Unused BOM components not getting filtered

I have written a Query for BOM, which is having ECM active. Earlier there were 14 components.
3 components have been removed. But If I execute my Query--it is getting all the 14 components
instead of 11.
In CS03--If I execute,
with both Valid from and Valid to date as today--Defaulted--Then 11 components are displayed.-OK
If I keep Valid from Only--Then 11 are displayed.--Ok
If I remove both Valid from and Valid to date--Then 14 are displayed.-Ok
If I keep valid to date --Then it is displaying all the 14 components.
That means Valid from is acting a s filter.
If I use the same Valid from--(Tried all the Valid From fields in STPO) in my Query--It is not taking.
The strange thing this, If we give that Particular date (On which the component is changed)--Then it is
taking and showing the output in the query.
The thing I need here is --The same functionality (Filtering criteria) has to be put into my Query.
P.S: Even Standard reports like CS11/CS12/CS13 are not filtering, in the way--CS02/CS03 are doing.
Any suggestions would be highly appreciable. Thanks in advance.
Wherever we see in the standard reports--The Valid to is coming from structures.

Hello,
You can try with CS11/CS12 where select Change No. and valid from date.
If you change a Material BOM with a change number then a new entry is created in the database (tables STPO, STAS).
Best Regards,
R.Brahmankar

Similar Messages

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Report is not getting filtered

i created a date between prompt , and filters and selected as filter is prompted but while i selecting the date range in dashboard its report is not geting filtered.

Hi Saket,
check whether the particular column is prompted in the report....
Refer : http://obieeone.com/2010/03/04/lessons-in-filters-and-the-is-prompted-operator/
Thanks
Aravind

BOM components are not matching in BOM and STPO table

Dear Guru's
When I check the BOM compoenents and the STPO table it is not matching.
For an example, If Material X has 10 components avialable in BOM (CS03), and when I go to STPO table with the BOM number it has about 15 centries in it.
We have Engineering Change Management Activated, So I have removed any duplicate items but still BOM no of BOM components and the no of components in STPO table is not matching.
Please be knind enough to let me know if there is any specific reason for this or any other place I can get the exact BOM components in a SAP table.
Thanks & Best Regards
Rupesh

Since you're working with ECM, STPO table keeps log of all entries made, even if those components are no longer active.
If you want to know which lines are relevant & which are not, you will have to look at tables STAS & STPO together, only then will you be able to know which lines in STPO are active, only these you would see in CS03 as you notice now.
Hope it clarifies, else revert.

Bom item data - Document assignment not getting saved in table STPO

Dear All,
              As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
               Waiting for solutions
Thanks & Regards
Dhananjay Kulkarni

Please understand my customers requirement,
                           Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
          In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify the individual drawing with part name.
          One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
          One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
         Is anything missing from Document management system?
Please think and reply friends it's Urgent.
Thanks & Warm Regards
Dhananjay Kulkarni

Storage location not getting copied in process order for components

Dear PP Gurus,
While making a production /process order the storage location of component materials is not getting copied from material master into the process order, it is showing any default storage location.
What couls be the reason for it..
For all components it is defaulting the same storage location.
Please throw some light on the issue what could be the reasoon for it..

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

Filters not getting passed in MDX query while using SAP BW with OBIEE

Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
Rocky

Hello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Batches not getting for order components at time of order creation

Hi Folks,
My requirement is that when I create a production order and save automatic batch determination should take place for all components. For this I have done all the settings for eg
1) Assigment of batch search proceduree to order type
2) Define batch search strategy,procedure , condition , access sequence
3) Create batch strategy record for order type/ plant/component by COB1
4) Create sort rule and assign to batch strategy record
5) Batch classification is there and value of the sort chracteristic is populated in all batches
6) There is enough available stock in the batch at that storage location
But batch field is not getting populated .. Even if I press the batch determintion button manually
on the component overview screen batch selection screen is appearing but no batches are getting determined for selection .I have checked the selection criteria and it is correct and I was expecting batch 'ZSWETA' to b determined as it is satisfying the selection criteria. I am really wondering why this is happening as I have done all the required config settings but batch determination is not happening..
Can you please help me out of this...
Regards
Suchandra

Hi,
kindly check the following things-:
Material master -: Purchasing View tick in check box of Batch Management
MRP 2 -:Batch Entry(Select 3-Auto Batch entry on Release)
Work Scheduling -: Batch Entry & Batch Management.
hope it will help you to get the auto Batch Number.
Regards,
Mukesh

Components are not getting consumed at the time of GRN for Subcontracting P

Dear All,
I hav created a Subcontracting PO and transfered the componenets
At the time of GRN for Finished Product, consumption of componets are not happening and GRN is getting posted
Please help me

Hello,
Have you created the subcontracting Purchase order or not? check , Item category "L" was available in Purchase order not?
I mean you are not getting the 543 movement type in MIGO transaction.
Follow below steps for subcontracting
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Please check these steps are their in your PO or not?
Regards
Mahesh Naik.

Not getting swing components when the applet reloads

I am facing one problem that is related to reloading of swing components. I Have a JPanel inside JApplet which contains some swing components and a button to launch the same JPanel again in the JApplet. When I click on the button the JPanel should get added in the JApplet once again below the upper JPanel. But new JPanel is not getting displayed although the reference of the new JPanel is created.

My guess is that you haven't added your swing components to the right place. Are you adding them to the contentpane?

