Urgent: Making of vendor payment report

Hi,
I am making report in which i have to display whether payment is done or not ? In this report i am taking XBLNR field as common field to make relatioship among BKPF so that further among BSAS,BSIS,BSAK,BSIK tables as these tables consist of the data about the status that their payment is done or not?

Hi,
Try in dis way....I think it may work
select <fld1> <fld2>....from BKPF into corresponding fields of table t_bkpf
where <condn>.
if not t_bkpf[] is initial.
select <fld1> <fld2>....from MKPF into corresponding fields of table t_mkpf
for all entries in t_bkpf where xblnr = t_bkpf-xblnr.
try in such a way n see.........
Reward if helpful.
Thanks.

Similar Messages

Vendor Payments Report with WBS Elements

Dear Expert,
I am looking a report for Vendor outgoing payment against WBS Elements.
Is there any Vendor Payments report with WBS Elements in SAP? I have seen FBL1N but WBS Elements field is blank.
Thanks
Samiee.

Hi,
You mentioned WBS Element is blank; so please check in any one sample payment documnet whetehr WBS is maintained and if yes find which field it is populated. For eg; sometimes people populate this information in the text or assignment field. If that is the case then change the layout accordingly in FBL1N.
Regards
Sreekanth

Urgent: Regarding Vendor payment report

Hi,
I making a report in which i have to display the vendor payment is done or not?
Curently i am using the 4 tables of Financial :-
BSAK,BSIS,BSIK AND BSAS which gives the status of vendor whether it is paid or not . 1 thing i observed that data compared wit htew MKPF table among these tables(BSAS,BSIK N BSAK) is not coming right as i am taking common field XBLNR among them all .
One more thing i observed that BLART is getting changed in each table.
for instance,
if the BLART is WE for material document and i am taking XBLNR filed from this table MKPF and den looking XBLNR in BKPF where the entry consist of BLART - RE n WE and finally when i look up in the BSAK table the field consist of RE .
How can i see that it is being paid or not the BLART is keep on changing.
Plzz proivde me guidelines as how to rectify the problem?
Edited by: abaper2008 on May 21, 2008 8:54 AM

Hi
May be the report also included the PO / Invoice details.
BSIK - Vendor open items
BSAK-Vendor cleare items
When the invoice is created one entry creates in BSIK - once it is cleared (either through the payment/credit memo/reverse) that entry along with the cleared entry goes to BSAK.
Above two entries 'll have unique data in the field BSAK-AUGBL - with that link you will get the BLART field link.
As you are telling about the RE document type.....there are different types of document types like - FI Document types & MM Document types. RE is the FI document type
As a linking part to get the PO details using the FI data only available field is BKPF-AWKEY data in that field is used in RSEG-BELNR along with Fiscal year.
This is the brief about the link...let me know if you need further details
VVR

Vendor payment report

Hi gurus,
I have a smalll requirement that , my client want to see the vendors payments list on material wise.
I tried in FBL1N by selecting the cleared items. and also changed the layout by dragging the material field column in the report.
but for the material columns showing blank in the report.....
Is there any other way to see this type of report ( vendor payement list on matrial wise).... kindly suggest
Thanks in advance
Alex

Hi Alex,
Go to the this t.codes.MB5S,ME2L,ME2M.May be you see the vendor payment list on meterial wise.
Cheers
Mastan Reddy

Vendor payments report for a month

Dear all,
is there any built report that would show all the vendor payments in a month with the date it has been debited our account?
I tried with FAGLL03, but the date of the ZP document created by F110 can be different from the date of the ZR docs, that show the value date of the transaction.
I would need this report for tax calculations, but if I filter for ZR doc types, the vendor name won't be populated and I can't VLOOKUP for it as it has different clearing number.
Any ideas?
Thanks a lot!

Hi
You would need to have Bank recon in place on realtime basis. So at the end of day, the bank sends you the statement file. Now you will probably need to build in a custom report which will check that for a payment document, if the entry has been posted in the main Bank GL, which will happen only once the bank statement file is uploaded in SAP.
Thanks & Regards
Sanil Bhandari

Vendor payment report required

Dear Sap guru,
We have a requirement , where in we want to anyalis total payment made for a particular vendor during a particular time, not a
line item wise.
is there any standard report for the same please let me know.
Thanks & Regards,
Varsha

Hi:
Although FBL1N shows you line item wise payment made invoicing done or credit memos e.t.c but still you can use it to know the total amount of payment done against a vendor with the following criteria. I hope you will be familiar with concept of document types. In standard KZ is for payment and KA is for its reversal. Execute FBL1N with all item selection giving a particular date range ..Once you done with execution. Filter the document type with document type KZ and KA ( or whatever document type you use for payment and its reversal). Once these document type gets filtered and apply subtotal and collapse it. This will show you net payment made during a time period.
Regards

Urgent Prob with vendor payment advice

hi friends,
Had an urgent problem...all our vendors are not recieving the payment advices via email. friends help me out investigating the prob and guide me how to set it right.
thanks
regards
charlie
Message was edited by:
charlie2006 charlie

charlie,
look here
Re: F110 - Automatic email to vendor when payment run is carried out
A.

