Urgent - Need Details on Error Code AIP-51505
Hi,
I am getting the following error in B2B.Previously the Process was working without any issues. I have made one change in the ECS and XSD and uploaded the same. ( I have included the SAC Loop present in IT1 Loop as per Customer Requirement). After Uploading the ECS and XSD, I am getting this error.
Element SLN03(Relationship Code) is missing. This element's standard option is 'Mandatory'. Segment SLN is defined in the guideline at position 200.{br}{br}This element was expected in:{br}{tab}Segment Count: 7{br}{tab}Character: 1757
I have checked the Payload and i found SLN03 Element is getting mapped. Please find the payload message.
<?xml version="1.0" ?><Transaction-810 xmlns="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C" XDataVersion="1.0" Version="2002" CreatedBy="BPEL" Standard="X12" CreatedDate="2009-04-28T07:03:41-05:00" GUID="{34323331-3237-3139-3438-323032323137}"><ns0:Segment-ST xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-143>810</ns0:Element-143><ns0:Element-329>#ControlNumber#</ns0:Element-329></ns0:Segment-ST><ns0:Segment-BIG xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-373>20080930</ns0:Element-373><ns0:Element-76>5TE9423530</ns0:Element-76><ns0:Element-324>2069225</ns0:Element-324><ns0:Element-640>DR</ns0:Element-640></ns0:Segment-BIG><ns0:Segment-CUR xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-98>BY</ns0:Element-98><ns0:Element-100>USD</ns0:Element-100></ns0:Segment-CUR><ns0:Loop-N1 xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Segment-N1><ns0:Element-98>RE</ns0:Element-98><ns0:Element-66>92</ns0:Element-66><ns0:Element-67>3950132</ns0:Element-67></ns0:Segment-N1></ns0:Loop-N1><ns0:Loop-IT1 xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Segment-IT1><ns0:Element-350>1</ns0:Element-350><ns0:Element-358>318288</ns0:Element-358><ns0:Element-355>EA</ns0:Element-355><ns0:Element-212>0.006</ns0:Element-212><ns0:Element-235>BP</ns0:Element-235><ns0:Element-234>UPNXXX</ns0:Element-234></ns0:Segment-IT1><ns0:Loop-PID><ns0:Segment-PID><ns0:Element-349>F</ns0:Element-349><ns0:Element-352>Installed Item:-</ns0:Element-352></ns0:Segment-PID></ns0:Loop-PID><ns0:Loop-SLN><ns0:Segment-SLN><ns0:Element-350>1</ns0:Element-350><ns0:Element-350_1>1</ns0:Element-350_1><ns0:Element-662>I</ns0:Element-662><ns0:Element-380>318288</ns0:Element-380><ns0:Composite-C001><ns0:Element-355_1>EA</ns0:Element-355_1></ns0:Composite-C001><ns0:Element-235_1>PD</ns0:Element-235_1><ns0:Element-234_1>Installed Item:-</ns0:Element-234_1></ns0:Segment-SLN></ns0:Loop-SLN></ns0:Loop-IT1><ns0:Segment-TDS xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-610>195843</ns0:Element-610></ns0:Segment-TDS><ns0:Loop-SAC xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Segment-SAC><ns0:Element-248>C</ns0:Element-248><ns0:Element-1300>D240</ns0:Element-1300></ns0:Segment-SAC></ns0:Loop-SAC><ns0:Segment-CTT xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-354>1</ns0:Element-354></ns0:Segment-CTT><ns0:Segment-SE xmlns:ns0="urn:oracle:integration:b2b:7C0A5F9F470C412CB256ABCF33E4E80C"><ns0:Element-96>#SegmentCount#</ns0:Element-96><ns0:Element-329>#ControlNumber#</ns0:Element-329></ns0:Segment-SE></Transaction-810>
Any pointers on this issues would be greatful.
