UIXInclude getAttribute Illegal access of the include attribute map out

Using JDeveloper 11.1.1.6.0
I've been digging into the reason why I've been getting this in my logs. At first, I thought it was because of a declarative component, but after further digging, it was actually the region which I'm using inside a declarative region's facet.
<UIXInclude> <getAttribute> Illegal access of the include attribute map outside of the include context
Searching google only gets me to this link:
[ Oracle® Fusion Middleware Error Messages Reference|http://docs.oracle.com/cd/E16162_01/core.1112/e22506/chapter_adf_faces_messages.htm]
Has anyone encountered this same log? If you have, can you share what is causing it?
Thanks.
-Marvin

Found the issue.
Too bad I had to realize it the hard way. When the declarative component is trying to point to an attribute that doesn't exist, then you get this message in your log. Feel bad for the af:region for getting blamed... (but hey the documentation said contact support so that didn't help as well).
Killed the unneeded and anonymous attribute element and everything is back to normal.
-Marvin

Similar Messages

Error Illegal access to the viewer. Please use a valid URL

Hi, One question:
Illegal access to the viewer. Please use a valid URL?
Pls, any comment with this error.
Regards
LEJS

Check the KBA 1892338 - Error: "illegal access to the viewer, please use a valid url" while viewing webi reports from BI Launchpad.This may be because of licence being expired.

I am showing 9 tabs open and I cannot access other websites (they are grayed out when I clock on them). How do I close tabs?

I was working on calendar and opened too many tabs. I am showing 9 tabs open and it affects other sebsites I am now trying to access. The webpage is grayed out and non-accessible. I do not need all the tabs. How do I close them?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Access the oparational attribute 'entryUUID' of an ldap entry

How can I access the oparational attribute 'entryUUID' of an ldap entry? Does someone have a sample code fragment?

Attributes attribs = initLdapCtx.getAttributes(fullName, new String[]{"+"});
This is for OpenLDAP only, because it's the only server I know which supports "+" meaning "all Attributes".
For other Servers you might need to specify the entryUUID Attibute explicitly in the String Array. But be aware that this Attribute might have different Names on different Servers.
Cheers,
Peter

Not able to access the include in exit

Hi ,
I have to work on a user exit, I created project, activated component but when I am trying to go into the include of the FM it is giving me error 'Program names ZX... are reserved for includes of exit function groups'
and I can't go into that...when I am going to chage mode it is asking for developer code...
any idea??
Regards.
Kusum.

thanx Himanshu . such a small step missing
actually its in APO so just looking forward to have access key then I think it will work.
Regards.
Kusum.

Accessing the session attributes in targeting rules

Hello,
Can I somehow access to the session during the creating of targeting rules? For example, if an attribute that should be used in the rule is stored in session? Any suggestions will be highly appreciated.
Thanks,
Yury.

Define a session scoped component and define all you session attributes as properties to that component.
Now you can expose that component a trageting source which will enable that component to be shown in targeting rule.
This is done by defining /atg/targeting/TargetingSourceMap.sourceMap as:
sourceMap+=MyComp=/MyCompPath
Refer "Setting Up a TargetingSourceMap Service" section of Personalization Programming guide for detail

IDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops in that the viewer access from the main menu to play along with

iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with

Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

As described above.
I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
BUTT you cannot access it from remote..
Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

BC4J many-to-may accessing the association the intersection attribute

Hi!
I have a manay-to-many relation in DB between Tab A, Tab B with the intersection Tab C.
I have implemented the relation in BC4J using association and viewlink.
Using A_ViewObject I can now access all the B_ViewObject.
I need to get the value of the intersection attribute(that is the Primary key of the corresponding row in the intersection tabel(Tab C).
regards
RT

Does anyone have details on how to do this? I had the same problem recently and my "solution" was to create a new VO for the intersection table and then insert/remove rows directly to that to manage the relationships. It seems rather redundant to have to do it this way.

