Updated Bios From 1.D0 to the latest Bios V1.15 Now Won't Boot?? Pleas Help

:nooo:Hello all,I have a 890FXA-GD70 Motherboard and Installed Windows 7 Ultimate.I did a Bios Update to Ver. 1.15 Latest Bios update for this board.I disabled virus protection,and did it through windows.Now it won't boot into windows at all,Gets to starting Windows,then blue screen so fast,I can't stop it to see what it says.Please anyone.Please help me get this back?? The bios screen says Bios Version V1.15 and the memory 16384M,I set the boot drive to my Kingston SSD as the first drive to boot.No Go.Please Can Anyone Help? Please Reply.Thankyou Much.

>>Clear CMOS<< and try with just one stick of ram. Also try without any drives or USB devices to see if board posts at all.

Similar Messages

I have updated to the latest itunes, and it now won't allow me to import or burn CD's or DVD's. it says it is to do with the registry settings, and that recently added cd burning software may have something to do with it.

please help!! i've recently updated to the latest itunes version. after much hassle in doing so, it now tells me that the registry settings for importing or burning CD's/DVD's doesn't work and that i should reinstall itunes. i,ve done that from the website and from a saved position, but it doesn't work. i don't want to have to delete my library to have to start again !!!! there must be another way. it also said that it might be to do with other CD/DVD burning software, but i haven't put any on my computer that itunes didn't seem to lke before

I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?

It is impossible to update the latest BIOS for Satellite L40-17S

First of all why are there so many BIOS updates in a short time? I get my brand new L40-17S (20/05/08) with the BIOS 1.70, the Tempro software from Toshiba give me the warning to update it to 1.80 that works fine, after a few day's a new warning update it to 1.90 and now 2.00 in June! The problem is that I can't update anymore above 1.80, when I click on the winflash.exe only a short screen and then nothing.
Operating system Windows Vista 32 without SP1
I really want to have the latest BIOS before I install SP1.

> First of all why are there so many BIOS updates in a short time?
Who knows seems Toshiba releases the drivers and BIOS like the Microsoft own Windows patches do you known a Microsoft patch day? ;)
I think its something similar
Another question;
Is there something wrong with your notebook?
If not, so why a BIOS update?
Ive got a notebook which is about 3 years old and there are newest BIOS updates for my notebook but I have never done a BIOS update.
Its not necessary because the machine runs troublefree

Satellite Pro A300D-161 why i can't download the latest Bios from Toshiba

Hi,
i want your help because i can't download the latest Bios for my notebook from toshiba-europe support page.
Either internet expoler 8, either firefox can't open the Bios download page.
Why is that problem? Is thre anyway to fix it?
Does anyone has the same problem with me?
Note: I'm using windows xp and the version of the bios is *3.10*v dated +30/4/2009+.
Thanks in advance and sorry for my english, mike.

Hi!
I agree with you and Jimi.
I have tried to download the BIOS for Satellite Pro A300D but it doesnt work at the moment :(
But I think Toshiba will fix this problem as fast as possible. Try it 1 or 2 days later.
Why do you want to update the BIOS? Do you have an issue?
Bye

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

Chester31,
Thank you very much for sharing your file with us! Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started? Did you update your iOS from 7.x to 8.0 recently?
We will continue investigating the problem and let you know what we find.
Thank you again for your help.

HT4972 Hi! I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.

Disable the computer's firewall and antivirus during the download and update.

HT4623 I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings- General. Pls help.

I want to update my iOS software from version 4 to the latest available version, but I cannot find the software update tab in Settings->General. Pls help.

http://support.apple.com/kb/ht4623
Sometimes older devices must be plugged into iTunes to update.
 Jackson

How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest

How to upgrade to LR CC from LR5.7...When I click on check for updates, dialog box says I have the latest/
The creative cloud dialog box that lists the applications, doesn't show LRCC

Log out of the CC desktop app, then log back in again. You should see it then.

HT201210 I wanted to update my iPad 2 from 4.3 to the latest update but I got stuck in the restoring step. I couldn't restore the iPad

I wanted to update my iPad 2 from 4.3 to the latest update but I got stuck in the restoring step. I couldn't restore the iPad.
The error message"The iPad cannot be restored at this time because the iPad software update server couldn't be contacted or is temprorily unavailable"

Hello someone9,
There are a few possible causes for this issue, sometimes it is related to Security Software, other times it is related to the internet connection. Let's follow the steps below:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
- Install the latest version of iTunes.
- Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
- Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
- Try to restore from another known-good computer and network.
- If the errors persist on another computer, the device may need service.
If the above does not resolve the issue, you can also check out this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Thanks,
Matt M.

HT201210 I accidently unplugged my I-pad 2 from my computer during the latest software update. My screen is stuck on the "update bar" screen.

