Tutorial How to Create a Driver

Anyone knows where I can find a tutorial about how to create a driver and how to deploy in sensor edge ?
Thanks.

For a start, have a look here:
http://www.oracle.com/technology/products/sensor_edge_server/Oracle_Sensor_Edge_Server_Guide.pdf Chapter 3
http://www.oracle.com/technology/products/sensor_edge_server/sample_code.html
There´s also a beta developer´s guide for 10.1.3. Send me a mail for that...

Similar Messages

Tutorial - how to create a sketch of a lovely dragon figure

Hi, I have seen a tutorial/inspiration video earlier when somebody (I think a Swedish girl) showed how to create a sketch of a lovely dragon figure. Can somebody help me find that video? It was part of the Create Now world tour (if I am right). THANKS!

The way I do it is rather simple.
1.       Copy the local RoboHelp project to a new location.
2.       Remove the link to source control. (See http://www.robowizard.com/RoboWizard/MonthlyScry/102004.htm on how to do this without opening RoboHelp. Please follow these instructions.)
3.       Open the RoboHelp project and add it to source control as a new project.
By creating a copy of the entire project directory, ALL the content is retained.
Greet,
Willam

How to create Mapped drive

Hi all,
I have to create an Mapped drive so that i will download my file into the application server directly by giving the path
Please tell me how to create an mapped drive
Regards
Ajay

Try using FM 'F4_FILENAME_SERVER'

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to create CVI drivers from existing LabView HP816x.fp

I downloaded an instrument driver from the www.agilent.com; Instructions are provided to convert drivers for LabView from the provided HP816x.fp, however, I need to create them for LabWindows CVI.

If you downloaded Agilent 816x VXI Plug&Play Driver, you can use it in CVI immediately. You don't need conver anything for CVI. fp file is part of CVI driver.
In project window select menu item Instrument>>Load. Load the hp816x.fp. Add #include to your C code and you can use all function from driver.
Help about converting fp for labview describes how easy create LabVIEW driver. This convertion make llb file with VIs for every function from Fp panel. These VIs call functions from hp861x_32.dll. If you are using CVI you don't need do it. This help is only for LabVIEW users.
Zdenek

How to create a database for sample code from Tutorial/Book?

I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
I'm feeling overwhelmed with these links describing how to create a database:
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
[http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
(1) What is the command to list the existing databases?
(2) What is the command to delete an existing database?
(3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
(4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
(5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
(6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
Thanks
Siegfried
Edited by: user8816970 on Sep 26, 2012 12:01 PM
Edited by: user8816970 on Sep 26, 2012 12:18 PM

user8816970 wrote:
Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
Thanks!
Siegfried
>Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
above does NOT use SQL*Net to connect to the instance
>
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
>
Thanks!
Siegfrieda database in SQL Server is same as schema/user in Oracle

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

How to create a connection pooling in Netbeans 6.0 using the oracle driver

hi all,
I am using Netbeans 6.0. Apache Tomcat 6.0.14 server, oracle 9i.
I tried to create a connection pooling using tomcat web server.
I have included the following code in context.xml and web.xml.
CONTEXT.XML:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/network1">
<Resource name="jdbc/myoracle"
auth="Container"
type="javax.sql.DataSource"
username="scott"
password="tiger"
factory="BasicDataSourceFactory"
driverClassName="oracle.jdbc.OracleDriver"
url="jdbc:odbc:thin:@127.0.0.1:1521:mydb"
maxActive="20"
maxIdle="10"
maxwait="-1"/>
</Context>
WEB.XML:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/myoracle</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
After that i have included the following JDBC driver's jar files in the $Catalina_Home/lib folder.
classes 111.jar,
classes 111_g.jar
classes12.jar
classes 12_g.jar
classes12dms.jar
classes12dms_g.jar
nls_charset11.jar
nls_charset12.jar
ocrs12.jar
ojdbc14.jar
ojdbc14_g.jar
Then i stop the tomcat web server and start it again.
In jsp page i have included the following code:
Context ctx=new InitialContext();
Context envctx=(Context)ctx.lookup("java:comp:env");
DataSource ds=(DataSource)envctx.lookup("jdbc/myoracle");
Connection con=ds.getConnection(); ----->(In this line an error occured that Connection class cannot be found.)
please help me how to create a connection pooling and rectify the error in conneciton.
Thanks in advance

Please refer
http://www.netbeans.org/kb/60/web/customer-book.html

How to create up-to-date Recovery Drive and Recovery Partition on Windows 8.1 U1.

I am running 8.1 and exploring the recovery options.
I'm periodically creating recovery images, etc. but would like to do better than that.
I'd like to know how to:
Create an updated Recovery Partition that will restore to a Recovery Image (WIM) that I choose.
Modify / Create a Recovery Drive that includes a system image
of my choice, as opposed to an image created by the manufacturer / supplier (and the extra work that that implies). If I can create an up to date partition and mark it as such, then I'm clearly done. Should I not be able to sensibly
make my own partition, how do I create this on a USB recovery drive? (The built in interface has a Boolean option, use hard drive recovery partition OR use nothing. This would be solved if it
also had an option to use current recovery image. I'm happy to write simple code to make this happen if that's what it takes.)
Put another way. I can make a recovery image at will, how do I create a recovery partition and recovery drive to match?
I'm no expert on the ins and outs of Windows 8.1 recovery, if this is already covered elsewhere, I'd appreciate a link.

