Two info provider in one query

Hi ALL,
i am currently looking at two info providers from where data needs to be pulled, but i am not able to get two info providers in one report while using the query designer.
is this a restriction. can i have more than one info provider in one report?
what would be the procedure to get two inf providers in one report
plz help....
Regards
Arvind Kumar

Hi,
You can create a report through query designer only on single InfoProvider(either Multiprovider, InfoCube, InfoSet, DSO,Master Data Object).
If you need to get data from more than 1 info provider you have create a Multiprovider which will include the relevant info providers, and then create report on that Multiprovider.
Hope it helps!!
Thanks,
Lavanya.

Similar Messages

Info-objects of an Info-provider under one Transport request

Hi All,
I am in the process of transporting the Objects from development to QA environment,
As a first step in the transport process, i need to transport the info-objects before transporting other info-providers, transformations etc,
i have several info-providers like BBP_PO, SC, SCA etc, which inturn has more than 100 info-objects that needs to be put under seperate transports.
Say i have info-provider ZBBP_SCA which has 50 info-objects, i need to put those 50 Info-objects in one transport request and then info-provider ZBBP_SCA in another transport request and then its transformations etc.
Can anyone tell me the steps of only collecting the necessary info-objects of ZBBP_SCA alone to be put under one transport.
I tried to do that, but it is collecting all the info-objects, info-areas related to ZBBP_SCA, instead of collecting only necessary objects of ZBBP_SCA.
I will assign points for sure
Can anyone help
Thanks in advance
Pooja

Hi pooja,
So your intention is not to include anything other than target in second request.
For this right click over the object from where you dont intend to transport and say donot transport any below in transport connection.
The reason for target also showing the info objects and so on is that they are all necessary to form this cube definition.
Anhyhow, as you have ensured to collect them seperately go ahead with the approach mentioned above.
Naveen.A

How can i write two ?DDL in one query

how can i write two ?DDL statment in one query?

Issuing two DDL statements requires two edxecutions. Getting around it is possible by creating a procedure that issues the two DDL statements. But they would still have to be issues one at a time, but you would only have to write one statement to invoke it.

Two different results using one query

Hi Friends
Oracle version that I am using is : Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
I have a scenario where one account can be related to two customers. Hence, in table have many rows for one account. Here’s the sample data:
Account_ID | product_code | cust_id | relationship_code | entity_code
1111 | ABC | 1234 | SOL | CUST
1111 | ABC | 2222 | ZZZ | LINK
1111 | ABC | 4455 | ABC | LINK
2222 | ABC | 7890 | SOL | CUST
2222 | ABC | 5678 | ZZZ | LINK
3333 | JFK | 5878 | TST | CUST
3333 | JFK | 3254 | PRI | CUST
3333 | JFK | 3299 | PRI | CUST
4444 | JFK | 2535 | SOL | CUST
4444 | JFK | 4565 | SOL | CUST
5555 | DEF | 6666 | PRI | CUST
5555 | DEF | 6667 | TST | CUST
5555 | DEF | 9667 | TST | CUSTIn this scenario, I need two outputs differently:
Output 1: When an account has relationship_code = ‘SOL’ then take the least cust_id
1111 | ABC | 1234 | SOL | CUST
2222 | ABC | 5678 | ZZZ | LINK
4444 | JFK | 2535 | SOL | CUST Output 2: else take the highest cust_id
3333 | JFK | 5878 | TST | CUST
5555 | DEF | 9667 | TST | CUSTHow can I get this result using one query?

