Urgent ! Purchase Requisition not created in Backend Classic Scenario

Hello All,
I am implementing the classic scenario SRM 5.5. We have replicated the material form the backend to SRM system. Also we have made the necessary config such as maintain backend system, Define Backend System for Product Category, Define Number Ranges for Shopping Carts and Follow-on Document, Define Number Ranges per Backend System for Follow-on Document. Now the problem i am facing is that in the dev system SC with line item with desc and the product (material replicated from backend) as line items are created and their PR is created in the backend. However the same is not happening in the QA system. Only those SC with line item as Desc/text only are created in the backend and those having have product id dont transfer to create PR in the backend. There is no message in the RZ20, SM13, ST22, SM21 etc. Alsowhen i try to tranfer it using the FM BBP_PD_SC_TRANSFER it is created successfully and there is entry in BBP_DOCUMENT_TAB which is cleared afetr clean_reqreq_up is run. I am not sure whats is going wrong. Please help me out guys.
Thanks
Karthik

Hi Andy,
Thanks for the quick responses. I dont see any PR doc no and neither the BUS object type in BBP_PD item details. Please see the o/p below
BE_LOG_SYSTEM                R3QAS400
BE_OBJ_ITEM
BE_OBJECT_TYPE
BE_OBJECT_ID
BE_REFOBJ_TYPE
BE_REFOBJ
BE_REFOBJ_ITEM
BE_REFOBJ_SBITM
BE_REFOBJ_TYPE2
BE_REFOBJ2
BE_REFOBJ_ITEM2
BE_REFOBJ_FYEAR2             0000
BE_STGE_LOC
BE_PLANT                     IE01
BE_BATCH
BE_VAL_TYPE
BE_MOVE_REAS                 0000
BE_EXPERYDATE                000000
BE_PUR_GROUP                 440
BE_PUR_ORG                   IE01
BE_CO_CODE                   IE01
BE_DOC_TYPE                  EC
BE_ACCREQUIRED
BE_SP_STK_IND
BE_INFO_REC
BE_MOVE_TYPE                 101, so i am not sure what could be going wrong.
Is there any way i can debug it and find out what the cause is,
though the calls to the bapis are asynchronous. Also just for the reference sake my backend is 46C. I have been grazing through the notes but haven't found a substantial one.

Similar Messages

Sub contracting Purchase requisition not created thru Service Order

Hi Experts,
I configured to create Service order automatically from Customner service.
Now we have the SM03 repair service order .When we try to create Sub contracting Purchase requisition.
(Selecting Subcontr tick in External tab of Components tab)system gives error saying --
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'
Message no. AD_SUBCON109
I checked the notes and It was not help ful.I understand I was doing something wrong in creation.
The control key used is SM03. Can any body help me in the above problem.
Regards
Rammohan.

Dear Sen,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

Purchase Requisition not creating

Finished good item is MRP Type PD with EX lot size
Component items MRP Type VB (manual reorder point) with FX lot size, re-order point quantity set, and safety stock quantity set.
Since upgrade from 4.6c to ECC 6.0, we are finding that ROP items that are components are not creating Purchase Requisitions with the MRP run.
My component item has 93,000 units in inventory. Safety stock is at 60,000 units and my re-order point is 90,000 units. All within Replenishment lead time, I have a CusOrd requirement for 16000 units (which takes the level below my re-order point) and I have an OrdRes (make-for-stock production) requirement for 20000 units which then takes me below my safety stock level. We have found that MRP is not creating the Purchase Requisition so now we are desperately low on inventory for future requirements.
Has anyone else experience this problem in ECC 6.0?
Gina

i know its something foolish.
but can u run the MD01 , give that plant where the material is maitained.
oh! now first of all, when ur stock falls below ROP, check r u getting any entry in the Planning file entry for that material.
if the entry is not there then there is some issue with ur mrp type
or regenrate the planning file entry again once.
if entry is there , then after MRP run u should get that planned order.
Let me know.
Regards
Pravin Mukkawar
TCS-SAP PP APO

Purchase requisition not to be created if sales order is incomplete.

