USB Hubs Not Recognized After Restore

Hello Lenovo Forums!
I have a t61p 6450CTO lovely work laptop that I adore ... upgrading now to 500gb and 4 g of ram ... but I recently restored to original second tier (saved my files) and ... to get Lenovo ThinkVantage working again and System Update. It works great!
Now I cannot upgrade to SP1 on Vista home premium. Also USB HUBS not recognized, (can't print) even after going into bios and updating USB to enable and enable all the time --- AND cannot install Windows Updates except SOME one at a time. So I recently ordered Windows Vista upgrade might help and have a fresh operating system yes?
Any help is appreciated! About to do another restore ... thank goodness for that still working! Steve in Ohio

someone? please

Similar Messages

USB device not recognized after connecting the iphone to PC

Hi all,i have an iphone 3Gs 16 GB.I have some problems with it.Yesterday when I decidet to plug my iphone to PC and update the iOS,windows gives a message:USB device not recognized. ***?! I tried to change the USB cable and no fix,i tried reinstalling iTunes-same thing,I tried on another computer-the same.So in my country there's no apple store just Orange store what sels this mobiles and i took it there, so i'm waiting for the response.What could be with it?! There was no water or physical damage. ?! Thanks a lot

someone? please

IPod not recognized after restoring from Mac format.

Hey,
I used my old iPod photo with my Mac for a long time. Recently I got a new iPod video and enjoy it a lot. I ended up selling my old iPod to my dad on the conditions that I had to put all the music on there for him .
Anyway, I know that Mac formatted iPods aren't recognizable on Windows PC's. Thus, I restored my old iPod to its original factory settings using the iPod software updater/restorer before trying to load my dad's library from the PC. However, the iPod is still not being recognized by the PC. And when I try the update/restore on the PC it says "iPod service error." It does show up in the "My Computer" folder, however it says the disk must be formatted. If I formatted it manually on the PC and then tried restore on the PC would it then work?
Thanks.

NEVERMIND. IGNORE TOPIC. My issue has been resolved.

Fonts not recognized after restore...

Earlier today I had to replace the hard drive in my Mac, and then restored all my files/apps from an external hard drive with Time Machine. The problem I have is that none of my previous fonts are found by any of my applications. When I open Font Book, all my fonts are there...but for example, when I opened Word or Photoshop, no fonts appear in the drop down menus besides the default system fonts.
I double-checked the user>library>fonts folder, and all my fonts are there. What could be causing this???

Cricket311 wrote:
The hard drive going bad happened very suddenly with no rhyme or reason. It was working perfectly fine one day, and the next day it wouldn't boot up. I brought it into the Apple store and had their Genius Bar take a look and they weren't able to repair the hard drive.
If your last backup was late the day before, it's possible something got corrupted.
Do you get the fonts into those menus by some sort of selection process? If so, you might want to look for their preference files. Look at a backup from earlier in the day, or even a day or two before the failure.
Most likely, there will be a file (or files) in +*<your home folder>/Library/Preferences,+* and/or +*<your home folder>/Library/Application Support+* containing the name of the app, or perhaps the name of the maker, and ending in .plist.
It's also possible they'll be not in your home folder, but the top-level Library/Preferences and/or +*Library/Application Support+* folders.
You might want to start with a Finder window, in List mode, of your home folder, then +Enter Time Machine+ and navigate to the folders in question. When you find something that looks promising, right-click it and take the +Quick Look+ option. If it has something that looks like a list of fonts, that may be the culprit. To restore it, click the Restore button at the bottom right.

WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

USB device not recognized after upgrade to Mountain Lion

I just upgraded from 10.6.8 to 10.8.2 (mountain lion)
I use a usb audio interface (the Native Instruments Komplete Audio 6, to be exact) for recording. Prior to the OS update, it was working fine. Post-update, it is unrecognizable by my computer... it doesn't show up in the "sound" panel in system preferences, it doesn't show up in the system profiler. It doesn't exist.
I have posted on the Native Instruments forum as well but I thought maybe someone here has had a similar experience. Thanks!

