Unable to install HP Photosmart Wizard

I recently partitioned my Samsung SSD with both Windows 7 64-bit and Windows 8.1 -64bit. Everything works fine on the Windows 7 partition. However, on the Windows 8.1 partition I have not been able to install the HP Wizard so I can print and scan documents. If I do want to print or scan anything with my Photosmart C4795 printer, I have to log-out of Windows 8.1 and then log-in to Windows 7. The error I keep getting when trying to install the HP Wizard is "This computer does not meet the minimum requirement for available system disk space. The installation cannot continue until this is resolved. Current setting: 0 megabytes. Required: 111 megabytes. Recommended: 111 megabytes." This doesn't make any sense because I have 325 GB of free space on the Windows 8.1 partition. There is also 70 GB of free space on the Windows 7 partition. Does anyone know why this might be happening?

I did what you ask and no issues were found with SSD. I downloaded HP AiO Remote from the Windows store and it allows me to print. However I am still unable scan documents. I saw a couple forums said to download the HP Print and Scan Doctor, so I did. There were no issues downloading and running that software. It finds my C4795 Printer and sees that it is connected wirelessly with the correct IP address. When I run the diagnostics, is comes back and says that the HP software is not install. So I run it and get the same error I have been getting that there is not enough available disk space, however there is almost 300GB of free space. Any other options?

Similar Messages

Unable to install SQL 2012 Enterprise on Windows 8.1 OS

I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
Wizard disappears from this screenshot onwards.
Tried installing from Command Prompt.
Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
Still wizard disappears.

Hello,
I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
support files as well.Refer below link to remove it completely
http://technet.microsoft.com/en-us/library/hh231731.aspx
Similar issue docemented here
If you face any issue below manual method for removing SQL server will be helpful
1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
    2. Backup the registry.
    3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer.
    7. Reboot the machine.
Revert if you face any issue.
EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Windows Updater Not Installing and Troubleshooter Wizard Is Not Working???

I am in need help desperately!
        I have tried to install the Windows 7 latest update since late October 2014 and every time that I have tried it has failed, this is messing with certain programs to either not run such as my Troubleshooter,
leaving me unable to fix the issue, and making my computer to run poorly as well as when I am on Firefox unable to load pages, do downloads, watch movies & TV, or watch videos on You Tube without having to move the mouse around to keep it running and just
freeze the picture on the You Tube and Xfinity but the sound keeps playing though. I am unable to run the Troubleshooter Wizard at all; gives me an error code 0x80131018. I have gone to the forums to find a solution I tried everything possible. Such
as trying to do all the maintenance; disc clean ups, compressing files to save on space, checking the disc drives for errors, defragmenting the drives, try to use the Fix It (MicrosoftFixit.malware.RNP.1343648269423620.1.1.Run, as well as: MicrosoftFixit.ProgramInstallUninstall.RNP.1343648269423620.2.1.Run,
as well as: MicrosoftFixit.wu.FISC.1341772369343897.1.1.Run,   and: MicrosoftFixit50123) all the these would not help.
        I also tried to run what information I received from viewing options from the Error Code 0x80131018 and all the HP Support Assistant and Windows Help and Support. These are some of them; SCUDownloader,
Windows6.1-KB947821-v34-x64,   HPSupportSolutionsFramework-en-11.51.0048,   HPSupportSolutionsFramework-11.51.0048,   HP CoolSense Technology - sp65424,   HP Notebook System BIOS Update (Intel Processors) - sp55068,
HP Power Manager Utility Software - sp55151,   HP On-Screen Display Utility - sp55152,   HP System Diagnostics UEFI - sp52407, and    Intel Rapid Storage Technology Driver - sp55101. All these with running the maintenance,
I also installed Boost, also ran the scans through my Norton Security, and so much more to try and fix this problem, I just can't remember everything that I tried I have been working so hard at solving this problem since of the effect of how this Windows Updater
failing at updating and Troubleshooter not working to leaving me unable to find and fix these issues.
           I am a Graphic Design Artist and I am pretty computer savvy but I am at a loss on this . If anyone has any advise on these issues please help me ASAP, I use my HP everyday and it is important for
me to have it for work purposes, concepts and so much more. My Mother got this computer for me when I graduated from college in 2012 for my graduation gift so I can do what I do.
Thank you so much for your help in trying to get this resolved without having to take it into somewhere and pay $$ that I do not have.

