Unity Connection 9.1 - Call back feature

Hello,
Is there a feature that would allow a user to callback the caller from the voice message itself.
For example Calling number 123-123-1234 calls extension 2000 and leaves a voice message. When user with ext 2000 listens to the message from 123-123-1234, can they press a button that would automatically call 123-123-1234.
If anyone can point me to some documentation that would allow this, that would be great ! !
Thanks,
AK

Duplicate
https://supportforums.cisco.com/discussion/12264381/unity-connection-91-call-back-feature

Similar Messages

Unity Connection 8.6 call transfer to non-unity extension

I have converted from Unity to Unity Connection and am looking for a solution for transferring an incoming call to a non-unity user extension.
Here is the scenario: An PSTN caller calls in and is directed to a Unity Connection Call Handler or a Subscriber greeting. In the greeting they are advised that if they know the extension they want to call, they can dial it at any time. Here is the rub, if they dial an extension for a user listed in Unity Connection, the call gets transferred to the extension. However, if the extension dialed is to an extension that is not a Unity Connection User, the attendant comes back and say the extension is not understood.
In Unity before conversion, I would make an internet user that did not have a mailbox but was listed with an extension. However, with Unity Connection, I am using LDAP integration with Microsoft AD and I don't see a method of doing the same thing.
Is anyone else doing something like this or know of a method to do it?
Thanks in advance.
Gene Keel

In the greeting check this box:
Allow Transfers to Numbers Not Associated with Users or Call Handlers
also make sure the number entered by the call is allowed in Default System Transfer restriction table.

Unity connection stop take call every 25 minutes

Hi,
first sorry for my english.
last week i had cucm version 6.1.5 on mcs 7845 h1 and unity connection on mcs 7845 h2. all work fine.
last weekend i upgrade my cucm to version 8.5.1 and i backup the publisher to restore on UCS R210-2121605 (on virtual machine).
i keep the unity connection server on the MCS server.
yesterday on load (many call in same time) the system coming very slow to answer every 20-25 minutes for 5 minutes and unity come back correctly after 5 minutes.
last night i changed server. i toke backup of my mcs to restore on new install of UCS (new installation of unity connection).
during the night all my setup (cucm and unity) work fine.
this morning i have the same trouble. each 20-25 minutes i can't reach voicemail pilot.
I don't have any rtmt error, the cpu and memory of unity and cucm are normal (around 10%).
Alex

this is the solutoin
my unity was registred on call manager publisher on IP 10.64.1.10/255.255.255.0 gw 10.64.1.1 and my subscriber 10.64.1.140/255.255.255.0 gw 10.64.1.129.
my unity connection have ip adress: 10.64.1.170/255.255.255.0 gw 10.64.1.129.
i have i trunck between the 2 switchs with 3 vlan inside. the call managers and unity are in the same vlan but my cucm publisher are in a different building.
i don't know why, but i registred unity connection on subscriber and it's stop freeze each 20 minutes.
the theory said my cucm cluster and my uinty are in the same network (it's work fine before my upgrade) suppose to work and the same network and for communicate outside this network each server toke how gateway. but not each 20 minutes
Alex

Unity Connection 8.x Call Admission Control

Hi,
I am trying to find out if there is a separate CAC mechanism for Cisco Unity Connection. Or does it depend on Call Manager Locations for CAC?
Thanks
James

CAC has to be configured either on CUCM and/or on GKs, CUC has nothing to do with it.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Cisco Unity Connection 9.1 Call handling

Dears,
I want to configure the call handling means if some body calls on board line 24500000 the corporate opening greeting should be played and then press 1 for sales, press 2 for technical,press 3 for presales, these all audio (corporate greeting, press 1 for sales ,press2 for technical etc....) can be done by a text to speech in unity connection or i have to enroll a audio recording company.
Also please route me to good doc how to configure call handling.
Thanks

