Unable to access connection in 3 tier mode

Hi all,
Product: Business Objects Enterprise XI R2 SP 5 and FP 5.1 on IIS
We have created a small report in DeskI on stored procedures on the DB rather than the universe.
When executing the report on the DeskI at the server locally the report executes brilliantly. But when exported to BO Enterprise and when accessed via the Infoview, it gives the error unable to access the connections defined for the report to run. After which when we click on modify in Infoview, it opens the report in DeskI and gives the same error when trying to refresh the data.
What I am unable to understand is how come it is able to read the connection when I load the report in DeskI directly and the connection fails to work when loaded to the Enterprise hosted on the same server??? Is it a matter of some permissions or network restrictions???

Hi,
To create a WebI report using stored procedures then we should create a universe first. As Universe is the only source for WebI Report. But in DeskI we can directly create a report as datasource can be universe or free hand sql or Stored procedure .......
Cheers,
Suresh ALuri.

Similar Messages

Unable to access connected server after upgrade to Mountain Lion

I upgraded from snow leopard to mountain lion and now am unable to connect to my server.
The error given is "there was a problem connecting to the server"
And in console I get a sharepointbrowser error
There are a few other posts on this but none seem to actually have a fix (for example one recc. was to reboot a bunch of times) I would think deleting/removing the server from the list would work but I don't know how to do that.
I can access the share if I cmd-k and access it manually though so it isn't a SMB issue it seems to be a mountain lion/OS issue.

Hi DWAM_2
Same question to matthew:
1. Are you accessing the KVM through CIMC?
If so, try using a monitor, the CIMC may have been restored to default and has no IP address
Verify(ping) as well that you can reach CIMC and if you do use https://
Also, verify if you connected to the connect ethernet port :)
2. Did you upgrade using HUU(Host Upgrade Utility)
If you didnt, you may have a problem there, both BIOS and ucs firmware needs to be compatible with each other. That is why cisco developed HUU to assist in updating
3. Still does work?
You might need to reset the CMOS, check the manual of your C-series
Typically, you need to short out some pins inside the server or worse case, you might need Cisco's tech support on site
to reload the firmware through hardware

Unable to Access Internet Despite Adapter Showing "Connected".

Hi, I have a Lenovo "G"-Series notebook, Type 4446-38U which has suddenly stopped allowing me to access my internet connections. The PC is only about a month old. It is running XP Professional.
I have three connection options: 1) dial-up (using an onboard HDAudio Soft Data Fax Modem with Smart CP); 2) ethernet or Local Area Connection (using an onboard Broadcom Netlink Fast Ethernet); and 3) wireless (using an onboard Intel WiFi Link 5100 AGN) -- none of these components are showing that they have conflicts/problems in the System Properties/Device Manager.
At my home, which is located in a rural area where I can only get dial-up, I tried checking my e-mail last week (with Mozilla Thunderbird), but received an error notice stating that the e-mail server could not be found; it was the same issue, when I tried to get Norton virus updates (Internet Security 2009), XP updates on the Microsoft website (using Microsoft Updates with Internet Explorer), and simply accessing the web (using Mozilla Firefox) -- i.e., "Server Not Found." The odd thing is that I can not only hear the connection being made by the modem, but can also see that the device is 'Connected', when I check the connection in Control Panel/Network Connections. The following day at my office, I checked the other connection options (ethernet & WiFi), and found that I had the same problem -- i.e., they were shown as "Connected" in Control Panel/Network Connections, but I was unable to access anything on the web (e.g., e-mail, Google, virus/Microsoft updates, etc.). It's as if there is something blocking the internet connection to these programmes/utilities.
When I ran the Microsoft Networking Troubleshooter ('Diagnose Network Configuration & Run Automated Networking Tests), all the Network Adapters were shown as having passed. Ditto, when I ran the "Test a TCP/IP Configuration Using the Ping Command" -- pinging 127.0.0.1, the results showed 4 packets sent and 4 received.
I spent several hours on the phone with Lenovo Tech Support to no avail, and their instruction that I uninstall Norton Internet Security made no difference either. When they instructed me to open a Command Prompt and ping 192.168.1.1, the results showed that there were 4 packets sent and 4 received. When I was instructed to ping the IP Address for the wireless adapter, the results showed 4 packets send and 4 received. When I was instructed to ping www.google.com, the results showed that the ping request could not find the host www.google.com. Lenovo Tech Support stated that there was nothing further they could do, and that I needed to use a utility to set everything back to factory specs (i.e., have a utility programme erase everything on the hard drive and reinstall XP ... and even then I was told that there was no guarantee that would fix things, meaning that the PC would then have to be sent into their repair depot). Before I do this, I was hoping that someone here might know as to what's going on with my connection problems and how it could be fixed, without having to erase everything.
I would appreciate any insight or advice anyone might have. Thanks so much!
~ Jack

I did do a complete uninstall of Norton (i.e., didn't save any of the settings), but that didn't resolve the connection problem. I also turned off Microsoft's firewall as well, once Norton was uninstalled (it had been turned off, when Norton was installed, and once Norton was uninstalled, MS firewall defaulted back to an on/active status).
I also forgot to mention in my initial description of the problem and actions taken thus far to try and correct it, that I additionally tried the "ping" procedure described in paragraph five above in Windows Safe Mode with Networking, but was still unable to connect to the internet.

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Unable to Create Connection ( Connection error DA0005) in DESKI 3 TIER

Hi ,
I have strange error of connection in DESKI 3 Tier.
Work Flow:
=> Wanted to create a deski report in Three Tier( from Infoview) using specific universe.
=> When I ran query it gives me error saying Connection error DA0005( Unable to create connection)
Work around did
=> Created Webi report using same univerese reprort ran fine.
The connection is there on enterprise I don't know whats going wrong.
Can any one help me with this error
Neo.

