Unable to print anything after upgrading to Leopard, Ilife 08 and iwork 08

After installing these upgrades I am unable to print anything even test pages. Anyone got any ideas?I have tried deleting the printer and reinstalling checking for new drivers etc.

What printer are you using? What happens when you try to print? Does this happen with all applications?

Similar Messages

  • I'm unable to install anything after upgrading to Snow Leopard

    I've upgraded to Snow Leopard and after that anything I try to install stops at the Install button. No error messages. No crashing. Just don't install. Even the system upgrade didn't install...
    Any ideas?

    this may happen if you are using a custom keyboard layout. delete the file /Users/username/Library/Preferences/ByHost/com.apple.HIToolbox.* and log out/in. then try installing something.

  • Can't use Airport Express after upgrading to Leopard

    I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
    I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
    I am open to suggestions to try a few things to get it working, so any help is appreciated.
    Message was edited by: a j

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Motion screen is completely black after upgrading to Leopard

    Hi,
    I have opened IDVD for the first time after upgrading to Leopard and it does not work correctly anymore.
    The motion screen is in black and does not show anything (while you can hear the sound of the theme selected)
    This happens with already created projects and new projects
    All since upgraded to Leopard
    It is possible to see a movie in an already created project, if you are able to go through the menuscreens and select the movie without actually seeing anything. Than the movie is shown correctly.
    I work with the latest version of Leopard and IDVD, all on a macbook
    Hope you can help !!
    Thanks a lot
    Marco
    (A recently convert from windows to Mac, and a very happy one.)

    Hi,
    Thank you very much for your quick answer.
    I have no issues with laptop being to warm as it happens just after starting to work the computer
    I have reinstalled IDVD, made no difference
    I have run the apple´s updater.
    No external FW or USB connected
    Only two plugins for QT, both standard
    I have not tried switching accounts, as I only have one account
    Enclosed the info of the graphics card
    Intel GMA 950:
    Chipset Model: GMA 950
    Type: Display
    Bus: Built-In
    VRAM (Total): 64 MB of shared system memory
    Vendor: Intel (0x8086)
    Device ID: 0x27a2
    Revision ID: 0x0003
    Displays:
    Color LCD:
    Display Type: LCD
    Resolution: 1280 x 800
    Depth: 32-bit Color
    Built-In: Yes
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Display Connector:
    Status: No display connected
    Hopefully you can help !
    Thanks a lot
    Marco

  • Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

    My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
    Can anyone suggest anything?
    Thanks.

    I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
    Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
    Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

  • Sound input (line-in) not working after upgrade to Leopard

    I have upgraded my iMac Intel Core 2 Duo (white plastic frame version) to Leopard on Friday when it released. The upgrade process went very well with one MAJOR exception: Audio input through "Line-in" connection does not work anymore. I have tried everything that comes to mind so far from rebooting, to unplugging and replugging, to checking back all system settings, etc. Nothing works. At this point, I can't use my headset anymore for making calls with Skype or using voice chat in games. I would seriously need some help as I refuse to have paid $129 only to have Apple themselves break something in their products.
    For this reason, I have to currently consider Leopard a failure. Reason being, in MS Windows or Linux, there always is a way around to make things work... I can't find anything at all with this release of the OS.

    The OP reported their line-in input "broke" after upgrading to Leopard, however my MBP stopped recognising input from the mic on my headset a few weeks ago when I was still running Tiger. This might possibly indicate that the change in OS X's handling of the line-in input was present in a Tiger update, but I can't remember the exact correlation between the dates of my last update and this problem. All the same, I'm pretty annoyed that a headset that worked perfectly for several months is now suddenly unusable without a USB adapter.
    Prior to stumbling across this thread, I visited two Apple stores, who both tested with an output from an iPod and told me that the input was working fine, leading me to buy a brand-new headset (even though I'd tested other working headsets without success) which, naturally, produced the same results.
    Seems to me that the hardware is fully capable of processing a mic input through the line-in port, as it's never had any problems with any unpowered source until recently, so Apple must surely be able to undo the change they made?

  • Having Font Issues In Safari After Upgrading To Leopard

    So...i'm having some font issues in Safari after upgrading to Leopard....
    It works fine on my desktop but not on my laptop. They both run on Leopard.
    Also, it works in Firefox but not Safari.
    Here's some screens of what it looks like. This only pertains to any site that uses this font and it isn't uncommon, (sites like google, yahoo, and the WoW Forums)
    http://i21.tinypic.com/1z6cwsx.jpg
    zoom in to see what i'm talking about, it's really messed up on the full screen
    Font settings:
    http://i24.tinypic.com/x2rucx.jpg
    Another pic of what it looks like on Google:
    http://i24.tinypic.com/rmsjz8.jpg
    Anyways...any idea on how I can fix this?

