Upgrading Planning from 11.1.2.1 to 11.1.2.2 BR/Calc Manager Issue

Hi Gurus,
I am attempting to apply the 11.1.2.2 maintenance release to my 11.1.2.1 environment however I have a question that I cannot find the clear answer to. We have never used Calc Manager so it was never installed. I have already applied the maintenance release to my servers however I have not configured them yet as I do not know what to due about Calc Manager as I was not able to select it during any part of the process. It displays as not installed and I cannot modify my existing home to install it so how am I to migrate the business rules to Calc Manager. The documentation does not state that I need to install Calc Manager prior to applying the maintenance release (I assumed that it would install as part of the process).
How do I resolve this situation? Is it even possible to install 11.1.2.1 Calc Manager into an environment that has not been configured and is at 11.1.2.2?
Thanks in advance.
Gerald

Really you should have installed Calc Manager 11.1.2.1 before the maintenance release, then when you applied the maintenance release it would upgrade the business rules to Calc Manager, I am sure you would have read that business do not exist in 11.1.2.2
You will be able to install Calc Manager 11.1.2.2 on top of your existing environment 11.1.2.2 and then deploy it though you will not be able to access your original calc manager rules.
Did you take an export of the business rules in calculation manager format or do you have access to the rules on another environment.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Business Rule calc manager issue while executing through Planning Smartview

    Hi,
    I am working on Hyperion Planning 11.1.2 and I have created few business rule in Calc manager. When user is opening it through Hyperion Planning webforms its working fine.
    I have attached the rules on webform and they run on Save and use member on data form and Hide prompts.
    All these properties are checked. So user enter the number on Planning webform and hit on save rule will cruch on the POV members.
    Please help me on below 2 issues:
    1.When user is using the Smartview Planning and opening webform in Smartview while exceuting the rule its throwing error. Can't run the rule.
    What is the exact provsiong I need to give so that they can execute it from the Hyperion Smartview Planning also.
    Currently HBRAPP is Interactive user
    and Application level is Interactive user and Essbase write access
    If I am giving Administrator access they are bale to run the rule, I can't give Administartor acess.
    2.While running rule even with admin access its not taking the POV, its taking the default mebers which I have given while creating the variables.
    However from Planning web it takes the POV selection of webform,
    Please suggest why the same thing is not happening from Hyperion Smartview.
    Thanks in advance
    Pankaj

    Please advise on this issue. Any help would be highly appreciated.

  • Upgrade Planning from 11.1.2.0 to 11.1.2.1 on new environment

    Hi guys,
    We recently got a requirement that we need to install a completely new environment for Hyperion Planning 11.1.2.1. The old system is with 11.1.2.0 on a separate network.
    The installation and configuration document says 11.1.2.1 is a maintenance release. I also couldn't find the 11.1.2.0 -> 11.1.2.1 upgrade path. Does this mean we have to install 11.1.2.0 in the new environment then performance "in place upgrade" to 11.1.2.1?
    What is the recommended upgrade method from 11.1.2.0 to 11.1.2.1 if the deploy to a new environment?
    Thanks,
    Fred.

    Thanks for your reply John!
    The 11.1.2.1 version is required to be installed on a separate network. If we follow the official route that means to install 11.1.2.0 -> Migrate -> apply maintenance release to upgrade to 11.1.2.1. This would be the last option we want to go with... The 11.1.2.0 installation files are not available from Oracle any more.
    I still have a few questions about the other options.
    Option 2: Clean install of 11.1.2.1 -> Create empty planning apps -> Clone planning apps relational database
    Question: After all the steps above, do I need to perform "upgrade" for each app inside of planning?
    Option 3: Clean install of 11.1.2.1 -> Create empty planning apps -> Use LCM to migrate the content
    Question: Will LCM work between 11.1.2.0 and 11.1.2.1? I personally had some bad experience with LCM when the target and source system is not 100% identical.

  • Is there an upgrade plan from 3G till 3Gs?

    I bought my iphone 1 year ago here in Sweden. There is no info yet about the 3GS phone on their site,but what is the general upgrade plan? Do I have to return my old phone to get the new one? Or can an I give my phone to someone else who can use it with their own chip while I use my new phone with my own contract? How does this work?