Not sure what you mean. Works OK:
SQL> with t as (
2             select 1111 account_ID,'ABC' product_code,1234 cust_id,'SOL' relationship_code,'CUST' entity_code from dual union all
3             select 1111,'ABC',2222,'ZZZ','LINK' from dual union all
4             select 1111,'ABC',4455,'ABC','LINK' from dual union all
5             select 2222,'ABC',7890,'SOL','CUST' from dual union all
6             select 2222,'ABC',5678,'ZZZ','LINK' from dual union all
7             select 3333,'JFK',5878,'TST','CUST' from dual union all
8             select 3333,'JFK',3254,'PRI','CUST' from dual union all
9             select 3333,'JFK',3299,'PRI','CUST' from dual union all
10             select 4444,'JFK',2535,'SOL','CUST' from dual union all
11             select 4444,'JFK',4565,'SOL','CUST' from dual union all
12             select 5555,'DEF',6666,'PRI','CUST' from dual union all
13             select 5555,'DEF',6667,'TST','CUST' from dual union all
14             select 5555,'DEF',9667,'TST','CUST' from dual union all
15             select 6666,'XYZ',8877,'SOL','CUST' from dual
16            )
17 select account_ID,
18          product_code,
19          cust_id,
20          relationship_code,
21          entity_code
22    from (
23           select account_ID,
24                   product_code,
25                   cust_id,
26                   relationship_code,
27                   entity_code,
28                   case max(case relationship_code when 'SOL' then 1 else 0 end) over(partition by account_ID)
29                     when 1 then dense_rank() over(partition by account_ID order by cust_id)
30                     else dense_rank() over(partition by account_ID order by cust_id desc)
31                   end rnk
32             from t
33          )
34    where rnk = 1
35 /
ACCOUNT_ID PRO    CUST_ID REL ENTI
      1111 ABC       1234 SOL CUST
      2222 ABC       5678 ZZZ LINK
      3333 JFK       5878 TST CUST
      4444 JFK       2535 SOL CUST
      5555 DEF       9667 TST CUST
      6666 XYZ       8877 SOL CUST
6 rows selected.
SQL> SY.

I need two query in one report (two detail section in one query)

Hi master sorry for again distribute
Sir I need two query in one report
Because I need two detail section in my one report
Such as
Master
Vno=9088989
Detail          1
=
=
==
=
Total                     99999
Detail          2
=
=
==
=
Total                     33333
Sir how I get this type of report
Please give me idea
Thanking you
Aamir

I want to see the report as follow.
d_name: CPU-1
date: -----------
Software installed:
sw_id, software, version, serial_no, sw_type
(list of softwares attached, can be more then one)
Hardware attached:
hw_id, hardware, specification (same like software list, it will contain hardware list attached to specific device),
Please if you can help me that how will i make a query for this.
Thanks and Regards
Maz

Adding values from two different queries in one query

Hi,
I have developed a web template by combining 3 queries ,which were created from the same MultiProvider.These queries are having many different selections .Now I need to get the addition of values from these 2 queries into third query.
Is there any way to combine the selections from these queries into one instead of recreating them again.I tried to use global strucuture but not successful.
Kindly let me know is there any workaround for this.
Thanks & Regards,
Raja

Hi ,
You can do it by excel formula.
sheet 1 --> 1st query
sheet2 -->2nd query
sheet3--> put calculations accroding to your requirement based on sheet1 & sheet2 into sheet3.
Regards
Pcrao.

Urgent:how to add two table regions to one query region

hello
In my page a serach region is there and for that region i need to add two tables and two are based on two different view objects.how can i implemnet this thing please let me know.
advance thanks

Hi Wei Fang,
You can try by creating a 2 line template (1 Template, 2 linetype) under a loop note.
So your smartform tree structure will be shown like this:
LOOP
TEMPLATE1.
On the LOOP part, pass the internal table of your data to the working areas.
On the template put all the data of the summary on your first linetype, and put
the detail data on your second linetype.
Good luck and hopefully this will solve the problem
Edited by: Prawira Fadjar on Oct 22, 2008 10:04 AM

How to combine two Info provider data matained at different line items?

Hello Friends,
I have a requirement in which they want to combine the invoice line item data with the GL line item data , in which both are maintained at different line items.......
For e.g:
DSo 1:
Invoice no                Inv line item         Net price
5100000674            10                         300
5100000674            20                         400
5100000674            30                         200
5100000674            40                         100
DSO2:
Acc Doc no            Line item            GL account    Invoice number            amount
9480000000               1                      21110000         5100000674          100
9480000000               2                      31110000         5100000674          200
I tried Infoset, but multiple lines are generating..... as both the line items are maintained at different line items..... Please help me with some ideas and suggestions.......
Thanks for your time..............................................................................

Hi,
You should maintain the InfoObejcts (Charecteristcis) in both DSO's other wise it will disiplay # in reports.
1. While loading the data to DSO's use LOOKUPs in transformations and load teh full fledged data to DSO-2, (in sequence if it will come in second place.)
2. Check with InfoSet Innrr/Outer Joins option.
Else use FM based on both DSO's and cretae DataSourcea nd load the data to another DSO/Cube and build report on that.
Thanks
Reddy

How to create structure at info provider areainquery designer

hi all,
i want create structure at info provider area in query designer.can any one help me how to do that
thanks
Vamshi D Krishna

Hi,
Go to columns. Right click and click on New structure.
Hope this helps.
thanks,
rahul

How to find the activity of the Info cubes or any other Info Provider

Hello everyone,
Is there anyway to find out the last activity date of the info cube or any other info provider?
One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
I also need the Procedure to know the activity of the queries also?
Hope to get an answer soon..!
Thanks in advance..!
Deepak

Hi,
Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
I hoep it will help.
Thanks,
S

Query for Info Provider

How to create query for infoprovider ? I have selection criteria, calculation and result screen for queries taken from one reference query. I am new to this part so dont know which transaction we will use to create query. Is it APO part or BI/BW part ?

