Unable to call conference on Android after installing WebEx

Hi,
I'm using the WebEx android app on my Samsung Galaxy Note 2 (N7100). After installing the WebEx app, on the call screen, I see a WebEx button instead of the "Add call" button. I can still add a second call using the "overflow" menu. But after adding a call, the call "Merge" button doesn't appear anywhere. The WebEx sphere now appears in place of the "Merge" button. The overflow menu doesn't contain the Merge option either. Uninstalling the WebEx app fixes this issue.
I've searched around and found a lot of people asking this question. But with no resolution for their query.
Please see screenshots below with two calls in progress and no option to Merge. The WebEx logo takes the place of the Merge button.
At this point, my only option is to remove the WebEx app and install it only when needed.
Please provide a solution.
Thanks.
Warm regards,
-Adi

Is anyone on the Cisco Android support team paying any attention to these threads?
This is a pretty big issue. I have been a paid WebEx customer for years now and the most recent update took over my add call button -- rendering my phone useless unless I uninstall the app. I have read a few places where everyone mentions this and says there is optional work arounds, but I would like to know what the deal is and when a solution will be provided.
The mobile app is pretty important to my day to day, but not nearly as important as add call and merge. Please explain how we can change this setting or avoid uninstalling the application.
This only happened with the most recent update.

Similar Messages

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Unable to connect to Apple TV after install Mavericks

Hello I'm unable to connect to Apple TV after install Mavericks. :-(
The icon of the Apple TV no longer appers on the top menu and my Mac is unable to discover it...
The Apple TV Box is upedated to the most recent software version.
Apple TV is connected to the same Wifi network of my Mac
I have a:
Mac Book Pro 13-inch, Early 2011
Processor 2,3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Serial Number <edited by host>
Software OS X 10.9.2 (13C64)
Can anyone help me ????

Hello M.A.S.Ramos,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
http://support.apple.com/kb/PH14375
Make sure your Mac and your Apple TV are on the same network.
Choose your Apple TV from the AirPlay status icon in the menu bar.
Choose This Mac or your Apple TV depending on how you want to match the desktop size of your Mac.
OS X automatically detects an Apple TV when it’s on the same network, and displays the AirPlay icon in the menu bar. When AirPlay Mirroring is active, the status icon is blue.
Have a nice day,
Mario

Unable to print on HP J6480 after installing Snow Leopard

After installing Snow Leopard I've been unable to print from my HP J6480. I get an error message saying to check for updates from Apple and the manufacturer. Apple shows no more updates. I've added a printer driver v2.6 from Apple, but that hasn't helped. Had no problems printing before this. Any suggestions?

Never mind. Just went to Hewlett Packard site and the suggestion was to reinstall the printer. I did so and it now works. Of course, the reinstall wiped out other printers I had on there....Adding Snow Leopard has resulted in much more work than I thought it would be!

Unable to login to my WindowsPC after installing new iTunes version 7.4.3.1

Hi all,
I just received an alert saying a new version of iTunes was available and I went ahead and installed it. After the install the system prompted me to restart. I did the restart and now I am unable to log back into the system.
I tried my local and domain accounts and all that happens is it starts the login process and says loading local settings and then says logging off and gives me back the login screen.
I am unable to gain access to the system through normal settings and or safe mode. I fear that if this is a iTunes problem we're going to have major problems at my clients who do allow this application on their network.
Any thoughts, issues on or about this?
Please advise.
Thank you,
~The Suite~

Hi Timmy,
Thank you for the comments and feedback. I had logged into the system when I got in this morning and nothing else was installed nor changed. The iTunes update was the only change between the successful login and now me being unable to login.
I am doing some rollbacks and will see what happens.
Thank you,
~The Suite~

OfficeJet 6700 - "Unable to communicate with printer" message after install

I am on a hybrid network with Windows 7, 64-bit. Printer is hard-wired to the router (ethernet) but laptops are wireless. Installation doesn't allow for a hybrid option, just wireless or wired, so I installed as wired.
I just installed the OfficeJet 6700 - installed OK. I also updated software/firmware during the install process.
Windows' "Devices & Printers" recognizes the HP as being installed.
Printer is able to produce the network configuration page, etc. so we know the printer is functional, but when I try to print I get an "Unable to communicate with printer" message.
Windows' "Devices and Printers" troubleshooter thinks the driver is not installed, but as I mentioned, I just installed software from the CD.
UPDATE: I was able to install & print without problems on my wife's Win7, 64-bit laptop. Something about mine seems to be the issue. Also, HP Print & Scan Doctor reports that everything checks out OK, but when I try to print a test page at the end of the good doctor's diagnosis, I am still "unable to communicate with printer."