    I disabled the stencil font and deleted it. No luck here.
    I ran a font validation check and this is what showed up, don't know if this means anything.
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid.jpg
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid2.jpg
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid3.jpg
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid4.jpg
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid5.jpg
    http://img.photobucket.com/albums/v649/llamaboy2/fontvalid6.jpg

  • Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Hi bdtcop,
    I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Lost Deskjet 5740 printer driver after upgrade.

    Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

    Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
    So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

  • I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
    Clinton

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Final Cut Studio license invalid after upgrading to Leopard?

    Hello,
    After upgrading to Leopard 10.5.1, Final Cut Studio v5.1.4 and its companion apps like DVD Studio 4 do not recognize my FC Studio License as valid. I input the license key and it says:
    "Licensing Error
    This application cannot continue because the licensing data is corrupt."
    I am a licensed user via the FC Studio Crossgrade since 2006 and all has been fine with Tiger before Leopard.
    I have used Disk Utility to "repair permissions". I have removed the FC files from the Preferences folder to give it a clean start.
    PERHAPS A HINT?:
    So I tried to re-install FC Studio 5.1 from the FC Install DVD and I get this message after inputting the key:
    "Alert
    Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I have Administrator privileges on this account and I even tried to install it as 'root' and the same error occurs.
    Is there a file that I need to change permissions on?
    THANKS for any help here! And happy holidays.
    Bonafide

    Hi,
    Unfortunately there is also an issue with installing FCS2 on a brand new installation with Leopard and this licensing error.
    "Alert Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    This also occurs, apparently, that if you are logged in with an Active Directory user with Admin privileges it still will not let you install the product keys.
    This is much the same as a problem with Adobe CS3 products, only the updates work when you are logged in with a local admin - not an Active Directory Admin.
    Both these problems are really really annoying for those on corporate networks - such as myself.
    For my problem, I had to log out as my AD account, login as a local admin and then install the software. .
    KJ

  • After upgrading to Leopard: Leopard crashes because of "SFWordProcessing"

    Hi!
    Sorry for this double posting, but actually "rachelynne" posted here problem in the iWeb-Forum.
    http://discussions.apple.com/thread.jspa?threadID=1221556&tstart=0
    So, this is my problem: If I type any letters into a pages document, i might suddenly crash with the same "SFWordProcessing"-Problem like rachelynne already described. This first occured after upgrading to Leopard.
    Maybe you need the crash report?
    I am not able to continue working with Pages. Please, help me, Apple =)
    Fadi

    I GOT IT!!!! after many frustrating hours, i have figured it out. at least the problem i think you have, and that i had. when you plug in your iphone, and iphoto auto-launches, go to the prefrences in iphoto, and at the bottom of the "general" tab, the "connecting camera opens..." drop down needs to be set to "NO APPLICAION" or whatever. in other words, you want iphoto to do nothing when a camera is plugged in. then unplug iphone, and plug back in. you still may need to launch itunes manually, but it will be there.

  • Keyboard issues after upgrading to Leopard

    Seems there's been quite a bit of discussion about this topic already but it's been confined to laptops and I haven't seen a solution yet. I'm seeing the same problems on a desktop computer using either a wireless or USB keyboard.
    After upgrading to Leopard, my keyboard would occasionally stop responding to keystrokes. I have seen this happen on both an Apple USB keyboard and my Logitech wireless keyboard. With either keyboard, the letter and number keys would stop responding but keys like the CapsLock and Delete keys would still work. I have seen this happen when using Mac Office 2004 (Excel and Word) and Safari. With Excel, when the keyboard stops responding, if I click on a different cell, the keyboard comes back. I did update to 10.5.2 and I do have the latest version of the Logitech software but the problems still persist.
    Strangely, I have only seen this happen on my MacPro but NOT my MacBook. There is a difference on how each machine was upgraded to Leopard though. On my MacBook, I did a clean install of Leopard on a new hard drive and then migrated my docs and apps from the old drive. On my Mac Pro, I did an upgrade installation over Tiger. Fortunately, I cloned my hard drive prior to installing Leopard so going back is an option and so is doing a clean install followed by a migration which is what I did on my MacBook.
    Is there a fix for the keyboard problems? Am I going to have to downgrade back to Tiger?

    Thanks for posting this. I thought I was alone in the universe. I have the problem with my mini, which came with Leopard installed. The USB keyboard will stop working in Word or Entourage ('04) and I have to close and reopen the document to get the keyboard going again. Thankfully, my mouse still works when this happens, so I can use it to close and save.
    It seems to sometimes be triggered when I switch between applications, but I haven't been able to replicate it consistently. It is particularly bad when using find in Word. The find window will go dead and I have to close it and reopen it to do another search. (Though interestingly, I don't have to close the Word doc.)
    It's irritating.

Maybe you are looking for