Unable to perform Service Entry Maintenance

Hi experts,
Currently i have a PO line with Account Assignment "A" (asset). The G/L account, Asset#, WBS element and Earmarked fund fields have been maintained.
But when performing Service Entry Maintenance, there is a message, "function code cannot be selected" appeared, resulted in unable to perform the service entry.
However, the same G/L account, WBS element and Earmarked fund when used on another P/O, was ok, able to perform service entry.
Appreciate if anyone can offer any explanation or solution to this, thanks.
JL

Hi
Pls. check PO is released or not ?
then check field Ser Based IV of Invoice tab at item level is flagged or not?
If helpful...
Regards,
Rajeev

Similar Messages

  • Reminder to perform Service Entry Sheet

    Hi All,
    May I know is there any existing reports that I can utilise to send reminder to user to perform Service Entry Sheet after services have performed?
    Thanks.

    Dear,
    I have two solution for u.
    1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
    2) Create service purchase order - ME21N for only one line item.
    And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
    Than create one service entry sheet for purchase order.
    So you can create one service entry sheet for all line item of services.
    Note: - Use option 2 for easy process.
    Regards,
    Mahesh Wagh.

  • *Unable to create Service Entry Sheet.*

    Hi,
    Iu2019m trying to create service entry sheet for a service PO but all the item level fields in ML81N screen are appearing in display mode (non-editable) also I cannot see the u201CService Selectionu201D button. So Iu2019m unable to insert/select the service detail and cannot create the entry sheet. If I use the menu path Edit->Service Selection, still cannot adopt services and system gets busy for a substantial period and eventually timed out.
    Please helpu2026
    Iu2019m using ECC 6.0
    Thanks, Pratap

    Service PO: Intangible good that is the subject of business activity and that can be performed internally or procured externally (outsourced).
    -     Services are regarded as being consumed at the time of their performance. They cannot be stored or transported.
    -     Examples of services include construction work, janitorial/cleaning services, and legal services.
    Steps involved in Service PO:
    1.     Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
    2.     Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
    Without Validation, Acct. Category Reference & Service Category Description.
    3.     Define Number Ranges for Service Category.
    4.   Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
          Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.  
    5.     Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
    6.     Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
    7.     Then do MIRO from PO reference u2013 Service Entry sheet.
    8.     Collective Release of Service Entry Sheet u2013 ML85
    Organizational Status for Service Category: The organization status indicates the areas in which service master records are used.
    Service Category: The service category is the most important criterion for structuring service master records. It provides a default value for the valuation classes. Service master records can be assigned to number ranges on the basis of the service category.

  • Unable to reverse Service entry sheet posted in earlier prds

    Hi All,
    We are unable to reverse the service Entry sheet created via Shipment cost document. As the Shipment cost document was created in the month ofJanuary 2011. And now that period is closed. But I am looking the way wherein by changing the posting date to current month date. So that system should allow me to reverse the cancellation of service Entry sheet
    by ticking the cancellation tick mark under the Settlement Tab.
    I need inputs for reversing it in current month. in the similar lines. as we reverse the service entry sheet in ML81N and have an option to change the Posting date. But in VI02, Date Cancellation field is greyed out and we are unable to tried it out.
    So basicaly how to change the posting date in shipment cost document, sothat cancellation should happen in date which is being entered by user.
    Thanks
    Nitin

    Hello there,
    I had the same problem yesterday and we were able to do the reverse of the ship cost provision and the repost using posting dates from this month. Here is what we did:
    For reversing using a different date.
    Go to VI02, double click on the position, go to "settlement" tab and select "Cancellation" box, then use the menu bar in the "Item" -"Redet. settlement date option" , you will have an information pop up message "Redet. settlement date not possible - account
    already assigned to item" ,  just hit enter and the "date cancellation" field will be now available to modify. Put the date you desire and save.  If you go to the document flow, you will notice the cancellation is done and the posting document is in the FI period you desire.
    To repost the same shipment cost with the new date (current period).
    Go to VI02, double click on the position, go to "settlement" tab , Hit the button "delete account assigment" and the settlement date field will be available for change. Modify the date, save and leave the transaction.
    Enter again and from the menu go to "Item - account assigment", and you will notice the system already redetermine the account assigment, go back (F3) and the "Transfer" field is not available to select and save.
    Then you have the new service acceptance posted with the current period.
    I spend some time and couldn´t find the answer in other websites, now that i have the answer, I hope this help somebody else,
    Rgds,
    Sara

  • Unable to save service entry sheet in ML81N

    Hi,
    i have an issue: When saving the entry sheet in ML81N there is a popup that says u201CNo message record could be found for output of messageu201D.
    why it has come. due to this popup message i could not create service entry sheet. if i want to remove the default printer in Entry sheet where i should do.
    kindly advise me.
    BR,
    sss

    will tell u later.

  • Account determination error during service entry for service PO

    Dear Experts,
    This about service PO. I created PO # 4501517101 & wanted to perform service entry via t/code ML81N. But I'm getting error "147 Account determination for entry OP01 FR1 OP01 not possible"
    Appreciate if could anyone assist me on this issue. TQ.
    rgds,
    nantha

    Please correct the assignment in OBYC and also in this error itself u can see one icon of proceed.If you will click on Proceed, then it will take u in to OBYC, where u have to do the corrections.