I recently had a similar problem - Windows 7 Ultimate. Apart from updates not installing and troubleshooters not running I started getting crashes and BSOD's
I checked that my Cryptographic services was set to auto (it was)
Press the 'Windows key" and and key "R" together   to launch the RUN box. Type
services.msc in the box and press Enter. It'll open Services Manager.
Scroll down to "Cryptographic Services" in the list. It should be set to Auto ( mine was)
I then checked my Windows updates to see when the problem started
Taking the bull by the horns I deleted the last 20 updates installed.
I restarted the computer and was amazed to find the troubleshooters working ok
I downloaded the Windows updates and installed them 5 at a time checking the troubleshooter after each batch. Everything was ok .
I can only assume the troublesome update was not re-offered or the one that installed itself was corrupt.

Installing HP Photosmart 7520 all in one printer software

My new HP Photosmart 7520 will not install on my Dell PC. I have the 32-bit Windows Vista OS. When installation begins I immediately get the error message: "Key not valid for use in specified state". I've tried installing the CD and the software from HP on-line, all several different ways. I 've used the troubleshooting download from HP but both methods do not solve the installation problem. I've temporarily disabled the firewall. I've done disk clean-up and defragmenting. I've restarted the PC more than a dozen times during my efforts. Even Microsoft Windows can't install all the software from updates - only the fax portion. If I can get past the point where the error message occurs I think the software will install.
I hesitate to try the Geek Squad. My experience with them is that most of the geeks aren't competent and it's a crap shoot getting assigned one that is. They will be my last resort.
Has anyone had this problem? Does anyone have a solution?

Hey @jimlg ,
Welcome to the HP Forums!
I understand you're unable to install the printer drivers for your Photosmart 7520 printer.
The error you have listed is a Windows error and not attributed to the printer software. You can confirm this with the fact the error occurs when trying to install from Windows update bypassing our installer.
You may want to try following the suggestion in this thread made by @Gemini02 which seems to help resolve the issue for some users experiencing the same problem: Re: key not valid for use in specified state.
Let me know if that helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Unable to install C4500 HP printer on Windows 8

I just bought a new computer (acer) and have installed the photosmart c4580, which prints fine with a USB cable, but am unable to find instructions on how to use the printer wirelessly on this laptop...can you please assist. mark
This question was solved.
View Solution.

Hi,
Please run the following program on your Windows 8 machine:
ftp://15.217.49.143/pub/softlib/software12/COL44840/mp-115766-2/hppiw.exe
It will ask few question and install drivers for you. You need to connect to Internet to be able to run.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to install OS 2.0

Can anyone help me here? I already tried for so many times downloading OS 2.0 but the result is still the same, it always say unable to install OS 2.0. Any idea?

First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Unable to install Full ABAP Edition-Trial

Hello Gurus,
I am unable to install Full ABAP Edition-Trial.
When it comes to more than 80% (status message shows : initializing database connection), after sometime it starts uninstalling.
Then it shows a message prompting to see the error log. the error log file is as shown below.
Start of log********************************
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 5:38:14 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:14 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
End of log****************************
Can you guys (and gals ofcourse) please help me??
I have tried it 5 times atleast and everytime i have verified the system requirements.
I have installed loopback adapter, in other words i have done everything that is specified in the instructions.
Thanks and Regards,
Haseeb.

Hello all!
Sorry for the late response.
My installation of sap worked.
It was the firwewall. I shut them down and it worked.
Thanks a lot!!!!

