User Interface Problem : Dropdown does not dissapear on window close

Hi all,
I am seeing a strange behaviour in dropdowns on popup windows.
1. Open a window with a dropdown attached to it.
2. Select the dropdown so that the dropdown values become visible in the menu.
3. Close the window through an action / button.
See that the dropdown menu is still enabled and onscreen despite the container no longer being visible.
Is there a call that needs to be made prior to closing the window to ensure that all its subcomponents are gone? This is on sp6.

Armin is right. It is a CSF bug..I have seen this error. But this error wasn't consistent in my app..

Similar Messages

  • User Interface - auto detect does not work

    I have added the jQuery Mobile User Interface with Theme 50 to an old APEX 4.1 Application.
    When adding the new User Interface i checked the "auto detect" feature in the old User Interface.
    "Auto detect"- Help says:
    Select whether the appropriate user interface should be automatically detected. If auto-detection is enabled, the user will be redirected to the corresponding login page or home page.
    When calling the Application (only with the application-id) from my nexus 4 smartphone the application does not switch to the mobile Login page.
    Do i have to change any old settings or themes?
    Thanks so far

    You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
    Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
    This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
    done i some hours.
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • Interface for Excel does not work in Windows 7 - Important

    Hi,
    Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
    What do you suggest to do?
    Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
    The issue is that users that have every access controlled by BPF's (using Interface for Web)  cannot work.
    Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
    Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
    Also Im working with a Vista system, Office 2003.
    For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines  (7 and Vista) cant.
    Please help !
    Velázquez

    Hi Velázquez,
    Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
    So you have to revert to IE8.
    Only IE8 and IE7 are supported in 7.5 MS.
    Hope this helps.
    Karthik AJ

  • User Profile Incremental Sync does not views changes in profiles.

    User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD. 
    All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
    1.profile property is set up to sync with AD attribute (with EXPORT).
    2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
    3. sharepoint server 2010 SP1, "CU June 2012"  14.0.6123.5002
    4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
    there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
    which I resolved by clearing timer service cache.
    Help with advice, urls or solurions please..

    Hi  VlH,
    According to your description, the issue can be caused by the Profile or Profile Values table.
    You can check the event log and ULS log to see detail error message.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    For your issue you can refer to the similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
    Also a good blog for user profile synchronization:
    http://www.harbar.net/articles/sp2010ups.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • "The interface name given does not specify a valid and existing interface."

    Hi nice guys,
     I'm trying to use the XNET APIs to set Master task to Slave with LIN protocol. As I have no Experience before, there's something problem like the Interface of the NI USB-8476S can't be detected. The prompted windows presents following infomation:
    Error -1074384758 occurred at XNET Create Session (Signal Output Single-point).vi:1
    Possible reason(s):
    NI-XNET: (Hex 0xBFF6308A) The interface name given does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained using MAX, XNET system properties, or the LabVIEW XNET Interface IO name. If you are using CompactRIO, refer to the topic "Getting Started with CompactRIO" in the NI-XNET Hardware and Software Help.
    but in the NI MAX, the device is detected as "LIN0". Even the interface input control in the NI examples shows the error. But if I take the CAN Frame API, it works well.
    Does anyone have some idea. I'm so preciate. Tanks in advance.
    best regards
    Melo

    Melonetern,
    When do you receive these errors?  Does this happen when you try to run your code or our examples?  On top of that, does this error happen immediately or does it take a while?  Is this happening in LabVIEW or another interface?
    If you could give us the versions of software you are using as well as the XNET driver versions that would be very helpful.
    Matt J
    Professional Googler and Kudo Addict
    National Instruments

  • Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

  • The app store is blocked, the message "load now", "apple store is loading" does not dissapear

    The app store is blocked but only on my iphone 4s, the message "load now" apple store is loading" does not dissapear. (Before, I have tried to upload the free of charge  "Apple Store" App directly on the mobile) - > But being connected with my pc, dowloads of apps on th epc and uploads of my iphone are still possible.
    Who can help me??