Thanks in Advance,
Saravana
Edited by: user10635261 on Apr 28, 2009 4:31 AM
Hi Anuj,
Thanks for your Responce. The file that i have used for my testing is passed through B2B wihtout any issues before making the changes to ECS and XSD. After making the changes it shows the error. Even i havent modified BPEL Process. Also SAC Loop is Optional in ECS and XSD. I have posted the B2B log below:
no result from XDataToNative
sErrorGuid = {266F5511-2133-45F1-8DB6-79B388F18789}
sDescription = Element SLN03(Relationship Code) is missing. This element's standard option is 'Mandatory'. Segment SLN is defined in the guideline at position 200.{br}{br}This element was expected in:{br}{tab}Segment Count: 7{br}{tab}Character: 1757
sBrDescription = 5016: A mandatory data element is missing.
sParameterName = ErrorLevel sParameterValue = 1
sParameterName = Name sParameterValue = EDIExistence
sParameterName = ecCaseID sParameterValue = 10
sParameterName = ecdn_guid_ sParameterValue = {34323331-3237-3139-3438-323032323137}
sParameterName = ecindex sParameterValue = 0
sParameterName = eclast_known_data_offset sParameterValue = 1757
sParameterName = ecnode_id_ sParameterValue = 652
sParameterName = ecsize_ sParameterValue = 0
sParameterName = ecstart_pos_ sParameterValue = 1757
sParameterName = ec_DataPath sParameterValue = <ns0:Segment-SLN><ns0:Element-350>1</ns0:Element-350><ns0:Element-350_1>1</ns0:Element-350_1><ns0:Element-662>I</ns0:Element-662><ns0:Element-380>318288</ns0:Element-380><ns0:Composite-C001><ns0:Element-355_1>EA</ns0:Element-355_1></ns0:Composite-C001><ns0:Element-235_1>PD</ns0:Element-235_1><ns0:Element-234_1>Installed Item:-</ns0:Element-234_1></ns0:Segment-SLN>
sParameterName = ec_ElementCount sParameterValue = 3
sParameterName = ec_PrevDataPath sParameterValue = <ns0:Segment-SLN><ns0:Element-350>1</ns0:Element-350><ns0:Element-350_1>1</ns0:Element-350_1><ns0:Element-662>I</ns0:Element-662><ns0:Element-380>318288</ns0:Element-380><ns0:Composite-C001><ns0:Element-355_1>EA</ns0:Element-355_1></ns0:Composite-C001><ns0:Element-235_1>PD</ns0:Element-235_1><ns0:Element-234_1>Installed Item:-</ns0:Element-234_1></ns0:Segment-SLN>
sParameterName = ec_SegmentCount sParameterValue = 7
sParameterName = ec_SubElementCount sParameterValue = 0
sParameterName = ec_error_scope sParameterValue = Transaction
Similar Messages
-
EDI Outbound 855 Error Code:AIP-51505 Unable to create outbound file
Hi,
I am facing some issues while processing EDI Outbound 855.
I am getting error in B2B . I have checked ECS and XSD. There is no mismatch
Error description: Extra elements were found in the data file as part of Segment PO1 at guideline position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 3{br}{tab}Element Position: 5{br}{tab}Characters: 1388 through 1390
Can any one give me some resolution for this one.
Regards,
RaoHello Rao,
It appears from your previous post,
1. This issue is there only for one Trading Partner.
2. You have already validated document against XSD and also XSD is generated from the ecs which is getting used, transaction set ecs does not contain envelop details.
Please do the following.
1. Please make sure you have not overridden transaction set ecs as part of operational Capability.
2. Please send us the b2b.log in DEBUG mode along with ecs and payload(XML) which will help us to identify which segment is extra in it.
Rgds, Ramesh -
Hi,
I have a problem with one DPM 2012 SP1 installed on Windows 2012 R2 server with SQL installed locally on the server.
We have installed this server for about 1 month ago and almost every job work grate until now.
