Usb flash and truecrypt [Solved]

I'm running kernel 2.6.19. Yesterday installed truecrypt and encrypted my usb flash.
]$ truecrypt --properties /dev/sda1
Enter keyfile path [none]:
Enter password for '/dev/sda1':
Volume properties:
Location: /dev/sda1
Size: 1001111040 bytes
Type: Normal
Encryption algorithm: AES-Twofish
Key size: 512 bits
Block size: 128 bits
Mode of operation: LRW
PKCS-5 PRF: HMAC-RIPEMD-160
PKCS-5 iteration count: 2000
Volume created: Tue Apr 10 20:34:56 2007
Header modified: Tue Apr 10 20:34:56 2007
However when I try to mount it I get:
$ truecrypt /dev/sda1 /media/usbf
Enter password for '/dev/sda1':
FATAL: Module truecrypt not found.
truecrypt: Failed to load TrueCrypt kernel module
then I try as root:
# modprobe truecrypt
FATAL: Module truecrypt not found.
I checked other threads but none of the solutions solved my problem.
Last edited by Alexo (2007-04-24 15:24:15)

$ sudo pacman -Sy kernel26
checking package integrity... done.
loading package data... done.
checking for file conflicts...
error: the following file conflicts were found:
kernel26: /lib/modules/2.6.20-ARCH/modules.alias: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.ccwmap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.dep: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.ieee1394map: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.inputmap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.isapnpmap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.ofmap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.pcimap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.seriomap: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.symbols: exists in filesystem
kernel26: /lib/modules/2.6.20-ARCH/modules.usbmap: exists in filesystem
Question: shall I
$ sudo pacman -U kernel26
or
$ sudo pacman -Sf kernel26

Similar Messages

  • Issue with usb flash and removable hard drives in Lion. (also an install tip)

    Having an issue with my usb flash and removable hard drives.  I plug them in and Lion does not display all my files/folders, I take it out and plug it into my snow leopard machine and all the files/folders are there, does anyone have this issue?
    It does it on my macbook pro which was a snow leopard upgrade to Lion and it does it on my macbook which was a clean install of Lion via a bootable flash drive.
    The computers both work great in all other aspects, so there were no errors on installation. It's plain and simple, some files/folders are not showing up that are present on the drives and viewable on all other non-lion OS's mac and PC.
    Also a word on installs, I highly suggest doing a clean install (delete and reformat drive them install Lion vs a snow leopard ugrade) my machine that was a clean install (macbook) runs 50% faster and smoother than the upgraded one (macbook pro).

    Yes, you can use your backup disk drives in the manner you describe, but Apple provides conflicting information on the subject.
    From Mac Basics: Time Machine
    Time Machine can’t backup to an external drive that's connected to an AirPort Extreme, Time Capsule, or a drive formatted for Microsoft Windows ...
    From Time Machine doesn't back up to AirPort Extreme AirPort Disks
    Time Machine in Mac OS X v10.5 or later can be used to back up to many kinds of Mac OS Extended-formatted drives, but you cannot choose an AirPort Extreme 802.11n's AirPort Disk as a Time Machine backup volume.
    However, you can choose Time Capsule AirPort Disks or internal disks as a Time Machine backup volume.
    They have yet to resolve this discrepancy.
    All other available technical details regarding Time Machine's use seem to indicate that a USB HD connected to Time Capsule should meet Time Machine's requirements. For what it's worth I have been using an external HDD connected to the Time Capsule's USB port and it seems to function just fine.

