Unzip help
I need to unzip some files on my new mac book with Lion. What should I download to do this? Thanks
Need to unpack .zip file?
Well, you can unless you’re in hurry, as this window goes for 3 minutes. And helpdesk.zip is 453 bytes file.
Similar Messages
-
The programmer I'm working with to publish my
RoboHelp 7 application help wants an output which will work with
AppleHelp. I have given him WebHelp and HTML (.chm) output files,
but he wants "unzipped files without Javascript" instead. He
doesn't want to use help in a browser. Does anyone know if there is
an output from RoboHelp which will work? Many thanks for any help
or explanation you can offer, I don't know enough about programming
to understand this. - Confused in CaliforniaI don't think I have seen AppleHelp mentioned on these forums
before.
Any unzipped help output from a HAT such as RH is going to
need a browser. You can avoid javascript using the Pure HTML option
but that does not avoid the browser requirement. HTML outputs
created in Dreamweaver would require a browser.
A quick google on AppleHelp suggests you need a different
authoring tool.
Maybe discuss this with your developer and get some more
information that may help someone here give some advice? -
WebLogic 6.0 Compaq Tru64 Installation
Hi all,I would like to ask a simple question about installing weblogic on Compaq tru64. I have installed WL 6.0 on Sun Solaris before. As it was explained in documentation to install WL yo need to write "sh filename.bin" on Solaris. But, on compaq it is a little bit different and i couldn't find any documentation how i can install a .zip file for compaq. This zip file is similar to a .bin file for solaris. I tried "sh filename.zip" on Compaq but it didn't work.Briefly, how can i install WL 6.0 on Comapq tru64. Any help will be accepted.Thanks in advanceAydin Tekin
Hej
The installation procedure for tru64 is a bit different than the other
UNIX-variants and is undocumented.
First you have to download and install a JDK 1.3 from
http://www.compaq.com/java/download/index.html
Check your java version with:
java -version
You can then install the WLS 6.0 by invoking:
GUI wizard: java -classpath weblogic600_tru64.zip install
Command line wizard: java -classpath weblogic600_tru64.zip install -i
console
Kim Bucio
Post Danmark
"Adrien Beau" <[email protected]> skrev i en meddelelse
news:[email protected]..
I have no experience of Tru64, but I would be very surprised
that 'sh' would accept a Zip file as an argument.
I think you need to unzip the file first, try with
unzip filename.zip
unzip -h or unzip --help might give you help
Ask a guru around you for more help about Tru64.
I hope you will find a .bin or .sh inside the Zip,
that you will be able to use with 'sh'.
Adrien Beau - Stagiaire GDET
Bureau C608 - Poste 6119 -
Help - problem unzipping files on Terminal
Hi,
I have been unzipping files (zip and rar) using Terminal for quite sometimes now. For unknown reasons, it's given me some problems unzipping today.
When I typed cd. /desktop, as I did in the past, it suddenly showed an error:
-bash: -bash:: command not found
I typed "/bin/echo $PATH", as I saw other previous posts have suggested. The result:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
I am not sure what that means, i.e. is it ok? or is it not? and how do I fix the problem if not ok?
I am completely IT illiterate, especially when it comes to any computer language. So please, a simple and straight forward answer, or preferrably a step-by-step guide, will be truly appreciated.
Many thanks for your kind assistance in advance.MrHoffman, thanks ever so much for the helpful answer.
a "cd ~/Desktop" instead of "a dot and a space" did allow me to unzip my files finally!
Just wonder, by doing what I have just done, i.e. a dot and a space and then the target directory, had I already committed the sins of damaging the "Path" (something I learned from reading other similar posts in the forum)... Basically, I just want to know if i have damaged the file contents... and if so, how bad is the damage? (so far, my Mac works fine....)
Digress, I would have loved to stay away from using Terminal as far away as I could, since I am dreading of the thought of me ended up doing something damaging to the lovely Mac. But unfortuantely, there isn't any idiot-friendly tool available for unzipping any password-protected zip files.... Would appreciate if you could offer any alternative solution to this, i.e. other than using Terminal! (NB. I have also looked into using EZ 7z and X7zX for Mac before, both of which i just gave up in the end!)
Anyhow, thanks! : ) -
Help:how to use java.util.jar to zip or unzip a binary file.
how to use java.util.jar to zip or unzip a binary file or a file contain native code.
