Upgrade from 10.1.2.0.0 to 10.1.2.0.2 is not support ??!!

I was hoping to be able to upgrade our App. Server from 10.1.2.0.0 to the 10.1.2.0.2 version which now includes Forms and Reports, but Oracle is saying that there is NO upgrade path from 10.1.2.0.0 to 10.1.2.0.2 . I find this very disconcerting, as it seems that oracle is not supporting an upgrade path for 10.1.2. I'm still waiting on an answer from metalink about upgarding from 10.1.2 to 10.1.3 . Does anyone understand why 10.1.2.0.0 can not be upgraded to 10.1.2.0.2 ? I assume that 10.1.3 will include Forms and Reports, but I'm not sure, does anyone know ?

All fixes added in 10.1.2.0.2 to components available in 10.1.2.0.0 and 10.1.2.0.1 will be available in the upcoming 10.1.2.1.0 patch set.
10.1.2.0.0 did not contain the BI & Forms installation type; this does not change by applying the 10.1.2.1.0 patch set. 10.1.2.0.2 provides stand-alone version of both BI Discoverer and Forms and reports, but you will not be able expand a 10.1.2.1.0 installation to BI&F using the 10.1.2.0.2 CDs.
10.1.3 will not contain Forms and Reports.
Regards,
Mathias

Similar Messages

  • I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
    1. Make sure that the right volume is selected in the Startup Disk preference pane.
    2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
    3. Reset the System Management Controller.
    4. Reset the PRAM.
    5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
    /var/folders
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

  • I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    Hello GuynStPete,
    Thanks for using Apple Support Communities.
    I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Take care,
    Alex H.

  • When a file with extension .htm as a product from Epilex is opened, there was a notify a screen, "This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer"

    My company has decided to use Epiplex software.
    But when a file with extension .htm as a product from Epilex is opened, there was a notify a screen,
    "This epiLearn is not supported on Netscape browsers. epiLearn supports Internet Explorer 5.5 or above. Please launch it in Internet Explorer".
    I prefer to use Mozilla than Internet Explorer. Would u please handle Mozilla browser along this problem to be available in this matter?

    This might be simple but it works well for me.
    1. 
    Right click on the tool bar in IE8 and uncheck adobe PDF to disable.  Click yes when it ask if you are sure.
    2. 
    Open Adobe
    READER located in the start menu.
    3. 
    Click on Edit and then on Preferences.
    4. 
    Select the "General" category.
    5. 
    Click on "Select default PDF handler"
    6. 
    Adobe Reader should be already selected. Change it to reader if it is not.
    7. 
    Click on "Apply" and except changes.
    8. 
    Restart the computer and you are done.
    Now you can open and save PDF's from IE8.  Once you save it, you can right click and "open with" Acrobat if you choose. 
    Be careful to not make Acrobat the default or you have to start over.
    You can still create PDF's from docs, scans, and picture like before.  You might think this is a work around but it really isn't. 
    Some forms that are available on the internet can't be opened by Acrobat for security reasons.
    Good luck!      P.S. I am not an IT tech but I play one on TV.

  • Upgrade from free EE to EE monthly pay (Samsung S6 edge) and it does not work

    Hi, Today 28th of July, I upgraded from a free EE iphone 4S which i bought back in December 14 to a Samsung S6 edge.
    Same operator. Same number. BUT I can't use it as it shows only "Emergency calls only". I also can't use my former phone as the mobile service has been disabled on it. The salesperson at carphone warehouse said that my contract would run the moment he finished my application (which was midday). SO I have paid for a service which I cannot use. I need my phone for my job.I would like to speak to someone at EE but as I don't have a phone I will have to use my work's phone which I am not allowed to do.
    I feel disatisfied, very disatisfied by EE and it's not the first time. They are cheap but It seems that they do everything to disgust you from using them.
    Regards,

    Hi,
    Carphone warehouse lied and it is not the first time if you read other peoples posts. EE are not responsible for them and they need to make the request to EE to transfer your account over I suspect to a new sim?
    It can also take up to 48 hours at busy times and is obviously from the time CPW make the request.
    Thanks,

  • Upgrade from 12.1.1 to 12.1.3 now Find Service Request does not work.