AgentKol wrote:
Think I should do just that. I am a loyal NI customer but this is annoying. Apogee is probably a better option with Mac.
Agreed, but don't forget about Lexicon, I use one of their Ionix units (U82S) and it has remained flawless, from Snow Leopard to Mavericks. As far as I know all Lexicon devices work with Mavericks, even the cheap little Alpha.

IPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'

iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
oh yeah, bit tight so not willing to spend any money;-)

Apple support:
Network Printer Troubleshooting
Reset Printing System

USB Device Not Recognized

Operating system: Windows Vista
Error: USB Device not recognized
While actively on the computer, we suddenly got a message stating that the USB Device was not recognized. The only thing plugged in to the USB port was a mouse. Tried all the ports, same message. Tried another mouse, same thing. Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked. Tried a URL from MS which is supposed to help with this exact problem and possibly fix it: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices
This didn't work.
Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS. After searching the issue more extensively using Google, I found that several people said to do this:
Shut down the computer
Remove the power plug
Remove the battery
Put the battery back in
Power up the computer (without the power plug)
This forces a hard reset.
Almost as if by magic, the problem disappeared. A much simpler and less technical solution to the problem than what HP recommended!!!!

Hi @yani1015,
Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
1. What is the Exact model of HP Printer you are using?
2. What is your current Operating system, Windows or Mac and which version?
3. Were you able to install the printer?
4. Did you plug in the USB prior to the software prompting you to?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

USB Device Not Recognized issues

I have a Qosmio X505-Q860 and I've been getting the 'USB Device Not Recognized' error constantly for several months. I've never plugged anything into any of my USBs and the error is now causing a nice Blue Screen (which happened about 4 times yesterday within 1 hour). I've tried uninstalling the problem USB hub but it keeps telling me that it failed to uninstall (I'm on my administrator account when doing this). How in the world do I get rid of this so my computer stops crashing and driving me crazy!?
Edit: I should also mention that everything is up to date (I check often and checked just now).
"A stopped clock is still right twice a day."

I suggest trying another USB cable. If you are positive that your cable is not the issue then try resetting the iPod and booting into disk mode (Hold menu+select down until Apple logo appears. Then hold menu+play/pause down and the iPod will go into disk mode, see if the computer recognizes it then. If that works then their is either a software issue on the computer or a firmware issue. Worth trying to restore but backup all your iPod's files first!

USB device not recognized ... any help ?

Hey guys,
So i went to plug my iPhone 3G into my PC running Windows Vista and it comes up with the error message,
"USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Last time this happened I uninstalled the USB Root Hubs on my computer and when they reinstalled my iPhone connected, but it has happened again and this method no longer works.
I've tried restoring my phone, turning it on and off, i tried stopping my computer from turning off my USB ports but to no avail...its getting very frustrating because i can't sync my phone
ANY suggestions would be great PLEASEEEE!
Message was edited by: chris__robin

Try a different port and a different USB cable.

Usb device not recognized on shuffle

i have a belkin usb 2.0 device with 2 ports. it is plugged into my ibm thinkpad laptop. the mouse works fine in both ports -as does a photo scanner. but for some reason, the ipod shuffle is not recognized - i keep getting a green blinking lite and a message that says "usb device not recognized". funny, because the shuffle worked fine the other week when i installed all the software after purchase. i've updated windows software and reset the ipod. i've read elsewhere that some people have had the same problem - and that it was a malfunctioning usb port on the ipod shuffle. if so, what a piece of junk. maybe i just need to call tech support and ask for a new shuffle - i don't think that downloading the updater, etc. will help. any suggestions? thanks.