It may help you to know how I add JARs
1. I open my Project (myProject)
2. I Mount the JAR to the FileSystem (like mypackages.jar = which includes com.mus.de.myClass.java)
3. I Mount the File to the FileSystem (like c:\..myfiles..\myProject)
3.1 I add the File to my Project
4. I select File | New -> Classes | Main
4.1 I typed "import com.mus.de.myClass.java" to refer to this package.
4.2 I called some of the public methods
thats it
Andreas -
Having downloaded and unzipped tutorial builder, extension builder, and scrip tlistener, I cannot find an application file to load. Please Please help
Hello Jeff
I use Photoshop cc and downloaded Tutorial Builder from Adobe Labs.
Managed to unzip it ok. Now I am stuck as there are .jsx files and script files but no instructions.
Hope you can help and thank you for your interest.
Malcolm -
I regularly download zipped files from Survey Monkey. Since the latest security update, the zipped files download to my computer, but when I try and unzip them I get a message telling me the file is in use by another application. If I reboot, I can unzip the file, or if I'm in Safe Mode when I download the file it unzips fine.
I have tried three different unzip apps and all have the same trouble. Everything was working well after the September 5 update.
I'm running Windows XP with McAfee antivirus, Spybot, Ad-Aware and Malbytes Anti-malware. All are up to date.The URL below is to Adobe's Acrobat update page.
There you'll find each of the incremental updates to Acrobat 10.
They must be installed one at a time in sequence.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Now, if after attempted updates fail then you'll need to speak with your IT Department.
You need your install of Acrobat 10 updated to dot version 10.1.7.
Be well...
Message was edited by: CtDave -
Ziping and unziping files in a directory Please help
I have a program to zip files in a directory and create a .zip file.
But am not able to unzip the file back to the orginal files. This file can be unziped using any unzip tool. But i want to unzip it using java itself
thanks
the code is as follows ......
import java.util.zip.*;
import java.io.*;
public class Zipper
private String dirname;
public void compress_file(String input_dirname,String outfilename)
//getting all the file names
this.dirname=input_dirname;
File f1=new File(dirname);
String s[]=f1.list();
try
byte[] buf = new byte[4096]; //read buffer
int retval; //return value
FileOutputStream os = new FileOutputStream(outfilename);
ZipOutputStream zos = new ZipOutputStream(os);
FileInputStream is= new FileInputStream("File1");
for(int i =0;i<s.length;i++)
System.out.println(s);
is = new FileInputStream("./conf/"+s[i]);
zos.putNextEntry(new ZipEntry("./conf/"+s[i]));
do
//read file in from input stream
retval = is.read(buf, 0, 4096);
//-1 indicates end of file
if (retval != -1)
//write buffer to output stream
zos.write(buf, 0, retval);
}while (retval != -1);
//close this ZipEntry
zos.closeEntry();
//close input stream
is.close();
//close output stream
zos.close();
catch(Exception e)
System.out.println("Exception occurred: " + e);
public static void main(String[] argv)
Zipper zp= new Zipper();
zp.compress_file("./conf/","sample.zip");I'm kinda unclear about what problem you are having, but try this link
http://developer.java.sun.com/developer/technicalArticles/Programming/PerfTuning/#Compression -
NEED HELP PLEASE!!!! Not unzipping but executing .jar file on iPhone
I am in need of help, Please, there has to be someone who knows how to do this!
OK On iphone 4s, I used winzip to extract a .jar file but I am unable to open and use the actual file.
This was expensive purchase and this is a time issue.
Thank You Very Much!!!!You can't, .jar is a Java archive, iOS doesn't have a java virtual machine.
-
I cannot open a zip file on my macbook pro, it is a download from the public library(ebook) I tried to download unarchive and others like it and no dice. Please can someone help me, I need step by step instructions, still learning on my mac. Thanks so much:)
Download StuffIt Expander. It's free!
-
HT1926 My mag. sub. will not down load it showes that they are and then unzipping then stops help
Does anyone know what to do?
Make an appointment at your local Apple store and take it back. I think there's some sort of hardware issue going on and they are the only ones to handle it.
-
Unzip file using PayloadZipBean in Sender FILE adapter
I am trying to unzip a flat file in Sender FILE adapter using PayloadZipBean.
I am getting mapping error. The problem is File adapter is reading data without unzipping. I am getting weird characters/data, so mapping error.
I searched all the blogs/ forum threads and help.sap.com, everywhere the focus is on zipping, not unzipping.
the file I have is with .gz extension, but I tried with .zip extension also.