  • Slatebook x2 - USB flash and SD card at the same time

    Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

    Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

  • Prohibitive sign appears when booting Lion from USB flash and DVD

    Hi There
    I created both a bootable DVD and a USB drive from the Lion download. However I just tried booting my macbook from the DVD and got the "prohibitive sign - ie the circle with a line through it" it was the same when trying the USB flash drive as well. any idea's gratefully appreciated ! BTW my Macbook is a intel dual core.
    I'm currently installing Lion on my Macbook pro from the downloaded image OK so don't think the image is damaged.
    rgs
    Colin

    when you say your MBP is dual core, do you mean core 2duo or core duo?
    http://macs.about.com/od/macoperatingsystems/qt/Mac-Os-X-Lion-Preview-Mac-Os-X-L ion-Minimum-Requirements.htm
    and
    http://www.apple.com/macosx/specs.html

  • [solved] my usb flash and my camera can't be mounted.

    hello, i have a problem i actually solved once with my optical drive which didn't work either, but how do i fix this? should i use fstab again? which directories should i create in /media for this to work?
    thanks in advance for your help.
    Last edited by 1lj4z1 (2011-04-01 18:55:17)

    I'm improved the messaging from my udsks script, so you'll know now why an unmount fails.
    Also, I've dropped notify-send in favour of zenity, though you can easily change it to use another notification program like dzen2 (which I prefer). This last change came about to avoid the problems caused by the implementation of Gnome3 and GTK3.

  • Flash and firefox Solved

    Flash doesn't work for me anymore. I run testing, KDE4. It worked when I first went to KDE4 but not any more. It does work in Opera??
    I checked with about:plugins and flash etc are present!
    Last edited by normc (2008-12-16 05:38:27)

    takedown wrote:
    Just a test mode, put this (!snd-pcsp) in your array of modules on /etc/rc.conf:
    MODULES=( ... !snd-pcsp ...)
    (sorry my bad english)
    Thanks takedown.
    I had one i686 computer I could not get flash working on.  In my case, flash would start up, then just when the progress bar came up and the video should have started, it locked Firefox up completely.  No video or audio.  Couldn't do anything in Firefox and it would require a Force Quit to kill Firefox.  It did it every time.  Looked in rc.conf and it contained the afore mentioned snd-pcsp.  Disabled it with the !, rebooted, and voila, flash worked.
    Pudge

  • Install oralce on usb flash

    can i install oracle on usb flash and use software in other computer with full database and users?

    matrix12345 wrote:
    can i install oracle on usb flash and use software in other computer with full database and users?Do you mean to have the rdbms software AND the database on the flash drive?
    Even if the drive were big enough ..
    Assuming this is Windows ...
    A big part of the Oracle installation on Windows involves the registry. Even if you had a flash big enough for your rdbms and database, you couldn't just plug it in to any computer and run it, because that computer isn't going to have the proper registry settings.
    What is it you are really trying to achive? What you've described is a means to some other end.

  • Using dd leads to my usb flash whose capacity became 512MB from 4G

    I guess that the dd erase the first 512 bytes of my usb.As i know ,the first 512 bytes of my disk is the mbr.But i don't know what is the meaning for usb flash.
    the following two questions:
              1,how can i fix it?
              2,what is the first 512 bytes of usb flash ?
    i will appreciate you.And my english is so poor that i may not describe clearly.
    thank you for everyone .
    now  i use the cfdisk to the usb flash and i find the  the rest of size which just don't have label .
    anyway,it woks well.thank you!!!
    Last edited by detailyang (2013-03-08 12:36:19)

    I think I might have some insight to this problem and have probably done the same thing as the op.  I had an .iso on a 4G usb stick and thought I had dd'd it onto the stick so used
    # dd count=1 bs=512 if=/dev/zero of=/dev/sdb
    to zero out the first 512 mb as in the archwiki.  Now, unfortunately, no matter what I try the usb shows as a 512 MB capacity stick instead of 4G.
    I have a feeling that I had used unetbootin to put some other linux distro on the stick originally so not sure what the dd did to the usb stick in that case.  Googling suggested using gparted to delete the partition table and start anew but all gparted shows is 512 mb unallocated space and won't let me delete it to set a new partition table.
    Dmesg shows
    [18950.800158] sd 9:0:0:0: [sdb] 7669824 512-byte logical blocks: (3.92 GB/3.65 GiB)
    [18950.803166] sd 9:0:0:0: [sdb] Write Protect is off
    [18950.803179] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [18950.806202] sd 9:0:0:0: [sdb] No Caching mode page present
    [18950.806214] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    [18950.824177] sd 9:0:0:0: [sdb] No Caching mode page present
    [18950.824188] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    [18950.842230] sdb: sdb1
    [18950.855152] sd 9:0:0:0: [sdb] No Caching mode page present
    [18950.855165] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    [18950.855173] sd 9:0:0:0: [sdb] Attached SCSI removable disk
    so it is actually a 4G usb stick.  Not sure where to go next and boy do I feel dumb.
    edit:  I guess not so dumb, maybe.  Used
    # dd count=1M bs=4K conv=notrunc if=/dev/zero of=/dev/sdb
    which gave me back my 4G's and then used gparted to create a partition table which threw an error no available disk space but I jus hit Ignore and now it looks okay.
    Last edited by bgc1954 (2013-03-10 22:59:13)