Hi ALL,
I have a requirement from the business wherin they want purchase requisition not to be created for the incomplete sales order
in case of third party / invidiual P.O sales orders.
We have defined some fields in the item category incompletion status and if this fields are empty then the P req shld not generate.
Can anybody guide me what settings to be made to acheive this.
Please help me in this.

In t.code OVA2, try to assign an incompletion procedure at schedule line level. This procedure can be assigned with relevant status like checking goods movement, and general checked. Then test the scenario.
There is an OSS note out there, but it is NOT exactly represents your scenario. However you can have a look at it.
Note 623267 - Purchase requisition in spite of missing configuration II
Regards,

PR is not creating in Backend ECC for Direct material Shopping carts

Hello Experts,
i have one issue, due to some reasons we deactivated 'Order as Direct Material' button on our SRM shoppingcart screen. But again due to the requirement we activated the 'Order as Direct Material' button. Now the issue is when we are creating a shopping cart by using order as direct material button no Purchase Requisition is creating in the backend ECC. we are in SRM 5.0. we already implemented BADI: BBP_CREATE_BE_RQ_NEW. we are able to create PR for the shopping carts which we order normally i.e for non-direct materials (with out using that order as direct material button).
please guide me on this!!!
thanks in advance!!!!
regards
CD Reddy

Hello,
You can use note 1173815 to debug if follow-on document determination is occurring in backend.
Also, you will be able to check if any error happened during this process.
Kind regards
Ricardo

"Material purchase requisition" not allowed (Use Status PROV, object TM0000

Hello Gurus,
I am getting the following message every time I enter a material in the sales order. The material entered requires a Purchase Requisition (PR) to be created when it is entered in the order. We have done Configuration thru Order Status Profile that will prevent PR creation at time of Order creation.
The message is as follows:
"Material purchase requisition" not allowed (Use
Status PROV, object TM0000000001VB)
Solution requested: We do not want to see this message appearing so many times. Can you pl let me know if there is a way to avoid this.
Thank you
Vasavi

Hi Vasavi,
I am not talking about the po check above that one tab like check purchse order no in this feild keep emty and also below that enter po number also keep un check
and also please check when you creating sales order beside po date one tab is availble check any data in default that
that tab name is display doc header details in that tab purchase order tab in that any infirmation is default check that also
Hope this will helps you
Prem

Purchase requisitions which created during Sales Order missing in MD04

Hi Guys,
I have an issue with MD04.
Purchase requisitions which created during Sales Order missing in MD04 are not appearing in MD04, but these are showing in ME5A. After MRP Run only PRu2019s are showing in MD04.
Requirement type used 511 during creation of Sales Order.
Please advise me if any config/ Master data is missing OR If required any enhancement.
Regards,
Purna

Did you checked for the Firming indicator in PR's?

Purchase requisition not generated

Hi Gurus,
Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
Thanks in advance...

Hi,
As per my understanding, you are running Third Party Process, if yes then, please maintain the following setting for the same;
Mater Data Settings:
1. Item Category Group as BANS in sales org 2 in MM02
2. in MRP2, in procurement type should be 'F'
SPRO Settings:
1. Item Category TAS: Maintain Billing relevance as 'F'
2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
3.ASSIGNMENT: assign Schedule line CS to item cat TAS in VOV5 and TAS to order type in VOV4
4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
Now run the process..I hope this will help you...
Regards,
Bharat B

Purchase requisition not subject to a release strategy

Hi All,
When I will release PR, appears Error: "Purchase requisition not subject to a release strategy". I've check the configuration, but it was appropriate. Can anyone help me to find the solution?
Regards,
MamaRara

hi
In our case also we have faced this problem
Usually when you are executing ME54N the system displays the latest viewed / modified PR.
Hope in your case the latest PR viewd / modified is not subjected to release. Hence it is showing the message
Go to ME22N open your PR - Press save button. Then try to open the same in ME54N.
Hope this will help you
SAS

How is PR created in Extended Classic Scenario

Hai friends
How is PR created in Extended classic Scenario
Please let me know
Regards
Krishna

Hi krishna,
Shopping cart in SRM is equal to PR in R/3.If it is Classic scenario we can customise to create PR in backend for the shopping cart in EBP , but in ECS directly PO will be created against the shopping cart in EBP and it will replicate to R/3 system.
Regards,
Baparao.