I accidently unplugged my I-pad 2 from my computer during the latest software update and my screen is stuck on the "apple with update bar."
Suggestions?

Try and force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How can I restore the latest BIOS version when it doesn't appear in "Software & Drivers" page ?

When delivered, my brand new Pavilion desktop model 500-282ef was equipped with BIOS version 8014.
On the EFI\HP\Bios partition, only the \Current directory contained another version of the BIOS, an older one, namely version 8013. The \Previous and \New directories were both empty.
Experimenting with my new BIOS, I've unadvertently downgraded my BIOS version 8014 to version 8013.
Now, as you've probably guessed, I would like to restore the latest version
The EFI partition doesn't contain any installer to restore my BIOS to its former up to date version.
Unfortunately, "the drivers and update" page on HP support site does not provide any installer either.
I would be so grateful if some of the nice people here would ask HP to point me to such (probably unreleased) updater which should obviously exist.
I have saved a copy of my second Pavilion desktop BIOS using safawin.exe in the hope I could use it to achieve a restore. But I've been unable to use it to restore the latest BIOS as the restore process also requires a signature file.
Thank you very much for your help!

Yes Dave, that's what I meant: during the "downgrade" from BIOS version 8013 to version 8014, no BIOS backup files were created and I couldn't found anything in any directory of the EFI partition.
In an attempt to solve the problem, I have put manually a copy of the BIOS (v 8014) from my second Pavilion Desktop (same model, same age) in the "\New" directory. That BIOS file was created with the safuwin.exe utility.
That has been a nice step forward: Now, from the Boot page, the Firmware Management offers me the update option ("You will update from 8013 to 8014, OK?") but when I try to so, I got a error message saying that a signature file should also be present along with the BIOS file to flash.
In the EFI\HP\BiosUpdate directory I do see some signature files like HpBiosUpdate.s14 and HpBiosUpdate32.s14 which could be the signature files I need, but I have no idea about how to use them (or maybe rename them?) to allow the procedure to complete successfully.
Concerning the warranty, do you suggest I should invoke it ? Could you please clarify ? Actually my PC has no other problem than this BIOS "downgrade".
I trust that HP has in store all the files I need, which have probably been used when configuring my PC in the factory. My problem is to have these files available in the "Software & Drivers" page on HP site...
Thank you very much for your help. I stay tuned
Twain

Do I have the latest Bios?

okay, I believe I updated my BIOS.
When I ran the disk, I selected option 1 which *I hope* was the right option. It seemed
successul. I have gone to RUN> and typed in system information and get the following:
SMBIOS Version: 2.6
is that correct? I have successfully updated my BIOS?
Also, what were the two options when running the BIOS upgrade? I wasn't clear on what all the
terminology meant nad if I was doing the correct procedure or not or do I need to do both?
thanks
LENOVO 8BET54WW (1.34), 11/2/2011 - W520 Model 427639U - Windows 7 - 6.1.7601 Service Pace 1 Build 7601 - intel core i7-2820QM CPU @ 2.3ghz, 2310 mhz 4 cores - 16gb Memory

Harrisb is correct, The latest BIOS for the W520 is version 1.40.
Here is the link to see the BIOS updates for the W520, on the bottom of the site there are instructions to determine which version you currently have. You can find all of your Drivers and Updates from the Lenovo W520 Driver Matrix.
There are two ways to update the BIOS:
1. EXE file - this is what many people do because they can do it inside Windows which is more convenient. But it can also carry a certain amount of risk. If something goes wrong, you could potentially be left with an incomplete update thus bricking the machine and requiring a motherboard replacement under warranty. I recommend doing a system backup before any BIOS update or changes.
2. .ISO file - an ISO is a CD or DVD image encapsulated on the file. You can burn the file to a CD or DVD with a tool like ImgBurn. After the CD/DVD is created, you can boot the W520 from it and follow the instructions to update the BIOS. This is more of a hassle but considered safer because there is a reduced amount of risk another program might interfere with the update process and leave it incomplete.
If all of this sounds scary, I would recommend finding an IT Professional, Partner or Service professional to do this for you. All Lenovo Products come with a 1 Year Limited Warranty, if you would like to have more in depth troubleshooting or support, do not hesitate to contact your support center. You can verify your warranty status here.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

I recently updated by Photoshop Elements 10 to the latest version on my PC

I recently updated by Photoshop Elements 10 to the latest version on my PC and some of the settings are different and I cannot find where to change them. When I connect my photo SD card or iphone to import photo's, in the past, I could copy from the device to a folder, go back to the device and copy the same photo's or group to another folder. Since the update, the photo/group is not accessible to copy a second time, this is inconvenient as at times I may copy a photo or group of photo's 2 or 3 times into different folders. Any suggestions?

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Updated Bios From 1.D0 to the latest Bios V1.15 Now Won't Boot?? Pleas Help

Similar Messages

Maybe you are looking for