Two problems with brand new Mac

Just got a new, pricey MacBook Pro, about a month ago. Anyways, I'm having two strange problems.
Firstly, my MacBook Pro keeps turning off randomly (which is pretty annoying when I'm trying to take notes on it in the middle of a university lecture)... weirder yet is when I start to close it and it's just slightly open it will turn back on but when I open it up fully again it turns off. This issue presented itself to me about 5 days ago and was messed up like that for a whole hour lecture. Then, it seemed to work fine but today while I was on it the issue persisted suddenly again. Now it's working fine, so I'm a little confused as to why it does this.
Secondly, yesterday I downloaded some slides from the profs site but it won't let me open them. I tried downloading other notes, from other profs and now none of them seem to open - just last week they would all open. Along with this my Mac is having trouble opening one of my screenshots of my course calendar.
I'm not a computer guy so maybe I'm just doing something wrong in either cases, I don't know.
Thank you in advance for any advice

Doesn't seem like you're doing anything wrong. Seems like a hardware problem. Since this is brand new I'd take it back to the Apple Store or where you bought it and tell them your problems. If they can't reproduce the problem it might be necessary for them to run Apple Diagnostics:
Using Apple Diagnostics
You might want to do that anyway and see if you can get an error code to come up. It's always easier to walk into the store armed with a fault code.
Since this is still under warrantee it would be fixed for free.

Similar Messages

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

  • Trying to install Deskjet 3054A wireless printing with brand new Mac Book Pro

    Hello,
    I am trying to set up the wireless printing function on the Deskjet 3054A with a new Mac Book Pro, but not having any luck. When I connect via the USB the printer shows up, but once disconnected there is no communication. I tried to get the updated driver on the HP site, but nothing ever downloaded and it kept taking me to the setup page. 
    Is this All-In-One compatible with the new Mac OS 10.10 for wireless printing?
    Thank
    Scott

    Hello Sabuff,
    Welcome to the HP Forums.
    I see that you are having some connectivity issues to you Mac 10.10.
    Just so you are aware, the printer does not have a full feature software and driver package available for the Mac 10.10 operating system.
    You can however try the HP Printer Drivers v3.0 for OS X.
    Please feel free to write me back with any other questions or concerns.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Sound Problems With Brand New 24" iMac!

    1) My new iMac has suddenly stopped making alert sounds, such as for incoming Mail, no Mail etc.
    2) I cannot listen to any radio stations on iTunes any more - dead!
    Is there a problem with the new iMacs and sound?

    All of my other sounds (startup, iTunes purchased music etc.) worked fine. All of my preferences are set OK.
    Here's the odd thing: All of a sudden my alert sounds have come back and I can play SOME radio stations through iTunes, but not all.
    This is very strange!

  • Two problems with my New iPhone 4s

    Hello
    ON my recent iPhone 4s I have two problems faced -
    1.  Battery : The battery seems to be weired. It doesnt last long is one but it also makes the phone crash. I was using the phone normally and there was no sign of battery drained out. I open the camera and suddenly the phone crashed. I left it as is because nothing was working and after some 5 hours it showed that I need to plug in and recharge. I did that and it was normal post that.
    2. Sync : I did the sync of iPhone on the same machine as that of my iPad. Two problems again - a) not all songs are getting synced. It left one genre completely out. b) Audiobooks are not synced at all. I have it all nicely synced on iPad but it doesnt show up on iPhone.
    Has someone else faced the same problem? What is the resolution? Let me know.

    Should be same procedure as this link here:
    http://support.apple.com/kb/HT1664?viewlocale=en_US
    If not, I would say it may have something to do with the vehicle and iphone 4S compatibility! Maybe a back-up and restore of the phone to put the phone back to "factory" settings as if the phone was brand new, and if it persists I would say it's a compatibility issue.

  • Freezing problems with brand new Toshiba P500.