    The link was only to give you an idea on options available here. In brief they are:
    Option 1 - wait until eligible for an upgrade.
    Option 2 - purchase the iPhone 3G S on Pay & Go from 19 June.
    Option 3 - pay the remainder of their monthly line rental in one payment and sign a new Pay Monthly contract.
    Makes you sick, done it?
    Joe

  • Hyperion Planning business rules migrating to Calc Manager issue

    It was suggested I post this in calc manager as well, so I hope cross posting is allowed!
    We are trying to migrate from Hyperion Planning 11.1.1.3 to 11.1.2.2
    Our business rules were migrated to Calc Manager by our IT team. The rules run (for the most part).
    Our main complaint about this migration is that it excluded our comments inside the business rules and added it's own!
    When we first open the rule it is in graphical mode. But on the Script Tab I can see our orignal Business rule, but it's missing comments. Not all comments -- those at the top of the rule are intact, but after it starts getting into the meat of the rule, it loses many, but not all of the comments. When I chose to edit this rule in script mode, then calc manager adds tons if its own comments, making the code very junky to read.
    So, multiple questions -- how do we get the migration of business rules to calc manager to stop losing our important comments. Is it possible to get the newly migrated rules to initially open in script mode rather than graphical mode so that it doesn't add it's own comments. Or is there a way to turn off the added commenting?
    This is a snippet of our rule in 11.1.1.3:
    FIX ("D0P000 Pushdown")
    "Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
    ENDFIX
    /* FIX on account members that should be rolled up in the AGG statement below. */
    FIX (@DESCENDANTS( "Orders"),
    This is what it looks like when it comes up in graphical mode in Calc Mgr 11.1.2.2 (note that comment is already missing):
    FIX ("D0P000 Pushdown")
    "Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
    ENDFIX
    FIX (@DESCENDANTS( "Orders"),
    This is what it looks like when it switches from graphical to script (bonus comments are added):
    FIX ( /*DIM:Entities*/"D0P000 Pushdown")
    /*STARTCOMPONENT:FORMULA*/
    "Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
    /*ENDCOMPONENT*/ ENDFIX
    FIX ( /*DIM:Accounts*/@DESCENDANTS( "Orders"),
    Thanks for any help.
    Brenda

    You might learn to appreciate graphical mode in Calc Manager, we do. It is not like the old Business Rules in EAS. I am an old school calc script person, and have NO love for drag-and-drop coding ... I need control. ;-)
    Insert a blank script object and paste your code into the 'Script' tab for that object. Set up your prompts and use the {} notation in your code. All of the comments will stay put ... as long as you DON'T USE EDIT, SCRIPT! We make a fair number of generic, reusable pieces of code and save them as shared scripts. These can be dragged into Rules. Click on the Rule's Begin object and choose the Script tab ... you will see how the bits are assembled into complete calc script. We've even come up with a way to use LOOP ... ENDLOOP as though it were a procedural IF statement so we can control whether or not a chunk of code is active or not.
    Shared scripts are especially good for currency translation components since we occasionally add new currencies and want to make a change in one object that is used in dozens of business rules.
    Mike H.

  • Upgrading plan from basic to smart phone

    I'm currently on a grandfathered family plan with all basic phones with my parents and siblings. I want to upgrade to a smartphone (probably an iphone) and was wondering if I switch to my own plan can I keep the same phone number? And will this mess up my parents' plan if I'm leaving it? Also, I'm not sure how much data I would need. I've looked at the calculator, but I'm just wondering what is an adequate amount for one person? I frequently use Facebook, email, Google, and Pandora. Lastly, if there is wifi at my house, for example, does it still use the allotted data or does it switch to the wifi the way an ipod touch uses wifi without having to pay extra for it? Thank you so much!

    You need to do an assumption of liability (AOL) for your line of service and move it from your parents account to a new Verizon account in your name.  Depending on your credit score, you may or may not have to pay a deposit as much as $400, refundable after one year of on-time payments.  This should not affect your parents plan if they still have 2 or more lines of service.
    I have no idea how much data you need, but I would start with 2GB and keep a close eye on it.  WIFI does not use your Verizon data, of course.

  • Review/Input Requested on Upgrade Plan (from RHv7 to RHv8).