Hi Experts ,
Any suggestions on this please
Environment : BOXI 3.1 SP3 , OS: AIX , APPS: WAS7, DB Trying to connect is DB2

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Unable to access cisco asa via https or asdm!! connection interrupted message appears on the browser

Hey guys,
I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager from X.X.X.X The following is log from java console
Trying for ASDM version file; url = https://x.x.x.x/admin/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
When i try to access it from the browser it show error message
"The connection was interrupted"
I am running CISCO ASA 8.3 (1)
with asdm image as asdm 7.1.3
JAVA version installed Java 7 update 71
I have added the https:> to exception site list and set security level to medium,
even ssh access is not working !!
I would appreciate if anyone can help me out!!
Thanks
Fareed

Hey lcaruso,
thanks for information!!
i was able to connection through console as suggested and regenerated the rsa key .. was able to connection through ssh, but the issue with the asdm or web access was not resolved.
I have tried few of the steps as suggested on
https://supportforums.cisco.com/document/49741/asa-pixfwsm-unable-manage-unit-sshtelnetasdm#collect_captures
capture output
ZHHFP-FIREWALL1(config)# sh cap capin
139 packets captured
1: 18:50:17.654720 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: S 2567327150:2567327150(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
2: 18:50:17.654812 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: S 590825877:590825877(0) ack 2567327151 win 8192 <mss 1380>
3: 18:50:17.655621 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825878 win 65520
4: 18:50:17.656078 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: P 2567327151:2567327332(181) ack 590825878 win 65520
5: 18:50:17.656139 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327332 win 8192
6: 18:50:17.656475 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: FP 590825878:590825878(0) ack 2567327332 win 8192
7: 18:50:17.657696 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825879 win 65520
8: 18:50:17.657802 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: F 2567327332:2567327332(0) ack 590825879 win 65520
9: 18:50:17.657848 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327333 win 8192
10: 18:50:17.658108 802.1Q vlan#1 P0 192.168.160.113.58085 > 192.168.160.126.8
443: S 1351758892:1351758892(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
also i have downgraded the java to 1.6_45 but still not luck.
error message i received on java console
Trying for IDM. url=https://x.x.x.x/idm/idm.jnlp/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at com.cisco.launcher.w.a(Unknown Source)
at com.cisco.launcher.s.for(Unknown Source)
at com.cisco.launcher.s.new(Unknown Source)
at com.cisco.launcher.s.access$000(Unknown Source)
at com.cisco.launcher.s$2.a(Unknown Source)
at com.cisco.launcher.g$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.EOFException: SSL peer shut down incorrectly
at sun.security.ssl.InputRecord.read(Unknown Source)
... 15 more
Any help would be highly appreciated!!
Thanks
Fareed

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our system remote. A VPN connection is created, but I am unable to access servers on our network. This works on iPhone 4.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.

Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION

Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0

You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn .

Unable to access LAN behind RV042 from QUICK VPN Client once it connects

Hi,
Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
What's the problem in configuration? What i have to do?
Thanks
VC Gundapaneni

Hi There.
have a look over here.
http://www.linksysinfo.org/index.php?threads/netbios-issues-with-vpn.16170/

Mac being unable to sever connections and I can't access secure databases

Recently my university library underwent a security rehaul, since then I have been unable to access secure databases to do research for papers and the like. After resetting my browser, emptying my cache, and shutting down my computer, I am unable to sever my old connection to the library page.
The weird thing was I was in a chat with a librarian at the school at the time, and it never signed off even when my computer was shut down...
What do?

This will tell you if your apps are compatible:
http://roaringapps.com/apps:table
Thanks ... Ken

I upgraded to iOS7 without incident and has been functioning fine. However, today, I'm unable to access anything that requires connection. WiFi strong, working fine on other devices - any suggestions?

I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

Unable to edit or delete profile in Access Connection 5

Hi Everybody!
I'm unable to edit or delete profiles in Access Connection on my T41 running latest Access Connection v5.
The edit and delete buttons on the Access Connection Profile menu are shown only in light grey color and it's not possible to click them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during system update) and I guess that this is one of the root causes of my problem.
I have also tried to use the QCTRAY.EXE /DEL command, but that's also not working. The profiles just remain there unchanged.
I would be very pleased if somebody could give me a hint on how to overcome this boring problem.
Best regards,
Helmut
Solved!
Go to Solution.

v3 profiles are not compatible with v5.
The best solution in your case would be to uninstall Access Connections with profiles and then reinstall and create new profiles.

Connection timed out on website. Tried clearing cache/cookies. No proxy. Internet Explorer. Still unable to access. Please help. Website is working.

I get Connection Timed Out on these websites: energy-medicine-software.com and energy-medicine.info. I tried clearing the cache/cookies. I put in No Proxy. I tried Internet Explorer and still unable to access. I rebooted my computer. I know that this website is active because I contacted the webmaster and he says that it's active at his end. What else can I do to access this site? Thanks!

Make sure you install several add / mal-ware scanners and run them all
once in a while. Also;
It’s very sad, but many of the software down-loaders / installers will trick you
into installing not only their program, '''but other programs as well'''.
You have heard of the '''fine print in shady contracts''', right? Well, some
installers you need to look at the '''itsy bitsy teeny weeny fine print'''.
You are thinking you are giving the installer permission to install the program
you want by using the '''recommended''' option. But if you use the
'''Manual Option Instead''', you discover all kinds of stuff that
'''you do not even know what it is or what it does'''. From now on,
everyone needs to '''Use The Manual Option''' to put a stop to this.

Unable to access connection in 3 tier mode

Similar Messages

Maybe you are looking for