  • [Solved]USB Flash Drive inaccessible.

    Hi there.
    I have installed Arch Linux on my Sony laptop and I have configured it so that most stuff works. The only problem I'm facing now, is that my USB Flash Drive won't show up when I plug it in. I have tried restarting ehci service, but it does not solve anything. I had this problem many years ago with another computer running Linux, but I can't remember how it got solved. Connecting a USB-mouse works perfectly but not a flash drive. The drive is a FAT32 formatted Kingston.
    This is my dmesg log:
    [ 109.300651] usb 2-1.3: new high-speed USB device number 4 using ehci_hcd
    [ 109.613294] Initializing USB Mass Storage driver...
    [ 109.613459] scsi7 : usb-storage 2-1.3:1.0
    [ 109.613577] usbcore: registered new interface driver usb-storage
    [ 109.613579] USB Mass Storage support registered.
    [ 110.614456] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
    [ 110.616674] sd 7:0:0:0: [sdc] 8237056 512-byte logical blocks: (4.21 GB/3.92 GiB)
    [ 110.617821] sd 7:0:0:0: [sdc] Write Protect is off
    [ 110.617835] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
    [ 110.618550] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 110.618561] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 110.621899] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 110.621908] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 110.787723] sdc: sdc1
    [ 110.880634] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 110.880647] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 110.880655] sd 7:0:0:0: [sdc] Attached SCSI removable disk
    Running openbox with PCManFM. Any clues how to solve this?
    Last edited by light (2013-03-17 21:26:26)

    s1ln7m4s7r wrote:
    For what i can see from the log  there is no problem.
    Have you tried to manually mount it? To see if it is a PCManFM issue. Also, have you checked this:
    https://wiki.archlinux.org/index.php/PC … ge_devices
    Hi.
    I tried installing gvfs, apparently I uninstalled it for some reason before.   But it did not help mounting the flash drive. So I tried mounting it manually and it worked (Yaay!). But it complained that my flash drive was not mentioned in fstab. So I looked in fstab and the only ones listed is my root partion "/" and "/home". So how do I add USB mounting to fstab? I'm a little bit confused.
    And one off-topic question: Shouldn't my "/var" partion also be mentioned in fstab?
    Thanks for helping me
    Edit: This is how fstab looks right now
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda2 LABEL=/
    UUID=ed07bdb6-61c6-4cc7-b98d-122a869046f1 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda4 LABEL=/home
    UUID=7448100b-682b-430f-9e59-327ce6f9f22c /home ext4 rw,relatime,data=ordered 0 2
    Last edited by light (2013-03-17 20:54:38)

  • Usb flash drive read only problem [solved]

    Hi, im using spacefm, i have udevil and udisks2 installed, i can read my USB flash drive but i cannot delete files, i tried gparted that use spacefm as well and i can delete files from the usb flash drive with no problems, any ideas?
    i solved i installed ntfs-3g and i can delete files again
    thanks
    Last edited by adcdam (2013-04-08 01:01:22)

    I installed it and got this error : now my Macbook wont even see the flash drive...

  • I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch.  All other components work normally.  In Activity monitor it says Adobe switchboard failed to respond.  Can anyone help solve this issue?

    Release: 4/25/2012
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

  • USB Flash Drive no longer shows on Desktop, it does appear in disk utility. I recently upgraded to 10.8 from 10.6 on both iMac and Macbook and the drive does the same on both.

