Unable to "save as" WAD report due to error Namespace '/BIC/' must be set to changeable (transaction SE06)

Hi All,
We have a WAD report for whcih we are not able to execute due to some wrong properties assignment, since we dont have change authorisation, so we tried to create a copy of WAD report by SAVE AS option and change the properties correctly.
But when doing SAVE AS we are getting below error.
Namespace '/BIC/' must be set to changeable (transaction SE06)
We dont have authorisation to SE06, although iam not sure what needs to be done in SE06.
Is there any other way to create a adhoc/copy of WAD report so that we can chage the properties of the report and can test it.
And what exactly SE06 tcode is used for??
Please advise.. thank you

Hi,
/BIC/ is the name space(Prefix) given for customer defined objects. you can understand this in fact table or DSO active table's naming difference between a standard cube and a custom cube.
in SE06 you will get option like in below picture,
there you can set/BIC/ as modifiable.
unless you set this to modifiable, you cannot create custome object in you system.
-Sriram

Similar Messages

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to error 3

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.

Hi, Milanista5
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Unable to save Infoview pdf reports in Windows Vista

Good morning,
My coworker needs to be able to save Infoview pdf reports from her Windows Vista PC, but she is presently unable to. She was able to save the reports fine previously from the Windows XP PC she used to have.
Following are the steps taken to arrive at the problem:
1) On a Windows Vista PC, browse to: https://wyinf.hostams.com/InfoViewApp/logon.jsp
2) Logon with appropriate credentials.
3) Navigate to: All > Public Folders > WY WOLFS Reports > Double-click on one of the listed Adobe Acrobat .pdf reports.
4) Now the pdf report is open within the web browser, and "BUSINESSOBJECTS INFOVIEW" is the title above the pdf report.
5) Click on the "Save" button - Nothing happens or appears. (After clicking on the save button, a window should launch that lets you save the pdf file to a desired location. This works fine on Windows XP)
If any of you know of any workarounds to this problem or any settings I could adjust to fix this, please let me know.
Thanks for any help,
Tully

Hi Raveesh
Apologies but we do not have certification done on Vista yet.
Others have replied on your other thread about connections
Regards
Tim

Unable to save the Crystal Report with Dynamic paramters in Enterprise

Hello,
We are not able to save our Crystal Report with dynamic parameters in Enterprise, Error message as follows :
"Failed to read data from report file C:\DOCUME1\...\crw{...}.rpt. Reason : Failed to read parameter object"
CR Developer Version 12.0.0.683
help us in this regard..
thanks,
Narasimha Murty

Hello,
The error message occurs because the user or group who created the LOV does not have the appropriate rights in Business View Manager.
Try this hope its helps
To resolve this issue follow the steps,
1.Log on to Business View Manager as administrator.
2.Click View > Repository Explorer.
3.Right-click Dynamic Cascading Prompts. Click Edit Rights.
4.Click the appropriate user or group receiving the error.
5.Click the Granted option for the right to View, Edit & Set Security rights.
6.Click OK. Close Business View Manager.
The user or group is now able to save a report with dynamic parameters to Enterprise.
Regards,
Vinay

Ringtone unlimted app: I'm unable to save ringtone to desktop. Receive error message "you do not have enough access previlages"

Iphone 4S iOS8.1.3
G6 1-321NR Notebook Windows 7 Home Premium
Ringtones unlimted app
I select a ringtone to save to desktop as instructed, only I receive an error message indicated unable to save ringtone "you do not have enough access previlages" What is this? How do I resolve this issue?
Thank you

Deggie: You are a genius!!!
Spot on! It was a hardware conflict. Followed your instructions, changed the drive letter and lo and behold job done!
Thank you so much!
Incidentally none of my local iPod Genius Help guys could sort the problem out when i brought it round to them yesterday. The best they could do was to suggest 'restore' with it's 'wipe everything' implications.
i doff my cap to you.
Cheers mate!

Unable to save the webi report results in CSV file in XIR2 environment

Hi Team,
We have one WebI report in BOXIR2 version and it fetching nearly 76+ records in the report. The report is running fine without any issues and when i am trying to export the results into CSV file we are getting the error msg (Maximum Binary file size exceeded WIS30271). The file size is more than 80MB and hence it throwing this error. I have checked the Maximun Binary File size that is set in CMC and it is set to 80MB.
When i ran the same query in the database and exporting the results in to csv file the file size is under 80MB. I would like to know the reason why there is a difference in the file size when running the query manually in database and exporting in to csv file and to export the results set in to csv through business objects.

