Updated: Rename this forum

Hello all,
Originally this forum was intended for ccBPM and Workflow. However I have noticed that 99% of posts are for workflow, and the occasional BPM post isn't answered. The confusion is because BPM is still in the title but I suspect hardly any BPM folks frequent this forum anymore. Or do they?
So I have submitted a proposal in the suggestions forum and invite you to add your comments. If enough people agree then we can get the name changed to SAP Business Workflow. On the other hand if people prefer to see XI/PI/BPM questions in here then we can keep it as is. Or perhaps it should be Workflow and Guided Procedures or any other suggestions?
The proposal is [over here|Rename "BPM and Workflow" forum to "SAP Business Workflow";, please add any comments there.
Cheers,
Mike
Edited by: Mike Pokraka on Oct 1, 2008 4:13 PM

Update:
As most of you have probably already noticed, this forum has been renamed.
Actually, that's not all that happened: a second forum was created as well, so I thought I'd drop a short note here to point out the [announcement|A new forum, and the difference between BPM, BPM and BPM] which also contains a little background on this whole BPM business.
Happy Workflowing,
Mike

Similar Messages

Should we rename this forum or add one for CRM 7.0?

Hi Stephen,
Can we have a new forum for SAP CRM 7.0 as well just like we have it for SAP CRM 2007?
Regards,
Harshit

Harshit,
Actually I'm wondering if it would be better to focus this forum more to CRM Webclient UI questions instead of just being CRM 2007. CRM 7.0 is more an evolution of CRM 2007, so the technical question set would just be some additional deltas on top of the questions right now. If you look at the PCUI we don't have a CRM 40 PCUI forum nor a CRM 50 PCUI forum.
So I'm going to make your question a sticky and rename it slightly to see if we can some more thoughts.
My initial proposal would be the following:
Rename this forum CRM Webclient ( CRM 2007 and beyond )
Add a new forum for CRM Middleware questions
After we get some community feedback, I will send in the comments to folks at SAP that manage the organization of these forums If there is a strong opinion to do something, I'm sure they will take a look and make some adjustments.
What do you think?
Thank you,
Stephen

Everyday this forum loses my email and I loose notifications

I have posted this problem here and in the forum for forum problems. NOTHING IS BEING DONE!!!!
Is there anyone from MS who cares that this is happening or get in touch with someone that can help. This happens about every second day.
Between the problems with the forum not even showing and the email problem, I think the last update to this forum really screwed up!!!
HELP!!!!!!!!!!!!!!!!!!!
Lloyd Sheen

Good topic. We're covering it over yonder:
http://social.technet.microsoft.com/Forums/en-US/28c2ec72-c561-4a92-a052-e39216245472/everyday-this-forum-loses-my-email-and-i-loose-notifications?forum=reportabug
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

Apple is more likely to see your comments if you send feedback via:
http://www.apple.com/feedback/itunesapp.html
=Downgrading from iTunes 11 to iTunes 10.7=
You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404). Alternatively:
Back up your computer first, in case the unexpected happens.
Quit iTunes.
Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394. Do steps 3 and 4. Steps 6-8 may be also useful but I don't know if they are essential. Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
Replace the iTunes 11 application with iTunes 10.7. Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved. Two ways to do this are:
1. Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
2. Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7. I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl" and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since. See:
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
- https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
- If you encounter error -42408:
iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested). A variant of this is at: https://discussions.apple.com/message/20448184
- Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

Elements 12 will not run. I am using windows 7, all updates have been made. When I try to open it up, it loads at first, then closes, and will not open up again. I need help with this, as I have not found a single answer in this forum that works.

As stated, I just downloaded elements 12. Every time i open it up, it gets to the organizer home screen, then shuts down. After this, it will not reopen. I have made all the updates to my windows 7, and I have searched this forum and have yet to find an proper solution to this issue, and by the looks I am not the only person with this issue. Anyone's help would be greatly appreciated.

My post has been viewed 24 times, and yet have had no answers. I have always like adobe products, however if this is the type of support they offer, I will never purchase another product of theirs. The issue I am having is the same issue many others have had, and yet no answer. Poor customer service!

Working w/adobe cs6 - it now won't update adobe acrobat. Adobe found that I am not registered in a sudoer file and said that I had to call Apple. They said I should submit it to this forum.

I have installed Adobe cs6. After doing so, Adobe Acrobat will not update. I have been trying to solve this problem with Adobe now for 3 months. Today they say they discovered that I was not in a file named "sudoers file." They told me they could not solve that but that I had to call Apple for a solution. I called Apple and they told me that they could do nothing about it (I'm still not sure whether or not they even admitted that it is one of their files). They suggested coming to this forum for a solution.

Their latest is that my file is not registered in sudoers, whatever that is
There are two files named sudoer.vim on my drive (each in a different folder). They're text files. Both are very well hidden and the contents of either would mean little to anyone not versed in terms used in the text. What Adobe could possibly mean by "your name not being in the file" is anyone's guess. My actual name or user account name isn't in any of the files, either, and my apps work just fine.
There is another text file named sudoers (no file extension) that appears to be a list of who has sudo privileges. But again, it's well hidden, requires an admin password just to open it, and means nothing without knowing what to modify, or how without ruining the file.
Which kind of leads back to this:
"Adobe Acrobat application was modified."
Have you run Monolingual or other utility that removes foreign languages from the drive? If so, you can't let it touch certain apps (like anything from Adobe) or you will run into problems like this. Usually, Acrobat won't even launch if pieces of it have been removed, even if those pieces are completely unimportant.
If nothing else, just reinstall Acrobat from the original disk or downloaded .dmg purchase.

