URL one step behind application navigation

I hereby bring this topic up again. It seems that this is no problem anymore to the mass of the users, but I haven't found a final solution, yet. The URL shown in the browser window does not reflect the actual rendered page, but the previous one. Adding the <redirect/> tag causes a violation of the underlaying DTD.
My users have trouble bookmarking the right pages, since the URL is always one step behind.
Bookmarking is just a minor problem, but can anyone tell me a final solution to the problem ?
Thanks in advance

Thank you very much for your reply.
It gave me the hint that theer might still be a missplaced <redirect/> tag. In my large faces-config.xml I missed a <redirect/> outside the navigation-case.
Thanks

Similar Messages

Sort one step behind help

Merry <insert faith here> to all tonight.
I'm doing a sort by dropdown which is bound to a string object in the session bean.
In page1 I do a faultsRowSet.setCommand(getSessionBean1().getChoice())
On change with the dropdown. The trouble is there is a lag between the dropdown variable and when it goes into the method so there seems to be always a lag between variables. Both the variable and the method is in the session bean.
Any ideas would be gratefully accepted.
Cheers Phil.

Hi John,
Unless there's something I missed but when sorting dynamically the table display has a bug (?) for editable fields on current page only other pages are correct (I think editable fields are not refreshed they keep old values, non editable fields are refreshed).
For ex: I have editable textfields on data table, when I resort by choosing field to resort from dropdown box the editable textfields keep old value but non editable fields display new values correctly, I paginate to other pages all fields display correctly when I return to the page where I changed the sort order it still displays wrong date for editable fields.
Now I change these textfields to readonly fields then they displays correct data.
So somehow editable fields are not refreshed with data from rowset.
Futher than this issue, I got an anomaly from UPDATE5, I don't know if other people reported.
I created a new project with UPADTE5.
I created a page PAGE1 with a rowset and data table, it works perfectly,
I create another page PAGE2, I have an error in java code so now I can not bypass as before. So I have to correct the code before go to other pages.
When I go back to PAGE1, all my components on PAGES turned RED on visual designer but when I run it, it worked well. On visual designer my data table now I have on header column, I even lost navigation buttons..when I try to edit the rowset it says I have to choose a table and displayed a list of tables from data source. When I tried to relink data table to the rowset the data table shrinks to a red square...
In one word I have to add again the components...
All components turned red except dropdown box..
Any clues ?
Best regards,
Hung

Install my application in one step

I am finishing my application and I am looking after my users.
How can I distribute my application in one step?
First of all I have to consider that I am using the javacomm2 that needs
to copy some files into the bin and lib jre directories.(not so much users can do it)
Second I packed all my code in a jar file (manifest included),
�how can I create a link into Windows menus?
I want for my users a one step (and cheep) way of getting my product.
Thanks in advance

I think what you need is installshield. Please try it on www.google.com
/Sreenivasa Kumar Majji.
I am finishing my application and I am looking after
my users.
How can I distribute my application in one step?
First of all I have to consider that I am using the
javacomm2 that needs
to copy some files into the bin and lib jre
directories.(not so much users can do it)
Second I packed all my code in a jar file (manifest
included),
�how can I create a link into Windows menus?
I want for my users a one step (and cheep) way of
getting my product.
Thanks in advance

How could I completely get rid of application in ONE step?

Say I installed 10 apps from the phone, in the next sync w/ computer, they got sync'ed into my iTunes. After a few days I deleted 5 of them from the phone, but they showed up again after the next sync -- they were copied from the computer back to the phone.
The only way I have found out to do the deletion in one step is to delete apps from iTunes program "while iPhone is connected", that is a pain in the butt because I usually only sync it once every 2-3 weeks. Every time I sync, I need to spend a lot of tiem cleaning those apps which were deleted on the phone, from iTunes program.
Is there any way I can setup my iPhone or my iTunes, so that an app will be considered DELETED when I do that from the phone?