Hi Clark,
Just to add a note to the good tips from Chris (+5!)
I would go through the training tips for this great tool designed to build Call Handlers. It's called AudioText Manager;
http://www.ciscounitytools.com/Applications/CxN/ATM/ATM.html
Then you can use the Greetings Administrator Conversation to do all your recordings
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag150.html#wp1049924
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

Setting up Unity Connection to email/call cell for new vmail msg

Hello,
I have been trying to setup Unity connection so that it will send an email to Exchange or a message toa cellphone alerting a user that they have a new vmail. I went in under my user account to test (under Edit\Notifcation Devices) and added my email address and my cell but I never get an alert.Where am I going wrong? Any help is appreciated.
We are using Unity Connection 1.2(1).
John

John,
In the Notify Me Of Voice Messages list, make sure that you have chosen Every Voice Message.
Brandon

Unity Connection 8.5 mailbox quotas

I configured mailbox quotas for user mailbox
Send/receive quota is 3 Mgb
Send Quota is 2 Mgb
Warning Quota is 1 Mgb
User mailbox is already 3.5 Mgb
HOwever, when i call this user from internal or external number - i still can leave a mesage for this user ( i expected system DOES NOT ALLOW to leave any new mesage for this user because his voicemail box is already exceeds Send/receive quota which is 3 Mgb )
Checkbox for option "Full Mailbox Check for Outside Caller Messages"is already checked in
What is wrong in this config ?

Here is how send/receive quotas impact things:
Quota Handling for Outside Caller Messages
By default, if an outside caller attempts to send a message to a user whose send/receive quota has been exceeded, Cisco Unity Connection allows the caller to record a message for the recipient. This can be changed by checking the Full Mailbox Check for Outside Caller Messages check box on the System Settings > Advanced > Conversation page.
If the recipient mailbox has not yet exceeded the send/receive quota at the time an outside caller records a message, but the quota is exceeded in the act of delivering the message, Connection delivers the message regardless of the quota or the setting of the Full Mailbox Check for Outside Caller Messages check box.
Quota Handling for User-to-User Messages
If a user whose voice mailbox has exceeded the send quota signs in to Connection and attempts to send a message to another user, Connection indicates that the send quota has been exceeded, and does not allow the sender to record the message. If the user calls another user and is forwarded to a voice mailbox, the user is able to leave a message, but the message is sent as an outside caller message.
If a user attempts to send a message to another user whose mailbox has exceeded the send/receive quota, or if the quota is exceeded in the act of delivering the message, Connection sends a nondelivery receipt to the message sender.
Connection delivers read receipts and nondelivery receipts to users regardless of whether their quotas have been exceeded.
HTH,
Chris

CVP - Courtesy Call Back

Hi ,
We are testing with CVP Courtesy Call back feature. We didn't get Call back request from the CVP .
Call in the queue for longtime .
My doubt is here call in the queue exceed the EWT or call back is not intiated by the CVP.
Plesae find the below calculation to get the EWT in the script.
ValidValue(((SkillGroup.SKG_Sales.RouterCallsQNow+1)*(ValidValue(SkillGroup.SKG_Sales.AvgHandledCallsTimeTo5,20))/max(SkillGroup.SKG_Sales.Ready,(SkillGroup.SKG_Sales.TalkingIn+SkillGroup.SKG_Sales.TalkingOut+SkillGroup.SKG_Sales.TalkingOther))),100) .
I have tried with the default calculation in the sample script also but nogo.
Please suggest how to proceed further & troublshoot on this.
Thanks in Advance

the problem has been resolved.
In fact, the problem is due to the discordance between CVP Reporting server version and the CVP Call Server.
the patch “CVP8.5(1) ES18” was installed only on the CVP server Reporting (for resolving another problem) what caused this version mismatch and impacting Courtesy Callback feature.
By uninstalling the patch, the problem was solved.