Please help in resolving this issue.
Edited by: Gopal Janagama on May 2, 2008 11:42 PMGopal,
GZIP and ZIP format are slightly different, as stated here :
"GZIP compresses only one file and does not have a header. ZIP contains header information about what files are contained in the file."
So I'm not sure the PayloadZipBean supports GZIP format ... Try to ungzip and then zip its content and see if the bean works for it
Rgds
Chris -
Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy
Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team -
Can some one help me with this project
This project will simulate the behavior of an Integrity Subsystem in validating the data in a database.
More specifically, assume there are 2 tables, A and B, in a given database. Table A has 4 integer
attributes names a, b, c, d and table B has 4 integer attributes named e, f, g, h.
Your program is to input up to 20 integrity rules as discussed below, and store them in some internal
format of your choosing. Then enter up to 15 tuples for each table. For each tuple, check it against all the
applicable integrity rules and print out an error message for each rule that is violated. If no rules are
violated then print a message saying all it well and enter that tuple into the database. Do not enter a tuple
into a database if any rule is violated for that tuple.
There are 3 different types of integrity rules: Primary key, Foreign key, and Attribute.
The formats for the rules are given below:
Primary key: rule#, P, tablename, attribute name
1 A or B a,b,c,d,e,f,g, or h
The meaning of this rule is that the specified attribute name of the specified table is the
primary key of that table.
Foreign key: rule#, F, tablename, attribute name, tablename, attributename
2 A or B a,b,c,d,e,f,g, or h A or B a,b,c,d,e,f,g, or h
The meaning of this rule is that the first attribute name and tablename is a foreign key
referencing the second attribute name and tablename.
Attribute: rule#, A, tablename, attribute name, low value, high value
3 A or B a,b,c,d,e,f,g, or h 0-9999 0-9999
The meaning of this rule is that the attribute name in the specified table always have a value lying
in the range of low value to high value inclusive.
Your program should implement at least the following 10 rules
Rules:
1 P A b
2 F A d B g
3 A A a 10 20
4 A B h 8 9000
5 P B g
6 A B g 0 100
7 F A c B h
8 A A b 10 30
9 A B e 0 80
10 A A a 8 30
Page 2 of 3
The following data is provided for your convenience to test the correctness of your program. Remember I
will use these data and some other new data for the testing.
Tuples: (Insert in this order)
A 8 32 30 50
A 10 20 30 40
B 5 20 50 100
B 8 30 40 200
A 10 20 100 50
A 10 22 100 40
A 8 32 30 40
B 30 40 50 60
B 80 2000 0 0
A 9 25 200 50
A 12 25 60 50
B 0 0 0 100
A 10 10 10 10
A 20 20 200 40
A 0 0 0 0
B 0 0 0 0
B 50 50 50 50
Specifications:
1. You can just represent the provided 10 rules and new rules created by yourself in some
internal data structures. Or you can store the rules in a text file and then read it one by one.
2. The test data must be stored in a text file �tuples.txt� in which each line has one tuple and
field items are separated by one or more blank spaces (not comma, or colons).
3. Bring a project report at the beginning of the class on the due date. The project report
should have a summary on how you finish the project. For examples, you should discuss
some key data structures you chosen to store the rules and tuples, how you check the invalid
tuples and insert valid tuples, and so on. I hope that after reading the report, I should get some
ideas how you finish the project even without reading the source code.
4. Also you should print out source code and include in the report. In addition, you need to
copy the execution output results. I give a sample expected output for your reference. You
can change it in any way but just make sure it is clear to read for users.
Sample Outputs (for simplicity only three rules used in this example):
Integrity Rules (total 3):
1 P A b
2 F A d B g
3 A A a 10 20
Tuples: (Insert in this order)
T1: A 8 32 30 50
Page 3 of 3
T2: A 10 20 30 40
T3: B 5 20 50 100
T4: A 8 25 40 100
Results:
T1 is invalid (against rule 3), discard it!
T2 is valid, insert to DB
T3 is valid, insert to DB
T4 is invalid (against rule 1), discard it!
Summary:
2 tuples (T2, T3) are inserted to DB
2 tuples (T1, T4) are discarded
5. Bring a floppy disk containing the source code and the project report word file. It should
only have one directory named as your �Firstname.Lastname� For example, if your name is
John Johnson, the directory name should be �John.Johnson� in the root (your wku email
should be [email protected] also in most cases).