    Hi All;
    I bought a brand new Toshiba Laptop from Myers Melbourne in June 2010 and its running the base version of WINDOWS-7 64 bit. Its a Satellite P500 PSPGSA-01G003 ( large 18.4 inch screen ) which "does not exist" in the model product listing on this website.
    Also it has 4Gb RAM and 2x 500GB HDD. It ran fine for the first 4 weeks or so and then slowly and intermittently it started freezing and not shutting down in the normal manner - generally within a couple of hours of when i opened LARGER size files. On switch on it asked to "restart windows normally" and whilst in the process of running a program, it either ran very, very, very, very, slow ( hanging )or just froze altogether - with only the mouse cursor moving on the screen. To clear the problem and hard reset of the power switch was the only thing that "fixed" it.
     I spoke to others I know at work who have Win-7 (as many are clued up with IT and work with it) and they think "I'm crazy" as they have not experienced on their own WIN-7 OS at home.
    As the model I have is not specifically listed by Toshiba, I cannot be sure if I can update the drivers - which I should not have to do since its a brand new computer straight out of the box.  I'm so frustrated by the problem I've dumped the computer and now have gone back to WIN-XP on a DELL Laptop, until I can sort this drama out.
    My very first issue I had with it after just 4 weeks was it would not turn on at all as though the battery was removed or dead no life at all not even a light on the front panel edge.
    That was "fixed" by a hard reset of the laptop ( pressing the on button down for 10 seconds ) with the battery removed - something I have never had to do with computers in the past.
    Basically I'm of the opinion - rightly or not - that WIN-7 is not all that stable an O/S, since its built on a Vista platform and that being so - I may dump it and go for something radical like Linux or Ubuntu - or maybe worse still buy a Mac.
    But before I go to such trouble and dump WIN-7 and conclude it is a crap OS - I would appreciate some advice as to what the problem might be ! There was a write-up about this in a recent Computer Magazine (APC ?) saying WIN-7 had problems with running sluggish and gummy. Mine is so gummy it freezes.There are dozens of complaint about this very issue on websites and the brand of computer is not the issue nor the common denominator - just the Operating System. It's a Microsoft problem in reality !
    Interested in your replies and a solution to restoring my Toshiba "white elephant" !

    Satellite P500/01G (PSPGSA-01G003)
    See if running the System File Checker helps.
       How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
    -Jerry

  • Problems with brand new iMac

    I have a brand new iMac and my safari can't open my gmail my faceboook, can't dowload flash player because something with the antivirus, can't set my account on appstore, icloud! This never happend and I been using mac for 15 years

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Anyone having a crashing problem with the new Mac Pro?

    I have a new Mac Pro purchased in January.  I bought it as a front end to my very large mp3 library (170,000 mp3s and over 2,000 mp4s; media is housed on a 12 TB QNAP NAS).  Since day 1 it has been a major problem.  The biggest problem I have now is random crashing--can occur any time even when I am not even using the Mac Pro, making it totally unreliable and a $5,200 paperweight.
    I have had several Apple Care people working on this, but after having been passed around to 5-6 different people, they still have no solution.
    Anybody having a similar problem?

    As today I'm sure I'll not make the purchase again.
    The more I look into this problem, the more people and articles I find about it: and it's more than a month and no update to fix the problem.
    PC alternatives are far more interesting and they still give you the choice of building your machine.
    Apple was amazing 15 years ago, where is the team of developpers that created the old Mac Pro?!
    I want to be optimistic too, but I'm already collecting all the info on how to build an backup machine... since I'm using Adobe CC and other interchangeable softwares, there is no more problems swithcing from Mac to PC and vice-versa.
    I hope there will be a third contender entering the market soon, with a dream computer on Linux. I am on mac because of its reputation 20 years ago, but times are changing and Apple vision seems very different now.
    I'm afraid that WWDC will not announce a thing relevant for the MacPro or computers, we got used now to ear only about phones and tablets...

  • Problems with brand new ipod classic

    I purchased a $245 classic for my son's birthday last week. He opened it, was excited, and went straight to the computer to begin using it. Unfortunately, it did NOT work. I can't really say the problems he was having because he was the one using it. I believe he said that it would not format, and that the computer did not recognize the device as an ipod. He then tried it on his girlfriend's computer and it did not work there either. We called Apple and the representative told us to return it to the store. The store told us that it had to go through Apple (per Apple's orders). We called the same guy back and he said to send it in and they would send us a new one. OK, fine. But now they are saying that it was "undetermined accidental damage" and they will not repair or replace it. The ipod did not work from the moment it was opened!!! I find it quite unfair that we now have a brand new completely unscratched $245 paperweight, and no gift for our son. The website does not give me help with addressing this issue. Does anyone out there have any ideas on who to contact next? The guy we talked to in customer service lied to us twice (first by telling us the store would return it, and second by saying they were just going to ship a new one since he had just opened it). We don't really want to bother with him anymore. Our frustration is unreal. Thanks for any insight you might have.

    I can't speak for Apple, and I don't think we could speak to what your son did with the iPod (as opposed to following the setup instructions which I believe are in the box, and direct you to www.apple.com/ipod/start to install iTunes), as when I turned my Ipod Classic 160GB on, it simply booted up and started working. No "formatting" was required.
    If you have an issue where a vendor promises you a return, then reneges ... turn all your information over to your credit card issuer or bank and ask them to initate a chargeback. That will get the seller's attention.
    That's my $0.02.