Not able to get the context attribute set in ServletContextListener

Hi all,
I have written a simple ServletContextListener and set an attribute in it. when i am trying to retrieve the attribute value in my servlet, I am getting as null. Could anybody please let me know about this if i need to add any more changes.
Below is the complete code of my sample application
web.xml
<web-app>
<servlet>
<servlet-name>myServlet</servlet-name>
<servlet-class>com.mypackage.MyServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>myServlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
<listener>
<listener-class>
com.mypackage.MyContextListener
</listener-class>
</listener>
<context-param>
<param-name>testMe</param-name>
<param-value>TestedSuccessfully</param-value>
</context-param>
</web-app>
ContextListener
package com.mypackage;
import javax.servlet.ServletContext;
import javax.servlet.ServletContextEvent;
import javax.servlet.ServletContextListener;
public class MyContextListener implements ServletContextListener{
public void contextDestroyed(ServletContextEvent arg0) {
public void contextInitialized(ServletContextEvent arg0) {
ServletContext context = arg0.getServletContext();
String testApplication = context.getInitParameter("testMe");
context.setAttribute("myTest", "mkmmkmmkm");
Servlet
package com.mypackage;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletContext;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class MyServlet extends HttpServlet{
public void doGet(HttpServletRequest request, HttpServletResponse response){
ServletContext context = getServletContext();
if(context != null){
response.setContentType("text/html");
try {
String output = (String) getServletContext().getAttribute("testMe");
PrintWriter out = response.getWriter();
out.print("The required value is... "+output);
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
OUTPUT
When accessed with any url as below:
http://localhost:8080/helloworld/u
gettting output as "The required value is... null" . Because i set the context attribute, I am expecting not null. Can anybody suggest me on this.

context.setAttribute("myTest", "mkmmkmmkm");
String output = (String) getServletContext().getAttribute("testMe");You set "myTest" but try to get "testMe"

How can i use the ACL file to control the access from the other website?

Hello all~
My Sun one is 6.1 sp3 on Windows 2003 SE, and I am try to use the ACL file to control the access.
My ACL file is below:
version 3.0;
acl "path=my_path_on_HD";
deny absolute (all)
(user = "anyone") and
(dns = "*.my_site.com");
deny absolute (all)
(user = "anyone") and
(dns = "*.other_site.net");
Once I add the "deny", anyone include my site is decline for vist the path specify in the ACL file. But if remove the "deny", everyone include other one's website can access the file.
Can anybody tell me how to make it work?

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

Illegal access error at runtime

Hi,
I am getting an illegal access error while trying to call a method.
- Class1 tries to call method on Class2.
- Method has package visibility
- Both classes are in same package.
- Class1 is being invoked by a class in a Web Application which is
in a completely different package. Class1 gets invoked properly
and then instantiates Class2. It then tries to call the method on
Class2.
- Compiler is compiling successfully i.e. no compile time errors
Any clues?
Env:
JDK 1.4.2_01
App Server Tomcat 4.0.6
Thanks
Reg
Aashish

Hi,
I am getting an illegal access error while trying to
call a method.
- Class1 tries to call method on Class2.
- Method has package visibility
- Both classes are in same package.
- Class1 is being invoked by a class in a Web
Application which is
in a completely different package. Class1 gets
s invoked properly
and then instantiates Class2. It then tries to call
l the method on
Class2.
- Compiler is compiling successfully i.e. no compile
time errors
Any clues?
Env:
JDK 1.4.2_01
App Server Tomcat 4.0.6
Thanks
Reg
AashishThe problem is the Class1 and Class2 are being loaded by different classloaders. Because of this, they are considered to be in different packages by the VM, and hence the IllegalAccessError.
To correct this, make sure both classes are only available in a single classloader context. So if these classes are only used by the WebApp, include them in a jar in WEB-INF/lib or WEB-INF/classes..
If yyou need access to these across multiple webapps, or by some other non-webapp classes, place them in the /common/lib directory for Tomcat.
Whatever you do, MAKE SURE THEY AREN'T avaialble in BOTH! Which is what appears to be the problem now.

Illegal access of database

Dear All,
How to know who has accessed my Production database illegally? There has been a small change on my one table (this table is not under audit) data. Can any one tell the way how to check the users with their machine names are logged on the Database? This will help us to find out the unauthorized user in Oracle RDBMS?
Thanks,

How do you know the access was "illegal"? In order for someone to update the table in question the end user will have had to have access to an Oracle username with the necessary object privileges. SB has identified how you can find the statement that made the change in question. Log miner also has the ability to generate the DML to undo the change.
But why the change was made may come down to an application coding error like an update or delete statement whose where clause fails to properly restrict the target rows for the statement to the correct rows, or you may have a general failing in security practice. This last would include a developer accidentally applying a change intended for test to production because there is too little control over who has access to the production IDs. Pretty much no one should have direct access to the object owners in production.
HTH -- Mark D Powell --

Exception due to UWL trying to access all the systems in the landscape.

