UCCX 8.5.1.11002-22 CAD Agent & Supervisor Errors on Windows 7 PC

We recently upgraded to UCCX  8.5.1.11002-22. We subsequently upgraded all CAD to 8.5 too. Everything was fine for 3 weeks but this morning two Windows 7 systems were not getting logged in. 
On launching 'Unable to download file could not open destination file for writing' message box appeared. It then when on to say ' A licencing error has occured please try again in 5 mins. Then it shutdown.  All our other systems running on XP are fine.
In the agent log there is a message DESK3113 Unknown exception in releasing licences.
I reinstalled the supervisor and agent with the same results.  I also resynched directory services through Cisco Desktop Administrator.
After a while on one of the failing systems I could get into agent although the 'Unable to download file' error box still pops up. The only otehr thing i did on this system was install the Cisco Desktop Administrator and on opening 1st thime that gave same error but then opened thereafter.
We recently had a HA installed but agents were working fine after this so not sure if it could be related.
I have attached the agent and supervisor logs and debug files.
Any ideas would be appreciated.

Hi Barry,
On this Windows 7 pc, is CAD able to login ? atleast with one UCCX ip ?
Check the LDAP hostname\ip address in the Registry key for this CAD clinet, and see if it is pointing to correct IP addresses.
Could you please make sure that the mastership for all the services are running from the UCCX node1 (publisher).
And also the supported clients for the CAD's are
Win XP Professional SP2 (Please check Tech Tips & Release Notes)
Win XP Professional SP3
(Please check Tech Tips & Release Notes)
Win Vista (Ultimate, Enterprise, and Business)
Windows 7 (Ultimate, Enterprise, and Professional)
Windows 7 x64bit with WoW64(Ultimate, Enterprise, Professional )
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Also post the logs from this client box, if it doesn't fix the issue?
Thanks,
Anand
Pls rate helpful posts !!

Similar Messages

  • CAD agent & Supervisor

    Hi,
       We are planning to deploy UCCE componenets on main site and Voice Gateway plus CAD Agents/Supervisor at branch site. in case of CAD desktop monitoring option there will be two rtp streams from branch to CAD server or that would be point to point agent to supervisor?
    Regards,
    MAR

    Desktop Monitoring
    Desktop monitoring uses software running on the agent's desktop (Cisco Agent Desktop) to sniff the network traffic going to and from the agent's phone (hardware phone or software phone) for RTP packets. The monitoring software then sends the RTP packets to the appropriate software over the network for decoding. Desktop monitoring relies on the ability for certain Cisco IP Phones to be daisy-chained with the agent's PC via a network connection and for the phone to send all its network traffic along this connection to the software running on the PC. In this case, the packet sniffing software is able to see the voice traffic coming to and leaving from the agent's phone. It will copy this traffic and send it to the supervisor monitoring the agent or to a recording service for the call to be stored and to be listened to at some later time. Desktop monitoring is not a true service, at least from the perspective of the Service Control Manager. It is a Dynamic-Link Library (DLL), an executable module that is part of Cisco Agent Desktop.
    From UCCE SRND page 178.
    MAR

  • IPCC/UCCX CAD and Agent/Supervisor desktop on Windows 7

    Any word on when Windows 7 will support CAD for Agent and Supervisor’s?

    The product Bulletin indicates CAD will be compatible with Windows 7 in version 7.5(8)
    Cisco Agent Desktop, Cisco Supervisor Desktop, and Cisco CTI Toolkit Options
    Version 7.5(8), FCS Q1CY10
    Version 8.0, FCS Q1CY10
    However, the release notes for 7.5(8) do not show this as being compatible.  Any Ideas on when this is projected? 
    Version 8 does offer Windows 7 support.