  • C55D-B5310 At least 3 problems with brand new laptop, now fed up.

    I bought the wife a new C55D-B5310 from Best Buy on the 5th of January, and am now ready to take it back (even though I'm outside the 14/15 day return policy.   I bought it for my wife but had nothing but problems with it.
    First, there was the green videos, totally green and just sound.  No amount of windows updates solved that, I had to download a third party codec pack in order to get it to work.  I had noticed this on the display model as well, and ignored it at the time (silly me).
    Second there was the constantly dropping wi-fi connection.   A search on here and an updated driver + disabling the power save feature for the adaptor has seemingly resolved that.  (but frankly why should I have to disable a power saving feature just to get it to not be 'limited connectivity').
    Then last night I noticed the touch pad was playing up and was stopping responding, disappearing, or simply not being responsive.   At this point after three problems, I'm fed up with this.  A user should not have to get things working that should be working from the factory.   The laptop also seems to freeze at times or be unresponsive in general.
    I'm an experienced I.T. professional, but this was for my wife, and she is also now fed up with it, and now just uses her phone instead, as it's such a pain to use.  Seriously... where was the product testing on this model.  These are such basic things to get right.
    On a side note, I just also bought another (alternative brand) laptop for myself.  It works beautifully.  No connection issues, the touch pad just works, the machine doesn't freeze whilst it's thinking about stuff.  The Toshiba should work model should work just like this.
    I'm now worried I'll be stuck with this pain in the butt laptop, even though it's not fit for purpose.

    I actually bought an HP laptop for $150 from a sample store (i3, 6GB, 750GB HDD, touchscreen)  It works flawlessly unlike the totally non-QA'd Toshiba.  My wife loves the new machine, and without me prompting her, she simply said that it just works, and does everything she wants.  (Obviously this machine is in at least $200+ extra dollar price bracket compared to the $300 dollar Toshiba however, so don't read into this too much).
    I have heard a lot of the UK guys saying that Toshiba's quality has dropped through the floor, with the same sort of problems as I mentioned (plus others).
    Sorry Tosh, but you really need to get your act together with your budget range.  There is absolutely no reason why this machine should have performed so badly, and had at least 3 faults right out of the box.
    I was seriously considering keeping the C55D for myself to use, but after spending a short time with it, it was clearly trash.

  • Having problems with brand new battery installed...Help please!

    Here's my problem. I just recently replaced the battery on my 13" Macbook. The brand new battery ordered from Apple arrived on Saturday and up until last night everything was great. Now all of a sudden the computer is doing the same things it did with the old battery. I am getting the green light on the MagSafe Adapter even though the battery is not fully charged. I am also alternating between "Not Charging" on the battery icon and a "X" on the icon.
    I did some reading and tried resetting the PRAM and SMC. I even uninstalled Leopard and reinstalled Tiger (updating everything afterwards), thinking maybe it was a software issue. (I just recently installed Leopard and hoped it was just a bad install.) None of that really seems to work.
    There is one slight exception- the SMC reset. After I do the SMC reset I get the amber light from the adapter, the icon shows charging and all is well for about 15 to 30 minutes. Then I am back at square one.
    I was wondering if anyone had any suggestions or ideas on what could be going on. Any help would be greatly appreciated! Thanks!
    Message was edited by: luckylindyhopper

    It seems like you have eliminated all the easy fixes for your problem - what is left is the computer itself. Call Apple (800-275-2273) and explain the troubleshooting you have already done. They should set up a repair for your computer. If it is out of warranty you may have to pay for the repair.
    Best of luck.

  • Having problems with brand new ASA5505 and ASDM

    I have a brand new out of the box ASA5505.  I can connect with https://192.168.1.1 and login with blank username/password
    From there I get a screen that tells me I can either
    - Install ASDM Launcher and run ASDM or
    - Install Java Web Start
    If I choose the first option, ASDM runs, I put in 192.168.1.1 (and leave the UNAP blank) and it just sits there trying to connect
    If I choose option 2, it just loads java.com
    I have gone to java.com and installed the Java SE package (32bit and 64bit just in case - I'm on a 64bit Windows OS) which the docs say include Java Web Start, but the router still tells me "Java Web Start is required to run ASDM, but it is not installed on this computer"
    I'm stuck, I've been googling for 2 hours.  Found people say if ASDM doesn't run it could be a java mismatch and just to use the java web start client.  Any help is greatly appreciated.  Thanks.

