Upgrade with XPRA ERRORS message at xpras_upg
Hi,all
I am upgrading sap ERP 4.72 (win2Ksql2K_sp3) to ECC6(win2003sql2K+sp4). Prepare is sucess.When the upgrade process is running xpras_upg,I got error message below.
XPRA ERRORS and RETURN CODE in SAPR700ZE1.PRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A2EESMMSS_ANALYZE 000 SQL error "446": "Cannot resolve collation conflict for concatenatio" "n operation." " "
2EEPU133 Errors occurred during post-handling "MSS_SDBP_AFTER_IMP" for "SDBP" "L"
Long text:
Cause
During the upgrade, import post-processing &V#& was performed for
object &V#& &V#&. Errors were reported.
System Response
The upgrade is interrupted.
What to do
You will find the error messages for post-processing &V#& directly
before this message. First read these error messages and the respective
long texts. You will find further information there on correcting the
errors.
If this information is not sufficient, look for error notes in the
SAPNet - R/3 Front End. Keywords you can use for the search are
the name of post-processing &V#& or
the message numbers of the preceding error messages. The message number
appears in the header of the long text display.
If you enter a problem message for the error, enter the following
information:
the name of post-processing &V#&
the message numbers of the preceding error messages
the components in which the error occurred
2EEPU136 The errors affect the following components:
Long text:
Cause
During the upgrade or import of a transport request, errors occurred
which affect particular components of the SAP System.
The following messages list the components in which the errors
occurred.
System Response
The upgrade or import of the transport request is interrupted.
What to do
Read the preceding error messages and their long texts for more
information on correcting the errors.
2EEPU137 "BC-DB-MSS" ("Microsoft SQL Server")
Long text:
Cause
During the upgrade or import of a transport request, errors occurred in
the component
"BC-DB-MSS" ("Microsoft SQL Server").
System Response
The upgrade or import of the transport request is interrupted.
What to do
Read the preceding error messages and their long texts for more
information on correcting the errors.
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I have searched in sap notes and SDN,but no help to me.
Can give me solution?
Thanks a lot.
Sorry,I have solved this problem.
The version of my sql is sql2k with sp3 before,but sp3 only support CP850_BIN. After sp3,microsoft support CP850_BIN2 and BIN.
The default installation of the sql2k sp4 software from sap is supported CP850_BIN2 .
So,the versionof the sql server is BIN,and database is BIN in my ERP 4.72. Then I install sql2k with sp4 with BIN2,and database is BIN.
I must change the BIN&BIN2 with instcoll.exe.
More information,please read note 505906,600027.
Thanks.
Wensent Lee
Similar Messages
-
App runs in Eclipse environment but not from jar file with no error message
When I upgraded my jre to 5.0 my app does not run. After fixing the properties problem I had a few days ago it is now at least compiling and running within Eclpse
However, when I export to a jar file it runs to a certain point and then just goes away with no error message!!! I've narrowed it down to the exact point where it dies but don't understand why it dies and especially gives me no errors whatsoever. It just goes away.
It is creating an instance of a new class when it dies.
Can someone please help me?Ok, well it doesn't. Anyway, I'm still having the same problems. I can run my jar file to a certain point and then the application just stops. I know this because I've put come message boxes in the application to let me know where in the app the system is.
It always dies when it is instantiating the new class called HeidiFrame; done by:
HeidiFrame heidiFrame = null;
if I put code in between the above line and before the below line, this code will work fine
heidiFrame = new HeidiFrame();
but if I put code after the above line, nothing happens
As I said this all worked fine until I upgraded to Java 1.5
If you look at http://java.sun.com/javase/technologies/compatibility.jsp there are 23 compatibility issues with the new release. We're using xml stuff so that was my first problem and the code wouldn't even compiile. Once I added in libraries, the code compiled and ran beautifully.
However, when creating my jar file so I can deploy this application , I've discovered that the jar file will only run to a certain point, as I've stated previously. So, that's my problem. Not that I can't run it from the command prompt, which I can't, but it's a gui application. I've tried changing things in the classpath file and the manifest to no avail. Nothing changes. The application starts but when it goes to instantiate the HeidiFrame class, which is the class that actually builds the gui it dies and goes bye bye. -
DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE
Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GKRead the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version. -
Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.
Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated. -
Trying To Upgrade Phone - Getting Error Message When I Try To Upgrade to Incredible
I'm trying to upgrade to the incredible on the web site and it comes back with an error message. I tried all other phones and I could select them fine.
Thoughts?OK think I figured it out. says I need to change data plan. If I just get the pre-owned one it doesn't say that. time to call support.
-
Why does labview 2009 32-bit closes up with no error message?
Hello.
I am developing an application using a PCI-6534 board, Windows XP SP3, and LabVIEW 2009 32-bits. In this application I am generating a 300 Hz signal using the P2.0 digital line. I am trying to make digital acquisition using the P0 port (8 bits), using N-sampling. The program that generates the 300 Hz clock, works with no problem. However, when I start running the program that performs the data acquisition, LabVIEW suddenly closes up with no error message. The LabVIEW windows just disappear from the screen.
As for me it looks like a LabVIEW bug.
In case anyone decided to help me, I could attach the programs so that you could check them.
What can I do to solve this problem?