BOM main item not getting copied in delivery

Hi SAP experts
The problem iam facing is the main item in sales order is not getting copied in delivery and subsequently not able to generate the billing document as the subitems are not relevant for billing. I got a solution saying that the problem is with the delivery group in the item category.
But for the same item i tried to create order for a different order type and it seems to be working fine. Its happening for a particular order type only.
I checked in the copy control settings and settings seems to be fine.
Can somebody help me on this issue.

Hi,
In VTLA, check copying requirements.
Regards
SD

Stock not getting updated after confirmation of order

dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

Hi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR" enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna

VC - Report for charateristics with their corresponding BOM components?

In our company, we define our finished products as configuration material.That means we have
used the variant configuration(VC) in SAP.
We have created super BOM for our finished products. And when our sellers create sales order
in SAP ,they will choose the configuration,and after they choose that,the BOM for production
will be formed.
For example,just like computer as finished products ,customer may choose different
configurations. For example ,hard disk ,customer may choose 120G or 200G.
In SAP ,to realise that ,we will create one charateristic as HARD DISK, and it has two
characteristic values:120G and 200G.
And in our super BOM for computer ,we will write object dependency(OD) for two components:
one is 120G hard disk material,we may write :TZ_HARD_DISK = '120G' ; the other is 200G hard disk material ,we may write: TZ_HARD_DISK = '200G". That means when customer create a order and choose 120G hard disk ,the 120G hard disk material will be a component in the BOM,and the 200G hard disk wiil not be a component in the BOM.
My question is that there is correspondence relationship between charateristic and BOM component(object dependency as link), can we get a report or a list to show all the charateristic with their corresponding BOM components?
By use CT11(find characteristics in object dependency) and CU04 (find object dependency with BOM component),we could find BOM component once a time.
So there is a report to show all the charateristic with their corresponding BOM components?
By ABAP development? Or there is standard report? Or ther is third party tools?
Thanks for any reply!

Are there any other experts who are reach in the Variant Configuration of SAP know?
If there is a report to show all the charateristic of Variant Configuration with their corresponding BOM components?
We are looking for the standard report.
By use CT11(find characteristics in object dependency) and CU04 (find object dependency with BOM component),we could find BOM component once a time.
Are there another TCODE or programme like CT11 but can find many characteristics in object dependency) once a time?By now ,use CT11, we only can find one characteristics in object dependency once a time?
Only by ABAP development? Or there is standard report? Or ther is third party tools?
Edited by: Fei Liu on Mar 17, 2009 7:19 AM

MRP RUN- KIT BOM explosion not working

We setup one layer BOM’s for our maintenance KITs as parent material and components as child material. For example KIT is TS10000-K1 and components are TS10001, TS10002 etc setup as next layer with in the BOM. Both KITS and components are defined as material types ERSA (Spare parts). These one layers BOMs are setup as production BOMs and expected to create purchase requisitions for KITS and components by exploding BOMs during MRP runs. We use purchase requisitions and convert them into POs to procure both KITS and components. We DO NOT USE Panned orders and Production orders.
The safety stocks / reorder point are considered as demand for KITS and components as we do not have any external demand for KITS and components.
MRP run is creating purchase requisitions automatically for both KITS and components as per safety stocks and reorder point defined in MRP Views of Material Master. This is working as expected.
The issue is: KIT BOM’s are not exploding to generate purchase requisitions for the dependent components of KIT BOM. Please suggest the way to resolve this issue.
Split valuation: Also we plan to use split valued KITS with both new and refurbished. So we need BOM explosion for split valued KITS
also (after the 1st issue is resolved).
I verified the following items to make sure the required configuration and data setup is defined correctly.
1) Planning file activated Plant - OMDU
2) Executed MRP run with Total Planning - MDBT and MD02 (single item, multiple levels)
3) BOM explosion for MRP activated- OS23
4) MRP type in MRP1 view- PD and VB (I tried both separately but BOM is not exploding).
5) Procurement type “F” (MRP 2 view) and lot size “EX”
6) Planning strategy in MRP 3 view (tested w/o planning strategy and with strategies 10 and 40. But BOM is not exploded)
7) BOM status and usage (status is active and usage is for production-CS02 and OS20)
8) BOM Validity date (Valid)
9) BOM structure in CS12 (BOM is exploding in CS11)
10) Availability check
11) Selection of BON ID to have BOM usage indicator assign (OS31).
12) No alternate BOMs or production versions or work scheduling view are used.
Please review the above 2 issues and suggest any workable solution. Thanks in advance!
NOTE: I extensively used MRP with multi-level BOM explosion in my earlier projects without any issue. However the above issue is a bit strange why one layer BOM is not exploded in this case.
Regards
Srini

Hi
Thanks for your response. I reviewed all SAP notes and none of them are applicable to my scenario.
1808396 - BOM changes not considered by MRP: I have not changed BOMs.
1781324 - MD11: Valid BOM alternative is not found. We do not have alternative BOMs.
1791009 - No BOM explosion after changing production version: We am not using production versions.
Our Material KITS are PM spare assemblies set up as BOMs and consists of individual spare parts as components. We are creating purchase requisitions and not planned orders. We are not using PP functionality/Production orders.
MRP is generating purchase requisitions for KITS and components as per ROP and safety stocks. In other words it is working as expected. The issue is BOMs which are parent assemblies are not exploding to the next lower level components.
Please note that I am not getting any error messages when MRP is executed.
Regards
Srini.

Unused BOM components not getting filtered

Similar Messages

Maybe you are looking for