The May 17 there were a DPM Rollup 6 (KB2958098 – version 4.1.3441.0) that was trying to install but it failed. But it looks like it has installed anyway because in DPM it say 4.1.3441.0.
Now DPM is reporting a lots of critical and warnings.
We backup Windows 2003, Windows 2008 and Windows 2012 servers and cannot us DPM 2012 R2.
I have upgraded agents on protected servers but it didn’t help.
I have restarted DPM server
This error message is in DPM. It does not matter if it is Replica is inconsistent or Replica point creation failed.
DPM failed to communicate with the protection agent on DPM SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
The protection agent on DPM SERVER was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
In Event Viewer-Application on DPM server I see this error.
Log Name: Application
Source: Application Error
Event ID: 1000
Faulting application name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Faulting module name: DPMRA.exe, version: 4.1.3441.0, time stamp: 0x53406006
Exception code: 0xc0000005
Fault offset: 0x000000000025d8ed
Faulting process id: 0x1124
Faulting application start time: 0x01cf74d746ed59eb
Faulting application path: C:\Program Files\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft System Center 2012\DPM\DPM\bin\DPMRA.exe
Report Id: 987b50f5-e0ca-11e3-80c7-00155d64d613
Faulting package full name:
Faulting package-relative application ID:
Firewall on all protected servers and DPM server are disabled. Communication with agent works at should be.
Please let me know if you need any additional information.It looks like something is causing DPMRA service to crash on your DPM server.
My suggestion for you would be to move to DPM 2012 R2 since it now supports backups of Windows Server 2003 with UR2.
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights. -
I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O. I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name: Application
Source: MSDPM
Date: 6/13/2011 1:09:12 AM
Event ID: 4223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSDPM" />
<EventID Qualifiers="0">4223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
<EventRecordID>68785</EventRecordID>
<Channel>Application</Channel>
<Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
<Security />
</System>
<EventData>
<Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
<Binary>3C00440070006D005700720069007400650072004500760065006E0074003E003C005F005F00530079007300740065006D003E003C00490044003E00330030003C002F00490044003E003C005300650071003E0031003800330033003C002F005300650071003E003C00540069006D00650043007200650061007400650064003E0036002F00310033002F003200300031003100200035003A00300039003A0031003200200041004D003C002F00540069006D00650043007200650061007400650064003E003C0053006F0075007200630065003E0066003A005C00640070006D00760033005F00720074006D005C0070007200690076006100740065005C00700072006F0064007500630074005C0074006100700065006200610063006B00750070005C006400700073007700720069007400650072005C00760073007300660075006E006300740069006F006E0061006C006900740079002E006300700070003C002F0053006F0075007200630065003E003C004C0069006E0065003E003800310035003C002F004C0069006E0065003E003C004800610073004500720072006F0072003E0054007200750065003C002F004800610073004500720072006F0072003E003C002F005F005F00530079007300740065006D003E003C00440065007400610069006C006500640043006F00640065003E002D0032003100340037003200310032003300300030003C002F00440065007400610069006C006500640043006F00640065003E003C002F00440070006D005700720069007400650072004500760065006E0074003E00</Binary>
</EventData>
</Event>
Any help would be greatly appreciated!Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress. -
I am having problems backing up data with DPM 2012. I keep getting this meesage. The protection agent on dpmServer was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
I can't understand what my error logs are trying to tell me please help.