Create a subdirectory �Report� to store the report word file. The report name can be
�CS543_Project_2_Report�. Then create another directory named as �Code� to keep all the
necessary files to run the program without any further configuration (including �tuples.txt�).
6. Submit a zip file which contains all the files in your floppy disk to the �Digital Drop Box�.
The zip file name must be �Firstname.Lastname.zip�. For example, if your name is John
Johnson, the directory name should be �John.Johnson.zip�. So if I unzip the file, I should get
exactly same files as the floppy disk.
7. Follow closely �Program Scoring Rubric For CS Dept� and �Writing/Documentation
Scoring Rubric for CS Dept�. Your project grading will be based on these two guidelines.
At least, your code should have a perfect and consistent format style and include sufficient
comments (generally > 20%) which explain possible confusions clearly. Also always try to
use constant variables to denote numbers. For example, if you created 20 rules in total, you
can define a constant variable such as in C++ �#define TOTAL_INTEGRITY_RULES 20�.So what is your question?
People here are not generally inclined to read your homework, and then read your mind to find out what's giving you trouble.
If you're absolutely lost and have no clue where to start, you should speak to you instructor or engage the services of a private tutor. These forums are simply not an effective venue for that kind of help.
Otherwise, take your best shot, do as much as you can do, and then post specific questions about the specific bits that are giving you trouble. Be as thorough and precise as possible about what you're trying to do and what didn't work. Copy/paste the complete text of any error messages. Add println statements to your code and include comments like "I expected it to print xyz here but it printed abc". -
Unzipping Files in the wrong folder
Hi
I am trying to unzip files. It works fine except that it unzips the files at the root. So i have tried specifying the path for making the directory (in which the unzipped files are stored). But that doesnt seem to work. Now i am unable to find the unzipped files. CAN ANYONE HELP PLEASE
public static void unzipFile(String zFile)
Enumeration entries;
ZipFile zipFile;
try {
zipFile = new ZipFile(zFile);
File file = new File(zipFile.getName());
String fname = file.getName();
String substr1 = fname.substring(0, fname.indexOf("."));
String filepath = "/data/psawant/temp";
File dir = new File(filepath, substr1);
try {
dir.mkdir();
catch (Exception fe)
System.err.println("Unhandled exception:");
fe.printStackTrace();
return;
entries = zipFile.entries();
while(entries.hasMoreElements()) {
ZipEntry entry = (ZipEntry)entries.nextElement();
if(entry.isDirectory())
// Assume directories are stored parents first then children.
System.err.println("Extracting directory: " + entry.getName());
(new File(entry.getName())).mkdir();
continue;
} //end of if
System.err.println("Extracting file: " + entry.getName());
copyInputStream(zipFile.getInputStream(entry),
new BufferedOutputStream(new FileOutputStream(entry.getName())));
} //end of while
zipFile.close();
} catch (IOException ioe) { }
} //end of unzip function
public static final void copyInputStream(InputStream in, OutputStream out)
throws IOException
byte[] buffer = new byte[1024];
int len;
while((len = in.read(buffer)) >= 0)
out.write(buffer, 0, len);
in.close();
out.close();
Any help is apprciated
ThanxSorry I got it this time. I had overlooked the new File. I added that & it works fine but there seems to be some problem
If the folder has another folder inside . it doesnt show that one. or rather just unzips one folder & no folders inside it. But i guess i can check for that
Thanx for u r help
Have a nice day
Maybe you are looking for
-
X201 Windows 8.1 Keyboard driver issue
I tried clean installing Windows 8.1 on my ThinkPad X201T The Windows itself installs without any issue, but for some reason the keyboard drivers seem to be out of order. They will either not load up at all, or take incredibly long time to load up. I
-
I have tried everything to get the program to see my printer. By reinstalling divice drivers for printer to reinstalling program several times. Still I can print from my printer but not scan. Any help would be appreciated.
-
Hello, I am using SAP 2007 B PL 15 and SAP user making a journal entry document but after 115 lines users unable to add new rows its happned more then one user Is there limitation for rows ? if not then how can i solve this issue please t
-
I can't turn on iTunes match on a computer
I am trying to turn on iTunes match on a second computer and it won't let me. I already subscribed to it and can see my music on my iPhone and iPad.
-
How do I back up myentire iPhoto library to an an additional hard drive, I have a WD My Book 1TB hooked up to my MacBook Pro via USB 2 port.