    Hi folks!  Hopefully by my asking this and having others review it, it will help others in their upgrade efforts!
    I'm the only "real" technical writer at my company (full-time/titled) and need some support from the community on my grand(iose?) plans.  We're upgrading our KB's from RH7 to RH8 to allow more "authors" to come on board to support me - their basic responsibility is content editing and updating.
    I'd like some input on this plan and see if I'm missing anything BIG or if there's a "gotcha" I didn't mention.  I didn't see anything else on this particular type of upgrade... I think mainly because I dove into the multi-author environment head first and never looked back.
    Current Environment:  Running a front-line support KB in RH7, 4 authors and myself, RSC 3.1 running source control on a database server as project "X".
    Project size and characteristics:  2300 topics; 480 variable, 120 snippets.  Four SSL's for different audiences.  Output is WebHelp on DFS based servers (replicated to remote sites for business continuity - think "mirror" if on web);
    Usage:  60-100 users daily;
    Generation/Publishing: daily when updates occur.
    End State:  RH8, 6 authors, RSC 3.1 running source control on database server as project "Y" (this is to allow us to parallel the RH7 and RH8 releases and retire the bloated RH7 database (two years of changes).
    Procedure:  (I will perform these steps unless otherwise noted).
    Copy source files onto separate machine with RH8 installed (with 8.0.2 update).
    Lockdown (partial) database (no changes except emergent).
    Open and convert project - denying access to RSC for the project.  (We must still keep RH7 up and running to do emergent updates and backout in case of failure at the end).
    Tweak project files (known design changes, templates/master pages, snippets, variables, etc.).
    Customize SSL's for testing
    Save project as new name and create/rename starting page,
    Test Generate and publish all SSLs.
    Check publishing.  Repeat above until correct.
    Place project into version control.
    Test Check In/check out.
    Update SSLs to PROD servers.
    Update content changes since "partial lockdown".
    Generate/Publish/Check content
    Announce to users (will have new URLs).
    Upgrade existing authors in series.  including:  Deleting old project from hard drive, uninstalling RH7, installing RH8, installing 8.0.2 update, retrieving new project (always a fun time!).
    Upgraded authors test check in/check out.
    Unfreeze content changes - all changes in RH8 - no changes in RH7 version.
    Parallel content for one week.
    Remove RH7 generated WebHelp system from PROD.  Replace landing page with redirect.
    Archive RH7 database and remove from RSC server.
    Bring new authors on individually.
    One additional note.  There is a strong push to add about 3,000 new items to the KB.  I say items because I have not evaluated content and do not know if "items" corresponds to topics.  Could be a 1:1; likely a 1:3 (i.e., 9,000 new items).  These items would probably be limited to only one SSL (group).  Should I put these additional items in a separate project (start afresh) for performance sake?
    Thanks in advance.

    Disregard.  Plan implemented successfully.  For the most part as-is.

  • Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

    Hi All,
    My client is upgrading from SAP R/3 4.6C to ECC 6.0
    We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
    we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
    The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
    Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
    If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
    Thank You,
    Ashok

    My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns.  ELM (External List Management), IDOC are some of the tools.
    You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
    We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system.  It also comes with batch tools to cleanse/dedup the entire systems name/address information.  See Data Quality Management for SAP for further details.

  • LCM: Foundation Calc Manager vs Planning Rules Files

    I need to LCM rules files and see the rules in 2 different places, Foundation -> Calc Manager and Planning -> Rules Files. Which one is the correct file from which to LCM, and what is the difference between them?
    Also, files that were brought in via LCM show under Planning -> Rules Files but NOT under Foundation -> Calc Manager. Why would this be?
    Thanks!
    FA

    For this you need to understand the underlying design. Unlike HBR, which acted as the Rules repository, in Calc Manager, rules need to be deployed to Planning from Calc Manager. Once the rule is deployed to Planning, it (Planning) maintains the copy of the rule in it's repository. You can continue to make changes to your rules in calc manager and it will not have any effect on the rule in Planning.
    So during LCM, you will the rules in 2 places, one in Calc Manager (the version can be different from what is in Planning) and also in Planning.
    So you can import the Planning rules via LCM and it will run without calc manager coming in to picture. But if you want to edit these rules and deploy it back to Planning, you would need to import the rule via lcm in to Calc Manager and redeploy to Planning.
    -Sree Menon

  • I purchased the 9.99 monthly plan from iTunes to convert my resume from .doc to .pdf and it keeps telling me to purchase the upgrade I already bought. I look on my PC and it says I'm still a free customer and need to sign up annually for the pack. Bullshi

    I purchased the 9.99 monthly plan from iTunes to convert my resume from .doc to .pdf and it keeps telling me to purchase the upgrade I already bought. I look on my PC and it says I'm still a free customer and need to sign up annually for the pack. ********! What do I need to do

    If you purchased a subscription from Apple's iTunes store, you'll need to go to them to manage it:
    Manage your auto-renewing subscriptions - Apple Support

  • I just upgraded my data plan from 6GB to 10GB for the same rate of $80 is this a promotion? If yes, when does the promotion end? Thank you.

    I just upgraded my data plan from 6GB to 10GB for the same rate of $80 per month. Is this a promotion? If yes, when does the promotion end?

    In most cases you keep the same plan and promotions even when you upgrade the phone.  There are exceptions for very old plans and unlimited data, but essentially mrhelper is correct. You have option to "keep current plan" when upgrading.  so in most cases, your statement that you will go back to $100 for 10 GB when upgrading is incorrect.  What was your particular circumstance?