Sorry this is so long, but I tried to be through in my testing.
Followed your suggested steps.
I had previously set a static IP address, but just to be thorough, re-set it again with the same address.
I unplugged the USB cord from the laptop.
I began with the device labeled "HP OfficeJet 6700 (Copy 1)," which was set as the default printer.
After entering the IP address & clicking Next, it searched the network and returned this message:
Additional port information required
The device could not be identified.
The device is not found on the network. Be sure that:
1. The device is turned on.
The network is connected.
The device is properly configured.
The address on the previous page is correct. (re: the page where the IP address is entered)
If you are sure the address is correct, select the device type below.
I selected Standard (Generic Network Card) and clicked Next.
Summary dialog appeared and I clicked Finish.
Clicked OK/Apply.
Attempted to print. Like before, it sent the file to print queue - then nothing.
Right-clicked on the "Copy 1" device and selected Troubleshoot. Returned the message: Make printer "Fax HP OfficeJet 6700 the default printer" - even though this copy is already the default printer. (Usually when the original copy is set as the default, this copy is automatically re-named "Fax HP OfficeJet 6700.") I chose "Apply this fix."
Summary page said "Troubleshooting has completed." I closed the troubleshooter and attempted to print. I closed the Devices & Printers window so it could refresh. Re-opened Devices & Printers. Now the default printer is named "Fax HP OfficeJet 6700." The other device is grayed out and is simply named "HP OfficeJet 6700."
Attempted to print. (I'm testing w/ Notepad and .txt files)
I have 3 choices in the Notepad's printer dialog box but only 2 devices showing in the Devices & Printers window:
~ "Fax HP OfficeJet 6700" - This is the default printer in the Devices and Printers window. I clicked on Print & rec'd an error message: "Send Fax - HP Officejet 6700. There is a problem communicating with the Printer. Check your USB connection & verify that the printer is ready." Notepad's print dialog box shows status as Offline. I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is the printer that shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." There is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. Notepad's print dialog box shows status as "Ready." In Devices & Printers, when I right-click on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing," 2 HP devices are listed - the one labeled "Copy 1" and the one labeled "Fax." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
I plugged in the USB cord again and re-ran the same series of tests.
~ "Fax HP OfficeJet 6700" - This is still the default printer in the Devices and Printers window. Notepad's print dialog box shows status as "Ready." The fax window opened, waiting me to enter the recipient's name, add a cover sheet, etc. I closed the fax window. The .txt file was in the print queue for the "Fax" device, so I canceled all documents in the print queue.
~ "HP OfficeJet 6700." When I choose this printer option, Notepad's print dialog box shows status as "Paused - Offline." I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This is grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)." Again, there is no printer by this name in the Devices and Printers window even tho' it shows in Notepad's print dialog box. This is one of 2 choices in the device labeled "Fax" - the default device. Notepad's print dialog box shows status as "Ready." I clicked on "Print" and like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Next, I used the printer's touch screen interface and turned the wireless connection off, leaving the USB cord plugged in.
~ "Fax HP OfficeJet 6700" - Status: Ready. The fax window opened, same as before. I closed the fax window & canceled all documents in the print queue.
~ "HP OfficeJet 6700 - Status: Paused - Offline. I clicked on "Print" anyway, and like before, it sent the file to print queue - then nothing. This one shows as grayed out in the Devices & Printers window. I canceled all documents in the print queue.
~ "HP OfficeJet 6700 (Copy 1)" - Status: Error. I clicked Apply, then Print. Again, this is one of 2 choices in the device labeled "Fax" - the default device. Like before, it sent the file to print queue - then nothing. I canceled all documents in the print queue.
Reconnected to the wireless network & verified that the IP address had not changed.
Tried again to print using "HP OfficeJet 6700 (Copy 1)" - Status: Ready. I clicked Print and again, it sent the file to print queue - then nothing. This is still listed as one of 2 choices in the device labeled "Fax" - the default device." Like before, I canceled all documents in the print queue.
Next, I right-clicked on the one labeled "Fax OfficeJet 6700" (the default device) and choose "See what's printing" and selected the device labeled "HP OfficeJet 6700 (Copy 1)." In the print queue window, when I click on "Printer, one of my options is "Set as Default Printer." As soon as I did that, the device in the Devices & Printers window was renamed as "HP OfficeJet 6700 (Copy 1)" - no longer named "Fax." I tried to print again. Once again, file was sent to the print queue but never printed.

Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
Control the issue is found en the WIFI connects correctly.
I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)
see below error report:

Hi,
With the google translate, It seems that you are facing with the following problem:
A network cable is not connected correctly or may be damaged
Problem with wireless adapter or access point
For this issue, I suggest you try the following steps:
Try with another account, or test with another system, another cable.
Reinstall network adapter.
Open Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
Test this issue in safe mode with networking
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
Does this work? and I would be appreciate if you could update the diagnostics with English.
Regards,
Yolandac

I am unable to activate my iPhone 3gs after installing ios 5. please help.

hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. please tell me how to activate it or how can i get back my original factory settings. need ur help guys do suggest me something.

Hi Vivek,
I am facing this problem too.
Were you able to fix this problem.
If yes then how??

Unable to remove malware on safari after installing maverick update

Apple Community:
Software Installation Steps:
1. Product: Java Standard Edition v.7.67 (Update Installed 08/16/14)
2. Product: Safari v.7.0.6 (Update Installed 08.16.14)
3. Product: CalmXav v.2.6.4 (Software Installed 08/17/14)
4. Product: OS X Maverick v. 10.9.4. (Update Installed 08.20.14)
On 08/16/14 I installed the Java Standard Edition to replace the Java Oracle Software. I requested software update for Safari and discovered the Safari Update and installed accordingly. Then, I recognized pop-up windows constantly opening with the advertisement to install MacKeeper. Apparently, my trial period had ended, thus requiring payment to execute a complete clean-up of macbook hard drive. Since then, I have downloaded CalmXav to remove any and all corrupted files, software, etc. Yet, I continually have multiple pop-up windows open when using Safari. I have gone to the Safari Preferences and changed privacy setting to block all cookies and other website data "from third parties" in addition to removing all websites and cleared the cache. However, upon restarting macbook, I find the settings in Safari Privacy reverted back to "never" block cookies and other website data. Can you please advise how to resolve this issue of what I believe to be "malware pop-up windows from occurring?"

The Safari update was bogus. You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Strange folder called "System Folder" appeared after installing Appleworks?

I started from scratch and wiped the drive, due to bad system symptoms. I installed OSX WITHOUT OS9 CLASSIC. Everything is working fine, printer drivers, internet, all apps etc. But I decided to install Appleworks. I chose from the reinstall choices to select Appleworks, but did not select Classic at all at anytime. I just discovered besides the OSX system folder with its distinctive design, that there is now another folder named System Folder, but it has no system and only Application Support, Extensions, Fonts, and help as folders. This looks like OS9 without a system. Was this installed for Appleworks?, as I remember from OS 9 Appleworks needs to install stuff in a system folder. Is that why this is here? Is this normal, The "System Folder" was locked. Should I do anything to this, delete it, rename it or what. Command info says that it belongs to system, not me, and it defaults to locked. I can unlock it, but to change its ownership, admin password is needed. I thought everything was going well, now this questionable stuff shows up, and enlightenment would be appreciated, as I just spend days fixing it all up, and don't want more trouble, especially so soon. Remember, Classic has not been installed, but I did first tried an archive and reinstall, and had a previous system folder, but I don't think this was dragged over from archived stuff when working on this whole new clean setup.
Thanks, James