I have documented an unsupported process for creating an automated recovery for use in a task sequence
here. However, if I read your post correctly you are suggesting being able to do this from USB media. The method for creating the recovery partition is simple. It is simply a partition containing a folder called RecoveryImage with your install.wim
inside. Reagentc is the tool that will actually tell Windows where that recovery is. While I don't personally have a use for what your suggesting, I may give it a shot just to see if it can be done. I suspect it will work.
Here are the links that got me started:
ReagentC:
http://technet.microsoft.com/en-us/library/dd799242(v=WS.10).aspx
Creating Push Button Reset:
http://technet.microsoft.com/en-us/library/hh824917.aspx
Good Luck!
bill
Regards, Bill Moore @BMooreAtDell

How to create and hide a drive using java?

I want to ask how to create a temporary drive/ or a drive by allocating some space of existing drives(eg allocating some space of C: Drive such as 5mb for storing files on the new drive that has been created) and then i want to hide that drive .So Please can anyone Explain me how to do that.

Iam saying to all of you iam not blaming to anyone even java. And my harddisk is not currepted or damage by using that. My harddisk is working properly. But i don't know why all of you think that i am blamming to someone but iam asking some question which need to be answered.
I am clearing all of you i am a student and iam creating an project in java for that i need this. I also want to add File/Folder lock on that project. This technique i have seen in folder lock 6 software that they use hidden drive to store files. Thats why iam asking that how to apply this technique using java.
And plz plz read this carefully and answer me to solve my problem.

Tutorial Announcement .:: How to Create a Dynamic RSS Feeds ::.

.:: How to Create a Dynamic RSS Feeds ::.
Using Adobe Dreamweaver 8 and InterAKT Rss Reader Writer Extension.
Hello everyone...
RSS feeds are very useful within sites, as they allow integrating for you website content in an automatic manner. Just share the source for the RSS feed, and when the original content changes, it will reflect in the content you share with any one who subscribed in this feeds on your site.
In this tutorial i`ll help you integrate a RSS feed into one of your pages. This will display the content of your website to feeds subscribers with up to date content.
The main purpose of this tutorial is to create a page that allows visitors subscribe to the RSS Feed that they want to see from your website content, or even enter their own in a text box by searching through feeds. also you can define feeds categories if your website is online store, merchant etc...
:: Online Demo ::
:: Go to tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

Hey Waleed,
thanks again for this great stuff -- and thanks for removing the login protection :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How to create an OS X boot drive?

Hi there!
So I'm buying a new 13" MacBook Pro 2.5 GHz in December. A year from now, I plan on installing an Intel 520 120GB SSD, so I don't void the warranty early! I have a Time Capsule, so after I install it, I can just "Restore from Time Machine backup". But I will need to create a boot drive.
Can someone tell me how to create the external boot drive (preferably without using third-party software) and boot from it. And I would then like to know how to get the information back onto the SSD. Any response from someone who has tried this before is appreciated.
(Note: I can't use the Mountain Lion installer from the Mac App Store, because the MacBook Pro comes shipped with Mountain Lion.
Thanks again,
Solid-State Me

A year from now, I plan on installing an Intel 520 120GB SSD, so I don't void the warranty early!
Upgrading your Hard Drive is an authorized procedure and would not void your warranty. On another note, I would highly recommend a larger SSD, especially if you're waiting a year since prices are constantly dropping.

How to create an handle for Miniport driver Ioctl interface?

Hi All,
I am trying to create an handle for my miniport driver Ioctl interface, but it showing the following error while opening the handle with CreateFile API.
"you are requesting IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMTYPE,
which has been deprecated. Use IOCTL_HAL_GET_DEVICE_INFO::SPI_GETPLATFORMNAME
instead"
Can anyone suggest on how to create the handle for Miniport Ioctl interface?
Thank you,
Sagar

Hi,
I have seen this error only in GUI based apps. Maybe you are pointing to the wrong error.
Check if CreateFile returns INVALID_HANDLE_VALUE. API return value should give you more information.
Regards,
Balaji.

Tutorial on how to create an Ajax-enabled JSF component in Creator?

Is there a tutorial on how to create (not use/import existing) an Ajax-enabled JSF component using Creator 2? I read somewhere that it was done during a presentation in 3 minutes! Now that I really want to see ;-
thanks,
-nikita

As far as I remeber, Edwin Goei's examples are the
closest thing to the info you are looking. He has an
example component, but don't remember if they're
AJAX enabled. Check it on
http://wiki.java.net/bin/view/Javatools/CustomCompone
tLibraries.
Best regards
Antonio.Thanks for the plug. I've been meaning to update that article. Writing an AJAX component is similar to writing other kinds of components but the developer uses AJAX techniques. The latest version of the popup calendar which is checked into the bpcatalog project of java.net uses Dojo which also has some support for AJAX. I haven't yet had time to update the article yet, unfortunately.
-Edwin
http://blogs.sun.com/edwingo/

Tutorial How to Create a Driver

Similar Messages

Maybe you are looking for