UCCX v9 Call back script

Hi everyone,
I have built some scripts on earlier versions that work ok. The first script I am building on v9 has a callback feature on it. I have started with the script_repository_701 files as a basis and the 'normal' call flow works fine. I have implemented the call back feature, the script captures the callers details and then hangs up, makes an outbound call and then gets stuck with the following loop as documented on the attached word doc. i have searched for a solution online but haven't found any pointers. I have attached the scripts for your review too.
Thanks in advance

Hey Brian,
I have a working script
call back is configured on the menu option 1 only for testing.
once selected it prompts for a contact number and then a short message from the caller, once confirmed it hangs up. the script holds the callers place in the queue and waits for an agent to respond by making an outbound call to the CBAgentLoop script.
Once an agent responds they get a prompt to press any key listen to the message, and then a menu to repeat the message, hear the number read out, or dial the stored number with some conditions applied.
If the caller is busy or the number is incorrect the script will read out an error message, the attempted dialled number and loop back to the agent menu.
This seems to work ok for me but I would appreciate any feedback, tips or questions you may have.

Unity Connection 8.5 - No Diversion Header information in transfered call

We are having call failures when calls are transfered to our SIP provider from Unity Connection (AutoAttendent). We have tracked this down to Unity is sending a Refer that does not have any information regarding the number the call was transfered from. Subsequently Callmanager does not create a diversion header in the invite to the SIP provider.
The SIP provider require either a authorized number in the from header or a the same in the diversion header.
We have the rediversion headers enabled on the callmanager side of the trunk.
Does anyone have end to end SIP configuration with UCM 8.5 and Unity Connection 8.5 and can complete transfers back to the provider?
mike

I don't see any problem, just don't check the option to ignore additional input when configuring caller input on digit 1
By default CUC will give you 1500 ms to dial for any other digits before trying to route the call with whatever you dialed.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unity Connection transferring calls to CUCM

I have posted here before, continuing my learning in my lab.
CUCM 9 and CUC 9. 4 IP Phones registered and all have mailboxes. I have a System Call Handler configured to answer calls coming from a CTI Route Point.
I have been playing with a scenario trying to learn all the capabilities of the various call handlers.
Im currently trying to allow the caller to transfer to a phone number that is registered in CUCM - but does NOT have a mailbox.
My CUC Configuration
     Call Handler Basics
          Callers Hear -> My Personal Recording
          During Greeting -> Allow Transfers to Numbers Not Associate with Users or Call Handlers
          After Greeting -> Conversation -> Caller System Transfer
     System Settings -> Restriction Tables
          Default Transfer
               I added a new entry and specifically entered the DN that I was trying to transfer to (123)
               I unchecked the "blocked" for all entries
     Call Management -> Call Routing -> Forwarded Routing Rules
               Attempt Forward Routing Rule -> Send Call to -> Conversation -> Attempt Forward
From an IP Phone, I dial the CTI RP and get forwarded to the main / opening call handler. I traverse a couple of menu tree levels to get to my call handler where I am attempting to transfer back to CUCM. I hear my recorded personal greeting instructing me to enter my number. Whether I wait for the recording to end or whether I enter the digits during the greeting, the results are the same. The result is that nothing happens. No recorded message telling me that I cant be transferred to that number - nothing at all. The call just terminates.
I started up Connection Remote Port Status monitor and I can watch the sequence of the call. When I enter the digits of the target phone (123), I see in the Remote Port Status Monitor that it sees and receives the DTMF digits, but then nothing happens.
I next tested by adding a test user in CUC with the same DN of 123. As soon as I did that, I repeated the attempted call and when I dialed "123", I get the recorded message "Wait while I transfer that call" and then the call completes successfully.
This is my home lab so I can make any changes that you suggest with no user implications.
Jeff

Hi Jeff,
That is weird! It is still shown in this 9.x doc
Overview of Default Restriction Tables in Cisco Unity
Connection 9.x
Default Fax
Restricts numbers for fax delivery.
Default Outdial
Restricts numbers for message notifications
Default System Transfer
Restricts numbers that can be used for
Caller system transfers, which allow
unidentified callers to transfer to a
number that they specify. For example,
callers may want to dial a lobby or conference room phone that is not
associated with a Connection user. By default, the table does not allow
Connection to dial any numbers.
Default Transfer
Restricts numbers for call transfers.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/administration/guide/9xcucsagx/9xcucsag110.pdf
Cheers!
Rob
"May your heart always be joyful
And may your song always be sung
May you stay forever young "
- Dylan