This was my error message:
(Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details. (Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
If you have still problems with uninstalling SAP here is the way I did it:
1. Delete folders SAP and sapdb. If you can not delete them, restart
 your windows in save mode. Then it is possible to delete them (I
 know it is not a sensitive method J ).
2. After that runt the RegCleanTool with prompt (sapstartsrv.exe u --
 this is the way you have to do it)
3. Then you can have a new try for installing SAP
Thanks again for your help
Bye

How to Install HP Photosmart Ink Adv K510 in Mac Book Air?

Does anyone know how to add printer in mac book air? we have HP Photosmart Ink Adv K510 but i dont know how can I install it in our macbook air. Our Printer is connected through WLANand even our mac book is connected in WLAN. Please Help.

Hi gachy1,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to install the printer on Maverick.
I will be happy to help you.
I have provided the URL for setting up the printer with the Apple Software Updates.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Make sure when you add the printer it shows the printer's name and not Airprint.
(you might have to click the dropdown to select the printer's name)
This document shows you 3 different ways you can scan on the Maverick.
How to Scan: OS X v10.9.
Hope this resolves your issue.
Thank you for posting on the HP Forums.
Have a good day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install HP 7610 on pcs

I'm unable to install my printer any more on any pc.The printer is HP 7610.The printer connect correctly to my wireless router, i manage to ping the printer from pc, i manage to access the web page of the printer from the browser.When i try to setup the printer, the driver do not automatically find it over the network.I try to insert manually the IP, and the driver again do not detect anything, and tells me to run the troubleshooing wizard (that do not solve anything). So i try again and i/o inserting manually the ip i insert the host name, this time the setup device starts , but finishes after 10 minutes saying that the setup failed. I though a problem with wireless, but if i try to print from my iphone and ipad the print out is immediately executed. I tried also to run also the print doctor.. and it run without problem and can find the printer, and it reports that there are no error. I tried :- uninstall driver and reinstall , same problem- fresh install of OS ( both windows 8.1 and windows 10) same problem  the printer is out of warranty, but i don't think it is broken.i don't know what to do ... any suggestion ? Fabrizio

Hello , Welcome to the HP Support Forums!
I understand that you're experiencing issues installing your wireless HP Officejet 7610 Wide Format e-All-in-One Printer on your Windows 8.1 computer as the printer is not detected during the installation. I would like to assist you today with resolving this installation issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. Because you are able to ping the printer and open up the printers Embedded Web Server we know that your printer and computer are communicating over the wireless network. Therefore, I believe that there is either a background program running on your computer that is blocking the two way communication between your printer and the computer during the install. Or, there is an HP Software and Driver conflict occuring within the HP Installer. Therefore, to start troubleshooting I am going to have you perform some standard wireless installation troubleshooting steps to help us to isolate and resolve this issue. Please follow the steps below.   Step 1: Remove Driver: Even though the installation is failing, there is a chance that a portion of the software and driver package made its way onto your computer. For troubleshooting purposes it is crucial that we have a clean slate to work with. Because of this I am going to have you remove every trace of your HP Officejet from your computer prior to performing the fix. Open your Start screen by selecting the Windows icon on the bottom left of your computer screen, or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl buttonUnder the Start screen type Programs and Features. Click Programs and Features to launch the window.In Programs and Features a list of programs installed on your computer will populate. Please scroll down this list and look for your HP Officejet. If you see your HP Officejet please select it and choose Uninstall. Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please close Programs and Features.If you do not see your HP Officejet listed, please close Programs and Features.Next, please open your Start screen againThis time type Devices and Printers. Click Devices and Printers to launch the windowIn the Devices and Printers window look for your HP Officejet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Officejet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step.   Step 2: Clear Temp Files:  Open your Start screen by selecting the Windows icon on the bottom left of your computer screen, or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl buttonUnder the Start screen type Run. Click Run to launch the Run dialogue boxIn the Run box type %temp% and click OKWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling Bin.  Please proceed to the next step  Step 3: Run MSCONFIG (Disable):   Open your Start screen by selecting the Windows icon on the bottom left of your computer screen, or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl buttonUnder the Start screen type Run. Click Run to launch the Run dialogue boxIn the Run box type msconfig and click OK
When the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup Items
Click the Services tab. Check the box at the bottom for Hide All Microsoft Services
Select Disable All
Select Apply and OK
Restart your computer when prompted When your computer comes back ON, please proceed to the next step.   Step 4: Install Device: Please click here to download the Full Feature Software and Driver package for your printerOnce the download is complete please follow the onscreen prompts to install your wireless printerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. If your product now functions fine, please proceed with the final step below to enable the background programs on your computer.  Step 5: Run MSCONFIG (Enable):  Open your Start screen by selecting the Windows icon on the bottom left of your computer screen, or by selecting the Windows key on the bottom left of your keyboard, to the right of the Ctrl buttonUnder the Start screen type Run. Click Run to launch the Run dialogue boxIn the Run box type msconfig and click OK
When the System Configuration Window opens select Normal Startup
Click Apply and OKRestart your computer when promptedWhen your system comes back up please test printing and scanning again. Should your product now fail to function properly then there is a background program running on your computer that is blocking your wireless printer like a 'threat' trying to access your computer. Please respond to this post with the results of your troubleshooting. I look forward to hearing from you. Good luck!