I started from scratch and wiped the drive, due to
bad system symptoms. I installed OSX WITHOUT OS9
CLASSIC. Everything is working fine, printer drivers,
internet, all apps etc. But I decided to install
Appleworks. I chose from the reinstall choices to
select Appleworks, but did not select Classic at all
at anytime. I just discovered besides the OSX system
folder with its distinctive design, that there is now
another folder named System Folder, but it has no
system and only Application Support, Extensions,
Fonts, and help as folders. This looks like OS9
without a system. Was this installed for Appleworks?,
as I remember from OS 9 Appleworks needs to install
stuff in a system folder. Is that why this is here?
Is this normal, The "System Folder" was locked.
Should I do anything to this, delete it, rename it or
what. Command info says that it belongs to system,
not me, and it defaults to locked. I can unlock it,
but to change its ownership, admin password is
needed. I thought everything was going well, now this
questionable stuff shows up, and enlightenment would
be appreciated, as I just spend days fixing it all
up, and don't want more trouble, especially so soon.
Remember, Classic has not been installed, but I did
first tried an archive and reinstall, and had a
previous system folder, but I don't think this was
dragged over from archived stuff when working on this
whole new clean setup.
Thanks, James
Thanks for the simple answer. I guess I was surprised to see another folder called system, and it kind of scared me, wondering if everything was "Kosher" with my reinstallation of OSX?, yet I didn't want to adversely effect Appleworks.
I merely put the files in the trash, then tested Appleworks, it still works, so I believe I can trash the whole folder without worry. I was worried and not thinking correctly, having spent sleepless nights installing all the stuff back again, and that clouds my thinking and judgment. James

Unable to start the Weblogic Server after installing OFM SOA suite

Hi All,
As part of Oracle Fusion Middleware installation, i installed the SOA suite and tried to start the AdminServer configured for the SOA domain. But the server was forced shutdown due to the following error messages. (Windows 7 is my OS). Please help me to resolve this issue.
<AdminServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>>
<> <> <1265344200947> *<BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException:*
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load
LDIF for provider Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider
Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 2428110 *INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS)* VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
FailedObject: [email protected]3c
     at org.apache.openjpa.jdbc.sql.DBDictionary.narrow(DBDictionary.java:4207)
     at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4171)
     at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:102)
     at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:72)
'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1265344200971> *<BEA-090082> <Security initializing using security realm myrealm.>*
####<Feb 4, 2010 10:30:00 PM CST> <Critical> <WebLogicServer> < > <AdminServer2> <main> <<WLS Kernel>> <> <> <1265344200974> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Dear Bhushan
The root cause is this Error Stack Trace:
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 2428110 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
Means, it is NOT able to find any DB Schema with the Table named like "BEAXACMLAP"...
When we create a new domain using Config wizard, you select customize option and in one of the following screens you will see like 2 Radio buttons with options as " I do not want to change anything here" and " I want to create, change or remvoe RDMBS support". NOW use the Default setting like I do not want to change. Once I checked other radio button and ran into issues like yours. Basically if you check, YES, then you need to load another .sql file in this db schema located at: "C:\beawls1032\wlserver_10.3\server\lib\rdbms_security_store_oracle.sql". This .sql file has the above missing table "BEAXACMLAP".
So I guess all you folks may have checked the radio button option YES, but did not run the above .sql file in that db. Under your domain root folder/config/jdbc you should see a .xml file with above datasource details. So run the above .sql file in that schema.
I would say please start over again. Create a new domain from config wizard and use default setting for above screen that I mentiond like " I do not want to change anything here" and proceed. I am hoping that should work.
NOTE: Running RCU utility or RCU related .sql files will NOT have above missing tables. RCU Utility will have all schemas/tables specific to SOA Components only like BPEL, WebServices, Workflows etc etc.
Thanks
Ravi Jegga

Unable to open Adobe Captivate 8 after install - Windows firewall prompt

Hi Guys,
We've just installed Captivate 8 for a user and they cant open without getting the Windows Firewall prompt. Don't really want to give our users admin rights just so they can run an application.
Have googled the problem and it seems to be a known issue without an Adobe authorized workaround or fix.
Your assistance in this matter is appreciated.
Thanks and regards.
Bryan.