  • Adobe shutting out TLP customers from Upgrade Plan

    I am a network administrator for a small company of about 10 million dollars per year.  We have a copy of Adobe CS6, InDesign and 12 licenses of Adobe Acrobat.  For the last 6 or so years we have purchased the Upgrade Plan though the Transactional Licence Program for the Creative Suite and InDesign.  I am mystified why Adobe is now shutting out smaller customers like use from being able to subscribe to the upgrade plan?
    The changes in licensing over the last 6 or so months have been very negative for us.  We feel like we are being forced into buying upgrades instead of being able to be on a predictable upgrade plan.  I hate to say it, but Adobe's licensing is now worse than Microsoft's.  At least MS is willing to offer any company Software Assurance at any level.
    We also use QuarkXpress in additon to InDesign.  I guess I will need to start pushing that we use Quark instead of Adobe. 
    I hate to be bitter, but this really leaves me feeling screwed by Adobe.

    They also stated the "new" features being released on the Cloud would be released to all users in the next full release. However now there is no next release for perpetual license holders other than the cloud going forward. This is blatant misinformation as well, information they no doubt knew but withheld to ensure further sales of CS6 in the meantime. Very shady practices on Adobe's part, many efforts seem to be made to boost sales of CS6 even when they knew what was happening behind the scenes with their decisions that are now detrimental to many customers going forward.

  • Oracle Forms & Report Upgrade/Migrate from 6i to 11g

    Hi All,
    We are planning to upgrade/Migrate from Oracle Froms and Reports 6i to 11g. Can some one please  give me an high level steps to upgrade and migrate from 6i to 11g version.
    Many thanks in advance.
    Kind Regards,
    Mohan

    hi ,
    use below steps for Eliminate this issue
    To start the wizard version of the Forms Migration Assistant:
    1. On Windows systems, set the environment variable FORMS_PATH:
    SET FORMS_PATH=%ORACLE_HOME%\forms
    On UNIX systems, set the variable FORMS_PATH as in the example below:
    setenv FORMS_PATH $ORACLE_HOME/forms
    2.
    In Windows, from the Start menu, select ORACLE_HOME | Forms Developer |Oracle Forms Migration Assistant (GUI Mode), or at the command line, start the conversion utility by entering: frmplsqlconv.bat mode=wizard.
    or
    in UNIX, enter frmplsqlconv.sh mode=wizard.
    The Conversion Wizard Welcome dialog displays.
    Regards,
    Babu

  • Hyperion Planning upgrade issue : Upgrade planning 9.3.1 to 11.1.1.3

    Hi,
    I am getting the below given erro while upgrading hyperion planning from 9.3.1 to 11.1.1.3
    I have done the following steps in sequence to achive the upgrade:
    1. Created a planning application "plantest" on 9.3.1 , created hireachy and "create Database" from planning to make the essbase outile.
    2. took the backup of planning db repository from 9.3.1 using expdp in a dumpfile.
    3. migrated the essbase from 9.3.1 to 11.1.1.3
    4. logged on to 11.1.1.3 AppWizard to create the similar planning application with the same name "plantest".
    5. made a note of HSP_USER 50001 sid on 11.1.1.3
    6. stopped the planning on 11.1.1.3
    7. imported the 9.3.1 dump on 11.1.1.3 using the following command :impdp system/password DIRECTORY=TEST_DIR DUMPFILE=PLANNING_FINAL.DMP TABLE_EXISTS_ACTION=REPLACE
    8. started the planning on 11.1.1.3
    9.When I am trying to login to the planning application on 11.1.1.3 - I am getting the following error:
    - Application plantest is invalid.
    I tried loging agian on the same page, this time it gave me a tab "Migrate" instead of usual "logon" and when I tried loging in, it gave the below error:
    - An error occurred while processing this page. Check the log for details
    Please let me know if i am doing anything wrong? - which log should I go and check?
    Please help, its urgent.
    thanks,
    Ankit

    Yes, on clicking the migrate button i get the error.
    I am now looking into "HyS9Planning-sysout.log" and it has the following major errors:
    java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00904: "UNICODE": invalid identifier
    [INFO] HyperionPlanning] - Hyperion Planning started in 4 seconds.
    Oct 12, 2010 3:02:01 PM org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-8300
    Oct 12, 2010 3:02:01 PM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8302
    Oct 12, 2010 3:02:01 PM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/453 config=null
    Oct 12, 2010 3:02:01 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 9016 ms
    Unable to find JDBC_CATALOG key for application: plantest
    Unable to find JDBC_CATALOG key for application: plantest
    com.hyperion.planning.InvalidApplicationException: The application plantest is invalid.
    please suggest??

  • I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the ch

    I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?

    Verizon Wireless Customer Support wrote:
    AHARDY454,
    We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport
    TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly.

Maybe you are looking for