  • UCCX 10.5 CAD agent cannot log out

    UCCX version 10.5.1.10000-24
    CAD agent can log in, go ready/not ready just fine.  But when agent hits the logout button, it fails. 
    CAD logs shows logout failure as below.  Trying to figure out why agent can't log out and how to fix it. 
    2015-01-08 16:37:42:747 DEBUG [0x2fdc] Configuration.cpp[978] GetLocalConfigPath: CC0978                Local Path: C:\Program Files (x86)\Cisco\Desktop\
    2015-01-08 16:37:42:747 DEBUG [0x2fdc] MainFrm.cpp[1265] CMainFrame::ACDLoginLogout: MF1265 User clicked ACD LOGIN/LOGOUT button
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] MainFrm.cpp[1390] CMainFrame::ACDLoginLogout: MF1390 User clicked ACD LOGOUT button
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[1125] CAgentStateManager::SetReasonCode: Begin.
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[1125] CAgentStateManager::SetReasonCode: End.
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] AgentStateManager.cpp[155] CAgentStateManager::HandleRequest: Begin handling agent state change request. Use <PromptedReasonCode=0> to SetAgentState.
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] CJToolbars.cpp[679] CCJMainToolBars::CheckButton: set check for <Login> to true
    2015-01-08 16:37:42:748 DEBUG [0x2fdc] PhoneDev.cpp[506] SetAgentState: Begin. Set Agent State AS_LOGOUT       , Invoked ID 9, AgentID joeb, DeviceID 7004, PeripheralID 1, reasonCode 0, ForcedFlag 0
    2015-01-08 16:37:42:750 DEBUG [0x2fdc] PhoneDev.cpp[586] SetAgentState: Set Agent state to AS_LOGOUT         NOT successful
    2015-01-08 16:37:42:750 DEBUG [0x2fdc] PhoneDev.cpp[506] SetAgentState: End.
    2015-01-08 16:37:42:750 DEBUG [0x2fdc] AgentStateManager.cpp[200] CAgentStateManager::HandleRequest: ASM0200  The agent state change succeeded
    2015-01-08 16:37:42:750 DEBUG [0x2fdc] CJToolbars.cpp[679] CCJMainToolBars::CheckButton: set check for <Login> to false
    2015-01-08 16:37:42:750 DEBUG [0x2fdc] AgentStateManager.cpp[260] CAgentStateManager::HandleRequest: ASM0260 End handling agent state change request

    Certainly something to try, but I don't see why that would make a difference in an inability to log out.  I have many customers who only use the default workflow and haven't seen any of them with this issue previously.
    Are you guessing here, or have you actually seen that resolve similar problems?

  • UCCX RTMT and CAD Agent Logs

    I have a CAD agent (version 7.0(1)) which uses the IPCC extension to make outbound calls.  My issue is with the RTMT showing these calls as Contacts Presented and Contacts Handled.  When the agent logs into the client to start their shift, they are showing 17 Contacts Presented and 27 Contacts Handled even though they have not received any calls of yet.
    I have tried to reset all stats in the RTMT, all stats clear for all other agents except this agent.
    Is there a way to clear the call log from the CAD?  This is effecting reports supervisors are gathering for call log data.
    Any advice would be appreciated.

    Certainly something to try, but I don't see why that would make a difference in an inability to log out.  I have many customers who only use the default workflow and haven't seen any of them with this issue previously.
    Are you guessing here, or have you actually seen that resolve similar problems?

  • Cisco CAD agent automatically login to 3rd party web application

    I am aware that Cisco UCCX CAD agents have the ability to launch a web application by configuring the web page within the UCCX Desktop Administrator. This is an excellent feature; however, I need to automate the login to the web application using CAD as well. Is there a way have CAD launch the application and push the user credentials required to login to the application as well once the agent logs into CAD?

    This can be configured in CDA as either voice contact workflow or agent management workflow.

  • UCCX 8.5.1.11002-22 high CPU utilization - 99%

    Hi Guys
    I have client running UCCX 8.5.1.11002-22 in VMWare environment. Client claim that he received email alerts from RTMT pointing out UCCX going over memory usage threshold of 70% constantly in every minutes since yesterday. Alerts show as below:
    ==============================================================================================================
    “On Mon Oct 08 08:36:41 EST 2012, alert UnifiedCCXEngineMemoryUsageHigh has occured. Counter PercentageMemoryUsedAfterGC of Unified CCX Engine JVM Heap on node AUSYDMPUCCX has value of 78  which is over high threshold 70”
    ==============================================================================================================
    “At Sun Oct 07 19:23:55 EST 2012 on node ??????UCCX, the following SyslogSeverityMatchFound events generated:
    SeverityMatch : Alert
    MatchedEvent : Oct  7 19:23:28 ??????UCCX local7 1 : 173847: ??????UCCX.???.???.com: Oct 07 2012 08:23:28.404 UTC :  %UC_MGR_MGR-1-HIGH_MEM_USAGE: %[Facility=MIVR][Current usage=197 MB][UNKNOWN_PARAMTYPE:percentage Old Gen Memory used=100.0][Maximum available=254 MB][AppID=Cisco Unified CCX Engine][ClusterID=][NodeID=AUSYDMPUCCX]: JVM heap memory usage is high AppID : Cisco Syslog Agent ClusterID :
    NodeID : ??????UCCX
    TimeStamp : Sun Oct 07 19:23:28 EST 2012
    ==============================================================================================================
    SeverityMatch : Alert
    MatchedEvent : Oct  7 19:23:30 ??????UCCX local7 1 : 173848: ??????UCCX.???.???.com: Oct 07 2012 08:23:30.633 UTC :  %UC_MGR_MGR-1-HIGH_MEM_USAGE: %[Facility=MIVR][Current usage=195 MB][UNKNOWN_PARAMTYPE:percentage Old Gen Memory used=100.0][Maximum available=254 MB][AppID=Cisco Unified CCX Engine][ClusterID=][NodeID=AUSYDMPUCCX]: JVM heap memory usage is high AppID : Cisco Syslog Agent ClusterID :
    NodeID : ??????UCCX
    TimeStamp : Sun Oct 07 19:23:30 EST 2012”
    ==============================================================================================================
    I was wondering whether we are hitting any bugs at this stage?
    Is there any way we can increase modify the threshold?
    Regards
    Fei