  • Service Entry Sheet

    Hello Friends
    This is Regarding Service Entry Sheet
    Service Purchase Order generated and as per my knowldge iin all ways it is correct.
    While making Service Sheet, it is unable to capture service entry lines. There are no items.
    Could you please inform what could be the reason?
    Best Regards
    Vijayakumar TVN

    Dear Freinds
    Thanks for all your efforts and information. But the actual problem is as follwes.
    Sloution arrived.
    At the time of Service entry sheet creation, (Thru ML81N) - Select Other Purchase Order - Create entry sheet - Enetr Short text - Select 'Serv Selection' - Pop up window will appear - By default radio button will be on Purchase Order but in this case Radio button selection on From current specs.
    That is the issue.
    Best Regards,
    Vijayakumar TVN

  • What is the use of service entry sheet in plant maintenance module.

    Hi Expert,
    I want know about, What is the use of service entry sheet in plant maintenance?
    Regards,
    Ram Rathode

    Hi dear,
    Service entry sheet concept is used in all the modules.
    Service entry sheet is created to do the service confirmation and to pay the vendor for the services which he has performed.
    Based on the service entry sheet invoice is booked by Finance.

  • Query related to Service Entry Sheet for maintenance order

    Dear Gurus,
    I am little bit confusing while entering SES for maintenance order,
    Do we need to enter both Maintenance Order# & Cost Center# in Account assignment tab of SES?
    What is impact of entering both in SES?
    What is standard procedure of accepting services for maint order?
    Thanks in advance.
    Regards,
    Amol.

    Hi Amol
    Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
    But depending upon settings, you can change account assignment values such order 1 to order 2
    If there are requirement that SES can created for  Account assignment F or K. I recommend you to use following approach
    1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
    2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
    3. Perform SES w.r.t to Release Order.
    Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
    Thanks,
    Jagdeep

  • Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

    Hello,
    I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template. 
    So, I now want to try and update my service template.  However, whenever I try to do anything with it, in the services section, I receive the error:
    Unable to perform the job because one or more of the selected objects are locked by another job.  To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object.  ID 2606
    Well I tried that and there doesn’t seem to be a job locking the object.  Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all.  I tried running the following query in SQL:
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
    I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
    Can anyone help?

    No one else had this?

  • Unable to create database entry in the directory service. - TNS-04

    We run into this error when we tried to register an Oracle 10.2.0.4 database with OID server (10.1.4.3):
    Unable to create database entry in the directory service. - TNS-04409: Directory service error
    We use Oracle DBCA to register to the OID. Both Oracle database and OID server are all running under Sun Solaris environment.
    In the meantime, I found these errors in the oid logs:
    oidldapd01.log:
    2009/07/13:21:15:47 * DispatcherListener:2 * ERROR : gslsflAcceptConnAndSend : OS 2 : Unable to accept New TCP
    connection
    Any ideas?
    Thanks
    Naiying

    Hi,
    Thanks for update.
    No, didn't find DSCC agent logs get updated when I have the pop up.
    C:\dsee7\var\dcc\agent\logs
    In the glassfish server log, I didn't find new transaction when I hit the issue
    C:\glassfish3\glassfish\domains\domain1\logs

  • In Printer Services box, i get the message "unable to perform the operation"

    HP Officejet H470wbt.  Using via bluetooth.  i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
    <br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • In printer services error message says "unable to perform this operation"

    when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
    I have deleted and reinstalled my printer.  I have downloaded the lastest driver--all to no avail

    Please read this post then provide some details.  What printer model? What operating system? 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Unable to insert new row on service entry

    Hello,
    We are unable to insert a new row on a Service Entry. The issue appeared after we did a EHP5 upgrade. How can this be fixed, so we can insert a new row under the basic data tab in the service entry?
    Thanks!

    It needs to be adopted over from the PO sub line items. If you have 1 PO line item, and within that line item there are multiple sub line items, then those will be carried over as new line items on the Service entry sheet. If you have just one line item and one sub line item, then it will only be 1 line item on the SES... I dont think you can just add a line item on a SES without reference to a PO (from a standard perspective - although i could be wrong)>
    Thats if I understand you correctly.
    Thanks

  • 'Service this device' gets 'Unable to perform the operation' Deskjet 6940

    Installing this software on several different  XP SP2 boxes. The install does fine (although very long) and I can print to the printer. However, when I go to the printer properties and select Preferences and the Services tab, I click the "Service this device" icon and get only "Unable to perform this operation". I get the same results on 3 different computers. I tried installing the software from the CD, both USB connected and network connected. I also downloaded the latest s'ware from the HP site and got the same results.
    Any ideas here? Without this function I have no way to clean the print heads and such later on, even though the printing works OK.
    The only reference I could find previously by searching said that it happens when running the Firefox browser. I'm not doing that.

    After i've set Internet Explorer as default browser it Works !
    What a strange solution

Maybe you are looking for