Hello everyone!
We have a problem with UWL in all our environments.
When a user is trying to see his tasks, an error appears at the top of the screen at the end of the update: u201CAn error occurred while trying to connect to the provideru201D.
This happens because the UWL is trying to establish a connection with all the backend systems in the landscape including the ones that the end user has no username in.
Because of that, the SSO fails to this backend system & we get this error.
My question is: how do I limit UWL to access only the relevant systems?
Thanks,
Yoav Zilberman

Hi Yoav ,
Its very easy to solve your problem.
First i would like to explain the your scenario .. so you can get the correct idea of what you need to
do for your problem.
Suppose there are
2 user called UA and UB
2 Roles RA and RB
2 Back-end System SA and SB
Let SA is accessing R3 system and SB is accessing SRM System.
User UA is having SA access and User UB is having SB system access.
Role RA is having iviews for SA and Role RB is having iviews for SB Syetem
Role RA assigned to user UA and Role RB is assigned to user UB
So in your case when user UA is seeing his UWL he will be getting error for SB system and
UB will be getting erorr for SA system.
I hope you are getting same error ... explained above ..........???????
Now Solution
Now to solve the issue you need to edit the Registered Universal Worklist Systems .
Go to the Universal Worklist - Administration from System Administration->System Configuration
Now select your desired registered System Alias and click edit button
now you will see below mentioned attributes
System Alias: *
Connector Type: *
Web Dynpro Launch System:
User Roles:
System Configuration Groups:
Delta Pull Channel Refresh Period (in Seconds):
Delta Pull Channel Snapshot Refresh Period (in Minutes):
In above mentioned Attributes ... go to User Roles: and for SA Alias in User Roles type RA
and for SB Alias in User Roles type RB.
That's all.... your problem solved .. just clear the cache and test.
How It works
From Above case SA Alias will run only for users/groups those who are having RA role same as
SB Alias will run only for those who are having RB role.
So in your case when user UA will log-in only SA will get activated not SB so user will not see any errors
for SB System.
Regards,
Piyush

ExternalGroups not available in the "Other Attributes"

Hi all,
I'm having a problem when i'm using EAP-TLS with certificate for authentication. The authentication is working if my authorization
criteria don't include an external group in the matching criteria. When I try to add an external group in my authorization rule, it
doesn't match my rule.
When i look in the "Other Attributes" field for that client it is not showing up as an available attribute.
Do you know why it is doing this? Does the user i use for joining the AD is missing rights? Anything else? Active directory
is 2003 and 2008..
FYI, when i use the same account to authenticate with PEAP rather than EAP-TLS the external groups are there and i can create
a rule to match the external group for that user.
Also, when i try to read the attributes for this user in the extrernal identity, there is no attributes that are returned. Some other
users are working..
Any clue??? Is there any debug i can enable to troubleshoot this?
thanks in advance

Hi,
The "SGAccess-IT-Firewall" you see in the rule is basically a condition that match the external group i want. This is a predefined condition that's why you see the name of my condition rather than the detail of the condition.
Like i was saying in my previous message, i have multiple rule for testing. Rule #3 and #4 are the rules i'm testing with.
Rule #3 is working because there is no condition to match the external group. Rule #4 is the one i would like to implement but it is not working. So for now i'm switching between both rules for testing.
When it fails, it match the last rule that is a deny access (default rule)
I can't provide a successful authentication from another user because it is never working when i enable rule #4 and use a certificate for authentication. What i was saying, was it is working when i use PEAP for authentication. The difference
i found in the detail authentication reseult is the "other attributes" available. I included a screenshot in my first post.
So far i'm still searching..I can do the same thing in my lab on a test domain and test ISE server and it's working good..

UIXInclude getAttribute Illegal access of the include attribute map out

Similar Messages

Maybe you are looking for