Payment Reference Field KIDNO Not apprearing at the time of Vendor Payment

Hi,
When we are making the Vendor Payment thru F-53, we are not able to see the Payment Reference Field KIDNO there. But when the payment document is posted and we see the line items then this field KIDNO comes there as non-modifiable field. We want to fill some information there in that field for some report purposes. Can you please help me, how can I see this field as changable field at the time of making vendor paymnts thru F-53.
Regards.

Hi Senthilkumar,
Change the field status for the 'payment reference field' to optional or required, based on your requirements. You can do this in T.Code - FBKP.
Do this:
a) Check the field status group maintained in the master data of the Reconciliation account of the vendor.
b) In t.code - FBKP, click on 'Field Status Groups' and enter the variant created for your company code
c) Now from the resultant entries, double click on the field status group which has been maintained in the master data of the Reconciliation account of the vendor.
d) Double click on 'Payment transactions', you would see 'Payment Reference' there which would be having its status as 'Suppressed'. Just change it to Optional or Required!!
Regards,
Angad

Scheme of Entries for vendor payment under EBS system

Hello Friends,
I am setting below the scheme of entries as I think is appropriate for making a vendor payment. The scenario is that we will make a payment to the vendor where the payment will be released through BACS (we are working for a UK based client). After the payment run is made the payment is not actually made for some reasons and are returned. Then we make the payment again and this time the payment run goes through smoothly.
I would request you to please let me know if I am wrong in the scheme of entries and if yes, what would be the proper scheme.
1.
When Invoice is raised (FB60)
GR/IR a/c        Dr        100
VAT a/c          Dr          20
    To Vendor a/c Cr            120
At this point there is one open item that is created in the vendor account.
2.
When payment run is made (F110)
Vendor a/c                          Dr              120
      To Unclear BACS a/c     Cr                     120
At this point the entries in the vendor account are cleared by entry no 1 and 2 and there are no open items.
3.
When Bank returns the payment as unsuccessful and we clear the entry (F-03)
Return BACS a/c             Dr          120
    To Vendor A/c             Cr                     120
At this point there is one open item that is created in the vendor account
4.
When payment is once more made and this time successfully
Vendor a/c                       Dr             120
   To Unclear BACS a/c    Cr                       120
At this point entries 3 and 4 clears the open items in the vendor account and there remains no other open items.
Can someone please confirm if the sequence is correct or is there an additional step involved for resetting of any document after entry 2 when the payment run fails?
Regards,
Suvarghya Dutta

Hello,
When you have done step 2, immediately you will not come to know that your cheque is failed, only when you receive the bank statement.
In that case I would not expect you to post to a different account "Return BACS a/c". I do not see any reason for this account. I would expect you to debit to the same account "Unclear BACS a/c", which has been used in order to make the payment.
If you are using a different account for reversal, then you have to take two accounts for reconciliation purpose.
MIRO
GRIR Account Dr
To Vendor Account
F110
Vendor Account Dr
To Bank Sub-account (In your case Unclear BACS a/c)
FF67 or FF.5
If successfully paid
Bank Sub Account Dr
To Bank Main Account
If returned or unsuccessful (*)
Bank Sub Account Dr
To Vendor Account
If you are posting the entry (*) through bank statement, then no need to use FBRA.
Use FBRA immediately once you run F110 and you know that you have paid the vendor erronously. But once it reached bank and bank has issued bank statement, I would not expect you to run FBRA, but I would like to use FF67 process.
Regards,
Ravi

Vendor payment error

Dear All,
While making the vendor payment .. i m facing the following error...
anyone can help me to solve the issue ??
The entry NELC is missing in table T043G
Message no. F5100
pls help me
regards
kalaivani.J

Hi,
You have to maitain tolerance group for vendors for NELC company code. Do it via IMG - Financial Accounting - Accounts Receivable and Accounts Payable - Business Transactions - Outgoing Payments - Manual Outgoing Payments - Define Tolerances (Vendors)
Regards,
Eli

Vendor Payment - Material Specific.