NORMAL Begin new execution batch at task:(True)-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 28E0
10/07 22:47:42.979
16 ActiveJob.cs(851)
NORMAL Dispatching task for execution:True-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.979
16 ActiveJob.cs(581)
NORMAL Begin ExecuteTask:JobID=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, ItemID=a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.990
27 DatasourceServerTypeLock.cs(395)
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:42.991
01 DPMTaskController.cs(70)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL (job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, taskId=a2c49c70-696b-423d-8aaf-7898c1feb403) DPMTaskControllerHelper : ExecuteTask - CheckTaskStatus returned ReadyToExecute
042C 2AAC
10/07 22:47:42.993
01 TaskExecutor.cs(692)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting up Fsm: verb[3d859d8c-d0bb-4142-8696-c0d215203e0d]
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.021
01 TaskExecutor.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL ExecuteTask(job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d) - Starting task instance
042C 092C
10/07 22:47:43.023
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(406): TaskStart, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 092C
10/07 22:47:43.115
01 TaskInstance.cs(442)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Task: Initial transition enqueued, startState='Backup.StartState'
042C 1A54
10/07 22:47:43.116
27 BackupMachine.cs(1919)
A2C49C70-696B-423D-8AAF-7898C1FEB403
ACTIVITY BackupMachine : Starting machine execution
042C 2FC8
10/07 22:47:43.135
27 FindPrincipalServerBlock.cs(245)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Found Principal server for DatasourceId = a87a4dea-2e19-4456-ae3b-e5ce01c10351 Server= fs.org
042C 2AAC
10/07 22:47:43.146
27 DatasourceServerTypeLock.cs(395)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:43.147
27 OperationTypeLock.cs(582)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In LockServer() of ReplicationOperationTypeLock, returning lockStatus = AcquiredLock
042C 2AAC
10/07 22:47:43.156
27 OperationTypeLock.cs(628)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL UnlockServer() of ReplicationOperationTypeLock, returning
042C 2AAC
10/07 22:47:43.159
27 OperationTypeLock.cs(224)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting detailed error for operation lock failure to = PrmReplicaAgentDirtyShutdownDetected
042C 2AAC
10/07 22:47:43.160
27 OperationTypeLock.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In Lock() of ReplicationOperationTypeLock, returning lockStatus = DoNotWaitToAcquireLock
042C 2AAC
10/07 22:47:43.162
27 CheckConcurrencyBlock.cs(151)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Check concurrency block - Failure (abortedOnConflictingServerOperation=True)
042C 1F90
10/07 22:47:43.165
27 FsmBlock.cs(130)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Backup.CheckConcurrency.PT : <-- Exited FSM block with FAILURE (errorCode = ReplicaInvalidWithReason)
042C 1F90
10/07 22:47:43.419
27 BackupMachine.cs(2156)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING BackupMachine : FAILURE - BACKUP, errorCode=ReplicaInvalidWithReason
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Task Diagnostic Information - <?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TaskExecutionContext>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmWriterId>00000000-0000-0000-0000-000000000000</PrmWriterId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasourceId>a87a4dea-2e19-4456-ae3b-e5ce01c10351</PrmDatasourceId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmActiveNodeName>skafs.srvs.org</PrmActiveNodeName>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmLogicalReplicaId>342784c2-f783-487d-be78-154a5a17193f</PrmLogicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasetId>0cbb5339-0af5-4e70-9882-ed118a191890</PrmDatasetId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmPhysicalReplicaId>f440f18e-9436-4fed-9e7c-96cc1a9ebec1</PrmPhysicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaValidity>Invalid</PrmReplicaValidity>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaStatus>Idle</PrmReplicaStatus>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmOwnerLockId>00000000-0000-0000-0000-000000000000</PrmOwnerLockId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEVerb>DeltaReplicate</TEVerb>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorState>Backup.CheckConcurrencyPending</TEErrorState>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorDetails><?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:ErrorInfo ErrorCode="1073774947" DetailedCode="0" DetailedSource="0" ExceptionDetails="" xmlns:q1="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd">
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourceid" Value="a87a4dea-2e19-4456-ae3b-e5ce01c10351" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="dpmerrorcode" Value="30187" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="protectedgroup" Value="fs" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourcename" Value="P:\" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="servername" Value="fs.org" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="replicaid" Value="342784c2-f783-487d-be78-154a5a17193f" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </q1:ErrorInfo></TEErrorDetails>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </TaskExecutionContext>
042C 1F90
10/07 22:47:43.423
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(823): TaskStop, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 1F90
10/07 22:47:43.446
01 TaskExecutor.cs(843)
A2C49C70-696B-423D-8AAF-7898C1FEB403
FATAL Task stopped (state=Failed, error=ReplicaInvalidWithReason; 0; None), search "Task Diagnostic Information" for details.