If it's working with other computers (using the same USB cable to connect the shuffle), then the problem is probably related to your computer.
If you connect something else to the same USB port (like a USB flash drive if you have one), does it work?
If you are using a USB hub to connect the shuffle, be sure to try a port that is directly on the computer. And try more than one port that is on the computer.
Also, it may be helpful to know some other details, such as type of computer (Windows or Mac) and the version of OS.
Since this is a laptop, if it has a main battery that can be removed, you may want to try disconnecting it from power and removing the battery. Leave it that way for a new minutes. Then, put the battery back, start it up, run iTunes first, and try the shuffle again. If there was a problem with your USB ports, that may correct it.

USB device not recognized in Windows 7?

I have the strangest problem I've yet to encounter with my computer.
As you may have guessed from the title, I am constantly getting the message displayed. Any fix that has been suggested has been unhelpful or worked for a bit until my computer restarted again (I'll get to that)
First off it started when I noticed my mouse pointer was acting very weird, it was just a vertical line of dots. A forum said an easy fix to the problem was to update my GPU drivers, which I needed to do anyway. So after an update to the GPU drivers
I log into my computer (which is password protected, this is slightly important to remember) and I try to go to youtube. I click down at the start menu to type in chrome and nothing appeared. I was able to move the mouse around and click on things
but I was unable to type anything.
Luckily for me I have a laptop as well so I checked for any solutions on my laptop and they said that it was a problem with the model of my keyboard specifically This was odd to me considering most of the problems happened OTB for the keyboard and not
a month after use, plus I was able to plug it into my laptop and it worked just fine. When I plugged it back into my desktop it gave me the same problem: I couldn't type anything, I also noticed the little pop-up informing me that the USB device was
not recognized. "Well, great, time to get my backup keyboard," I thought to myself. Except, that was not the case either. I plugged my backup keyboard into every single USB port on my Computer Tower, even going so far as to unplug
the mouse. Absolutely nothing was working. I constantly restarted my computer and each time got the same problem; I'm able to type in my password to log in and then a few minutes after that the USB device stops working. Sometimes after plugging
one of the keyboards back into a USB port I would get a message saying it was installing drivers; and then would fail in installing any.
After a bit I navigate through the menus with just my mouse and do a system restore to before the GPU drivers were installed. After that, I started windows in SafeMode and then turned my computer off. Finally, I unplugged my computer completely
of all plugs (including my power plug), waited a few minutes, then plugged everything back in again. Amazingly, this fixed the problem, but then it got worse.
After about an hour of gaming, my computer BSOD's, most likely because I decided to alt+tab out of Tomb Raider during a loading screen to stop a video I had on. I restart my computer again, and then the problem returns, only this time absolutely
no USB devices work except my one keyboard. The backup keyboard, and both my regular mouse and backup mouse stop working a few minutes after logging in. I try to fix the problem like before, but to no avail. Any USB device I plug in either
gives me the "USB device not recognized" or attempts to install the drivers and then fails.
If there is ANY way to fix this problem, it would be greatly appreciated.

Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

USB-Hub not working on LEFT USB port?

Hello,
I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
Thanks in advance!

I think I've hit a variation on the problem you're enoucntering. I have a late-2013 13-inch Macbook Pro Retina. I've just installed Boot Camp and a copy of Windows 7 Pro. This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception. Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub. I set up Boot Camp to boot into Windows and attempted to boot. It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot. It just rebooted over and over. I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine. Once it was booted into Windows, I could attach the the hub and everything would be recognized normally. Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine. But it simply refuses to boot the USB hub attached. I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231. The suggestion is that only certain hubs to not work. I've got two different high quality powered hubs and both display the same behaviour. The other point is, that when booting into OS X with the same hub, it works perfectly. So it's a strange problem.
Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case. I do have one more hub to try (built into my Dell monitor). I'll report back if that happens to work.

USB is not recognizing the device and giving error 10

My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

USB Hubs Not Recognized After Restore

Similar Messages

Maybe you are looking for