    I updated my Snow Leopard to Mountain Lion and have had only minor issues with some software but I plugged in a USB flash drive and went to format it, it now appears only in disk utility and not on the desktop. I have tried restarting and reseting with the drive in and out, I tried it into my macbook and it does exactly the same there. I can't do anything in Disk Utility so can't access it in any way and it says errors if I try to eject it from DU. I'm not normally stumped but I can't figure this out at all. I'm hoping that someone here could give me an idea that I haven't thought of as it's a large Flash Drive and I really would like to keep using it.
    Thanks in advance for any help anyone can offer.

    If it has the same (bad) behavior on two different systems then there is a very good chance that the  drive is toast.
    BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
    regards

  • If i use a usb flash drive which is both os and windows compatible can i transfer files from my mac to a windows pc using the same usb flash drive?

    if i use a usb flash drive which is mac os and windows compatible can i use it to copy files from the mac to a windows machine. i have to do some training abroad and wnat to take the files on a usb from the mac but they will only have a windows operating system available to me.

    Generally, it's not the flash drive that makes it compatible, but the formatting used on it.  In Disk Utility on a Mac, the format is called MS-DOS (FAT).  In Windows, I believe it is called FAT32.
    A USB flash drive formatted that way should be readable and writable on both Mac OS X and Windows.  But you may want to try a "trial run" before relying on it for the trip.

  • HT6437 My itunes cannot locate my ipod. All the sync option are grayed out and diagnostics says that itunes cannot find usb ports and that no device is connected when it is. What should I do to solve this issue?

    So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
    When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
    Does anyone know how to solve this issue?

    Do the USB ports work for other devices?
    Does the iPod charge?
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with                  
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • [solved] Suddenly no permissions on specific USB flash drive

    Hi,
    since yesterday I can't delete or create new files on my primary USB flash drive.
    I then tried my other USB drive and it works without a problem.
    Both are from the same manufacturer and formated with the FAT16 file system. When I check the permissions of the files/folder I see myself as owner with read/write permissions on both drives.
    the error message on the console is:
    rm: cannot remove 'foo': Read-only file system
    I'd really like to give you more information but honestly I don't know where to look since one works and the other suddenly stopped working.
    \edit: Checked dmesg:
    [ 769.912866] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain (i_pos 123716903)
    [ 769.912871] FAT-fs (sdb1): Filesystem has been set read-only
    Seems to be the problem. Any ideas?
    Thanks in advance!
    Last edited by Barghest (2012-06-20 07:06:48)

    I wasn't aware that FAT filesystems had a concept of file permissions or ownership...
    First of all, reboot if you recently updated your system. Because the linux package (the kernel) was also updated. Then install and use gparted to format the drive.

Maybe you are looking for

  • Converting DVD videos to iPod format for iPod 30GB 5th generation?

    I would like to convert DVDS to iPod format so I can view them on my new iPod? Can someone help me with a how to list? I have located many PC or windows applications for making the conversion ( free downloads) but what do we use if we are mac users (

  • Error in Costing for Routing not maintained

    Dear Experts We are working on ECC6.0, creating Material Cost Estimates with Quantity Structure. The issue is we want the system to give error when Routing is not maintained for the Inhouse Materials. I've seen system only issues msg CK 461 as a warn

  • Auto mail of purchase order to vendor after final approval(release)

    hello all, my requirement is that.after creation of purchse order and final release,my client want to send the puchase crder automatically to vendor via mail. pls explain me settings for same. i have already search the sdn threads,but not got the exa

  • Error in retrieving session attribute for ejb remote in clustered env

              We store EJB remote object in session and differnt clients retrieve it from sessionbefore           making a business method call. This seems to work in most cases but sometimes           it gives the exception attached. This happens only i

  • Editing JPEGS in ACR -- does it resave my JPEG?

    Apologies if this has been answered, but wasn't sure how to search for this question -- Adobe Camera Raw offers the ability to apply edits to JPEG files in the ACR plugin. If you make any tweaks to the JPEG, the "sidecar" information seems to be save