"Use condition indicators" and "Print setting" errors when updating FM book

I recently updated the designs of some templates used in our FM books. I created a sample manual using the new templates to test it out. When updating the book, I get the following errors. I have fixed errors before, but I've never seen these ones.

Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo.

Similar Messages

JBO-26030 and ORA-00054 error when updating a certain row

I have a page that saves data when you leave a cell in a table. Everything seems to work fine, but when you get to some cells the JBO-26030 error pops up and then no matter what you do you can't ever save anything on that cell. You can close everything down and reopen and change other cells, but when you go back to that cell the error message always pops up. I think it's mainly happening on the cell that is a drop down with 3 values (P, F, and NT). P is the value and key for the drop down.
Then when I go into the database through Toad I try to change the value just so see what happens and that's when I get the ORA-00054: resource busy and acquire with NOWAIT specified error. This again only happens when editing that row.
Any help is appreciated...Thanks!
Edited by: user10942416 on Aug 6, 2009 6:16 AM

This error is caused when the block property 'DML returning values' equals YES. This property was introduced as of forms 6. What does it do ? As per the on-line help of Forms, "A database update or insert action may initiate server-side triggers that cause alterations or additional changes in the data. In Release 6, when using an Oracle8 database server, Forms uses the DML Returning clause to immediately bring back any such changes. When this property is set to Yes, Forms will automatically update the client-side version of the data, and the user will not need to re-query the database to obtain the changed values". When this property is switched to yes the generated insert/update statement will contain the 'returning clause' and this clause is causing the error.
As far as I have tested, the only way at present, to get rid of this error is to set 'DML returing values' to NO. So, not to use this functionality.
See also:
http://support.oracle.co.uk/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=143395.1
Please respond if this solution works for you.
Greets,
Guido Zeelen

Why don't ALL pages process and print in iphoto when creating a book?

I have created a book using iphoto 6. All the pages are there when I see them on the screen, but when I go to assemble the book and do the preview as suggested before ordering only the first 20 pages are there. The last 20 pages are missing.
If I save as pdf file the same thing happens only the first 20 pages are there.
Any suggestions? Any Ideas?

That issue was discussed in the iPhoto 6 forum at length. I don't remember the exact topic but you can search in the iPhoto 6 forum and find the thread.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Error when updating to 4.2

My Ipod Touch is on ios 2.2.1 and always get error when updating to 4.2

I think you have a 1st Gen iPod Touch. You can only go up to iOS 2.2.1 OR you can purchased the iOS 3.1 firmware.
http://support.apple.com/kb/ht2052
Purchase the iOS 3.1 Software Update directly from the iTunes Store.
IF NOT, then try to get a better internet connection (if connect with Wi-Fi) or wait a while and try to reupdate again. If you have to make sure iTunes is up to date (iTunes 11.x)
Message was edited by: keeferaf

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Conditional indicators and data buffers

Hi,
when I was reading help on VI memory usage http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/vi_memory_usage/, I did not completely understand the part about Conditional indicators and data buffers.
Could someone provide one or two examples of it?
Thanks,
Andrej
Solved!
Go to Solution.

Hi Jeff,
Sorry that I still couldn't understand the Conditional indicators and data buffers.
I tried checking the code provided by you using "Show Buffer Allocation" in LV2012. I can see that both the code allocates same number of bufferes. i.e., the one which has Conditional indicator also created a buffer as below (Notice black square dot in Add function). If conditional indicator does create additional buffers as you explained in previous post, why equal number of buffer is created in non-conditional indicators also? Can you please explain this?
Thanks,
Ajay.
Attachments:
Conditional Indiator.png ‏34 KB

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Office jet 6700 printer jam error when there is no printer jam

I get a continuous printer jam error when there is no jam present. I have tried connecting and reconnecting. Same error.

Hi @lbrockhurst
Although you are not experiencing a true paper jam, the solutions presented in the following document might help to resolve the issue; A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri...
As you will see in the document above, paper jam messages are not only a result of physical paper jams;
The following factors can cause paper jams:
Paper loaded incorrectly in the paper tray.
Damaged or dirty paper rollers.
Torn, wrinkled, or damp paper loaded in the paper tray.
The rear access door or two-sided printing accessory (duplexer) might not be closed or is not locked into place.
Paper was added to a stack already in the tray while the HP product was printing.
The tray contains more than one type of paper.
The paper is jammed inside the HP product where you cannot see it.
An obstruction is blocking the paper path.
Torn pieces of paper from a previous jam are stuck in the product.
The tray is too full.
If printing on an envelope, the edges of the envelope are bent.
I have also seen communication hiccups cause such error messages. This may sound silly, but if the issue persists, after completing the steps in the document I provided, let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection.
I hope this heps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.Can someone answer it?

Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.I tried doing the following still the email sync is not working.?
Here's the step by step:
1. Go to Settings --> Notifications --> Mail --> Select any of your email accounts
2. Notification Center: ON
3. Alert Style: Banners or Alerts (I've only tested it to work with Banners...)
4. Show Preview: ON
5. View in Lock Screen: ON

Hi uneleashurself and thanks for your answer.
Forgive my language but getting to talk to the Safaricom customer service is a real pain in the **bleep** - if you ever get to talk to them, that is.
I've never got an answer to my phone calls in three years and their customer assistans in the shops usually have no clue about whatever it is you're asking them.
I talked to a few of them in a couple of different Safaricom shops and they didn't know what I was talking about.
Still, I believe Safaricom is not the problem as other people I know who have a BlackBerry on Safaricom haven't experienced this problem.

Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
Thank you

Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
You can probably be absolutely sure any other source will be carrier locked
It also appears that only Zain offer unlocking (of all the ME carriers ) in Jordan and Bahrain
A ME iPhone 5 ( A1429 GSM )will not work on US LTE when you return

Page and Print Set-Up in P6.2

Can you save your page set-up (page size etc.) and print set-up (printer, including Adobe) with your layout save?

michigan mike wrote:
Can you save your page set-up (page size etc.) with your layout save?YES
.. and print set-up (printer, including Adobe) with your layout save?NO. not with the layout, but print driver default settings. more to do with the client machine OS.
try 1st and 2nd buttons in the "print preview" icon bar.
best of luck

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?

solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading .....

I have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

i have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

it says we could not complete your itunes store request an uknown error occurred (-9808)
there was an errorin the itunes store. please try again later. I plug in my ipod to update it and it says that?

Why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

Morning thomas b olsen
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
http://support.apple.com/kb/ht4356
How to print in iOS
You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
To print, follow these steps:
Tap the action icon .
Tap the Print button.
Select the appropriate settings, and then tap Print.
Important: If you are printing for the first time, or if the previously selected printer is not available, you will need to select a printer before step 3.
Note: AirPrint displays only the essential printer options that apply to the document or image being printed. Details such as media type, page size, and orientation are automatically determined at print time.
Hope this helps,
Mario

"Use condition indicators" and "Print setting" errors when updating FM book

Similar Messages

Maybe you are looking for