Dear All,
Is it possible for us to make payment to Vendor specific to Materials Supplied by him.
We have some Vendors, who supply 3 kinds of Materials/Services and has 3 different bank accounts.
For Eg : Vendor XXXX
1 . Service ...... Bank must be BNP Paribas
2. Material (Inflammable).... Bank must be ING
3. Other material ....... Bank Must be Fortis
We have maintained all the bank details in vendor master, but not sure how to make the system to pick the respective Bank while making the vendor payment ( F-58 or F110) on the base of material supplied or service rendered by them.
Have ever come across this kind of requirement. If yes,how did you over come it....if not any work around for this.
Thanks for your time.
Regards,

Hi,
Thanks for your mail.But i want make automation the HOUSE BANK while posting the invoice.
We cant ask the user to check the material sent by the vendor and select the respective bank while posting the document.
We get 1000 of invoice per day and this method cant be applied.
Do you have any other work around....do suggest.
Regards,

Vendor Payment Performance Report

Hi,
I am in the process of developing a report which should show details of Project, Service orders and purchase orders information. If end user inputs project/SO/PO/Vendor in the selection screen of the report, they are expected to see service orders and their related costs information. In the drill down they would like to see related Purchase orders information of the service orders including PO Quantity, PO Value, Invoiced Quanity, Invoice value, Invoice creation date, Invoice posting date, Invoice due date(Invoice date + Vendor Payment terms), Actual payment date to Vendor, Blocked invoices, Reason for blocking, Vendor info. Is there any Business Content reports, cubes, extractors availabe to serve my purpose ? If this requirement can't be developed in one report please suggest what is the best way of doing.
Eg of Report Result data:
Selection screen can have Project, Service Order, PO, Vendor, Year & Month
Report Results:
Project     SO         PlannedCost
WBS1      1001      5000 GBP
(5000 GBP contains 2000 GBP spent on labour cost + 3000 GBP spent on material which will be paid to different vendors)
If we drill down using Purchase Order it should show PO details for 3000 GBP and show blank for 2000 GBP
Project    SO        PO     POValue   InvoiceValue    IVdate   IVPaiddate    IVDuedate    Vendor
WBS1     1001    2000   -
WBS1     1001    P123   1000          1000               1.8.09     16.8.09       15.8.09         CP
WBS1     1001    P234      500           500               15.7.09    15.8.09      15.8.09         BP
With the above info 100% ontime payment made to vendor BP, for CP it is not, Customer is interested to see this level of information.
For 3000 GBP , for all the purchase orders we need to show PO Quantity, PO Value, Invoiced Quanity, Invoice value, Invoice creation date, Invoice posting date, Invoice due date(Invoice date + Payment terms), Actual invoice payment date, Blocked invoices, Reason for blocking, Vendor info details
Waiting for experts suggestions on the above requirement.

Hi,
You can create a report on this, but first have to findout in which all the tables your fields existing. Based on this you can build a report in r/3 or a FM which you can use it in Generic DS.
Hev you gone thru standard Purchase DS which available in r/3 side. Just check them it might suits your requirement.
also check the below docu for more info:
http://help.sap.com/saphelp_470/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Reg
Pra

Single Report Goods Receipt to Vendor Payment ( GR-IV-vendor payment)

Hi Friends,
My client wants to asking the single report for GR to Vendor payment. Please let me know how to get the report?
Regards,
Chandra.

Dear Chandra,
To my knowledge, there is no standard report available for this.
You can use the tables BKPF, BSEG, MKPF and MSEG for creating a report.
Kindly close this thread in this forum and raise the same question in MM and FI. So you might get answers for your query.
Best Regards,
Raj

Report to view vendor payment status

Dear GURUS
Is there any Report to view vendor payment status against purchase order.
Please give me transaction code if any.
SANTOSH KADAM

check report
FBL1N
u will get the report u can creat ur own lay out also to satisfy u r need
hope this helps

Vendor ageing report for down payment bucketwise

Hi
I have paid many downpayment to various vendors. Now i want the ageing report for the same (i.e. bucket wise i.e. 0-30 days, 31-60 days and so on).
This i am getting for vendor invoices in TCode: S_ALR_87012085 (Vendor payment history with OI sorted list).
Please let me know if the bucketwise report is possible for the downpayment too.

Hi,
Vendor ageing for down payments as well as invoice i use to see from T.code FBL1N by creating layouts.
Choose Arreas after net due date from layout and for that column you can apply a rule that from 0 to Lessthan or equal to 30.
Like that you can create the layouts. In FBL1N you can give this layout (down) so information come in that format.
The one disadvantage is that you have to select manually the layouts and you can see only one ageing information at a time.
Regards,
Sankar

Urgent: Making of vendor payment report

Similar Messages

Maybe you are looking for