Unable to install gcc, says /var filesystem full

Hi,
when i am trying to intall gcc on solaris9, it says
NOTICE: alloc: /var: file system full
cpio: Cannot write "reloc/lib/libstdc++.a", errno 28, No space left on device
cpio: Cannot write "reloc/lib/libstdc++.so.5.0.5", errno 28, No space left on device
cpio: Cannot write "reloc/lib/libsupc++.a", errno 28, No space left on device
cpio: Cannot write "reloc/man/man1/cpp.1", errno 28, No space left on device
cpio: Cannot write "reloc/man/man1/gcc.1", errno 28, No space left on device
cpio: Cannot write "reloc/man/man1/gcov.1", errno 28, No space left on device
cpio: Cannot write "reloc/man/man7/fsf-funding.7", errno 28, No space left on device
cpio: Cannot write "reloc/man/man7/gfdl.7", errno 28, No space left on device
cpio: Cannot write "reloc/man/man7/gpl.7", errno 28, No space left on device
124787 blocks
when i try to check the disk free using df -h, i get output as
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 149M 32M 103M 24% /
/dev/dsk/c0d0s6 1.3G 451M 784M 37% /usr
/proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c0d0s1 52M 3.6M 43M 8% /var
swap 585M 12K 585M 1% /var/run
swap 585M 0K 585M 0% /tmp
i can see clearly tht my first slice which i have used for /var filesystem is not full. what might be the problem?
thanx in advance
regards
bushan.

hi,
I am having a similar problem while trying to install gcc...This is the error messg I get-
cpio: Cannot write "reloc/man/man7/gfdl.7", errno 28, No space left on device
cpio: Cannot write "reloc/man/man7/gpl.7", errno 28, No space left on device
210439 blocks
2 error(s)
pkgadd: ERROR: attempt to process datastream failed
    - process </usr/bin/cpio -icdumD -C 512> failed, exit code 2
pkgadd: ERROR: unable to unpack datastream
Installation of <SMCgcc342s> failed (internal error).
No changes were made to the system.But when I do a df - h it looks like I have enough space...then why am I getting this error?
bash-2.05$ df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/dsk/c0t0d0s0      2.5G   2.3G   138M    95%    /
/proc                    0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
fd                       0K     0K     0K     0%    /dev/fd
swap                   3.6G   176K   3.6G     1%    /var/run
swap                   3.6G   456K   3.6G     1%    /tmp
/dev/dsk/c0t0d0s7       14G   2.5G    11G    19%    /export/home
/vol/dev/dsk/c1t6d0/networker_vol_1
                       464M   464M     0K   100%    /cdrom/networker_vol_1
/export/home/dupont     14G   2.5G    11G    19%    /home/dupontthanks,
R

Similar Messages

  • /var filesystem full according to df but not du command? How do you resolve this?

    Environment is a 2 node cluster, one node is running Oracle DB and the other running Oracle AS. Node running Oracle AS has /var of about 9.9G. /var is an independent filesystem and not part of /. After rebooting or when there are no users accessing the application, /var is about 2.4G and this is reflected on both df and du commands. But afew minutes into application usage and that shoots up to 100% capacity utilization reflected in df -h command output but du still hovers around 2.4G. I know to resolve this scenario you look for open but deleted files i.e. files with a link count of 0 using
    find /proc/*/fd -type f -links 0 | xargs du -k | sort -n
    They are binary files, application related I suppose but when I view them with cat command I get to make out a few details in plain text. I decided to delete one as a test case and see if it affected any real data, surprisingly it did. How is this possible if link count is zero? Has anyone experienced such a scenario before? I can't apply the resolution to this problem without affecting data so am in quite a fix
    Note: I know nothing about Oracle AS