    Daniela...
    Might be a problem with Wi-Fi on the iPhone.
    Tap Settings > General > Reset > Reset Network Settings
    If you still can't connect to the App Store (same as iTunes Store), try here >  Can't connect to the iTunes Store

  • HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

    My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

    This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I can not open my Safari. It quits unexpectedly. The issue happens with a single user account. It does not happen to anyone else in my family. Please help.

    I can not open my Safari. It quits unexpectedly. The issue only happens to a single user account. It does not happen to anyone else in my family. Please help!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • HT204291 Airplay intermittent problem, why does not airplay work well anylonger?

    Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
    Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.

    Restart your wifi router

  • Parent directory ./Users/Shared/SC Info does not exist

    When I repair my Permissions, I always get this message: parent directory ./Users/Shared/SC Info does not exist
    I think it had something to do with Safe Eyes, which I uninstalled.

    Actually, I'm not sure, but I think that message may be normal if you have deleted the folder. The terms "SC Info" folder and "SC Info.sidb" both appear in the '/usr/bin/strings' output for 'DiskManagementTool', which is involved (somehow) with permissions verification and repair. I get the impression from the web that the items have something to do with iTunes DRM...

  • APEX installation failed. ORA-01917: user or role 'FLOWS_FILES' does not...

    Hey All,
    The following environment:
    - RedHat Enterprise Linux AS Update 4
    - Oracle DB EE 10.2.0.1.0
    - OHS 10.1.2.0.0 (Standalone Companion CD)
    * No errors with any of the installs. All working order.
    Application Express 2.2 installation:
    When I ran apexins.sql and passed the following six arguments in the order shown:
    @apexins password adde addeData TEMP /i/ NONE
    I noticed the following set of errors in the error logs:
    grant connect, resource to flows_files
    ERROR at line 1:
    ORA-01917: user or role 'FLOWS_FILES' does not exist
    ... and it goes on and on about the user/role.
    After post installation tasks have been completed, visits to
    http://hostname.domain:port/pls/apex
    result in the following error being displayed:
    wwv_flow.app_not_found_footer_err
    wwv_flow.err      wwv_flow.app_not_found_err
    *Note: My URL shows
    http://hostname.domain:port/pls/apex/apex
    Any ideas or suggestions? I am afraid I have a necessary database account locked, the documentation is off, or I have misconfigured a necessary step.
    Thanks!
    Daniel Nguyen

    You should also double check that the tablespace named addeData actually exists in your database. If it does not, the FLOWS_FILES user will not be created, and that will result in a failed installation.

  • AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'

    Hi,
    There are three different types of APs associated with controller and working fine.
    1.       AIR-LAP1252AG-E-K9
    2.       AIR-LAP1522AG-E-K9
    3.       AIR-CAP1552E-C-K9
    WLC is AIR-CT5508-K9. Software version is 7.4.100.0. Field Recovery Image is 7.0.112.21. Firmware version is FPGA 1.7, Env 1.8, USB console 2.2. WCS is 7.0.240.0 for Windows.
    WCS is sending alarms for AIR-LAP1522AG-E-K9:
    Message: AP is unable to associate. The Regulatory Domain '-E' configured on interface '802.11a' does not match the Controller Regulatory Domain '-C'.
    Before Controller was 7.2.4 (not sure).
    Country configured on WLC is AE and shows -CE regulatory domain. Mesh APs are also associated.
    I believe this Critical alarm should not come.
    how much is this alarm important? What should be done to resolve this?

    Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
    Sent from Cisco Technical Support iPad App

  • Snow Leopard 10.6.8 does not recognize my windows 7 64-bit .iso disc.  PLEASE HELP!

    Macbook Snow Leopard 10.6.8 with bootcamp 3.0 does not recognize my windows 7 64-bit .iso disc.  I recently used it on my mountain lion macbook pro with no trouble. I partioned the disk and when I insert disc and hit continue, mac says it cannot recognize the windows install disc. What could be the problem? Please help, really stuck!

    I was able to import photos in iPhoto and Image capture when I was running SL 10.6.8 on my older MacBook.
    Did you try quitting everything, restart the Mac and then try again?
    Are there any updates at all for the Mac? I was helping one user not all that long ago and there were updates for her Mac software that had nothing to do with the OS and when she downloaded the updates - the iPad was then recognized in iTunes.

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

Maybe you are looking for