042C 1F90
10/07 22:47:43.457
16 ActiveJob.cs(745)
WARNING Fail: Task 'a2c49c70-696b-423d-8aaf-7898c1feb403' failed with error during execution.
042C 1F90
10/07 22:47:43.457
16 Task.cs(235)
NORMAL Changing task state from 'GenerateWorkplan' -> 'Failed' (a2c49c70-696b-423d-8aaf-7898c1feb403)Same problem on our two file-server: "The protection agent on was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)"
Problem started about 04 October 2013.
DPM Server and agents: 4.1.3417
There is event in fileservers application log:
Log Name: Application
Source: Application Error
Date: 09.10.2013 17:15:17
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: host1.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0xe7c
Faulting application start time: 0x01cec4d870046a62
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b1b1f6ed-30cb-11e3-acc1-00155d079701
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-09T10:15:17.000000000Z" />
<EventRecordID>109798</EventRecordID>
<Channel>Application</Channel>
<Computer>host1.ourlocaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>DPMRA.exe</Data>
<Data>4.1.3417.0</Data>
<Data>52011087</Data>
<Data>FileWriterHelperPlugin.DLL</Data>
<Data>4.1.3313.0</Data>
<Data>50ad994d</Data>
<Data>c0000005</Data>
<Data>000000000002ba9f</Data>
<Data>e7c</Data>
<Data>01cec4d870046a62</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
<Data>b1b1f6ed-30cb-11e3-acc1-00155d079701</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 09.10.2013 17:15:22
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: host2.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0x71c
Faulting application start time: 0x01cec4d870669e98
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b4680c67-30cb-11e3-ba10-001dd8b71c0e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-09T10:15:22.000000000Z" />
<EventRecordID>54725</EventRecordID>
<Channel>Application</Channel>
<Computer>host2.ourlocaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>DPMRA.exe</Data>
<Data>4.1.3417.0</Data>
<Data>52011087</Data>
<Data>FileWriterHelperPlugin.DLL</Data>
<Data>4.1.3313.0</Data>
<Data>50ad994d</Data>
<Data>c0000005</Data>
<Data>000000000002ba9f</Data>
<Data>71c</Data>
<Data>01cec4d870669e98</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
<Data>b4680c67-30cb-11e3-ba10-001dd8b71c0e</Data>
</EventData>
</Event> -
Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
AndrasHi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
RobHello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl -
Do you need help with error code 1004
The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore processSee the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html -
hello,
I have a table with 7 columns, 6 columns are of datatype of VARCHAR2/DATE/NUMBER, one column is of datatype SYS.XMLTYPE.
I am trying to insert one record into the table. The insert script is as below:
INSERT INTO t1
VALUES (234556789,1045,0,SYSDATE,SYSDATE,'SYSTEM',XMLTYPE('<GSL>300</GSL>'));
There are no garbage characters in the above insert statement.
When I run this script on UNIX I get the error below:
ERROR at line 1:
ORA-00600: internal error code, arguments: [17177], [0x000000000], [], [], [],
ORA-31011: XML parsing failed
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
I verified the ora 31011 which says
31011, 00000, "XML parsing failed"
// *Cause: XML parser returned an error while trying to parse the document.
// *Action: Check if the document to be parsed is valid.
But the xml document is a valid document. The same insert script works on an NT machine without any errors.
The version of oracle on unix is 9.2.0.3.0.