    user10980710 wrote:
    Environment is a 2 node cluster, one node is running Oracle DB and the other running Oracle AS.
    That's not a cluster.  That's simply two different servers, each with its own distinct function.
    Node running Oracle AS has /var of about 9.9G. /var is an independent filesystem and not part of /. After rebooting or when there are no users accessing the application, /var is about 2.4G and this is reflected on both df and du commands. But afew minutes into application usage and that shoots up to 100% capacity utilization reflected in df -h command output but du still hovers around 2.4G. I know to resolve this scenario you look for open but deleted files i.e. files with a link count of 0 using
    find /proc/*/fd -type f -links 0 | xargs du -k | sort -n
    They are binary files, application related I suppose but when I view them with cat command I get to make out a few details in plain text. I decided to delete one as a test case and see if it affected any real data, surprisingly it did. How is this possible if link count is zero? Has anyone experienced such a scenario before? I can't apply the resolution to this problem without affecting data so am in quite a fix
    Note: I know nothing about Oracle AS
    So where is the ASM question here? (This is the ASM forum).  Looks to me like this would be better addressed in a Linux forum, of which there are several on the Web, both within OTN and outside.

  • HP Envy 5532 Printer - unable to install a driver with full functionality

    Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
    So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences  to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
    The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
    Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
    The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
    We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
    We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
    We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
    We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
    Any help would be appreciated
    Thanks  Steve

    @Steve_Reeder, welcome to the Community
    I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
    I will do my best to make some helpful suggestions to you to try out.
    It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
    You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
    Another idea would be to run the System File Checker to see if this scan will pick up any issues:
    Using System File Checker to Restore System Files
    Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
    I hope to hear from you, enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT1222 My phone will not let me install the update. All it says is, unable to install iOS 5.1.1

    All I'm a getting is an error message. My phone will not let me install the install the most current OS. I am connect to wifi , with a full charge on my battery. Please help.

    Try the steps in this troubleshooting assistant:
    http://www.apple.com/support/iphone/assistant/restore/
    Also, it says its unable to install the update, is there an error number, what is the exact message?

  • Display level suppressed when installing Office 365 ProPlus via SCCM even though XML says Display Level="Full"

    As the title says the display level is suppressed when installing Office 365 ProPlus via SCCM even though XML says Display Level="Full"
    I would like to install Office ProPlus with the display level visible to the user.  Not all users are local admins so I've installed Office within the admin context.  Does this happen because SCCM installs under system context and as such suppresses
    pop ups to the end user?
    Has anyone been able to get this to work or am i doing something wrong?  If someone can offer me some guidance please.  Here is my XML:
    <Configuration>
    <Add OfficeClientEdition="32" >
        <Product ID="O365ProPlusRetail">
          <Language ID="en-us" />
        <ExcludeApp ID="Access" />
          <ExcludeApp ID="InfoPath" />
          <ExcludeApp ID="Groove" />
          <ExcludeApp ID="Project" />
          <ExcludeApp ID="SharePointDesigner" />
          <ExcludeApp ID="Visio" />
        <ExcludeApp ID="OneNote" />
          <ExcludeApp ID="Publisher" />
        </Product>
      </Add>  -->
    <Updates Enabled="True" />
    <Display Level="Full" AcceptEULA="TRUE" />
    <Property Name="FORCEAPPSHUTDOWN" Value="1" />
    <Logging Name="OfficeSetup.txt" Path="%temp%" />
      <!--  <Property Name="AUTOACTIVATE" Value="1" />  -->
    </Configuration>

    When i install Office 365 ProPlus manually (independently of SCCM) I see the prompts (same SCCM Package and configuration.xml file).  This suggests it is suppressed when ran in the system context via SCCM. 
    How does Microsoft expect you to maintain the build versions (running setup.exe /configure XML) if users are unable to view the prompts? This is significant if the user is already in an Office program they'd get prompted with a message to close the app else
    it automatically closes OR fails depending on if you include the ForceAppShutdown switch in the configuration.xml file.
    The users in the environment are not all local admins which is why i cannot run the deployment in the user context.
    I really need some help, anyone?

