Unable to view FF reports in the front-end of FF 5.2 tool

After installing the FF tool on Netweaver, I am unable to see the reports from the back-end (R/3) system. The R/3 system has the FF 5.2 RTA installed and a user Id defined to connect to front-end of FF 5.2.
I configured the FF 5.2 connector, but still am unable to view reports from the front-end.
any suggestions would be helpful.
Thanks,
Kapil

I was able to resolve the issue by maintaining the gateway in the SAP adapter and running the transaction /VIRSA/ZRTCNFG on the abap side
thanks for the suggestions
Kapil

Similar Messages

  • Unable to view BIPub report in the Dashboard by Non Administrator users

    Hi All,
    I have created a BI Publisher report and added the same to the Dashboard, I can view it as the Administrator user but unable to view it as any other Users.
    I updated the privileges in the BI Presentation services and gave permission to Everyone for BI Publisher:
    Oracle BI Publisher Enterprise
    Add BI Publisher Reports to Dashboard - Everyone
    View BI Publisher Reports - Everyone
    Schedule BI Publisher Reports - Everyone
    Send BI Publisher Reports - Everyone
    Build BI Publisher Reports - Everyone
    Analyze BI Publisher Reports - Everyone
    but users still get the below error:
    The error message is :
    "Unauthorized Access: Please contact Administrator"
    Any help is greatly appreciated.
    Regards

    Hi Saichand,
    Thanks for the reply, I did add and it worked successfully; but the issue now is that I had assigned the XMLP_ADMIN, XMLP_DEVELOPER roles to this user and he now has XMLP Administration rights. Which is not very good.
    Is there any workaround to restrict XMLP Administration to this user and allow him just to view the BI Pub Report?
    Your comments are greatly appreciated.
    Best Regards
    B

  • Urgent!!Error in the front end when trying to view a report

    Hi All,
    I am getting this error when I am trying to view a report in the front-end.
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
    Please let me know if you have any ideas.
    Thanks.
    Vinay Sai Konduru

    Have a look at your login crenditals in the Connection Pool.
    Regards
    John
    http://obiee101.blogspot.com/

  • How can we run reports from the front enf of iProcurement...

    Hi Guys,
    I need to create a link to run reports from the front end in iProcurement webpage instead of using apps SRS to run the report...
    help needed...
    thanks
    aman

    Hi Tapashray,
    That was a great help. Thank you so much. A few more clarifications needed sir..
    I refered to a previous link and came to know about a prcedure he followed for a report. So is it the same way that is to be done... I pasted a descr what he said in the thread. In ur solution, you said, have a link bean. what do u mean by that. After i go thru all the steps what this guy told.
    It would be of gr8 help if you kindly look in to this for one more minute sir..
    thanks
    Creating a new report in 11.5.9
    Re: Creating a new report in 11.5.9
    Posted: Mar 11, 2005 7:12 PM in response to: dhergert Reply
    Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
    1-Write JSP (should be written just how Oracle writes theirs)
    2-Creat function for the new JSP page as System Administrator responsibility
    3-Use Sys Admin to add the function to a menu somewhere
    4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
    5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
    6-Drill down into that regions attributes
    7-Add a your newly created attribute to this region

  • SPM Reporting - Log reports display on front end

    Hi,
    We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
    We have done config in dev and have the following jobs running in the background every 1 hour:
    1. /VIRSA/ZVFATBAK
    2. /VIRSA/ZVFAT_LOG_REPORT
    3. /VIRSA/ZVFAT_V01
    4. /VIRSA/ZVFAT_V03
    The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
    We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
    Any suggestions how to get the reporting to display on the front-end?
    Kind Regards, Melvin

    Santosh,
    You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
    Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
    Simon

  • Visual Studio 2010 Upgrade - Unable to view some reports

    I converted an application that had been developed in VS2005 so that it would run in VS2010.  The application contains several Crystal Reports.  Now when I debug the application I can only view some of the reports.  With the others I get an exception with the message "Unable to find the report in the manifest resources.  Please build the project and try again." 
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource.  I have tried removing a report from the project and then adding it back, but that made no difference.  A new report displayed fine. 
    Does anyone have any ideas about what could cause some of the reports to throw this exception?

    OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
    And here is what I posted to start the thread that I am replying to:
    I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
    The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
    Does anyone have any ideas about what could cause some of the reports to throw this exception?
    As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging.  I have also tried deleting a report and adding it back in but it made no difference.
    Is this enough information?

  • Unable to view custom report generated in Manage Content and Structure !!!