The characterset is UTF8
I fired the query below to verify:
SQL> select substr(dbms_java.longname(object_name),1,35) as class, status
from all_o 2 bjects
where obj 3 ect_type = 'JAVA CLASS'
and obje 4 ct_name = dbms_java.shortname('oracle/xml/parser/v2/DOMParser');
CLASS
STATUS
oracle/xml/parser/v2/DOMParser
VALID
Is there any setting (enviroment or any other setting ) needed on UNIX to be able to successfully insert this record in the table. What are the steps I need to do to insert this record
The problems seems to be in XML insert. Can anyone help pls ASAP.
thanks
aananthHi,
the bitmap parameter disables the use of bitmap plans for tables w. only B-tree indexes. This will cause a performance problem in a DWH. So I would prefer to change the optimzer mode. The optimizer than uses a mix of costs and heuristics to find a best plan for fast delivery of the first few rows. This will not produce so much problems.
Regards,
Detlef -
Need help with error code 150:30
need help with finding out what error code 150:30 is and how to fix it
See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html -
hello i am getting error code 400 at login can someone help me please
Yes, because it's gone, as I said in my first post. Any photos you had there moved to Revel. Just sign out in PSE and ignore that from now on.
There's more info about Revel here:
http://forums.adobe.com/community/ps.com_sharing_and_storage
PSE 10 knows nothing about revel. Your photos are there but you can't get to it directly from PSE. You will need to use a web browser instead. -
***NEED HELP. ERROR CODE -1450***
iTunes wont save any of the songs i import!!! i have made a back up disk of the music library and when i restore all the songs a screen pops up with n error code-1450. what can i do to fix the problem???? i alreary downloaded the new version of iTunes and still no results!
Windows 2000Tarasik,
The most helpful information in those posts is staring you in the face in the very first link: it's quite possible—even probable—that you are running the wrong version of AHT (Apple Hardware Test).
Are you 100% certain you're using the version of AHT that came with your particular machine? AHT is highly machine-specific and you cannot use a version that came with the install media for another Mac.
I also suspect that another, very important clue is contained in the last version of BDAqua's first post. -
Need help with Error code (-1202) in itunes store
ITunes Store keeps giving me error code 1202 when I try to click links. I'm using itunes 11 also itunes music page shows blank white screen. And the iTunes Match section doesn't show any pictures and looks like a website when it's on HTML format. The radio stream works and itunes is able to display the music I had stored on iCloud so I'm not sure if its connection issue or what. Does anyone have a fix for this?
See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html -
I need help with error code 32812:
Hi. I am trying to read in some voltages using FP-AI-112. A while ago, I developed a Labview program to do that, and it worked fine. Now, I'm going back and using it again, and I keep getting the error code 32812: "the specified tag name is not found." I have checked and rechecked my tag name in Fieldpoint Explorer over and over again, and I swear that the tag name in my program is identical to the one in Fieldpoint Explorer. Please help. Thanks.
Which version of FP Explorer are you using? Did check the configuration of the IAK file itself?
You can read the following to get more information:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Hope that this helps. Good luck!