Here's what you want to do:
1. In iTunes (with your iPhone plugged in), choose your iPhone under Device on the left.
2. Click Applications Tab
3. Choose Sync Applications and Selected Applications
(If you choose All Applications, you will get the behavior you don't want)
Now when you delete an APP from your iPhone, it will remain in iTunes, but will be unchecked
from the list and will not be put back on the iPhone when you sync.
Viola!
Message was edited by: treeplant

I have JDeveloper 9.0.4.0. I don't see Application Navigator.

I don't see application Navigator. The Developers guide mentions I need to install portal add-in. Where can I find the portal add-in ?
The OracleAS Portal Developer Kit (PDK) provides you with the necessary libraries to
install an add-in for Oracle JDeveloper that dramatically increases your flexibility and
productivity when developing portlets. This extension includes two wizards, one for
building JPS-compliant portlets and one for building PDK-Java portlets. Both wizards
guide you through the steps of creating the portlet skeleton and all you need do then is
implement your own business logic.
To obtain the add-in:
1. Visit http://portalstudio.oracle.com.
2. On the left side of the page, click Integration/Utilities.
3. Click Portal Add-In for Oracle JDeveloper to download portal-addin.zip.
4. Click Install Instructions and read and follow the instructions.

You need JDeveloper 9.0.5 to have the Application Navigator window, just download this version from OTN.
Then from the JDeveloper home page on OTN
(http://otn.oracle.com/products/jdev) click on the link to the Extension Exchange to get the portal extension.

How to access Express Application from Oracle Application Navigation

Hi
I have created a Application Express Application. Client want to access this Application as a part of Oracle Application one of the Responsibility Navigation.
How can achieve this?
Regards
Kiran Akkiraju

Scott
Application Express verion
Application Express 3.0.0.00.20
I am using my own Custom Function authentication which will check against eBusiness login Username and password.
When I intially access I get below URL
http://ortest.eatonsteel.com:8010/pls/htmldb/apps.xxapplication_express_pkg.Launch_103_Application
In this URL I was entering eBusiness User Login details and I press OK Button
Then it is redirecting to below URL
http://ortest.eatonsteel.com:8010/pls/htmldb/f?
and it throws below error
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
OK
When I press OK button it is redirecting me to below URL again
http://ortest.eatonsteel.com:8010/pls/htmldb/apps.xxapplication_express_pkg.Launch_103_Application
In this URL again it shows login details. When I enter username and password this time it is logging into the Application correctly. And it redirecting to below URL
http://ortest.eatonsteel.com:8010/pls/htmldb/f?p=103:1:6916299608406263518
Initially when I am trying to access it will not connect.
Regards
Kiran Akkiraju

Passing URL parameters to WD application

Hi!
To pass URL parameters to WD application I currenly inbound plug 'defauld' (of type 'Startup') of main window. I use following code:
types:
    begin of param_t,
      name type string,
      value type string,
    end of param_t.
data: params type standard table of param_t.
data: param like line of params.
wdevent->get_data(
    exporting
      name = '_ALL_URL_PARAMETERS'
    importing
      value = params
It works fine but this plug is called after init methods of the component controller an of the view. So if I want to do something with parameters, I must do in this plug.
Is there way to pass URL parameters in a WD app. so that they were available from the very beginning of the application work i.e. in init method of the component controller etc.?
Thanks!