Can't activate my Premiere 1.5. ( updated to 1.5.1 ) Adobe sent me to this forum for help

After I format and reinstalled my programs I can;t activate my Adobe premiere pro 1.5 ( updated to 1.5.1) .
I contacted Adobe at their home page Contact Customer Care , and they send me to this forum for answers.
Can somebody please help in a dummy language. ( I do not understand a lot of the technical language )
Thank you in advance.

that's too old to activate. you can use cs2, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I want to update to 3.6.4 but don't want to risk the problems container.exe is causing that am reading in this forum.

There are quite a few having problems related to container.exe due to updating to 3.6.4 as I see from this forum.
I don't have video problems, never did, and sounds like if I update, it's going to start having problems..
It is possible for ff to make a patch so that we can have a user friendly and safe disable (without system code?)
I appreciate firefox very much and thank you developers for your hard work and care.
I just don't want to update until this is stable..too risky..
Thanks!
== Operating system ==
winvist

Also be aware that if you add a quiz to the project, that the drag and drop and quiz affect each other.
In a way we have been cheated into thinking that is also a learning tool for repeated attempts. With a quiz in the project it does not work.
I also tried it without the quiz. When learners now use it, the drag and drop will "hang" at times. EMBARRASING when a client phones you with a stuck learning session!!
I have spent hours with the online Adobe dudes. It some or other "buG".
"BUG" is IT code for "we designed something but did not test it well enough and now we pretend that it is some mysterious organic organism that is maliciously undermining our design"

Why this forum still exist? Rename to 'Windows 7'

This forum is irrelevant now.
There's an upcoming new Windows version, Windows 7.
Right now there's a Release Candidate for download. And even Creative, for the first time in years, is doing things well developing a Stable Beta driver for this OS.
Creative should create a new forum called 'Windows 7' on this board, or rename this 'Windows Vista' forum to 'Windows 7' to regroup all messages, problems and fixes regarding the Beta X-Fi Drivers and Windows 7. Even, other Creative Hardware like PMP or Webcam and the Windows 7 compatibility could be discussed here.
The goal should be have a complete final stable drivers for all X-Fi products, soundcards and other Hardware at Windows 7 official launch, like NVIDIA, ATI/AMD or other Hardware compaines.
Cheers.

Well Ekodaniel,
You are having problems after SP2, I am not. One of us is doing something right. You may have an issue with something else going on in your system, like
An Nvidia chipset motherboard, poor chipset drivers for your IDE/Sata controllers, old drivers on your system in general, or old bios, or new bios not setup properly for your card. If you find this hard to believe, how is it that I have no problems with my X-FI Titanium or X-Fi PCI Fatality and you do
If you have an extra hard dri've lying around, you could install Vista, Sp and then your sound hardware. Test everything, see if it functions. Then install SP2, reinstall your X-FI 2.0 Dan K. driver/applications pack and then see what happnens. I think if you rule out all software but operating system, service pack, and then drivers, you will be good to go.
This sounds like a lot of trouble but at least you will have your final answer and rule out any offending applications that you may have installed on your system, since your last format and install.
cheers,
jmacguire

This forum will be renamed "Solaris 11 for Sysadmins"

We won't remove the Solaris 11 Express discussions, we'll just start adding Solaris 11 discussions.
Please try to specify whether your question applies to Solaris 11 Express or Solaris 11.
Let me know if you have any questions.
Rick
http://www.oracle.com/technetwork/systems/index.html
Edited by: rickramsey on Nov 2, 2011 10:19 AM

We had a delay in implementing this change, but it is still our intention to shut this forum down in favor of the Java 3D forum on java.net. We hope to do this within the next two weeks or so.
Please migrate to the java.net forum by following the above instructions before that time. Let me know if you have any questions.
Kevin Rushforth
Java 3D Team
Sun Microsystems

This forum will be renamed Solaris 11 for Developers

We won't remove the Solaris 11 Express discussions, we'll just start adding Solaris 11 discussions.
Please try to specify whether your question applies to Solaris 11 Express or Solaris 11.
Let me know if you have any questions.
Rick
http://www.oracle.com/technetwork/systems/index.html

We had a delay in implementing this change, but it is still our intention to shut this forum down in favor of the Java 3D forum on java.net. We hope to do this within the next two weeks or so.
Please migrate to the java.net forum by following the above instructions before that time. Let me know if you have any questions.
Kevin Rushforth
Java 3D Team
Sun Microsystems

HT201210 When I try to update my iphone to the latest iphone software on my MacBook in itunes a message displays "This iphone cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable.

Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers

Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum.

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

Erdygirl please be aware you are posting to a public forum. I have removed your personal information from your previous post.
Please check your account at http://www.adobe.com/ to locate your serial number. You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Does anyone know if there is a plan to make this forum a better product?

there are quite a few problems with the structure of this forum.
maybe it is time for an update.
1. doesn't appear to be any attrempt tp consolidate responses of various identical topics
2. statistics are poor and incorrect (should always indicate lates response, should show latest response first - by default, should clearly indicate number of responses for each item, etc)
3. many more items - but insufficient time to nanalyze and document
this is not a criticism of the moderators who take the time to help others but it does newed to have a method of getting Apple's attention when there is no solution/approach to a serious product defficiency.
advisng users to use the Apple support link is like getting close to a black hole.

I am sure they are always looking for ways to improve. The current "Apple Support Communities" replaced the former "Apple Discussions" about a year ago, there were a number of changes that came with it, some good, some not so good, IMHO. About a week or two ago they made some other changes, the most visual was getting an email when a post is marked as solving the question or being helpful. Like any change, some people liked it, some didn't. But I am certain they are looking to make this forum a better product.

Updated: Rename this forum

Similar Messages

Maybe you are looking for