Can i have IVR feature with ccm 6.0.1 integrated with cisco unity connection 2.0.1

Hi
can i have IVR feature with ccm 6.0.1 integrated with cisco unity connection 2.0.1.
And tell me a solution how can i go for IVR with this design.
Thanks.
veera.

Yes, you can have a basic IVR with CUC, no one can tell you how to design your CUC, that's up to you and your requirements.
All you need are call handlers, caller input and greetings.
If you need someone to do all this for you, engage with a local Cisco partner.

How to configure Cisco Unity connection 8.x to play an after hours call handler

Hi,
I have CUCM 8.6 and CUX 8.6, we have successfully configured Call Handlers to play greetings. But the problem is greeting is played complete day and all the day in a week. We want to customize this call handler so that it plays only during the business hours and also during the weekdays.
I have a recorded after hours and holiday greetings recorded but unable to find the way to configure it for Holiday greetins. Please help with the configuration part.
Regards
MAC

Hi MAC,
What you need to do is configure a schedule for the call handler. On Unity Connection, you can browse to System Settings > Schedules (and Holiday Schedules). In here, you create your schedules to say which times of the day you are open. You then go back to your call handler and apply these schedules that you've created.
Now when a call comes into the call handler, it will check the time against its schedule and play the appropriate greeting.

Call forward to unity connection call handler

have the following setup:
cucm 8.6
cuc 8.6
a cti route point (DN 1000 )with forward all to unity connection call handler.
phone users who choose to have some quiet time can forward all their calls to the cti rp.
1. i need to allow only specfic DNs the ability to forward to the cti rp.
2. at times that the allowed DNs didnt choose to forward to cti rp then normal behaviour should occur - busy or unanswerd calls should go to DNs personal voice mail.
thanks

You can assign a specific partition to cti-rp and assign it to a CSS and this CSS should be assigned to those users (at call forward settings in line) only to whom you are trying to give this facility and for other users you can
or you can create a TP for it with specific partition and set the called number as per voice mail.
Suresh

Unity Connection - Certificate from cucm no more trusted for encrypted calls after upgrade to 10.5(1)

Hello Support Community,
i have a strange problem:
after upgrading my cucm and unity connection from 9.1 to 10.5(1) enctrypted calls are no more working.
situation 1: CUCM is down, Subscriber is up: Encrypted call to Unity Connection work correctly
situation 2: CUCM is up: Encrypted Calls to Unity Connection not working.
i get the following Info in the log for the Connection Conversion Manager:
19:35:21.053 |15865,,,MiuGeneral,25,Invalid Certificate: Received Certificate -----BEGIN CERTIFICATE-----
MIID8zCCAtugAwIBAgIQc/fBdUz1Zdh4CXhcPqGVuDANBgkqhkiG9w0BAQsFADBw
MQswCQYDVQQGEwJERTELMAkGA1UEChMCSVQxGzAZBgNVBAsTEkhlbGxnYXRlIFRl
XD0oD9d5MQ==
-----END CERTIFICATE-----
doesn't match with stored Certificate: -----BEGIN CERTIFICATE-----
MIIC2DCCAkGgAwIBAgIIJWCm4bSdt+kwDQYJKoZIhvcNAQEFBQAw
-----END CERTIFICATE-----
so where does Unity Connection cache this certificate and how can i delete/replace it?
the cert shown in the logs is the one from cucm: ("CallManager"), i recreated it through cucm os administration, now i see the same error message on unity connection for the new recreated certificate.

Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
Message was edited by: graphico
Message was edited by: graphico

Unity Connection 9.1 - Call back feature

Similar Messages

Maybe you are looking for