I had the same requirement too. There are a couple of threads on the subject as well, I've posted in one of them but had no answer:
Re: Read URL Parameters programmatically
The workaround i've used is this, it's definitely not as neat as I would like to since you end up having two initialization methods per controller, WDDOINIT and the one you create (for each controller you want to run code in using the received parameters). Nevertheless, it works:
1) Create an event in your component controller, for example INIT_COMPLETED.
2) Define a new method in your component controller, e.g. INIT_AFTER_WINDOW. This method receives an Importing parameter TYPE tihttpnvp. It uses this received HTTP parameters for the initialization logic and finally raises the INIT_COMPLETED event (This is the method that "replaces" WDDOINIT).
3) In the Window's Inbound plug handler, you get the HTTP parameters (with wdevent->get_data) and afterwards call the method WD_COMP_CONTROLLER->INIT_AFTER_WINDOW (maybe you need to declare the usage previously in the Window to have the reference available).
4) Finally, if you need some of the Views to be initialized afterwards the component controller's INIT_AFTER_WINDOW runs (for example to show some initialization messages), you'll have to replace the WDDOINIT method with an INIT_AFTER_COMPCTRL method and subscribe it to the component controller's INIT_COMPLETED event.
I hope you got the idea, and more importantly, that we get some cleaner solution from SAP for achieving this in the future.
Regards
Edited by: Alejandro Bindi on Nov 6, 2008 10:08 PM
INIT_AFTER_WINDOW is the method to be called on step 3

Dates one day behind after java upgrade to 1.6.0_27

I have upgraded from Java 1.5.0_06 to 1.6.0_27
After the upgrade ,I saw that dates are a day behind.All dates that lie between November 6th to March 10th are correct but dates
lying between March 10th to November 5th for any year are wrong.(one day behind)
Is it something to do with DayLight saying.
I am using GMT-5 Eastern Time(US & Canada) and Server is set to automatically adjust time coressponding to day light saving.
I checked,I get the date correct from database and in the factory class also it is correct,in the servlet it is correct but my Viewclass which calls this servlet shows date one day behind.
I am doing no conversion ,the date fetched from database is stored like
java.sql.Date beginDate= resultSet.getDAte("BeginDate")
Schedule.setBegindate(beginDate)
In the Schedule Object ,the beginDAte is of type Date.
I am adding all dates to a treeset.I do a printout just after setting,it is correct
But in my view class ,its one day behind,no manipulation is done.Dont know why is the day incorrect.
IS it because of Java version.
Please help

As I mentioned That
My view class TestView code is some what like this
public class TestView extends JFrame
public TestView(URL url, AppletContext appletContext)
this.appletContext = appletContext;
SwingUtilities.invokeLater(new Runnable() {
public void run()
testCommand test= new GetDatesCommand();//call factory class which fetches result from database
Object returnValue = TestUtils.callServlet(test);//calls the servlet .
if( returnValue instanceof TreeSet )
TreeSet testSet= (TreeSet)returnValue;
TestView.setDate(testSet));
I am calling this constructor of viewtest class from my LoginTestApplet
public class LoginTEstApplet extends JApplet
public LoginApplet()
TimeZone.setDefault(TimeZone.getTimeZone("EST"));
LoginTestActionperformed()
new testView(getDocumentBase(), this.getAppletContext());
As I mentioned the values of dates as fetched from database ,factory class and getDatesCommand class prints fine.Its just inside this class after the call to servlet ,it displays wrong date.
I have an applet ,LoginTestApplet which is the entry point for my application.Inside the default constructor ,I am doing
TimeZone.setDefault(TimeZone.getTimeZone("EST"));
I have mentioned in my second post what results it shows for getDefaults.
I know its very strange ,the dates gets one day behind immedately only in the view class not in the servlet or the factory class.
Please let me know if I need to post some more data .

Can't see EJB objects in Application Navigator after migration

Hello
I can't see any objects in Application Navigator after migration from previous version of JDeveloper (9.2.0.5), in System Navigator view I can see all sources. Has somebody any idea what the reason is?
Tom

In the application navigator you should see one node per EJB, when you stand on it you'll see the various source files in the structure window.