    Hi
    Yes normally you need a smartnetcontract, but atleast in sweden you can talk to your ciscorep to get the newest software during the first 90 days.
    And yes updating the Java have in several occations in the past made the ASDM stop working.
    Thats the problem with java, it is incompatible with itself so the question must then be why use it to something as important as ASDM and log handeling ?
    I am sorry but I have no answer to that.
    Good luck
    HTH

  • Problems with brand new IPhone's charging?!

    Hi, I recently got the iphone5s, it is now only 2 months old! However I have recently been having some problems charging it, when I use the cable it seems really temperamental and will only charge depending on what angle the lead is at. I assumed it was the charger and so tired another and have also been using it with a portable charger. Both seemed fine at first but then these problems occurred again. When trying to connect it to my computer it becomes recognized and un-recognized very easily and I have to plug/un-plug the cable a few times (after turning it round) until I can get it to work. Sometimes it will work fine but then other times I think it has gone completely. Can you advice me on what may be causing these problems and whether I need to get a brand new lead or it is a fault with the charging port on my phone? Very frustrating please help!
    P.S Didn't want to take it into the apple store as it very temperamental and could work for them and make me look very silly!

    Would you rather risk looking silly or having an expensive iPhone that doesn't work?  Let them examine it.

  • Problems with brand new LaserJet 1102w

    I've had my LaserJet 1102w for two days now, and I'm, so far, regretting the purchase and considering sending it back.  Here's why:
    1.  It shuts itself off after about 10 minutes and will not print after that until someone manually pushed the power button.
    2.  When first turned on, it will only print the first few inches of any given page (built-in Config test page included), then it blinks it's orange light.  If you turn it off and on, try again, then turn it off and on a SECOND time, it will print normally.
    3.  It consisitantly fails to print "larger" files (I quote it because it's not that large..  i.e. a 32MB PDF) -- they gets stuck and require a complete reboot of the printer.
    The only issue I don't see to have is it dropping Wireless...  which is good because we don't have ANY wired devices in our house (which is why I purchased this printer...  most of the devices are iOS, though I'm working on  Win7 laptop at the moment).
    I would love some advice or help getting this printer to work.
    Thanks!
    *EDIT:  I've made sure it's updated to the lasted firmware and that I'm using the most up-to-date driver - both obtained from the HP site.
    This question was solved.
    View Solution.

    This sounds like a problem with sleep mode on the printer.  There are a few things you can do to try correct this problem.  First, make sure the printer is plugged directly into a wall outlet.  If you plug it into a surge protector, power strip, or power backup, it can prevent the printer from getting enough power.  If that's okay, then move on to trying the steps in the document linked below.  If nothing works, then contact HP to see about a replacement printer, or return the printer to where you purchased it, either way, you will need to replace the printer.
    The Printer Will Not Turn On or Respond
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Problem with brand new 55" Dynex DX-55L150A11

    The audio doesn't work when we go through HDMI. Have gone through all 4 inputs and used 3 different HDMI cables. Is there some switch or menu that needs to activate audio that I'm missing, or do I really need to go return this so I can get the same brand new TV with a new HDMI board? Beautiful picture. ZERO sound - but only through HDMI. Very strange. Help appreciated.

    Agreed, what is your source device and audio setting on that device?
    -Agent M
    www.facebook.com/geeksquadrecon
    www.twitter.com/geeksquadrecon

Maybe you are looking for

  • Select all in table element

    Hello all, I created a table element which contains a column of check boxes. I want to add to my table an option to check/uncheck all the check boxes. I already created the events but I dont know how to call the events I created using the table? Than

  • Problem with quiz

    Can anyone help me out. i am fairly new to using Aurthorware and have created a training demo which has 2 quizzes in it. The problem I am having is that when I run the package only one or the other quiz will work. Whichever one I go to first will wor

  • XML Publisher LOV missing values

    I am trying to run an Oracle's XML Publisher in EBS 11.5.10 as Accounts Receivable which I have granted responsibility to run the XML publisher. I go in to the submit a concurrent request type in xml report publisher after pressing tab I am presented

  • Cannot install generic driver for webcam

    i have a windows xp web cam that functions well under windows xp or vista, but when i upgraded to windows 2008 or windows 2008 r2, the webcam becomes unoperational and the driver is missing even after updates. it is a gift from microsoft itself! i wo

  • MDB on MQSeries queue undeployment

    I just started testing MDBs listening on MQSeries queues. WLS 6.1 and MQ 5.1. I followed the instructions in the BEA foreign JMS providers white paper, deployed the MDBs, queued messages and things seemed to work. But shutting down the server reveale