Below are the possible causes to get this error message:
1] When a large Web Intelligence report is exported to CSV format, we get error: Max Binary file size limit exceeded. The document is too large to be processed by the server. Error WIS 30271
Cause
This error message appears because BusinessObjects Enterprise allows documents to be saved with the limit specified for Web Intelligence Report server settings in the Central Management Console(CMC).
To resolve the error follow the below steps:
- Login to Central Management Console (CMC) using BusinessObjects Enterprise "Administrator".
- Navigate to "Home >> Servers".
- Click on "Web Intelligence Report Server" to open its properties.
- Increase the "Maximum Binary File Size"(Default value=50 MBytes; Maximum value = 65535 MBytes).
- Click on "Apply" and then on "Update".
- Allow the Web Intelligence server to restart.
2] In Web Intelligence, when attempting to save a report to Excel or Portable Document Format (PDF), the following error message appears:
"Max binary file size limit exceeded. The document is too large to be processed by the server. Contact your database administrator. (Error: WIS 30271)".
Cause:
This error message appears because Business Objects Enterprise allows documents to be saved up to the limit set for Web Intelligence Report Server in the Central Management Console (CMC). The default file size limit is 50 megabytes for binary file types like PDF and Excel.
To resolve this error message, you will need to increase the Max Binary file size value.
1.      Open the CMC.
2.      Browse to Servers
3.      Click on your Web Intelligence Report Server.
4.      On the Properties page, increase the Maximum Binary File Size.
5.      Apply the setting and allow the Web Intelligence Report Server to restart.
Increasing these values too high could impact Web Intelligence performance when users attempt to save excessively large files.
Hope this helps.

Unable to run Crystal Report due to error code called "database code:102

I have created a View on the SQL server and Now I am trying to run crystal report using that view. However, I get Database Vendor Code error message 102. Need your help, How can I ran a report using SQL veiws in Crystal?
thanks!
Mansoor

Hi,
The report is getting an error code 102 from the database driver.Try with searching the RDBMs type for error code 102, to narrow down the issue.
If data from database is failed to retrieve then,there are several causes of this error like disconnected tables, tables that are not connected properly.
Run your query in SQLcon32 and check that getting accurate output or not.
Regards,
Shweta

Unable to Save a Service Order (Account Assignment Error)

Hi,
When i Save my service order, it gets saved but says Account could not be determined in the ECC System.
What could be missing ?
Seems like something is not configured properly in the ECC System (back-end).
I have pasted the error text for reference.
Thanks,
Prish
An error occurred in system AS1CLNT100 during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
Orgfinder: No value found for Organizational Unit BILL_ORG (Notification E CRM_OFI 002)

Hi Prish,
Please check the below link.
[Service order - Error during account assignment - Avoid the transfer to ERP;
Hope this helps you.
Regards,
Lakshmi.Y

Unable to create a production order due to error: "CX_SLD_API_EXCEPTION"

Hello,
I am a student and fairly new to SAP.
I could convert planned order to Production order (Using transaction MD04).
While trying to release the order, and saving the change, I am getting a runtime error.
Surprisingly, same exercise was performed with no errors by previous batch.
The details of the error are as follows:
What happened?
The exception 'CX_SLD_API_EXCEPTION' was raised, but it was not caught anywhere
along the call hierarchy.
Kindly help me to solve this problem.
Thank you.

Dear,
Get Help of your ABAPer to analyse it. Also will suggest you to refer SAP note.
Note 832674 - Short dump due to uncaught exception
Note 1287982 - SMSY: Terminatn UNCAUGHT_EXCEPTION for data transf from SLD
Regards
Abhijit Gautam

Unable to install Photoshop Elements 12 due to error with shared technologies. I have tried all troubleshooting steps and am no where. Install logs do not have anything that stands out. Any ideas?

I have tried all troubleshooting steps and am not getting anywhere. Any Ideas?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Discoverer Report unable to Save As

Hi,
I am unable to save a Discoverer Report using Discoverer Viewer ?
Its giving the following error message.
Please help.
"The application encountered an invalid state.
OracleBI Discoverer Viewer was unable to find the necessary data for displaying
the results of this event. Please correct any errors and try again.
Error Encountered"
Regards
Ram

Hi Ram
Most likely you are on either a non-upgraded or old cumulative patch version of Discoverer. This issue happens a lot on the out-of-the-box Discoverer - 10.1.2.48.18 but goes away when you upgrade to 10.1.2.2. You should also patch up to the most recent cumulative patch, which as of today is CP8.
Please see this posting on my blog for more about patch and release numbers: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html
Best wishes
Michael

Adobe Customization Wizard: Unable to save

I have an existing .mst file for Adobe reader 11.0.03 and added it to a deployment for 11.0.04. When I try to save I get the following error: Unable to save document, MSI database Commit failed, Error Code = 1627.
Any advice is much appreciated.
Extra information: Added the customization wizard to Windows XP, Windows 7 and Server 2012 / no solution

Post your complete cmd lines.
Run verbose and look at the log.
1627 is an MSI error that should provide clues.
Ben

UNABLE TO SAVE PORTAL REPORTS OUTPUT TO DISK WHEN USING INTERNET EXPLORER

Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
Tim

Tim,
Are you trying to save the HTML output ? You might encounter probs. with that, but that is more due to IE security
settings than the Portal.
You might want to check your IE security settings.
Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
Tim

Unable to save webi report in excel format

Hi All,
I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
Can someone please advise me on this??
Please hel as it is very urgent.

Hi All,
Trying to replicate WEBI Excel Download issue.
Operating system : Windows 7
Internet Explorer : IE8 Version 8.0.7600.16385CO.
Jre Version : 1.6_ greater than 1.8 version.
If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results.

Unable to save a report that includes a datasource of "Microsoft SQL azure" type

I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to "save as" WAD report due to error Namespace '/BIC/' must be set to changeable (transaction SE06)

Similar Messages

Maybe you are looking for