    Hello,
    I am farm administrator and I have created report to view all checked out documents for site collection.
    as below:
    Title : All Checked Out Documents
    Query : <Where><Geq><FieldRef Name="CheckoutUser" LookupId="TRUE"/><Value Type="int">0</Value></Geq></Where>
    Issue:
    When I see the report , I am able to see all checked out documents.However site admin and owner is unable to view this report.
    They are getting following message:
    There are no items to show in this view.
    Would you please let me know what can be the root cause and how can I resolve it ?
    Thanks and Regards,
    Dipti Chhatrapati

    Dipti,
    This is by design and Unfortunately, no one else can see the documents because they have never been checked in. Even the site owner
    can't see the documents.  However Site collection admin can see everything.
    Fortunately, there is an easy way to handle this situation. The site owner can go to the Document Library Settingspage and click on the link to Manage
    checked out files.
    From here, he can select the documents and click the Take Ownership of Selection link.
    Few links: CHECKING OUT DOCUMENTS =
    NO ONE ELSE CAN SEE THEM!
    Hope it will help :)
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Crystal Report not running from Addon in the Front End.

    Dear All ,
    There is a Crystal report , .rpt File inbuilt in the Add-on .
    This report runs well from the Source Code .
    But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
    Suggest what to do ?
    Thanks
    Ashish

    Dear Rahul ,
    In my system , there is a Addon , which has some crystal Report file inbuilt .
    Which run on the Button Click event in the Form at the Front End (SAP GUI).
    When we debug the Source Code and pass the event . . Report Open with no hurdle.
    But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
    Thanks
    Ashish

  • Unable to view Time-Statement  for the Chosen period in Portal

    Hi ,
    I am unable to get the timestatement for the Chosen period in Portal
    What are the configurations that are to be made for the Timestatements to get dispalyed at the Portal end .
    At r/3 end , we have a timestatement data  for an employee and moved that to a Cluster B1. so how does it reflect in the portal.
    What am i missing to get that Timestatement to get displayed on Portal
    Regards,
    Vijay

    Hi there,
    As of what I see it is an MSS scenario.In this you used a business package, iviews. There should be a webdynpro application or BSP application running at the front end to get this out.
    Now, as you mentioned at the R/3 end you have a time statement. So if your web  application is programmed properly, it will fetch the req. time data from backend. What you need to see is that the web application is bug free.
    You need to do some debugging there, if the right data is fetched.
    but before all this, you need to check if your portal worksets in the business package are set up properly, along with the iviews, pages.
    Regards,
    Bharat
    Message was edited by:
            Bharat

  • I am unable to view imported certificates in the certificate manager in Firefox.

    ''dupe of https://support.mozilla.org/en-US/questions/909905''
    I am unable to view imported certificates in the certificate manager in Firefox.

    Many thanks SafeBrowser; I think the Yahoo and Babylon extensions were the problem. Didn't want them anyway!

  • What are the front end tools & components needed to use Visual composer.

    Hi all,
    please help for the following queries.
    1.What are the front end tools & components needed to use Visual composer.
    2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
    3. How to create Webreports & Dash Boards in Visual composer.
    It's Urgent waiting for responses.
    Thanks & Regards,
    Basava Raju

    Hi James,
       For  Visual Composer no need any Front end tools.. you need  portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
       all the reports.. that web based reports  or dash boards we can view through Browser only..
    for creating reports in visal composer.. just go thru this links..
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
    for How to Guides - Visual Composer.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
    /people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
    /people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
    regards
    @jay

  • Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

    Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

    This forum thread appears to point towards the problem.
    Re: Unable to Switch Audio Sync Settings

  • Can we hide the tables and columns from subject areas in the front end

    Hi,
    Is there any way to hide the tables and columns from the subject area in front end.I need to create a report with some tables which the user does not want to see.So after creating the reprot can I hide those tables and columns in the front end

    Hi,
    Your question is not that clear to me...do you want to hide the entire table/column that dont want to show up in the front end then you could do in Presneation Layer in the RPD by going Permissions in the property of that object.
    But if you want to hide the column in the report that can be visible in the subject Area: go to column properties -> Column fomat...thereis Hide option.
    Can you please elaborate your question...what exactly you are looking for...
    --SK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Hiding columns in the front end i.e. Oracle Answers

    Hello,
    I wonder if it is possible to hide the non-essential reporting colums such as ID from Answers so the front-end users only see the column that should
    be exposed for reporting.
    Thanks,

    You should be ok as long as the joins and relationships are properly setup in the Business Layer.
    It's also possible to 'secure/hide' specific columns within a Presentation Column in the repository by setting permissions to specific repository groups. This way some Answers users could see the columns while others would not.
    JES

  • If the front end on my 6111 was 'knocked-out'..

    if the front end on my 6111 was 'knocked-out'... would the MAX device test report an error

    If you are talking about, right clicking on the input channel and bringing up "test panel" it would show an error only if the "Knock-out" caused the input values to be out of range. Other wise you would would see some wrong value displayed.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for