    Hi Fei He,
    Please us the below link on "How to analyze heap dumps"
    http://docwiki.cisco.com/wiki/How_to_analyze_heap_dumps
    Hope this helps.
    Anand
    Please rate helpful posts by clicking on the stars below the right answers !!

  • CSD + CAD agent software always disconnect

    Hi
    Good day
    Can anyone help for the below issues
    CSD + CAD agent software always disconnect ( 10 to 15 times Per hour ) and not recovered automatically and shows CRS failure in CSD.
     Connection lost or timeout with UCCX server.(attached)
    IPPA always disconnect and shows error (attached).
    Cisco Unified CCX Administration System version: 8.5.1.10000-37 -virtualised Esxi 5.0 - Stand alone server - Users on CUCM by LDAP

    You are running the baseline version of UCCX 8.5(1) which is a bad idea. There were several nasty  bugs in the original 8.5 release.  Install 8.5(1)SU4 (8.5.1.11004-25), update the CAD clients and try again.  Also check for any firewalls between your phones/CAD and the UCCX server.
    -Steven

  • UCCE 7.5.8 with CAD Agents sitting in India

    Hi all,
    I've got a scenario and am looking for some inputs.
    I've got a centralized CUCM 7.1.3 with UCCE 7.5.8 and CAD 7.5.8. Today I only phones at our India office and all is working perfectly fine with no issues. I am looking into having CAD agents sitting at this office connecting UCCE environment back in California. I've done some testings with CAD agent installed in India and so far all is looking good. It takes about 60-80 seconds from the CAD login screen to completely login to CAD.My concern is the round-trip delay between Ca and India, it's about 290-300ms round-trip.
    Questions:
    Has anyone successfully deployed this type of scenario ? please share your experience !!!
    Has anyone used WAAS to help accelerate CAD login process ?
    Thanks in advance !!! and I appreciate any inputs/suggestions
    D.

    [email protected] you know if CAD supervisor can monitor agent using CTIOS desktop ?
    Here is your answer I hope it is useful for you .
    UCCE 8.5 SRND page 198
    Support for Mix of CAD and CTI OS Agents on the Same PG
    Unified CCE deployments can support a mix of CAD and CTI OS agents on the same PG. If a mix is deployed, the sizing limitations of CAD apply.
    Note that Cisco Supervisor Desktop (CSD) can monitor only CAD agents, and the CTI OS supervisor application can monitor only CTI OS agents.
    Cisco Agent Desktop, Supervisor Desktop, and CTI OS cannot co-exist with Cisco CallManager PG; the configuration of agents and supervisors must be kept separate. Cisco Supervisor Desktop cannot be used to monitor a CTI OS agent desktop, nor can a CTI OS supervisor monitor a Cisco Agent Desktop agent.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/srnd/5x_6x/c5desktp.html
    Regards
    Irfan Tariq

  • CAD Agent Unable to Login due PGUser Association in CUCM

    Hi all, hope everyone is well.
    I am running a UCCE 7.5.8 environment with CAD 7.5.8 and CUCM 7.1.3 I am having some CAD agent suddenly unable to login to CAD due the following error "An unknow failure was receved from the Cisco Unified Communication Manager. You may have entered an incorrect ID, password, or extension. Verify your entries are correct and try again."
    The fix is to dis-associate and re-associate the device with the PGUser in CUCM even though the device shows it's already associated with the PGUser. Has anyone run into this issue ? I am trying to understand the root cause.
    Thanks all in advance !! I appreciate any inputs / suggestions !!
    Danny

    Hi,
    yes, unfortunately, I have seen this many times working with the ICM 7.x or 7.5.x release train. Always talked to TAC, always installed an ES, but somehow, mystically, the problem went away when upgraded to ICM 8.0(x).
    Looks like a design flaw.
    Did you talk to TAC yet?
    G.