Thank you.I had the same problem with one of our applications. I supplied gigabytes of process monitor and desktop execution toolkit logs, but nothing was resolved. I upgraded from WS2003 and LV2009sp1 to W7 64b and LV2010, per NI's recommendation but the problem persists. I had the corresponding service ticket open for 3 months where NI said the application ran fine for them on W7 with 2010. (long story)
I understand your frustration, and I recommend getting your local application engineer involved as an advocate with application support.. If you pay for service, pound on them to provide it. My $0.02. -
Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE
http://support.apple.com/kb/TS3281
-
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
Firefox 31 hangs on startup with no error messages
Simply put, Firefox hangs right on startup. I see it loading the two generic tabs and then the wheel spins and then it says 'Not Responding' on the top of the window. I have to force close it each and every time, and I've also tried the following solutions in no particular order to alleviate the issue:
1) Ran SuperAntiSpyware and Malwarebytes last night for any possible infections. Reported back with nothing.
2) Booted my laptop up in Safe Mode (with networking) and still couldn't get it to operate.
3) Performed several clean uninstalls and re-installations which also included clearing out the profiles altogether and then trying to open it again, nothing.
4) Booted up Firefox by holding down the shift key and resetted it to its default settings and then tried firing it up again. Nothing.
5) Attempted booting up FF in Safe Mode with the shift key, nothing.
6) Created a new profile and tried booting FF, nothing.
7) Read this article http://kb.mozillazine.org/Firefox_hangs#Hyper-Threading about Hyper-Threading and followed the instructions which got it to operate, but I can't access the toolbar or the option menus. When I click on options Firefox closes with no error messages. I have a feeling this isn't the issue at hand but I figure I'd try it and at least I can get it to fully load and not hang.
8) Deleted all Firefox extensions and Plug-ins, nothing.
9) Enabled Firefox through firewall and antivirus settings, nothing.
10) Updated my BIOS firmware as suggested in #7, nothing.
I've done almost 10 different things and I still can't figure out why Firefox keeps hanging on startup. I've looked into Youtube videos for tutorials and others posted about the Java crashing that was happening in an earlier version of FF. Since its not crashing, I'm unable to look into the crash logs and pinpoint a crash number or anything because it just freezes and when I click to close it I get a message saying: 'Close program' or 'Wait for it to respond.'
I'm running a 64 bit Windows 7 on an HP Pavilion g6-1c44wm Notebook PC
Microprocessor 2.10 GHz Intel Pentium Processor B950
Microprocessor Cache 2MB L3 Cache
Memory 4GB DDR3 SDRAM (1 DIMM)
Memory Max Maximum supported = 8GB
Video Graphics Intel HD Graphics
Video Memory Up to 1696MB
Hard Drive 500GB 5400RPM)
I'm trying to be specific as possible! Please help! I'm at the end of my rope here!Try to completely uninstall firefox, that means to '''delete''' the [http://kb.mozillazine.org/Installation_directory#Windows Installation directory] located for your 64bit in C:\Program Files (x86)\Mozilla Firefox\ , also, '''delete''' the C:\Users\<username>\AppData\Local\Mozilla\Firefox and '''if exist''', '''delete''' the C:\Users\<username>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox.
then download and install again a new full installer from : https://www.mozilla.org/en-US/firefox/all/
disable firewall and antivirus and antispyware for a little bit, and run firefox. any luck ?
thank you -
I plugged my ipod touch into my computer to sync it and it came up with an error message saying that it encoutered an internal error and it refused to sync.
I then unplugged it and plugged it back in and this time it told me that I needed to restore from a backup or set it up as a new ipod. I tried to restore from a backup but it came up with the error message "Backup session failed" every time. I then looked on my ipod and all of my music and movies are gone though it still says that they are on the ipod in itunes. I decided to use the restore function and let that finish. After restoring it still doesn't allow me to sync or back up and The music and movies can still not be seen. I am currently attempting to copy the music and movies to my ipod though this did not work with my apps as they transfered but when I attempted to open them they just crash... If someone could please help me it would be great. It is driving me crazy.If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups -
After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
HT1339 My ipod won't restore. It keeps coming up with an error message.
My ipod won't restore. It keeps coming up with an error message. that says "The iPod '_____' cannot be restored because it contains files that are in use by another application." How do I fix this?
The only thing that's open is my itunes, so i don't see how anything on my iPod can be in use by another application.
It also does this when I try to eject it, so I end up having to just unplug it instead of ejecting it, which I know is not good.
And if it matters, sometimes I plug in my iPod and it doesn't register on either the iPod or in iTunes that my iPod is plugged in, so sometimes I have to re-plug it in. And my iPod these days will continue to say that it's syncing even though iTunes will say it's finished.
Please help me!Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod. -
When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?
I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.
-
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.
Maybe you are looking for
-
Using CreateTime and RETIRETIME in a temporal query instread of WM_VALID
Hello every one! I created a version enabled table using the workspace manager that supports both the valid time and transaction time. I implemented a really simple temporal query: SELECT ID as instanceID, WM_VALID as VT, num FROM Employee AS OF TIME
-
IPhone icon disappears in iTunes when attempting to sync.
When I plug my iPhone 3G into my Macbook Pro the iPhone icon pops up in iTunes as it should and it begins to sync. However, after a few seconds the icon disappears although the phone still says "Sync in Progress." I end up having to cancel the sync f
-
my son lost his iphone. trying to tracking it by my pc computer and dont know how. his gps is on. how do i do this?
-
How to check if iphone 4s bought in USA with verizon cmda can work in Argentina with Movistar
Hi, I bought to my sister, who lives in boston, and iphone 4s, The company that originally unlocked it is verizon and is cmda. Do you know if there a way to activate it in Argentina. My company is Movistar. Thanks in advance. Carla Bongiovani
-
Premiere elements 8 - Audio stops midway through timeline playback
Hi Everyone... I am editing together a series of mp4 shots with a separate mp3 audio soundtrack. The audio from the vid shots is turned down or off and the music is on the soundtrack channel.... I am on an HP Notebook w/4 gb ram, windows-7 64bit, 32