timeStr;
     if( time < 10) {
     timeStr= "0" + time;
     } else {
     timeStr= "" + time;
     return timeStr;
* Stops the transmission if already started
public void stop() {
     synchronized (this) {
     if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTargets( "Session ended.");
          rtpMgrs[ i].dispose();
public String createProcessor() {
     if (locator == null) {
     return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
     ds = javax.media.Manager.createDataSource(locator);
     } catch (Exception e) {
     return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
     processor = javax.media.Manager.createProcessor(ds);
     processor.addControllerListener( this);
     } catch (NoProcessorException npe) {
     return "Couldn't create processor";
     } catch (IOException ioe) {
     return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
     return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
     return "Couldn't find tracks in processor";
     // Set the output content descriptor to RAW_RTP
     // This will limit the supported formats reported from
     // Track.getSupportedFormats to only valid RTP formats.
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     Format supported[];
     Format chosen;
     boolean atLeastOneTrack = false;
     // Program the tracks.
     for (int i = 0; i < tracks.length; i++) {
     Format format = tracks[i].getFormat();
     if (tracks[i].isEnabled()) {
          supported = tracks[i].getSupportedFormats();
          // We've set the output content to the RAW_RTP.
          // So all the supported formats should work with RTP.
          // We'll just pick the first one.
          if (supported.length > 0) {
          if (supported[0] instanceof VideoFormat) {
               // For video formats, we should double check the
               // sizes since not all formats work in all sizes.
               chosen = checkForVideoSizes(tracks[i].getFormat(),
                                   supported[0]);
          } else
               chosen = supported[0];
          tracks[i].setFormat(chosen);
          System.err.println("Track " + i + " is set to transmit as:");
          System.err.println(" " + chosen);
          atLeastOneTrack = true;
          } else
          tracks[i].setEnabled(false);
     } else
          tracks[i].setEnabled(false);
     if (!atLeastOneTrack)
     return "Couldn't set any of the tracks to a valid RTP format";
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // audio frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
     int width, height;
     Dimension size = ((VideoFormat)original).getSize();
     Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
     Format h263Fmt = new Format(VideoFormat.H263_RTP);
     if (supported.matches(jpegFmt)) {
     // For JPEG, make sure width and height are divisible by 8.
     width = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
     height = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
     } else if (supported.matches(h263Fmt)) {
     // For H.263, we only support some specific sizes.
     if (size.width < 128) {
          width = 128;
          height = 96;
     } else if (size.width < 176) {
          width = 176;
          height = 144;
     } else {
          width = 352;
          height = 288;
     } else {
     // We don't know this particular format. We'll just
     // leave it alone then.
     return supported;
     return (new VideoFormat(null,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    null,
                    Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realiz

I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works

Embedding video and audio for internet flipbook

Dear All,
first of all, sorry if it's been asked before but I could not find direct answer.
My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
Many thanks for your opinions on the issue.
Best wishes,
Michal Kornacki

I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

Turn on audio for video received in an email

Similar Messages

Maybe you are looking for