Import Key Mapping of many Remote Systems in one step

Hi,
I have to update the key mapping of a flat table. My problem is that I have more than 30 remote systems.
Is it possible to import the key mapping of more than one system in one step?
If there is now way to do it with Import Manager can I use APAP API to edit key mapping?
Much thanks in advance
Klaus

Hi Klaus,
Unfortunately it is not possible to update keys for multiple remote system in one go using import manager.
But you can use ABAP API or JAVA API to edit remote key mapping. using these API you can write a program/application to update keys for multiple remote system.
Best Regards,
Shiv

Issue in One step workflow activation for Confirmation in SRM 7.0

Dear Experts,
On working to EXtended Classic Scenario, I am configuring one step approval workflow for Confirmation (good receipt) in SRM 7.0
I have standard customisation for Confirmation and activated below object for one-step approval :
BUS2203 SAVED WS10400002 Event Linkage Activated
(one-step approval)
When I am creating a Confirmation with respect to PO in portal, It is showing Approval Pending but It is not going to Manager for approval. While creation of shopping cart (one step approval) is working fine and SC is going to same Manager for approval.
Kindly suggest me, what else required for it.
Thanks in advance,
Pawan Keshwani

Dear Expert,
I am using Application Control Workflow for both SC and Confirmation. Issue is resolved now by this link
No workflow started. Application error occured
Thanks for your Reply.
Regards,
Pawan Keshwani

One Step DVD quality

I have been reading the posts about using IMOVIE09 and then using IDVD. I understand the quality is not great because of IMOVIE09 and the way it does the import.
IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
Thanks

Hi
IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
YES !
else on Quality and iDVD - my notes
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

One Step DVD

I am new to using this program. I followed the instructions and copied the movie from camera to computer for one step DVD. The computer burned the disc and it then played only part of the movie and with three repeats. It either did not copy all of the mini dv from the camera; or failed somewhere in the process. I thought this was supposed to be quite user friendly. I have been reading the directions.It is less than 60 minutes long. I am using my MacBook Pro X (10.4.9) andhave all of the updates. Any suggestions would be appreciated very much. I am going to try again. Unfortuntely at the moment I only have available -R DVD that cost $3.00 each.
I also tried to burn a disc of a different movie on imovie. It said something about trash needing to be emptied (the regular trash was empty) and then that it was too much.....also less than 60 minutes.
MacBookPro Mac OS X (10.4.9) MacBookPro is OS 10.4.9
MacBookPro and Mac G4 desktop Mac OS X (10.4.3) MacBookPro is OS 10.4.9

Hi Merrymay:
First, to get that trash emptied, shut the mac down and then re-boot.
Your space should return to normal.
As far as OneStep goes...I am not a big fan. Perhaps your best bet is to create and save an idvd project as a disk image. Read this from Len Goff (iDVD Guru):
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
:)Sue

How do i make a new file created appear in the Application Navigator?

I am doing an extension to JDeveloper..How do i make the new file that the user has created to appear in the Application Navigator?
What methods can i use?
These are my codes...but it does not work still...
File file = new File(dir ,fileName);
file.createNewFile();
FileWriter fw = new FileWriter(file, false );
PrintWriter pw = new PrintWriter( fw, true );
Workspace workspace = ctx.getWorkspace();
java.net.URL projectURL = workspace.getActiveProjectURL();
URL url = file.toURL();
Node node = new Node(url);
jpr.add(node, true);
node.open();
NavigatorManager.getWorkspaceNavigatorManager().openNavigator(ctx);
ProjectNavigatorManager.getApplicationNavigatorManager().openNavigator(ctx);
EditorManager.getEditorManager().openDefaultEditorInFrame(node.getURL());

If it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button, and you are limited to your existing folders

Install my program in one step

I am finishing my application and I am looking after my users.
How can I distribute my application in one step?
No all computers have a VM already installed.
First of all I have to consider that I am using the javacomm2 that needs
to copy some files into the bin and lib jre directories.(not so much users can do it)
Second I packed all my code in a jar file (manifest included),
�how can I create a link into Windows menus?
I want for my users a one step (and cheep) way of getting my product.
Thanks in advance

I have tried both of the ones mentioned. IzPack will not put links in the start menu. InstallAnywhere will and also there is a version called Now! which is free.
For what you are doing though you might try webstart from Sun which is also available free. If you are only deploying on Windows there is also the Nullsoft installer which is free at http://www.nullsoft.com/free/nsis/

URL one step behind application navigation

Similar Messages

Maybe you are looking for