Chin Pei -
Error Code: AIP: 50080: Exchange protocol identification error
Hi,
I have setup a business action to process EDI X12 850 (PO) document version 4010 over EDI X12 over Internet - HTTP. To simulate the Trading Partner sending the EDI data to us I have developed a test.html page to submit the EDI data. The test.html does a http post to the b2b/transportServlet. When I do this I get the following error:
AIP: 50080 Exchange protocol identification errorMy Business Action
setup look like this:
BUSINESS ACTION:
Create Business Action : Review for 850
Business Protocol : EDI X12 over Internet
Process Protocol : B2B
Process Protocol Revision : B2B Process - 1.0
General
Name :Process_850
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :850
Document Definition :850_Def
Create Business Action : Review
Business Protocol :EDI X12 over Internet
Process Protocol :B2B
Process Protocol Revision :B2B Process - 1.0
General
Name :Process_997
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :997
Document Definition :997_Def
Create Trading Partner : Review
General
Name :ACME
Operational Capability
Business Protocol :EDI X12 over Internet
Business Action :Process_850
Use Default Document Protocol Parameters :false
Use Default Document Definition :true
Communication Capability
Delivery Channel :ACME_X12_DC
Document Exchange :ACME_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :ACME_X12_Transport
Transport Protocol :HTTP
Transport Server :ACME_X12_Transport_Server
Trading Partner :ACME
Business Protocol :EDI X12 over Internet
Details
Business Action :Process_997 - Responder
Is Initiator :false
Functional acknowledgement required? :false
Is acknowledgement handled by Integration B2B? :true
Document Information
Document Protocol :EDI_X12
Document Protocol Revision :X12_4010
Document Type :997
Document Definition
Document Protocol Parameters
Name Value
Interchange Time #SystemTime(HHMM)#
Interchange ecs File
Security Information Qualifier 00
Security Information
Authorization Information
[ Application Receiver's Code ] ACME
Interchange Control Standard/Repetition Separator U
Segment Delimiter 0x27
Interchange Date #SystemDate(YYMMDD)#
Authorization Information Qualifier 00
[ Application Sender's Code ] ACME
ImplementationClass oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin
[ Interchange Sender ID Qualifier ] ZZ
Replacement Character 0x7c
Subelement Delimiter 0x2b
Interchange Control Version Number 00200
[ Interchange Sender ID ] ACME
[ Interchange Receiver ID Qualifier ] ZZ
Tag Delimiter 0x3d
Usage Indicator P
[ Interchange Receiver ID ] ACME
Version/Release/Industry Identifier Code
Component Element Separator 0x2b
Decimal Separator 0x2e
Functional Group Time #SystemTime(HHMM)#
Responsible Agency Code X
Functional Group Date #SystemDate(CCYYMMDD)#
Group ecs File
Element Delimiter 0x7e
Create Trading Partner : Review
General
Trading Partner :GLOBALCHIPS
Communication Capability
Delivery Channel :GLOBALCHIPS_X12_DOC
Document Exchange :GLOBALCHIPS_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :GLOBALCHIPS_X12_Transport
Transport Protocol :HTTP
Transport Server :GLOBALCHIPS_X12_Transport_Server
Confirmation
Trading partner participant successfully added.
Agreement Details: X12_Agreement
Details
Agreement Id X12_1001
Description
Effective From Date
Effective To Date
Invocation Limit
Concurrent Conversations
Trading Partner Participants
ACME - Process_850 - Initiator
GLOBALCHIPS - Process_850 - Responder
GLOBALCHIPS - Process_997 - Initiator
ACME - Process_997 - Responder
If I tried to use enq_850 I am getting the following error:
AIP-50547 : Trading partner agreement not found for the given input values: From party[NAME] "GLOBALCHIPS", To party[NAME] "GLOBALCHIPS", Business action name "Process_850"; also verify agreement effectiveToDateHi Ramesh,
I have created Internal Deliver Channel as File Inbound for the Host Trading Partner and at the time of creating the agreement between the partners I have selected this channel.
And I am keeping the EDI document in the end point folder. I am giving the file name as XXX_850_4010_1_12345.dat.
Now I am not getting General validation error. This time I am getting the below error.
Please Let me know If my approch is correct?