I have to create queries for info provider. I have one reference query. I have to create similar selection screen as that of reference query for new query. Calculation which needs to be included in query is provided also result screen for query is given.
how to create query in APO using above input? Which transaction do we use to create query ?
I heard about BEx query analyzer which is there in BI for query creation . Is similar BEx functionality is available in APO ? If yes , what is t-code used for that? I know one tcode - RSRT with which I can see existing reference query selection? Is there similar tcode for query creation also in APO?

Update SAME column name in two tables from ONE query

Dear All Seniors
Please tell me is it possible to update a same column name in two tables.
I have two tables in same schema
(1)table name
pem.igp_parent
column name
igp_no.
igp_type
(2)table name
pem.igp_child
column name
igp_no.
igp_type
i want to update igp_no column in one query please tell me how it would be possible.
thanks
yassen

You want to update the data from what to what? Where is the new data coming from?
If you are trying to put the same data in two different tables, that strongly implies that you have a normalization problem that needs to be addressed.
Why do you want a single query rather than updating each table in turn? Can you join the two target tables to produce a key-preserved view?
Justin

Inconsistent Query Result in SEM-BCS using Virtual Info Provider

We have just upgraded to BW 7.0 and SEM-BCS 6.0. When we run an existing 3.5 BW query for BCS through the Virtual Info Provider against the basic consolidation cube, we are getting inconsistent results. Sometimes we get the correct result, and other times our results are not rolling up correctly causing an out of balance on our balance sheet query. We did not make any hierarchy changes between the query executions. Has anyone else experienced this? We cannot see the cause of the inconsistency. Everything looks good when running through RSRT DEBUG. Any help on pushing us in the right direction to solve this would be appreciated.
Thanks,
Rob

Hi Rob,
Could you please let me know how you have resolved this issue? Thanks.
Regards,
Ashok

One query two different Group By

In My parameter two option one and two.
if i select one, need to come this group by:-
GROUP BY
Name1,
Name2,
Country,
MCC || '/' | MNC
One Output:
Name1 - Name2 - Country - PNR
if i select two, need to come this group by
GROUP BY
Name1,
Country,
MCC || '/' | MNC
two output :
Name1 - Country - PNR
I have only one sql query But i have two different group by
Please advise me, m not using subreport option.
whether any formulas or any other options for group by.

Try inserting the groups statically that are common for both the parameaters like this
GROUP BY
Name1,
Country,
MCC || '/' | MNC
and now create a formula like this
whilereadingrecords;
if =1 then
{Name2 field}
else
Now insert one more group using this formula and move the group to second level by using group options.
Hope this helps!
Raghavendra

Make one query of two queries?

I have these two quries, how can I at the best way get the same result in one query?
--Querie 1
SELECT 'm' || Year_Month As Month,
Sum(NET_SALES) As "Net Sales"
FROM tlbInfo
WHERE Year_Month Between '200709' And '200801'
And record_type IN ('A','X')
Group by Year_Month
Order by Year_Month
--Querie 2
SELECT 'm' || Year_Month As Month,
Sum(STANDARD_MANUF_COST)/Sum(Case When SALES_QUANTITY <> '0' Then SALES_QUANTITY End) As "Cost",
to_char(100*((sum(NET_SALES)-sum(STANDARD_MANUF_COST))/sum(NET_SALES)) || '%') As "Margin"
FROM tlbInfo
WHERE Year_Month Between '200709' And '200801'
And record_type NOT IN ('A', 'X')
And Net_Sales >0
Group by Year_Month
Order by Year_Month

why did you change the 1st query? now you're further from getting the correct answer (not to mention that now my previous post makes no sense).
put the 1st query back to the way it was. then change the 2nd query to remove the record_type and net_sales criteria from the where clause, and instead put the logic into the select, via a CASE, like the first query is written.
now look at the two new queries, and ask yourself, what's so hard about making one query?
and don't do this work in the original post. do it in notepad. and if you want to post the new queries here to get further help, hit the REPLY button, NOT THE EDIT BUTTON

Two info provider in one query

Similar Messages

Maybe you are looking for