    I recently upgraded our Test machine from 12.1.1 to 12.1.3 (RHEL 4.8). After performing the install and applying appropriate patches and most recent CPU when I attempt to 'Find Service Request' I can search by number, choose the correct SR I want in the form and click open. However when the SR form opens it just defaults to a new SR instead of the one returned in the search results. I have generated all form files again and that did not change anything. I have searched and not come across anything that appears to be applicable. Anyone have any ideas?
    Thanks

    I am logged in as myself and using the 'Service' responsibility.
    Service -> Service Requests -> Find Service Requests
    versions:
    CSXSRISR 120.208.12010000.84
    I do the search and I find it, however when it goes to open the result the sr form is as it is new.
    Oddly enough if I go under sysadmin and use the same responsibility, same path and search the sr will open the returned result.
    As sysadmin however it has a different layout in the 'folder' at the top of the screen. Could this be causing the difference or should that matter?
    Thanks

  • Itunes 11.1 upgrade from itunes version 10.6.3, OS v. 10.6.8, will not work

    Please help if you can.  Bought a iphone 5s.  Need itunes 11.1 to activate and backup.  Needed to upgrade the OS to 10.6.8 from 10.5.8 on older macbook pro.  Installed sucessfully.  Downloaded itunes 11.1 from apple site.  Installed it.  Installer says it was sucessful.  Open itunes, and it is still version 10.6.3.  Tried numerous times, same results.  Please help.

    Open iTunes directly from the Applications folder.
    (90456)

  • Upgraded iphone 4 firmware from 4.3.3 to 5.01 and now it says sim card not supported now

    i just upgraded my iphone 4 firmeware from 4.3.3 to 5.0.1 and after it restarted it says that the sim card doese not appear to be supported.  i already went to the att store and they inserted a new card and tried to activate it and it says the same thing.  my phone work great before the upgrade to the firmware and i read that lots of other people have had the same problem and brought there pnones into an apple store and had them replaced due to the faulty upgrade. what can you do for me

    This is a user to user help forum only, so no one here can do anything for you except provide recommendations.
    Have you tried restoring your iPhone with iTunes?
    If so with no change, make an appointment at an Apple store if there is one nearby.

  • I recently upgraded from a Droid X to the LG Spectrum 2. Why can I not send messages?

    I recently upgraded to a LG Spectrum 2 and have been having trouble sending messages. It either takes a REALLY long time to send a message or it doesn't send at all. It seems I had better service with my old Droid X. Does anyone know why the slow message time with 4G?

    smjlj56 wrote:
    I recently upgraded to a LG Spectrum 2 and have been having trouble sending messages. It either takes a REALLY long time to send a message or it doesn't send at all. It seems I had better service with my old Droid X. Does anyone know why the slow message time with 4G?
    Call Verizon Tech support from another phone
    800-922-0204
    They can troubleshoot the issue with you.

  • Upgrade from trial xi pro to full - asks what "i currently own " but trial not in list?

    have the trial xi pro adobe but want to upgrade now, how do i do this and what do i currently own in the drop down list?

    When you buy an upgrade, you have to choose what you already own - an older version of Acrobat. If you have the trial and want to license it, that's not an "upgrade" (otherwise nobody would ever need to pay full price).

  • Loaded upgrade and it wont open/You cannot open the application "Firefox" because it is not supported on this architecture.

    downloaded your latest upgrade.
    Running on mac os 10.5.8
    Power PC G5 dual 2 GHz
    8 GB DDR SDRAM

    I suggest yo change you system requirements: This is what is advertised
    Operating Systems
    * Mac OS X 10.4 and later
    Minimum Hardware
    * Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor
    * 128 MB RAM (Recommended: 256 MB RAM or greater)
    * 200 MB hard drive space
    Im running
    Model Name: Power Mac G5
    Model Identifier: PowerMac7,2
    Processor Name: PowerPC 970 (2.2)
    Processor Speed: 2 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 8 GB
    Bus Speed: 1 GHz
    Boot ROM Version: 5.0.7f0
    Serial Number (system): CK347009QEB
    Hardware UUID:
    SystemVersion 10.5.7 (121)
    This is way above your so called system requirements
    This has not solved the problem, but now forces me to use Safari

  • How can I get my stereo to play music videos from my Ipod Nano?  It comes up with the message "This device not supported".  Strangely my Iphone IS recognised.  The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

    How do I get my Ipod to play music videos through my theatre system?  I keep getting the message "This device not supported".  My theatre system WILL recognise my Iphone however.  The theatre system, Ipod, and Iphone are all less than 4 months old.  Any suggestions welcome!

    Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • Tag issue when upgrading from PSE 7 to 11

    I've upgraded from PSE 7 to 11 and the tags for people, while there, do not appear in the "people" section fo PSE11. Any suggestions on how to get them all to show?

    In PSE11, people tags have been moved to People view, this view contains all people tags along with categories. In case you want to view them along with tags panel, it can be enabled through View->Show People in Tag panel.

  • How to upgrade from PI 7.1 SP8 to PI EhP1

    Hello
    We plan to upgrade from PI 7.1 SP8  to PI 7.1 EhP1,but  we do not know how to apply it. ..
    Please tell us the obtaining destination of the material of the installation guide etc.
    any other info that you can share.

    refer this link for details about new features for Enhancement Package 1 of the new release SAP NetWeaver Process Integration 7.1 will be presented. This will cover the new functions planned for the Enterprise Services Repository , Services Registry, and the Service Bus.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b054300d-6b36-2b10-6187-86065808e88e]

Maybe you are looking for