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

    itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

    I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
    It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
    By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

  • I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    download the 64bit installer,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Unable to install windows 7 on X60 says "no device drivers found"

    Hi all
    I have working lenevo think pad X60 32bit with windows XP installed on it, first time I was able to succesfuuly installed to windows 7 using clean install,everthing works great.
    Then some how my PC got infected  with virus and not able to boot it always says "recover from windows"  but could not succeded, finally wanted to re install again using windows 7 DVD
    First I set boot order from CD but it always booting from infected image from HD and displays same message.
    I have tried another option by getting into command prompt where I did access to my DVD drive and issued setup.exe
    I went couple of instructions and finally stuck where it is unable to install windows 7 by giving below error
    it says "no device drivers found" on the bottom of window and top of the window it says "where to install windows 7"
    On window I think it will expect partition details but window is empty
    I am not sure why my hard drive is not recognizing, I tried some of the drivers from this site but it could not recognize even if I select via browse
    Any one sees this beviour ? which drivers I shoud install ? in order to see my hard drive
    I still found some of my drives under X:windows\system32 but could not selecting those with windows 7 setup

    you can download pc doc http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-56222 and erase your HDD then install win. 7 this download makes a bootable disc & you can run  diagnostics with this disc
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • I download latest software update for itunes and iphone. they successfully download, but then a message comes up saying unable to install as file has been corrupted. what is the cause?

    I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!! 

    The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
    Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
    When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
    Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone)

  • Trying to update iPhone 5.1.1 and it says unable to install update. An error occurred installing iOS 5.1.1

    Trying to update iPhone 5.1.1 and it says unable to install update. An error occurred installing iOS 5.1.1

    If you did the update through iTunes, try going into the Settings App on your iPhone and doing the Software Update in there. The same thing happened to me, and the wireless update worked.

  • Unable to install Full ABAP Edition-Trial

    Hello Gurus,
    I am unable to install Full ABAP Edition-Trial.
    When it comes to more than 80% (status message shows : initializing database connection), after sometime it starts uninstalling.
    Then it shows a message prompting to see the error log. the error log file is as shown below.
    Start of log********************************
    (Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Oct 15, 2006 5:38:14 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Oct 15, 2006 5:38:14 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    End of log****************************
    Can you guys (and gals ofcourse) please help me??
    I have tried it 5 times atleast and everytime i have verified the system requirements.
    I have installed loopback adapter, in other words i have done everything that is specified in the instructions.
    Thanks and Regards,
    Haseeb.

    Hello all!
    Sorry for the late response.
    My installation of sap worked.
    It was the firwewall. I shut them down and it worked.
    <b>Thanks a lot!!!!</b>
    <b>
    This was my error message:</b>
    (Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file D:\SAP\NSP\log.txt for details. (Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    <b>If you have still problems with uninstalling SAP here is the way I did it:</b>
    <u>1.</u>     Delete folders “SAP” and “sapdb”. If you can not delete them, restart
                    your windows in “save mode”. Then it is possible to delete them (I   
                    know it is not a sensitive method J  ).
    <u>2.</u>     After that runt the RegCleanTool with prompt (sapstartsrv.exe –u   --
                    this is the way you have to do it)
    <u>3.</u>     Then you can have a new try for installing SAP
    Thanks again for your help
    Bye

  • Unable to install Full version of Tiger 10.4 or even any part of it!

    eMac 1.25G 256Mb 80G Combo
    Ok. Now that I have a full version of Tiger. I am unable to install it. Have done first aid several times to the drive. Done the one pass of Zero's as well as verified the drive. I have tried the installation approx 7x. It would hang up at different points. 2x i got the Black screen with the 6 different Languages to restart the system. Using Apple Mouse and Keyboard. Oh, and pulling out my hair does not help at all with it working either, i know it now, I did it!!
    Thanks for your help..
    Bruce

    Another possibility: could the 256 MB RAM chip be bad? Faults in just a few memory locations could cause problems during install. Usually, if RAM were suspect, I'd suggest using Memtest in single-user mode, but that's not workable in this case, where there's no OS on the hard drive. Since the odds of happening to have a known-good DDR PC2700 memory chip lying about aren't high, you can at least try pulling the RAM that's in the eMac now, cleaning the connectors, and re-seating the ship, in either the current slot or the other one. There's a small but non-zero chance that the RAM is slightly loose in the slot, and reseating ould help. RAM installation instructions are at eMac - Do-It-Yourself.