Further to this, a job has been logged with Adobe support. As a temporary workaround if you let Captivate fully load in the background before cancelling the firewall prompt it can then be used.

Unable To Write Right To Left (After Installing Win7 SP1)

Hey You All!
Yesterdy I've Installed Windows 7 Sp1,
And Today When I Tried Writing In Hebrew (Right To Left)
In My Photoshop CS5 - ME (Supports TRL Writing), It Writes Backwards
Like If I Were Using Regular Non Hebrew/Arabic Supporte Text...
Has Anyone Else Encountered This Problem? Please Help, It's Slows Me Down In My Workplace!!!
Thanks!

Hey Again!
Well First Of All Thank You For Trying And Helping Me!
I've Tried To Look For A Sloution But With No Luck, But...
It's Seems That There Is Something Even More Weird Going On,
As You May Know Once You Install Photoshop CS5 (ME Or Not) On A Win7 64Bit OS
It Installs Both 32Bit And The 64Bit Versions... So Here's The Weird Part:
1. If I'm Typing In Hebew In Ther 64Bit Version - You Get The Letters Backwards
2. But If I Use The 32Bit, Evertyhing Seems To Be Working Okay...
What Do You Think Is Going On?
I Also Failed To Mention That I Also Updated To IE9 Perhaps It Is Causing The Problem Also?
Anyone?

Unable to open Canon CR2 files after installing Camera Raw 7.3

I have photoshop elements 8 and have used raw files from my canon 450D for several years. Just upgraded to Photoshop Elements 11 and it doesn't recognise the .CR2 files o, as far as I can tell any other type of Raw file. This despite loading Camera Raw 7.3?
Can anyone help?
Message title was edited by: Brett N

Now then ssprengel
I think we are getting somewhere.
I have not had a chance to look at the other logs you suggest yet. But...........
I made sure the old Camera Raw.8bi file was remnamed with a totally fictitious extension so that the new file from the linkk you sent could not be mistaken..........but no joy.
I then copied the Camera Raw.8bi file from the Elements 8 equivalent folder, this is onlly circaa 11Mb instead of circa 20Mb, and..........
..........whoa and behold ............ I can read all my .CR2 files through PSE11 and also PSE* still works!
You are a star!
I don't know what other functionality is missing. Maybe there is some. I shall have to investigate.
Maybe the latest plugin only works on x64 systems?
So next steps are for me to a) review the other logs you suggest, b) try downloading the equivalent files from PSE9 and PSE10 and see if they work, c) ask Adobe why this has happened.
Many thanks
Martin

Call an executable after Installing an application.

Hi..
I am using Labview 7.1 application builder to build my application. In that one, one option is there to call one more executable after installing this application.(Installer settings/Advanced/Run after installation). But I am trying to call one more exe which is built in Labview only. But it is not working and not giving any error messages. Please let me whether it is possible to call Labview exe in this manner.
Thanks in advance

Hello,
It's been some time so I'm not sure you still need this help. In any case, the executable that you want to run after the installation must be an LV executable and you don't have to forget to add it in the Installer settings->Files. You don't need to use the full path but the name of the executable must be right spelled.
I use that option to configure the Registry keys that will determine how the main application will run. I compile the Configuration program in the Application Builder and when I compile the main application, I include the executable and make it run with the installation.
I have one problem though. I also install the Configuration program in the group so the user can run it later if he needs so. I have two main applications that can run in the same computer and both use, and add to the group, the configuration program. My problem happens when I uninstall one of the main applications. It uninstalls the Config. program although the other main application is still there. I expected that the system would know that there's still at least one application that needs that tool, something like the DataSocket tools that are uninstalled only if you uninstall all the applications that will use them.
If you have any questions or comments on the original issue, please let me know.
Thanks,
Marce

Unable to call conference on Android after installing WebEx

Similar Messages

Maybe you are looking for