  • UCCX Historical Reports Not Accurately Filtered by Agent Name

    Hello, we're having an odd problem when running our historical reports.  When we filter a report by Agent Name only a couple of agents have any records.  However when we filter the same report by skill or CSQ name the records for all agents are present, leading me to think that the records are not being tagged properly somewhere in the database.  Has anyone seen this before or have any suggestions for resolving this? 
    For an example, if I run the Agent Call Summary report and filter by all of my agent names, I only get records for 3 people during the reporting period.  If I filter based on CSQ name I get records for all 25 agents.
    We are using UCCX version 8.02

    I'm also having agents show in the filter list that are no longer in the system, and in at least one case reports filtered by a skill report an agent who is not assigned to that skill anymore.  Are these symptoms a result of configuration in some way?  I'm starting to feel like the reporting is buggy in this release.

  • CAD Agent build 9.0.2.1064 Issue with calls hanging while being presented

    We up graded to version 9.0.2.1064 for the CAD Agent version after upgrading to version 9 last month. I have one location telling me and I witnessed it today that when a call is presented and the user lets it go as a ring no answer the call acts as if it never leaves the Agent. It does start to ring the next phone in line like it should but the Agent that let the call RNA still shows the call on thier phone like it is still being presented. The Answer/drop button stays lit while this is happening. I can log off the user (it tells me there is a active call in progress) and then log them back in and it works again. This is sporadic sometimes the users go for a day or 2 without it and it happens on multiple users. I did a BUG search and could not find anything.
    Has anyone seen this yet?
    Thank you!
    Dave

    We up graded to version 9.0.2.1064 for the CAD Agent version after upgrading to version 9 last month. I have one location telling me and I witnessed it today that when a call is presented and the user lets it go as a ring no answer the call acts as if it never leaves the Agent. It does start to ring the next phone in line like it should but the Agent that let the call RNA still shows the call on thier phone like it is still being presented. The Answer/drop button stays lit while this is happening. I can log off the user (it tells me there is a active call in progress) and then log them back in and it works again. This is sporadic sometimes the users go for a day or 2 without it and it happens on multiple users. I did a BUG search and could not find anything.
    Has anyone seen this yet?
    Thank you!
    Dave

  • CAD agent http query delay

    Hi ,
    we are using a http query from agent ( CAD ) desktop to get the customer information on to the CAD agent desktop , we are using the ANI from the call and query the DB using the http query
    please advice
    Regards
    Purna

    What's your question?

  • CAD Agent Email stuck in loading

    Hello,
    We have configured Global Settings for Agent Email functionality, created an email CSQ, associated a Skill with it and assigned that skill to an agent.
    When testing Agent Email from a Windows XP box with IE 8 and JRE 1.6.20, everything works like a charm.
    From a Windows 7 box with IE 9  and JRE 1.6.20, the Agent Email in CAD stays stuck in loading with an Email Log Out status at the bottom.
    Anybody has any insight?
    Thanks in advance,
    Paulo Silva

    Hi Paulo,
    Be sure that the correct version of Java is installed on the agent  PC, the best way to complete this is to uninstall all Java versions from  the agent PC, then load CAD and allow CAD to download the version it  needs to work correctly, Java 1.6.0 update 17. Then configure Java for  CAD per the following guide, page 76
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/installation/guide/cad85ccxig-cm.pdf
    As you have mentioned on windows XP with IE 8 and JRE 1.6.20 works fine, can you please try
    IE 8 and JRE 1.6.20 on Windows 7 and check.
    Hope it helps.
    Anand
    Please rate helpful posts!!

  • CAD is not supporting in windows 8

    CAD is not supporting in windows 8. Has there no any solution to install CAD in windows 8?

    Hello
    In order to run CAD within a Windows 8 environment, you would have to run or upgrade to UCCX 10.5.1 and your Windows version would have to be 8.1.
    http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.5(1)
    Hope this helps
    Tony
    Pleas rate helpful posts

Maybe you are looking for