  • Unable to install frmwr and data full

    So when I heard about the new Maemo update for my N900 I was excited! So I tried to do a install through the app manager and received the Unable to install not enough free space or whatever the error was. So I too the following steps to "free space" space which I had plenty of.... The following is a list of applications that I had installed:
    maemo geolocation plugin for the micro b browser
    dial central
    duke3d cd version
    worldtv99
    petrovich
    numptyphysics
    duke 3d timidity
    prboom
    mplayer
    angry birds
    kmplayer
    cbrpager
    firefox and mozilla runtime...
    stratagus
    I uninstalled all of these applications except for stratagus.... and these applications :
    Sorry I re-installed K-player before I tried cpitchford's solution
    Still received the same error so I tried what I found in this link: Free Up RootFS
    I tried the following from that link :
    Use apt cache outside of rootfs
    it produced a error message that told me to run
     "apt-get -f install"  or something like that which installed the firmware but it gave me some error I was like w/e .... restarted my N900 and received a Nokia Loading screen and then it did the normal loading start-up
    Check my Firmware and was like WIN!
    But there was a problem lingering txt messages I recieved the following error:
    I was like RAGE!!!!!!
    So a quick google produced this link:  Device Storage Full Message - Unable to Send or Receive Messages
    Big Thanks to: cpitchford
    After I followed cpitchford's instructions I was like **bleep**?!? All my txt history was gone I was like RAGE!!!!! Again...
    I still received that error, so I was like **bleep**?!
    So I un-installed stratagus.... Rebooted my N900 That seemed to fix my problem. But **bleep**?!?
    My text message history was still gone?!? What to do What to do....!
    I backed up  my data via Nokia's backup tool!
    So I restored the following:
    Communication and Calandar
      Rebooted my N900 and that seemed to fix it.
    Other useful information:
    I have a micro sd card in my n900 it was needed for stratagus
    jabber for facebook was configured and used
    gtalk
    Well that's pretty much it the thing I'm looking for is **bleep** happened and what simple steps can I do to prevent this from happening, or what applications do I need to uninstall next time instead of that long laundry list I produced?
    Also cpitchford after I ran your commands is there a way to restore those messages or view them?

    go into your app manager:
    app manager/menu/application catalogs/(go into each catalog and "disable" them all except for Nokia Applications & Nokia System softwrae updates)
    this will open enough space for you to do the update.
    if you still get an update, then you probably have a corrupt file.  but i am 90%+ sure that this will allow you to do the update.

  • /var filesystem 100% full

    I need some help here please, I cleared /var filesystem from all the big files but it's still showing me 100% full, I only manage to get rid of this problem when I reboot the server then /var becomes 3% full, any idea what's causing this to happen.
    I want to avoid rebooting the server in future, should /var/ become full again
    Many thanks

    Some process still has the deleted file open, so the kernel cannot
    free the space occupied by the file(s) you've delete.
    The space is deleted as soon as the process closes the file handle
    (e.g. by stopping / restarting the process).
    The following command lists the process ids / file handles that
    do not have filesystem links but are still referenced by a process
    (you must run it as user root):
    # find /proc/*/fd -type f -links 0 -ls

Maybe you are looking for

  • Error message when I open Logic Express 7

    Hi! When I opened Logic Express 7 today, I got an error message, telling me that Logic had problem with the file com.apple.logic.express.cs. I then searced the net and found out that the problem could be solved if I deleted that file, so I tried that

  • Excise is not captured for all or Second line item.

    Dear Experts, Excise is not updating for all the line items in while making Goods Receipt. while making goods receipt excise is not capturing for all the line items. but excise is captured at header level,its presumed that all the line items are capt

  • Ipad accidentally disabled, but I know my password.

    I have an Ipad mini which is connected to a bluetooth keyboard. I accidentally left the keyboard on and now my IPad is disabled and displaying "connect to itunes". So I tried to connect however it said it could not connect because there is a passcode

  • How to display "age of employee"?

    Hi, Can you pls tell me the procedure to display "age of employee" in IT 0002? I appreciate your helping nature. Thanks Yogi

  • Uploading ESS packages in to NWDS????

    HI, I am new to wd-java.My requirement is i want to customize the tax excemption in ESS.please tell me how to customize the ess business packages in NWDS.Please provide step by step and also tell component usage here.and also tell me FloorPlanManager