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{BACD5C1A-90BE-4D6D-8F48-97E66EE909B6}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Friday, January 12, 2007</ExecutionDate> <ExecutionTime>02:26:40 PM (India Standard Time)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>2</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">2</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath>D:\OraASRel2\ip</FilePath> <FileName/> <LastModified/> <FileSize/> <DataURL>file:\\D:\OraASRel2\ip</DataURL> </DataFile> <Interchange Guid="{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="1" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>951</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">ZZ</Link> <Link Name="InterchangeSenderID">BLUECHIPS </Link> <Link Name="InterchangeReceiverQual">12</Link> <Link Name="InterchangeReceiverID">colourchips </Link> <Link Name="InterchangeControlVersion">00300</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">ZZ</Property> <Property Name="InterchangeSenderID">BLUECHIPS </Property> <Property Name="InterchangeReceiverQual">12</Property> <Property Name="InterchangeReceiverID">colourchips </Property> <Property Name="InterchangeDate">061207</Property> <Property Name="InterchangeTime">1601</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00300</Property> <Property Name="InterchangeControlNumber">000050524</Property> <Property Name="InterchangeAckRequested">1</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x2a</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x7e</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0x2b0xd0xa</Property> <Property Name="SubelementDelimiter">0x2a</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{BF922FB1-9661-462C-B5A6-D868869A8C79}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>108</StartPos> <Size>843</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="GroupSenderID">BLUECHIPS</Link> <Link Name="GroupReceiverID">colourchips</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">PO</Property> <Property Name="GroupSenderID">BLUECHIPS</Property> <Property Name="GroupReceiverID">colourchips</Property> <Property Name="GroupDate">20061207</Property> <Property Name="GroupTime">1601</Property> <Property Name="GroupControlNumber">150524</Property> <Property Name="GroupAgencyCode">X</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">150524</Property> </Properties> </NodeInfo> <Transaction Guid="{367C24CC-9747-4E49-9F02-AFC4295CF850}" TransactionAckCode="R" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>171</StartPos> <Size>766</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="TransactionID">850</Link> </Links> <Properties> <Property Name="TransactionID">850</Property> <Property Name="TransactionControlNumber">158192</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">26</Property> <Property Name="TransactionTrailerControlNumber">158192</Property> </Properties> </NodeInfo> </Transaction> </FunctionalGroup> <InterchangeErrors> <Error ErrorCode="{03942C04-7909-4DFB-8F7D-6E5B3D8BDF48}" Severity="Normal" Category="Rejecting" Index="1" ID="50000200"> <ErrorBrief>5000: Parser error - Missing trailer.</ErrorBrief> <ErrorMsg>The Interchange Trailer is missing. The segment itself may be missing or the Segment Delimiter may be missing.{br}{br}Trailer was expected after:{br}{tab}Character: 952 </ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_CaseID">02</Parameter> <Parameter Name="_ec_dn_guid_">{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}</Parameter> <Parameter Name="_ec_start_pos_">952</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>952</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </InterchangeErrors> </Interchange> <AnalyzerErrors> <Error ErrorCode="{9EE55FDF-8668-4499-9F2E-D9247519A850}" Severity="Normal" Category="Rejecting" Index="2" ID="50420000"> <ErrorBrief>5042: Parser error - No matching parser schema was found.</ErrorBrief> <ErrorMsg>The data starting at position 951 is not a valid EDI interchange. The remainder of the data file was ignored.</ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">0</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_start_pos_">951</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <ErrData/> <Part3/> <DataXPointer> <StartPos>951</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </AnalyzerErrors></AnalyzerResults>
2007.01.12 at 14:26:40:779: Thread-12: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1263)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1845)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1777)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1735)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:455)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:327)
at java.lang.Thread.run(Thread.java:534)
Thanks
Raghu
Maybe you are looking for
-
I wrote about this subject and a kind person gave a list with steps to back up using external drive no time machine because it will be inside mac I suppose and taking space. How to choose only ceratin data, e.g. iPhotos etc ? I cannot trace that mess
-
Re: How can I know what my skype number is?
Hey bringiton did you get an answer? I just recently bought skype credit and would like to find out what my number is..
-
I suddenly am unable to edit previously created notes on both my iphone and my ipad. I noticed it just after I joined iCloud but don't know if that may be a coincidence. I am still able to produce new notes; just can't edit older ones. Any idea's?
-
I have adobe photoshop slbum starter edition 3.0. Can i use it to put text on my pictures?
-
HI My ipod classic was told it is not formatted to play the new seasons of Warehouse 13 season 4 and Alpha's season 2..purchaesed frpm itunes???