Unable to install hp all in one officejet x64 drivers windows 8 it

unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

Hello louvallee,
If you had upgraded you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step#
Else
1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Unable to install rollup4 for Exchange 2010 SP3

Hi,
I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
I know that this process will take some time to complete but I have waited 10 hours.
I've tried to reboot the server and restart the setup.
Exchange is functioning perfectly otherwise.
Any help would be greatly appreciated :)
/Søren Emig

Hi,
I recommend you check if the anti-virus has been disabled before you start the upgrade process.
If you didn't ,the update could fail or take an extended amount of time.
Also, disable all other third-party apps/plugins that might be installed (like backup agents).
In addition,the following articles for your reference:
Install the Latest Update Rollup for Exchange 2010
When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
The installation takes a long time to complete.
You receive the following message during the installation: Creating native images for .Net assemblies
When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
To work around this issue and to reduce installation times, turn off the
Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Clear the Check for publisher’s certificate revocation check box, and then click
OK.
After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
Generating NGEN images takes longer than expected
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Computer is unable to find hp photosmart 7510 on network.

Windows Vista unable to detect HP Photosmart 7510 during new installation. The printer is connected to the same network as the computer. The computer is wired to the network and the printer is wireless. I have downloaded the driver and other software from the website with no improvement.

Hi,
During the installation process, it should ask you: can you see the antenna symbol on the printer AND the signal strenght. Did you see those and click yes ? The IP address should also display on the printer control panel. Last night, I installed my 7510 printer to one of my Windows 8 laptop and it was very easy, like walking in a park.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to install software, it stopped almost at end and even didn´t asked for connecting USB.

product name: HP Photosmart all-in-one B010a
operation system: windows 7 64-bit
I was unable to install product, it didn´t asked me connect usb, and stopped almost at the end. I tried solve the problem with HP installation error - windows 7. I installed updates and so on, but in middle of new installing it wrote fatal error.

Hi b ,
Thanks for your response.
There were no accounts in my local security settings so I added SERVICE;Ron and it recognised them both .
To update , I decided to reboot and try the install one more time and Quicktime and itunes installed successfully , ipod appeared to but when I connect my nano I get an error message that the software didn't install correctly . I uninstalled it and reinstalled , ran ipod updater but it's still the same . When I plug in my nano itunes doesn't recognise it and I keep getting a message on my taskbar telling me that this device will run better in a USB 2.0 port but that's what I'm using !!?? . Any ideas ? .
T.I.A. Ron

Unable to install itunes in windows 7 64 bit - hanging

Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)

Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64

I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.

Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.

Unable to install HP Photosmart Wizard

Similar Messages

Maybe you are looking for