Creating Purchase requisition not purchase order

I'm running
SRM Server 5.5 I am in a classic scenario.
For the material group I have defined External procurement, and purchase order in case of complete data.
I have completed price, quantity and vendor (FCT 19) but the shopping cart is trying to make a purchase requisition.
I'd like to create a purchase order directly.
what else I can see?
thanks

Hi Jorge,
You have to define in customizing in Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders)
for the particular Product Category the following document should always be Purchase Order.
In case if the data is incomplete in the Shopping cart the system will create a Purchase Requisition.
so try to see while creating your shopping cart where the supplier field is filled with supplier name or ID.
If not maintain info record for the respective supplier or maintain supplier for the material in the backend or Supplier lists (or)
Activate Badi for replacing the proposed supplier to Default Supplier.
with regards,
mahesh

Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1. Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system. The requisition number will still be provided even if it fails to transfer to the backend.
2. Run FM BBP_PD_SC_RESUBMIT. The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

PO not created in backend after SC creation

Hi Gurus,
We are using classic scenario. Once the SC is approved in EBP it should create PO in backend. But it is not happening.
The status in BBP_PD for the SC is I1111 item in transfer process. Also i checked BBP_PDBEI there the object is BUS2105 and also followon Backend id has been published.
But when i see it R/3 i am nto able to see the PO.
Can you pls. help out trace the error?
With Regards,
Darshan

dharsan
https://wiki.sdn.sap.com/wiki/display/SRM/Howtoanalyzethefollow-ondocumentdetermination
peter method.
however your sc created a number range for Purchase order but really not PO created in ecc system
can you resubmit your shopping cart via clicking follow on docuemnt in monitor sc.
then you will get again real error message in application log or rz20 for the shopping cart.
from that error clearly srm will say why it could not create a PO.
Then you can correct your shopping cart data and it will create a new PO number.
even you hammer /push a shopping cart 10000 times via FM , it will not reach ECC unless you correct the error data in the shopping cart.
muthu

Purchase requisition not getting generated in MD04

Hi,
     if i have my material with MRP type VB & my ROL is 10. Now if my stock at present is 0.74KG & if i do the MRP run with MD02 then my purchase requisition is getting generated.now i delete the purchase req & try it with MD01 for the whole plant but the same does not happen when i do the MRP run with MD01. my purshase requistion for the same material never gets generated. can anyone tell me what m i missing. following parameters are maintained by me in MD01 & MD02
Processing key          NETCH
Create purchase req.    1
Delivery schedules      3
Create MRP list         1
Planning mode           3
Scheduling              1

HI,
Check below threads,
[MDAB - Planning file entries   |MDAB - Planning file entries;
[How to use T-code: MDAB and MDRE|How to use T-code: MDAB and MDRE;
Regards,
Dhaval

User Exit/BADI to change the Purchase Requisition date,creating threw MD02

Hi,
I've a requirement to change the Purchase Requisition creation date.
I'm using MD02 to create Purchase Requisition.
Based on the requirement if the available qty is less than the required quantity,we can change Purchase requisition date.
Please let me know if any BADI's/User Exits we can use for this purpose.
I've checked EXIT_SAPLMEREQ_010. I've kept debugging point nad i run MD02, but it is not stopping in the exit.
we are using SAP 4.6c.
Thanks,
Adi.

Hi Experts,
Could you please give me a suggestion for the above problem???
Thanks,
Adi.

Urgent ! Purchase Requisition not created in Backend Classic Scenario

Similar Messages

Maybe you are looking for